Board Handling Equipment - AS Technologies · 2020. 7. 31. · Model C-50LD-M C-50LD-L C-50LJ-M C-50J-L Conveyor Length 500mm 500mm 500mm 500mm Power AC 110/220V ±10V, 50/60HZ Fixed

AS Technologies

Board Handling Equipment AS Technologies GmbH

01.09.2019

AS Technologies GmbH Bitzestr. 13 72336 Balingen www.astechnologies.de Ansprechpartner: Peter Spieß Telefon: +49 7433 513 Telefax: +49 7433 8107 Mobil: +49 1725808580

http://www.astechnologies.de/

Board Handling Equipment

1 | Board Handling Equipment

AS Technologies

Product Contents

Magazine Loader and Unloader

Conveyor

NG/OK Unloader

Bare Board Loader and Unloader

Turn Conveyor

Inverter

Buffer

Traverser

Reject Conveyor

Gate Conveyor

Wave Solder Conveyor

Adjustable Loader and Unloader

Multi Magazine Loader ...................................................................... 2

Multi Magazine Unloader .................................................................. 4

Single Magazine Loader ................................................................... 6

Single Magazine Unloader ................................................................ 8

PCB Conveyor 500mm ................................................................... 10

PCB Conveyor 1000mm ................................................................. 12

PCB NG/OK Unloader ..................................................................... 14

PCB Destacker................................................................................ 16

PCB Push-up Stacker ..................................................................... 18

Vacuum Bare Board Loader ............................................................ 20

PCB Turn Conveyor L-type ............................................................. 22

PCB Inverter ................................................................................... 24

Multifunction PCB Buffer ................................................................. 26

Single Magazine Buffer ................................................................... 28

PCB Traverser ................................................................................ 30

PCB Reject Conveyor ..................................................................... 32

AOI Rework Conveyor .................................................................... 34

Telescopic Gate Conveyor .............................................................. 36

Lowering Gate Conveyor ................................................................ 38

Manual Lift Gate Conveyor ............................................................. 40

Wave Solder Infeed Conveyor ........................................................ 42

Wave Solder Outfeed Conveyor...................................................... 44

Flat Belt Conveyor........................................................................... 46

Adjustable Multi Magazine Loader .................................................. 47

Adjustable Multi Magazine Unloader ............................................... 49



AS Technologies

Multi Magazine Loader

Application

The Multi Magazine Loader is used at the starting of the line for loading of PCB’s to the production line. The unit

loads the production line automatically by pushing PCB’s out of a magazine onto the conveyor of the downstream

machine.

Features

Controlled by Omron PLC.

Easy operation by touch screen.

Multiple pitches selectable.

Automatic magazine change-over.

Tower light display for machine status.

3 magazines loading capability.

SMEMA interface.

CE certified.



AS Technologies

Specifications

Model ML-250A-CT ML-330A-CT ML-390A-CT ML-460A-CT

Size M L LL XL

Power AC 110/220V ±10V, 50/60HZ

Air Pressure 4 - 6 kgf/cm2

Fixed Rail Front

PCB Size 350x(50 - 250)mm 460x(50 - 330)mm 535x(50 - 390)mm 535x(50 - 460)mm

Transfer Height 900 ±20mm or Specify

Transfer Direction left to right or right to left(option)

Magazine Rack Size 350x320x563mm 460x400x563mm 535x460x570mm 535x530x570mm

Pitches 1 - 50, 10mm pitch

Machine Dimension 1365x765x1200mm 1650x850x1200mm 1745x910x1200mm 1745x980x1200mm

Machine Weight 220kg 240kg 260kg 270kg

* Other options available on request.



AS Technologies

Multi Magazine Unloader

Application

The Multi Magazine Unloader is used at the end of the line for unloading of PCB’s from the production line. An

arriving PCB is taken up by the attached conveyor and then pushed into the magazine by the pusher. The magazine

indexes to the next position and is ready for the following unloading cycle.

Features







SMEMA interface.

CE certified.



AS Technologies

Specifications

Model MU-250A-CT MU-330A-CT MU-390A-CT MU-460A-CT

Size M L LL XL

Power AC 110/220V ±10V, 50/60HZ


Fixed Rail Front











AS Technologies

Single Magazine Loader

Application

The Single Magazine Loader is used at the starting of the line for loading of PCB’s to the production line. The unit

loads the production line automatically by pushing PCB’s out of a magazine onto the conveyor of the down-stream

machine.

Features





1 magazine loading capability, discharge magazine from the rear of machine。

SMEMA interface.

CE certified.



AS Technologies

Specifications

Model ML-250A-ST ML-330A-ST ML-390A-ST ML-460A-ST

Size M L LL XL

Power AC 110/220V ±10V, 50/60HZ


Fixed Rail Front











AS Technologies

Single Magazine Unloader

Application

The Single Magazine Unloader is used at the end of the line for unloading of PCB’s from the production line. An

arriving PCB is taken up by the attached conveyor and then pushed into the magazine by the pusher. The magazine

indexes to the next position and is ready for the following unloading cycle.

Features





1 magazine loading capability, discharge magazine from the rear of machine。

SMEMA interface.

CE certified.



AS Technologies

Specifications

Model MU-250A-ST MU-330A-ST MU-390A-ST MU-460A-ST

Size M L LL XL

Power AC 110/220V ±10V, 50/60HZ


Fixed Rail Front



PCB Direction left to right or right to left(option)








AS Technologies

PCB Conveyor 500mm

Application

The PCB Conveyor is used in the PCB assembly line when frequent visual inspection of PCB’s is required, can be

used as an Inspection conveyor or a Linking conveyor.

Features

PLC Control system.

Metal fabricated frame.

Width adjustment system by hand crank.

Motorized width adjustment by switch, Automatic width adjustment by touch screen setting, Automatic width

adjustment by follow me system available on request.

Variable speed control.

Inspection and by pass mode selectable.

Muti-zone concept available on request.

SMEMA compliant.

CE certified.



AS Technologies

Specifications

Model C-50LD-M C-50LD-L C-50LJ-M C-50J-L

Conveyor Length 500mm 500mm 500mm 500mm

Power AC 110/220V ±10V, 50/60HZ

Fixed Rail Front

PCB Width 50 - 350mm 50 - 460mm 50 - 350mm 50 - 460mm

Transfer Speed 1 - 12m/min adjustable

Transfer Height 900 ±20mm

Transfer Direction left to right or right to left (option)

Working Light N N Y Y

Machine Dimension 500 x 650 x 900mm 500 x 750 x 900mm 500 x 650 x 1800mm 500 x 750 x 1800mm





AS Technologies

PCB Conveyor 1000mm

Application

The PCB Conveyor is used in the PCB assembly line when frequent visual inspection of PCB’s is required, can be

used as an Inspection conveyor or a Linking conveyor.

Features

PLC Control system.

Metal fabricated frame.


Motorized width adjustment by switch, Automatic width adjustment by touch screen setting, Automatic width

adjustment by follow me system available on request.

Variable speed control.

Inspection and by pass mode selectable.

Muti-zone concept available on request.

SMEMA compliant.

CE certified.



AS Technologies

Specifications

Model C-100LD-M C-100LD-L C-100LJ-M C-100J-L

Conveyor Length 1000mm 1000mm 1000mm 1000mm

Power AC 110/220V ±10V, 50/60HZ

Fixed Rail Front

PCB Width 50 - 350mm 50 - 460mm 50 - 350mm 50 - 460mm

Transfer Speed 1 - 12m/min adjustable


Transfer Direction left to right or right to left (option)

Working Light N N Y Y

Machine Dimension 1000 x 650 x 900mm 1000 x 750 x 900mm 1000 x 650 x 1800mm 1000 x 750 x 1800mm





AS Technologies

PCB NG/OK Unloader

Application

The PCB NG/OK Unloader is used for good/bad PCB separation. The PCB's are collected from upstream machine

onto a shuttle conveyor and pushed into designated magazine. Shuttle conveyor moves sideways between upstream

machine and magazines.

Features



Good and bad PCB’s can be separated automatically with magazine rack.

Multiple pitches selectable, automatic magazine change-over.


3 magazines for good PCB’s, 3 magazines for bad PCB’s loading capability.



AS Technologies

Specifications

Model UNG-250A-CT UNG-330A-CT UNG-390A-CT UNG-460A-CT

Size M L LL XL

Power AC 110/220V ±10V, 50/60HZ


Fixed Rail Front











AS Technologies

PCB Destacker

Application

The PCB Destacker is used for loading bare board onto the PCB assembly line. A large stack of boards are placed

above the ESD belt conveyor, the mechanism separates the bottom PCB from the stacker and lowers it onto the edge

belt conveyor.

Features



Large capacity.

By pass mode selectable without removing PCB stack.

Motorized width adjustment by touch screen button.




AS Technologies

Specifications

Model DU-350A-CT DU-460A-CT

Power Supply AC 110/220V ±10V, 50/60HZ

Air Supply 4 - 6 kgf/cm2

Fixed Rail Front

PCB Size 460x(50 - 350)mm 535x(50 - 460)mm



Machine Dimension 600x850x1270mm 600x950x1270mm

Machine Weight 190kg 230kg




AS Technologies

PCB Push-up Stacker

Application

The Push-up Stacker is used for restacking un-populated boards at the end of the line. Stacking is done by a

pneumatic lifter, which gently raises the PCB’s from the belt conveyor and adds the PCB, one by one, to the

bottom of the stack..

Features



Large capacity.



SMEMA interface.

CE certified.



AS Technologies

Specifications

Model SU-350A-CT SU-460A-CT



Fixed Rail Front

PCB Size 460x(50 - 350)mm 535x(50 - 460)mm








AS Technologies

Vacuum Bare Board Loader

Application

The Bare Board Loader is used for automatically loading unpopulated boards at the beginning, or in the middle of a

PCB assembly line. A stack of bare boards is placed underneath the belt conveyor. The bare boards are lifted one by

one from the stack by vacuum and are gently lowered onto the belt segment ready for the downstream machine.

Features



Large capacity.

By pass mode selectable without removing PCB stack.

Flexible suction design, suction position adjustable.



SMEMA interface.

CE certified.



AS Technologies

Specifications

Model SL-350A-CT SL-460A-CT



Fixed Rail Front

PCB Size 460x(50 - 350)mm 535x(50 - 460)mm








AS Technologies

PCB Turn Conveyor L-type

Application

The 90° PCB Turn Conveyor is used for changing the direction of flow of a PCB assembly line. The PCB is transferred

onto the built-in belt conveyor which turns either 90° clockwise or counter clockwise.

Features



By pass mode selectable.


Sensor protection more safely.

It’s controlled with motor, rotate smoothly and accurately.


SMEMA compliant.

CE certified.



AS Technologies

Specifications

Model TC-350A-CT TC-460A-CT



Fixed Rail Front

PCB Size 460x(50 - 350)mm 535x(50 - 460)mm



Turning Direction 90° clockwise or counter clockwise(option)




Option: T-type PCB Turn Conveyor



AS Technologies

PCB Inverter

Application

The PCB Inverter is used for inverting / flipping the PCB’s to process the board at both sides without manual

handling.

Features





Sensor protection more safely.


SMEMA compliant.

CE certified.



AS Technologies

Specifications

Model IC-350A-CT IC-460A-CT



Fixed Rail Front

PCB Size 460x(50 - 350)mm 535x(50 - 460)mm








AS Technologies

Multifunction PCB Buffer

Application

The Multifunction PCB Buffer is used for buffering PCB’s in LIFO, FIFO, Pass-through mode between SMT

machines to improve working efficiency.

Features

Controlled by Omron PLC and servo motor.


3 operative modes: FIFO (first in first out), LIFO (last in first out), pass through. Reject mode is available on

request.


24 PCB’s storage capability.


SMEMA compliant.

CE certified.



AS Technologies

Specifications

Model BL-350A-CT BL-460A-CT



Fixed Rail Front

PCB Size 460x(50 - 350)mm 535x(50 - 460)mm

Buffer Capacity Max. 24 PCB’s at pitch 1








AS Technologies

Single Magazine Buffer

Application

The Single Magazine buffer can be used as a mid-line loader or unloader, as a LIFO and FIFO buffer.

Features



5 operative modes: Loader, Unloader, FIFO (first in first out), LIFO (last in first out), pass through. Reject mode is

available on request.


1 magazine loading capability, discharge magazine from the rear of machine.


SMEMA compliant.

CE certified.



AS Technologies

Specifications

Model SBL-250A-ST SBL-330A-ST SBL-390A-ST SBL-460A-ST

Size M L LL XL

Power AC 110/220V ±10V, 50/60HZ


Fixed Rail Front











AS Technologies

PCB Traverser

Application

The PCB Traverser is used for transporting boards from one line into two lines or vice versa. The orientation of the

board is not changed during traversing.

Features



Width adjustment by hand crank.


Traversing length specified.

Configuration upon request.

Front and rear stop positions by touch screen setting.

SMEMA compliant.

CE certified.



AS Technologies

Specifications

Model SC-350A-CT SC-460A-CT


Fixed Rail Front

PCB Width 50 - 350mm 50 - 460mm

Traversing Length specified



Machine Dimension 500*W*1100mm 550*W*1100mm

Machine Weight Depends on traversing distance Depends on traversing length




AS Technologies

PCB Reject Conveyor

Application

The PCB Reject Conveyor is designed for good/bad PCB separation. It can also be used when visual inspection of

the PCB is required without interrupting the PCB flow. The PCB is lifted up from the conveyor by metal fingers,

enabling the following PCB’s to continue downstream.

Features






SMEMA compliant.

CE certified.



AS Technologies

Specifications

Model C-100RC-M C-100RC-L



Fixed Rail Front

PCB Size 50 - 350mm 50 - 460mm








AS Technologies

AOI Rework Conveyor

Application

The AOI Rework Conveyor is used for good/bad PCB Separation. The center segment pneumatically move up/down

allowing separation without interrupting the flow of good PCB’s.

Features




3 belt segments, providing possibility to buffer one failed PCB and three good PCB’s.



SMEMA compliant.

CE certified.



AS Technologies

Specifications

Model C-150LR-3-M C-150LR-3-L



Fixed Rail Front

PCB Size 50 - 350mm 50 - 460mm








AS Technologies

Telescopic Gate Conveyor

Application

The Telescopic Gate Conveyor is used for creating a passage in the PCB assembly line to give the operator access

to the rear of the production equipment. The integrated conveyor segment slides across the opening upon request

from the downstream machine when a board enters the unit. The conveyor returns to its retracted home position as

the board is released, leaving a normally open passage in the line.

Features



Fully opening gate passage allows operator in/out freely.

Through beam sensors for additional safety

Motorized width adjustment.

SMEMA compliant.

CE certified.



AS Technologies

Specifications

Model TG-350A-CT TG -460A-CT


Fixed Rail Front

Walkway Max. 900mm adjustable

PCB Size 460x(50 – 350)mm 535x(50 – 460)mm



Machine Dimension (750-1700)x720x1180mm (750-1700)x820x1180mm





AS Technologies

Lowering Gate Conveyor

Application

The Lowering Gate Conveyor is used when a passage way is required in a production line.

Features


Ergonomic air pressure supported opening and closing.

Automatically gate lifting down by pushing button.

Pneumatic locking device installed to enhance safety.


SMEMA compliant.

CE certified.



AS Technologies

Specifications

Model GC-350L-CB GC-460L-CB



Fixed Rail Front

Walkway 500mm

PCB Size 460x(50 - 350)mm 535x(50 - 460)mm








AS Technologies

Manual Lift Gate Conveyor

Application

The Manual Lift Gate Conveyor is used when a passage way is required in a production line, by manual lifting the

conveyor section, access is gained to the rear of the line.

Features


Cylinder assisted lifting motion.

Pneumatic locking device installed to enhance safety.



SMEMA compliant.

CE certified.



AS Technologies

Specifications

Model GC-350A-CB GC-460A-CB



Fixed Rail Front

Walkway 600mm

PCB Size 460x(50 - 350)mm 535x(50 - 460)mm








AS Technologies

Wave Solder Infeed Conveyor

Application

The Wave Solder Infeed Conveyor is used to transfer PCBs/Pallets into the wave soldering machine.

Features

Robust and stable design.

Variable conveying speed control.

Smooth and parallel width adjustment.

Adjustable inclination angle.

CE certified.



AS Technologies

Specifications

Model C-120LC-L


Fixed Rail Front

PCB Width 50 - 460mm


Machine Dimension 1000x700x900mm

Machine Weight 50kg




AS Technologies

Wave Solder Outfeed Conveyor

Application

The Wave Solder Outfeed Conveyor is used to unload PCBs from the inclined conveyors of wave solder and to then

lower the soldered boards to a standard conveyor height.

Features

Angle adjustment at input and output ends.

Heat-resistant, ESD belt with non-slip surface.

Heavy-duty aluminum construction.

Optional fan attachment for extra cooling capacity.

CE certified.



AS Technologies

Specifications

Model C-120LW-L


Fixed Rail Front

PCB Width 50 - 460mm


Machine Dimension 1200x500x(750 – 1200)mm

Machine Weight 60kg




AS Technologies

Flat Belt Conveyor

Application

The Flat Belt Conveyor is used for smooth transfer of PCBs when edged conveyors can not be used. It can be made

to meet customer’s requirements, it is available in any length and width.

Features

Sensors controlled (optional).

Heat-resistant, ESD belt with non-slip surface.

Customized length and width.

Specifications


PCB Width customized



Machine Dimension customized



Features







SMEMA interface.

CE certified.


AS Technologies

Adjustable Multi Magazine Loader

Application

The Adjustable Multi Magazine Loader is used at the starting of the line for loading of PCB’s to the production line.

The unit loads the production line automatically by pushing PCB’s out of a magazine onto the conveyor of the

downstream machine.


Features







SMEMA interface.

CE certified.


AS Technologies

Specifications

Model ML-460AC4-CT

Power AC 110/220V ±10V, 50/60HZ


Fixed Rail Front

PCB Size Min.: 50x50mm, Max.: 535x460mm



Magazine Rack Size 355x320x563mm, 460x400x563mm, 535x460x570mm, 535x530x570mm



Machine Weight 290kg



Features







SMEMA interface.

CE certified.


AS Technologies

Adjustable Multi Magazine Unloader

Application

The Adjustable Multi Magazine Unloader is used at the end of the line for unloading of PCB’s from the production

line. An arriving PCB is taken up by the attached conveyor and then pushed into the magazine by the pusher. The

magazine indexes to the next position and is ready for the following unloading cycle.


Features







SMEMA interface.

CE certified.


AS Technologies

Specifications

Model MU-460AC4-CT

Power AC 110/220V ±10V, 50/60HZ


Fixed Rail Front

PCB Size Min.: 50x50mm, Max.: 535x460mm



Magazine Rack Size 355x320x563mm, 460x400x563mm, 535x460x570mm, 535x530x570mm



Machine Weight 330kg


Documents

Board Handling Equipment - AS Technologies · 2020. 7. 31. · Model C-50LD-M C-50LD-L C-50LJ-M C-50J-L Conveyor Length 500mm 500mm 500mm 500mm Power AC 110/220V ±10V, 50/60HZ Fixed