BLACKBURNS METALS - SIGN & DISPLAY

82 www.blackburnsmetals .com

176 BLACKBURNS METALS LIMITED

Nationwide supply solutions for aluminium,stainless steel, non-ferrous alloys andthermoplastic sheet products...

Blackburns are one of the UK’s leading nationwide stockholders of aluminium,

stainless steel, non-ferrous alloys and semi-finished thermoplastic sheet products.

Its name has become synonymous with high quality products and services with

a reputation for innovative products and supply solutions.

Local stock is enhanced further by a central facility which carries over 10,000

tonnes of material in 200,000 square feet of warehouse space, all of which is

available on a daily basis to a network of strategically placed service centres,

providing immediate stock availability and local service to a wide range of

industries and market sectors.

Focused on the requirements of its customers, a significant investment has been

made in fabrication and processing facilities, allowing Blackburns to supply

material closer to final form, creating a real opportunity for a one-stop shop.

Blackburns remains responsive to the constant fluctuations in demand faced by

industry and with the ability to supply most parts of the UK within 24hrs, they are

committed to building long term cost saving relationships with their customers.

Contact your local Blackburns today...(see back cover for locations and contact details)

83SIGN & DISPLAY MATERIALS - Innovation, Quality, Service...

ALUMINIUM RAILS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84ALUMINIUM TEE SECTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85ALUMINIUM EXTRUSIONS - WALLBOARD SECTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86ALUMINIUM EXTRUSIONS - MISCELLANEOUS SECTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88ALUMINIUM ROUND POSTS & SQUARE POSTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90STEEL ROUND POSTS & SQUARE POSTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91BUCKLE SYSTEMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92STAINLESS STEEL BANDING SYSTEMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93STAINLESS STEEL CLIP SECTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .94TWO PIECE UNI-CLAMP & COMPLETE OFFSET BRACKET ASSEMBLIES . . . . . . . . . . . . . . . . . . . . . .95ROAD TRAFFIC SIGNS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96ALOCHROMED & PAINTED SHEET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96ALUMINIUM CIRCLES, TRIANGLES, OCTAGONS & BLANKS (+ BOLLHOFF RAILS) . . . . . . . . . . . . .97PERMANENT ROAD TRAFFIC SIGNS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98PLASTISOL COATED STEEL CIRCLES, TRIANGLES, SHEET & BLANKS (+ BOLLHOFF RAILS) . . . . .98GRP CIRCLES, TRIANGLES & SHEET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100BCP TRAFFIC COMPOSITE SHEET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102BCP HOARDING PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102BCP TEMPORARY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103BCP COMPOSITE TRAY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103STAINLESS STEEL SHEET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103COMPOSITE SIGN TRAYS, POSTS & FINIALS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104SIGN KITS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106FRET WORK & BESPOKE SIGNS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106BCP COMPOSITE SHEET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110FOAMED PVC SHEET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112CELUKA SHEET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114BFP - BLACKBURNS FLUTED PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116CAST ACRYLIC SHEET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120POLYCARBONATE SHEET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .122STEEL COLOR® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .124MIRROR SHEET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128PATTERNED SHEET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .131RAL COLOUR GUIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132

Contact your local Blackburns today...(see back cover for locations and contact details)

Blackburns Sign & Display Materials...

Blackburns are market leaders for the supply of component parts to the commercial andtraffic sectors. With a comprehensive range of sign components and ‘semi fabrication’options, sign makers are able to choose between buying individual components such asaluminium painted sheet, rails or posts as separate items, or in kit form with bespokefabrication to the customers finished requirements. Blackburns have the ability toproduce bespoke sign trays or cassettes and intricate shape signs for external andinternal purposes.


5000mm � � �

Aluminium Rails

SMALL RAIL

MEDIUM RAIL

LARGE BOLLHOFF RAIL

MEDIUM INTERLOCK

LARGE INTERLOCK

3000mm � � �

5000mm � � �

6000mm � � � �

6000mm � �

5000mm � �

6000mm � �

6000mm � �

3000mm � � � �

5000mm � � � �

PAINTED PAINTED PAINTED MILL LENGTH GREY BLACK WHITE FINISH (BS 381C/693) (RAL 9005) (RAL 9016)

SMALL FLANGED RAIL

85Sign & Display Materials

AluminiumTee Sections

SMALL TEE SECTION

LARGE TEE SECTION

3000mm � � � �

5000mm � � � �

3000mm � � � �

5000mm � � � �

HOLLOW TEE (Expands Large and Large Interlock Aluminium Rails)Allows the length of Large, and Large Interlock Aluminium Rails (page 84)to be increased by connecting two pieces of sign channel.

The Hollow Tee component is inserted inside the Aluminium Rail andanother piece attached - Ideal for signs exceeding 6 metres in length.

PAINTED PAINTED PAINTED MILL LENGTH GREY BLACK WHITE FINISH (BS 381C/693) (RAL 9005) (RAL 9016)

For information on ourrange of Offset Bracketsand Complete OffsetBracket Assemblies,please see Page 95.

SUPPORT &SIGN STIFFENING CD

Blackburns Metalsoffer a SignloadProgram for Supportand Sign Stiffeningto BS EN 12889/1-2007(System Requirements:Windows 2000, XP and Vista)

For further details pleasecontact your nearestBlackburns service centre.

(see back cover for locationsand contact details...)

HOLLOW TEE


WallboardSections

FOR 1/8” BOARD

WallboardSections

FOR 3/16” BOARD

WallboardSections

FOR 1/4” BOARD

1⁄8” 1⁄8” Continual Run End Stop

3⁄16”Continual Run

3⁄16”End Stop

1⁄4” 1⁄4”

Continual Run End Stop


WallboardSectionsFOR 1/2” BOARD

WallboardSectionsFOR 3/4” BOARD

WallboardSectionsFOR 1” BOARD

1⁄2” 1⁄2” Continual Run End Stop

1⁄2” 1⁄2” External Corner Internal Corner

1142 953 3⁄4” 3⁄4” Continual Run End Stop

1143 1144 1” 1” Continual Run End Stop


MiscellaneousSections

924 926 9270.179 kg/m 0.394 kg/m 0.506 kg/m

807 855 857 0.506 kg/m 0.271 kg/m 0.167 kg/m

733 734 8060.190 kg/m 0.210 kg/m 0.381 kg/m


928 929 952 972 0.430 kg/m 0.368 kg/m 0.176 kg/m 0.271 kg/m

Hanging Z Section0.137 kg/m


AluminiumRound Posts

AluminiumSquare Posts

50mm � � � �

76mm � � � �

89mm � � � �

Other sizes available upon request

Available in 3m to 6m lengths.

A full range of post caps and base plates are also available with prices on request.

Standard RAL Colours to order.

PAINTED PAINTED ANODISED MILL SIZE Ø WHITE GREY SILVER FINISH (RAL 9016) (BS 381C/693) (AA25)

50 x 50mm � � � �

76 x 76mm � � � �

100 x 100mm � � �

Available in 3m to 6m lengths.

Aluminium Square Posts can also be Anodised Silver on request.

A full range of post caps and base plates are also available with prices on request.

Standard RAL Colours to order.

PAINTED PAINTED PAINTED MILL SIZE WHITE GREY BLACK FINISH (RAL 9016) (BS 381C/693) (RAL 9005)

91

SIZE PVC GREY

Sign & Display Materials

SteelRound Posts

SteelSquare Posts Available on request �

Available from 3m lengths upwards.

A full range of stainless steel clips, post caps and base plates are alsoavailable with prices on request.

50mm � �

60mm � �

76mm � �

89mm � �

114mm � �

140mm � �

168mm � �

197mm � �

219mm � �

Available from 3m lengths upwards.

A full range of stainless steel clips, post caps and base plates are alsoavailable with prices on request.

SIZE Ø PVC GREY GALVANISED


Buckle Systems

Buckles are sold in quantities of 100

TYPE 1 BUCKLE

TYPE 2 BUCKLE

TYPE 3 BUCKLE

STANDARD BUCKLE

1/2” Wide

3/4” Wide

BUCKLE SYSTEMS


Stainless SteelBanding Systems

BANDING

Banding is available in:

1/2” x 100ft Coils

3/4” x 100ft Coils

CHANNEL CLAMPS

1/2” WIDE SCREW BAND BUCKLE STRAPS

16” Lengths

18” Lengths

24” Lengths

36” Lengths

44” Lengths

1/2” WIDE BUCKLE STRAPS

18” Lengths

26” Lengths

36” Lengths

44” Lengths

3/4” WIDE BUCKLE STRAPS

18” Lengths

26” Lengths

36” Lengths

44” Lengths

BANDING SYSTEMS


Stainless SteelClip Sections

BACK TO BACK CLIPS

TWO BOLT CLIPS

TWO BOLTHEAVY DUTY ‘D’ CLIPS

TWO BOLT MINI ‘D’ CLIPS

ONE PIECE CLIPS

SQUARE &RECTANGULAR CLIPS

50mm

60mm

76mm

89mm

114mm

140mm

168mm

194mm

219mm

244mm

50mm

60mm

76mm

89mm

114mm

127mm

50mm

60mm

76mm

89mm

114mm

13mm

16mm

19mm

25mm

50 x 50mm

76 x 76mm

80 x 80mm

100 x 100mm

SIZE Ø


CompleteSmallOffset BracketAssemblies

CompleteLargeOffset BracketAssemblies

AluminiumOffset Brackets

ALUMINIUM OFFSET BRACKETS & TWO PIECE UNI-CLAMP

200mm � � �

225mm � � �

300mm � � �

375mm � � �

450mm � � �

LENGTH PAINTED PAINTED MILL incorporating BLACK GREY FINISH Tee Section (RAL 9005) (BS 381C/693)

200mm � � �

225mm � � �

300mm � � �

375mm � � �

450mm � � �

600mm � � �

750mm � � �

900mm � � �

LENGTH PAINTED PAINTED MILL incorporating BLACK GREY FINISH Tee Section (RAL 9005) (BS 381C/693)

TWO PIECE UNI-CLAMP76mm Diameter


Alochromed& Painted Sheet

Processing facilities areavailable to cut tocustomised finished sizes.

All sizes can be suppliedwith fixing rails attachedusing the blind rivetingsystem.

Sheets are available inother colours and sizeson request.

Grey one side 6’ x 3’ x 11swg 6’ x 4’ x 11swg 8’ x 4’ x 11swg 10’ x 4’ x 11swg 10’ x 5’ x 11swg 2438mm x 600mm x 11swg 3048mm x 600mm x 11swg 2100mm x 1525mm x 11swg 2500mm x 1250mm x 1.5mm 2438mm x 1219mm x 2.5mm Grey two sides 6’ x 3’ x 11swg 8’ x 4’ x 11swg 10’ x 5’ x 11swg Grey back with white front 6’ x 3’ x 11swg 6’ x 4’ x 11swg 8’ x 4’ x 11swg 2100mm x 1525mm x 11swg 2438mm x 1219mm x 2.5mm 10’ x 5’ x 11swg Grey back with black front 8’ x 4’ x 11swg Black one side 6’ x 3’ x 11swg 6’ x 4’ x 11swg 8’ x 4’ x 11swg 10’ x 5’ x 11swg Alochromed only 8’ x 4’ x 11swg (all sizes can be Alochromed) 10’ x 5’ x 11swg 2500mm x 1250mm x 1.5mm White one side 2500mm x 1250mm x 0.7mm 2500mm x 1250mm x 1.0mm 2500mm x 1250mm x 1.5mm 2500mm x 1250mm x 1.8mm 2500mm x 1250mm x 2.0mm 3000mm x 1250mm x 1.5mm 3000mm x 1500mm x 1.5mm 8’ x 4’ x 11swg Silver anodised sheet 2500mm x 1250mm x 1mm 2500mm x 1250mm x 1.5mm 2500mm x 1250mm x 2mm 2500mm x 1250mm x 3mm

FINISH SIZERoad Traffic Signs


Aluminium Circles

AluminiumTriangles

All Aluminium blanks can be supplied with Sign Channels attachedusing a blind rivet system.

TO BS EN 12889/1-2007REGULATIONS

300mm � � � �

450mm � � � �

600mm � � � �

750mm � � � �

900mm � � � �

1200mm � � � �

1500mm � �


PAINTED PAINTED PAINTED PAINTED SIZE GREY BLACK GREY BLACK (BS 381C/693) (RAL 9005) (WITH RAIL ATTACHED) by Bollhoff System

600mm � � � �

750mm � � � �

900mm � � � �

1200mm � � � �

1500mm � �



AluminiumOctagons

600mm � � � �

750mm � � � �




PermanentRoad Traffic Signs

Plastisol CoatedSteel Circles

Plastisol CoatedSteel Triangles

Plastisol CoatedSteel Sheet

Plastisol Coated Steel Circles 300mm

450mm

600mm

750mm

900mm

1200mm

Plastisol Coated Steel Triangles 600mm

750mm

900mm

1200mm

Plastisol Coated Steel Sheet 2440mm x 1200mm x 1.2mm

SHAPE SIZE

All Plastisol Panel sizes can be supplied with Sign Channels attachedusing a blind rivet system.

RESISTANCE TO AGGRESSIVE SUBSTANCES

• ACIDS: very good• ALKALIS: very good• CHLORINE SOLVENTS: good - Aromatic: average - Alcoholic: very good - Aliphatic: good

• MINERAL OILS: Resistance depends on the gas or liquid concentrations, and whether there is permanent contact. In all cases please consult us.

PROPERTIES OF PVC PLASTISOL

TOTAL DRY FILM THICKNESS . . . . . . . . . . . . . . . . . . . . . . .200 microns

COATING FINISH . . . . . . . . . . . . . . . . . . . . . . . . . .Leathergrain emboss

GLOSS LEVEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 - 40%

MAXIMUM AMBIENT TEMPERATURE . . . . . . . . . . . . . . . . . . . . . . .60°C

MINIMUM FORMING TEMPERATURE . . . . . . . . . . . . . . . . . . . . . .+10°C

MINIMUM BENDING RADIUS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .OT

SCRATCH RESISTANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3500g

CORROSION RESISTANCE

1) Salt spray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1000 hours2) Humidity cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1000 hours

REVERSE COAT Although the coat on the reverse side is usually notrequired to have UV resistance, it must still be corrosion resistant andhighly adhesive. On a well cleaned and chemically pre-treated surface,the primer and epoxy coats on the reverse side provide a coating thatfully meets these requirements.


PERFORMANCE

The time period before first maintenance is needed varies from 10 to 17years, depending on the environment, profile, orientation and colour.

INFORMATION

Polyvinyl chloride based thermoplastic resin (PVC Plastisol) particularlysuitable for industrial applications. This coating is available in coil or cut-length form supplied on hot-dipped galvanised substrate.

This products has good corrosion resistance and good handle-ability dueto the thickness of the coating. It has excellent formability characteristicsand is suited for Road Sign manufacture.

Standard colours are Road Traffic Grey and Black.

EMBOSSED PLASTISOL 200�m

Recommended for aggressive atmospheres: urban sites, chemicalindustry, coastal zones.

COATING TECHNICAL PROPERTIES

THICKNESS (THICKNESSES ARE NOMINAL VALUES)

• Embossed Plastisol 200�m - 5�m (primer) + 195�m

• Protection: None or FST film

FLEXIBILITY

• Bending: (up to 1.5mm) OT on galvanised

• Drawability: good

• Shock resistance: excellent

HEAT RESISTANCE

• Maximum continuous temperature: 60°C

• Fire classification: M1

CHEMICAL CHARACTERISTICS

CORROSION RESISTANCE

• Tropical test: 1000 hours• ECCa T8 Salt Spray Test: 1000 hours


GRP Circles

GRP Triangles

GRP Sheet

300mm

450mm

600mm

750mm

900mm

1200mm

1500mm


CIRCLE SIZES (DIAMETER)

600mm

750mm

900mm

1200mm

1500mm


TRIANGLE SIZES (VERTICAL HEIGHT)

8’ x 4’ x 3.2mm (also available in white)

10’ x 5’ x 3.2mm


SHEET SIZE

All GRP Sheet sizes can be supplied with Sign Channels attached usinga blind rivet system.

TABLE 2

NOTE: These self-piercing rivets are supplied with either a silver or black Kalgardfinish and are available from either Bollhoff or Henrob.

RIVET PART NO. R20845CK02 R20845C05

RIVET LENGTH 8mm 8mm

RIVETING THICKNESS 4mm 6mm

SIGN FACE GRP GRP

STIFFENER Aluminium Aluminium

BOLLHOFF / HENROB RIVET RECOMMENDATIONS


SIGN CONSTRUCTIONThe adhererable sign face can be applied to either face of GRP Panels.

STIFFENING AND RIVETINGSupport channels may be secured to the back of the panels by thefollowing methods:

• BOLLHOFF non-penetrating rivet system.• Adhesives using 3M 4980 VHB Tape or 3M Scotchweld DP 460.

SUPPORT RAIL RECOMMENDATIONSGRP Sheet has good tensile strength and impact resistance. The nature ofGRP is that it is more flexible than Aluminium. To obtain the best use andservice life it is recommended that the support rails, which providestiffening, are fixed in accordance with TABLE 1.

TABLE 1

SUPPORT RAILS SHOULD BE FIXED A MINIMUM OF 30MM FROM THE RUNNING EDGE OF

THE SIGN. IF A SHEET JOINING SECTION IS TO BE FITTED BY MEANS OF RIVETING, THEN

THE RIVET SHOULD NOT BE WITHIN 15MM OF THE SHEET EDGE.

GRP Sheet is available in 3.2mm thickness. When fixing aluminiumsupport rails by means of a non-penetrating rivet system, a maximum rivetspacing of 150mm should be adopted.

NOTE: GRP Sheet signs will flex more than Aluminium signs of the samesize until they are mounted on posts, hence it is advisable to storecompleted signs flat or with support rails vertical to prevent possibledamage to the sign facings.

BOLLHOFF / HENROB RIVET RECOMMENDATIONSDue to the different properties of the Aluminium alloy and GRP sign plateused for signs, it is necessary to change rivets for each material thicknessas per TABLE 2 (see page 100).

• DO NOT rivet within 15mm from the edge of the GRP sign plate.• Riveting pressure may need to be adjusted to suit the ductility of the materials being riveted.• Should not be necessary to change Upsetting Die or Nose Assembly.

0.50m 2 400mm

0.75m 3 325mm

0.90m 3 400mm

1.00m 4 300mm

1.20m 4 366mm

1.50m 5 350mm

1.75m 6 380mm

2.00m 7 317mm

2.25m 8 340mm

2.44m 8 335mm

SIGN SECTION HEIGHT NO. OF RAILS MAX. RAIL SPACING


BCPHoarding Panel

BCP TrafficComposite Sheet

APPROVED forPermanent Road Signs

BCP FOR ALL YOUR SIGN MAKING NEEDS...

Due to the excellent hard smooth finish, BCP lends itself extremely wellto sign manufacture. BCP can be digitally or screen printed, have vinyllettering and sheet applied and can also be spray painted. Combinedwith the pre-finished coloured polyester coating, it is truly a remarkableproduct for creating signs that can be shaped and formed, with a unique,hard-wearing finish that exudes quality. A range of colours and finishesare available from our branches throughout the UK.

If you have a requirement for a specific RAL or Pantone colour then pleasecontact your local Blackburns service centre, we also provide a range offinishes from granite and timber effects to metallics in many colours.

2440 x 1220 x 2mm �

2440 x 1220 x 3mm � �

3000 x 1500 x 3mm �

3050 x 1500 x 3mm �

(Aluminium skin thickness 0.21mm)

SIZE WHITE WHITE WHITE MATT BOTH SIDES MATT ONE SIDE MATT / GLOSS

300mm

450mm

600mm

750mm

900mm

1200mm


BCP CIRCLES (DIAMETER) - STANDARD ROAD TRAFFIC SIZES

600mm

750mm

900mm


BCP TRIANGLES (VERTICAL HEIGHT) - STANDARD ROAD TRAFFIC SIZES

� 2000 x 1000 x 3mm 0.5mm

� 8’ x 4’ x 3mm 0.5mm

� 10’ x 5’ x 3mm 0.5mm

Meeting BS EN 12889/1-2007 Regulations

BCP TRAFFIC SIZE SKIN


BCP Temporary

BCPComposite Tray

Stainless SteelSheet Satin Polished 2500 x 1250 x 0.7mm T304

(One Side 240s) 2500 x 1250 x 0.9mm T304

2500 x 1250 x 1.2mm T304

2500 x 1250 x 1.5mm T304

2500 x 1250 x 3.0mm T304

Satin Polished 2500 x 1250 x 0.7mm T316

(One Side 240s) 2500 x 1250 x 0.9mm T316

2500 x 1250 x 1.2mm T316

2500 x 1250 x 1.5mm T316

2500 x 1250 x 3.0mm T316

Mirror Polished 2500 x 1250 x 0.7mm T304

(One Side) 2500 x 1250 x 0.9mm T304

Sheets are available in other gauges and sizes on request

FINISH SIZE TYPE

BCP COMPOSITE TRAY SIGNS MADE TO ORDER...

Blackburns Metals offer an in-house service to manufacture BCP compositepanel into return-edge signs.

Sign channels can also be attached using the blind rivet system.

� 8’ x 4’ x 3mm 0.21mm

� 10’ x 5’ x 3mm 0.21mm


BCP TEMPORARY SIZE SKIN


105

CompositeSign Trays, Posts& Finials


Blackburns have access to the largest and most comprehensive rangeof Signs and Sign Components in the UK. Our strategy is simply toprovide a quality product and responsive delivery at a very competitiveprice. Your customers will not wait for extended lead times and neithershould you.

WE WILL GET YOUR ORDER RIGHT FIRST TIME,DELIVERED ON TIME, EVERY TIME.

Blackburns also offer Composite Sign Trays attached to Aluminiumor Steel Posts in the following sizes and finishes complete with finialsor blanks.

ALUMINIUM POSTS

• 76mm Square Powder Coated (white)

• 76mm Diameter Powder Coated (grey, white or silver anodised)

• 89mm Diameter Powder Coated (white)

STEEL POWDER COATED POSTS

• 76mm Diameter Powder Coated (grey)

• 89mm Diameter Powder Coated (grey)

FINIALS / BLANKS

• 76mm Square Powder Coated (white or mill finish)

• 76mm / 89mm Diameter Powder Coated (grey, white or mill finish)

The Image on the left illustrates the type of sign you will be able tomanufacture with the new Rivnut & Bolt System using the aboveBlackburns products and finishes.

Unrivalled Stock Range inSIGN PRODUCTSOpen your account TODAY...

or pay by credit card

Contact your local Blackburns today

(see back cover for locations and contact details)


Sign Kits

Fret Work &Bespoke Signs

OFFSITE MANUFACTURING SERVICE...

With supply of our unitised sign systems or sign kits, we offer our signtrade customers an off-site manufacturing service to allow them toconcentrate on the added value of sign design and installation.

Produced under quality controlled factory conditions, this robustrange of signs can be sourced incorporating an aluminium compositesign tray, square or round posts with finials available in white andgrey from stock or mill finish for subsequent painting to customerspecification. With complementary accessories and simple assembly,these low maintenance sign kits provide a complete solution whichshould also help reduce delivery lead times to the end customer.

INCREASED CAPACITY AND QUICKER LEAD TIMES...

Blackburns Metals have invested heavily in developing the signmanufacturing element of its business, with the introduction of thenew AXYZ Router to complement our existing machines, this hasenabled Blackburns to increase its capacity, offering quicker leadtimes with the facility to cut specific and bespoke sizes, fret worklettering and shapes to our customers immediate requirements.Manufactured from the full range of sign making materials, such asBCP composite sheet, cast acrylic and polycarbonate.

Sign trays are a large part of the business and we can manufacturemany different sizes, along with cutting a variety of shapes includingTriangles, Circles, Rectangles, Octagons and Hexagons from the fullrange of materials.


Blackburns Sign Tray & Fret Work...Blackburns CNC Router allows the design and manufacture of bespoke compositesign trays and fret work to the customers specification, like those shown in theimages above.

for further info contact your local Blackburns(see back cover for locations and contact details)




BCPComposite Sheet Aluminium features Al-Mn alloy series 1100

Sheet thickness 0.3mm

Panel exterior surface Gloss

Polyester coating 20 microns

Protective plastic film 50 microns

Panel interior surface Matt

Standard sizes 2440 x 1220 x 2mm

3050 x 1500 x 2mm

Not all sizes are listed. 3050 x 1000 x 3mm

Please contact your local 2440 x 1220 x 3mm

Blackburns service centre 3050 x 1500 x 3mm

for more information. 3000 x 2000 x 3mm

4050 x 1500 x 3mm

3050 x 1250 x 4mm

3050 x 1500 x 4mm

4050 x 1500 x 4mm

Standard colours in 3mm

2mm / 4mm thickness

Available in White only

Customer specials require a minimum run of 600m2

NOTE: Colours may vary slightly due to CMYK colour conversion

Bright White Ultramarine BlueRAL 5002

Night BlueRAL 5022

Traffic RedRAL 3020

Traffic GreenRAL 6024

Traffic YellowRAL 1023

BronzeMetallic

SilverRAL 9006

Jet BlackRAL 9005

Light IvoryRAL 1015

Moss GreenRAL 6005

BrushedAluminium

Mirror PolishedSilver

Mirror PolishedGold

BLACKBURNS COMPOSITE PANEL (BCP)


BCP (POLYESTER COATING) SHEET SPECIFICATIONS

PANEL DIMENSIONS

Panel Thickness 2mm / 3mm / 4mm

Aluminium Thickness 0.3mm

BCP Light 0.21mm Skin

Sheet Weight 3.17m2.k / 4.27m2.k / 5.10m2.k

Thickness ±0.1mm

Width -1mm ~ +2mm

Length -1mm ~ +3mm

Diagonal ≤3mm

Thermal Expansion ≤4.00 x 10 -5 / oC

Aluminium Thickness ±0.02mm

Paint Thickness (micron) ≥20

Pencil Hardness ≥HB

Toughness of coating ≤HB

Impact Strength 50kg . cm2, Excellent, without crack

Boiling Water Resistance Boiling for ≥2hrs in 99oC±1 without change

Acid Resistance No Change (Immerse in 2% HCl 24hrs)

Alkali Resistance No Change (Immerse in 2% NaOH 24hrs)

Solvent Resistance No Change (Cleaned x100, with Xylene by 1kgf)

Cleaning Resistance No Change (Immerse in 20# Engine Oil 24hrs)

Peel Strength 180o ≥5.8 N/mm

Temperature Resistance 50 to 90oC

Sound Absorption NRC 0.05

Sound Attenuation Rw db 27 / 28 / 29

Water Absorption % by Vol. 0.01

Thermal Performance Thermal Deforming ≥105oC - ASTM D 648-01

Thermal Resistance 0.033 (m2.k) / W

Thermal Conduction Coefficient 5.31W / m2.k

Core Composition High Pressure LDPE Polyethylene

DIMENSIONAL TOLERANCES

SURFACE PROPERTIES

PRODUCT PROPERTIES (2mm / 3mm / 4mm)


Foamed PVCSheet

IDEAL FOR PRINT AND DISPLAY

Our wide range of free foamed PVC sheets, with smooth matt surface, areparticularly suited to print and display applications, accepting any form ofgraphic overlay including screenprint, digital print direct and vinyl lamination.

Produced using chemical blowing agents to create a fine homogenouscell structure, foamed PVC sheets are half the weight of solid PVC whileremaining flat and rigid, a key requirement for both processing andapplication. Significant chemical resistance and compliant with allinternational fire resistance standards, foamed PVC sheets can be usedsafely in many demanding environments.

EXCEPTIONAL PRINT PERFORMANCE

For effective digital print output, subtractive colour mixing relies onabsorbing some wavelengths of light while reflecting others. For our largeformat digital print customers, printing direct to substrate, our brighterwhite foamed PVC sheet helps deliver a higher level of reflection from thesurface for printed colours that appear more vibrant with sharp, welldefined image definition.

APPLICATIONS

Readily fabricated and formed using conventional tools and equipment, ourfoamed PVC sheets are suitable for a wide range of applications includingsignage, hanging displays, framed panels, wall mounted, printed displaypanels, point of purchase fixtures, wall cladding, partitions and suspendedceilings.

Our foamed PVC sheets also make an ideal core material for structures inthe marine industry due to a combination of features including a highinsulation value, safe fire behaviour to the extent that the product is self-extinguishing and other characteristics, including a high bending stiffness,good strength to weight ratio and the ability to reduce noise, providingan efficient acoustic barrier.

2440 x 1220 x 3mm � � �

3050 x 1560 x 3mm � �

3050 x 1220 x 3mm �

2440 x 1220 x 5mm � �

3050 x 1220 x 5mm �

2440 x 1220 x 10mm �

3050 x 1560 x 10mm �

Other sizes available upon request *LD = LOW DENSITY

FOAMED PVC SHEET WHITE WHITE LD* BLACK



Celuka Sheet WHAT IS CELUKA?

Celuka is primarily a process and as with free foamed PVC, Celukaproduces a sheet that has been expanded with gas to create a cellstructure that helps to deliver a rigid, yet lightweight product.

In the Celuka process the sheet is cooled immediately upon exitingthe die which acts to suppress cell formation at the surface, creatinga hard, high quality finish, while allowing the hot melt to expandinwards. The process is typically preferred for thicker sheets,available from 10mm.

APPLICATIONS

An excellent replacement material for wood based products, Celukasheets have the same screw pull rating as pine yet will never betroubled by rot, mould, swelling, chemical attack or insect infestationand have extremely safe fire performance to BS476/7 Class 1.

Celuka sheets are suitable for use in many different applications, aswith free foamed PVC, including advertising, display structures,cladding, lining and more.

2440 x 1220 x 10mm

3000 x 1220 x 13mm

3050 x 1220 x 19mm


WHITE CELUKA SHEET



BFP - BlackburnsFluted Panel

WHAT IS BLACKBURNS FLUTED PANEL (BFP)?

BFP is the ideal printing medium. Its double-sided corona treatment allowseasy printing, even for digital printing. BFP is resistant to moisture, it is strongand still very light. This makes BFP the perfect substrate for outside and insideapplications. The corona treatment also provides a better adhesion whengluing the sheets to other materials, or when using adhesives.

BFP can be easily cut or die-cut into virtually any shape.

BFP is available in a variety of colours.

BFP is extruded from polypropylene copolymer, it is much more durablethan cardboard and is completely recyclable.

BFP - TECHNICAL DATA

MATERIAL Polypropylene copolymer

COLOURS STANDARD: Black, White, Natural OPTIONAL: Grey, Yellow, Red, Blue, Orange, Green We can match specific colour requirements (subject to minimum order quantity)

THICKNESS 2 – 10 mm

WEIGHT 250 – 2000 g/m2

WIDTHS 300 – 2600 mmLENGTH < 300 g/m2 : 400 – 8000 mm < 650 g/m2 : 300 – 8000 mm > 650 g/m2 : 200 – 8000 mmTOLERANCES Length: -0/+0,5 % Width: ± 3 mm Squareness: ± 0,5%

CORONA TREATMENT 38 dyne lasting, double-sided

RECYCLABILITY 100% recyclable , class 5

BEHAVIOUR Resistant to water, greases and oils Good resistance to mineral and organic acids and solventsOPTIONAL FEATURES UV Treated Anti-static Flame Retardant Micro-perforated

2440 x 1220 x 4mm

2440 x 1220 x 5mm

2440 x 1220 x 6mm

2440 x 1220 x 10mm

3050 x 1500 x 5mm

3050 x 1500 x 10mm


BFP WHITE FLUTED PANEL



BFP - BlackburnsFluted Panel

BFP - TECHNICAL DATA

PP* = TEST RESULTS BASED UPON RAW MATERIALTemporary and limited list made to our best knowledge at this time.The technical data concerning products is not binding and is given for guidance only.For further information please contact your nearest Blackburns service centre.(see back cover for locations and contact details...)

THERMAL PROPERTIESPROPERTIES METHOD UNITS PP*

Coefficient of linear expansion ASTM D696 mm/moC 0.18Specific Heat DSC J/goC 1.68Heat Deflection Temp. (0.46 MPa) ISO 75 oC 78Heat Deflection Temp. (1.82 MPa) ISO 75 oC 52Vicat Softening Point (1 kg) (10N) ISO 306 oC 148Vicat Softening Point (5 kg) (50N) ISO 306 oC 78

MECHANICAL PROPERTIESPROPERTIES METHOD UNITS BFP

Compression Strength 2.1mm/350g Internal IPB N/cm2 min. 37at maximum 2mm/400g Internal IPB N/cm2 min. 41

3mm/400g Internal IPB N/cm2 min. 303mm/650g Internal IPB N/cm2 min. 804.5mm/1000g Internal IPB N/cm2 min. 144

OPTICAL PROPERTIESPROPERTIES METHOD UNITS BFP

Light Transmission 2mm/400g Internal IPB % 58(Clear Sheet) 2.5mm/450g Internal IPB % 53

3mm/500g Internal IPB % 514mm/1000g Internal IPB % 37

ELECTRICAL PROPERTIESPROPERTIES METHOD UNITS PP*

Surface Resistivity ASTM D257 Ω ca.1013

Dielectric Constant (at 1MHz) ASTM D150 - 2.25Dissipation Factor (tg ∂ at 1MHz) ASTM D150 - < 5x10-4

Dielectric Strength (500V/sec) ASTM D149 kV/mm 70

MECHANICAL PROPERTIESPROPERTIES METHOD UNITS PP*

Tensile Strength (50 mm/min) ISO 527 MPa 38Elongation at break (50 mm/min) ISO 527 % 800Flexural Modulus ISO 178 MPa 1250Impact Strength Izod (23o) ISO 180 kJ/m2 80Shore D Hardness ISO 868 - 66

PHYSICAL PROPERTIESPROPERTIES METHOD UNITS PP*

Specific Gravity PP ISO 1183 g/cm3 0.907Water Absorption ISO 62 % 0.02


BFP - PRINTING

BFP sheets are preferably printed by means of screenprinting.

To assure a good adhesion of the inks, Corona treatment of the sheets is obliged.

For screenprinting it is recommended to use solvent-based or UV inks.

Water-based inks are giving poorer results.

ADVISED SCREENS

The finer the mesh of the screen, the finer the print. The rougher the screen,the thicker the print layer will be.

Printing with solvent-based inks, screens with 120 lines/inch are recommended.

For thicker prints, rougher screens should be used.

Printing with UV-based inks, screens with 150-180 lines/inch are recommended.

If rougher screens are used with UV inks, the ink would not dry fast enough.

DRYING OF SOLVENT-BASED INKS

The drying of the ink can be realised in dry-racks in a drying oven (furnace).The drying time and temperature is dependant on the sheet thickness, thethickness of the printed layer and the type of drying oven. Proper tests priorto production are recommended.

DRYING OF UV-BASED INKS

UV-based inks are dried by UV-radiation. The drying happens in a split second.The speed of exposure to this UV-radiation source is dependant on theintensity of the UV-radiation, thickness of the printed layer, colour of print, etc.

Whilst using solvent-based inks, it is advised to keep in mind that the ink candry after a while into the screen when not operating. Printing with UV-inksdoesn't have this risk, since inks are drying only under UV-radiation.

There are a lot of ink-suppliers who offer inks suitable for printing onpolypropylene sheets. The best ink will be different for every printer, soproper testing is advised.

WE CAN RECOMMEND THE FOLLOWING INKS

SOLVENT-BASED INK SUPPLIERS:

• POLYPRO TPP

• MASTERFLEX RA

• UNIVERSAL SE

UV-BASED INK SUPPLIERS:

• PLASTOLUV

• UV EXCURE

The printing information

provided on this page is

based on current knowledge

and experience. The data

does not imply any warranty

from Blackburns Metals or

the manufacturer towards

third parties. Users should

consider this data as

a guideline and gather

additional information, to

make independent decisions

regarding the proper use,

disposal, safety towards other

parties and the protection of

the environment.

For further informationplease contact yournearest Blackburnsservice centre or [email protected]



Cast Acrylic Sheet Cast acrylic sheet is available from stock in 3mm to 25mm thicknessand are also available to order in block, up to 50mm thick.

Produced by cell casting between glass plates, cast acrylic sheettransmits 93% of visible light, offering a clarity that is superior to allother thermoplastic sheet materials and glass with the advantage ofbeing half the weight with five times the impact strength. The perfectmaterial for designers looking to create a visual impact, cast acrylicsheet can also have the edges polished to the same clarity as thesurface of the sheet.

The UV stability of cast acrylic means the material offers extremeweather resistance in all environments and is offered with a 10 yearwarranty assuring you of its long-term dependability and performance.

DIVERSE RANGE

Available in a green tint to provide the appearance of glass, a range ofneutral tints, primarily for glazing applications, black and a wide rangeof transparent, translucent and opaque colours, all produced from purecolour pigments, cast acrylic sheets can be colour-matched to asample, Pantone or RAL reference in order to meet specific customerrequirements or corporate identity.

Other surface and edge effects can also be supplied including edge-litlighting products for LED, fluorescent products in an exciting range ofcolours and frost sheets.

CAST ACRYLIC OPALS FOR BACK-LIT LIGHTING EFFECTS

Our range of cast acrylic opals, available in all industry standard tintsand light transmissions are optimised for back-lit lighting applicationswhilst also providing a clean, bright appearance during daylight hourswhen the product is not illuminated.

APPLICATIONS

With a hard, high gloss surface and exceptional mechanical propertiescombined with a wide range of colours and finishes, cast acrylic sheetoffers the user utility as well as decoration. Readily fabricated andformed using conventional tools and equipment, cast acrylic sheets arethe ideal thermoplastic sheet material for signage and point of saleamongst many other applications.



PolycarbonateSheet Our flat polycarbonate sheets, available from stock in 2mm to 12mm

thicknesses are also available to order in 1mm and 15mm for specialistrequirements with the former in sheet or coil format.

Polycarbonate is the ideal safety glazing material where clarity,impact resistance and fire performance are critical requirements.

EXCEPTIONAL PERFORMANCE

UV stable, polycarbonate sheet is manufactured with an integral,co-extruded UV layer on both sides of the sheet so that it cannot beinstalled in the wrong way. Delivering extreme weather resistance inall environments, the sheet is offered with a 10 year warranty toassure the user of its dependability and performance.

Able to absorb high levels of energy, with an impact resistance 200times that of glass, at half the weight, polycarbonate sheet alsodisplays safe fire behaviour, making the product ideal for use bothindoors and out, including commercial buildings subject to moredemanding regulation or where there is a high risk of potentialdamage.

APPLICATIONS

Readily fabricated and formed using conventional tools andequipment, our polycarbonate sheets are also ideal for cold linebending or thermoforming into complex shapes at deep drawratios.

Firmly established as a principal material for the built environment,polycarbonate is suitable for a wide range of applications includingrooflights, recognised as being more efficient than windows forgetting natural daylight into a building, barrel vault roofing,canopies and shelters, machine guards and signage using clear andopal polycarbonate sheet for light box installations.

OTHER PRODUCTS

For applications exposed to airborne dust and dirt, our polycarbonateis also available with a hard, abrasion resistant coating which furtherincreases the weatherability and chemical resistance of the sheet.



Steel Color® Blackburns Metals are proud to be the sole UK distributor of SteelColor® - Italy's leading stainless steel specialists. With advancedtechnology and unique design and polishing techniques, Blackburnscan provide its customers with stainless steel patterns, finishes andcustom creations.

Enabling stainless steel to be offered in a vast range, Steel Color®

sheets feature brilliant colours including silver, satinising finishes,embossed patterns and etched textures combining to create aproduct with options limited only by imagination.

EXCEPTIONAL PERFORMANCE

Not only has Steel Color®, electro-coloured stainless steel, outstandingaesthetic quality, but it also maintains the essential characteristics ofthe stainless steel material, being equally resistant to corrosion andwith the ability to be worked by many processes.

A performance material with different grades formulated for differentapplications, stainless steel is well known to guarantee permanence,provide hygienic qualities and have outstanding durability, whilesatisfying all mechanical and thermal requirements.

Steel Color® delivers decoration as well as utility and with a colouringprocess that does not involve pigments it can be used for externalapplications without being susceptible to UV degradation.

APPLICATIONS

Steel Color® has a variety of applications and is ideal for use in theconstruction industry, in particular façades, the global lift industryand architectural interior applications for urban design.

OTHER PRODUCTS

Although stainless steel is the main focus of our product range,brass, bronze, copper and aluminium can also be crafted with equalcare and precision on a made-to-order basis.

For further information on the full range of colours and sizesavailable please contact your local Blackburns service centre...

Request yourSteel Color®

brochure today!

120+ COLOURS &FINISHES AVAILABLE

Contact your local Blackburns



Request yourSteel Color®

brochure today!

120+ COLOURS &FINISHES AVAILABLE


127Ask about STEEL COLOR®... [email protected]

Mirror Sheet Blackburns mirror sheet is available in almost all product variantsincluding our thermoplastic range, Blackburns aluminium composite(BCP), acrylic and polycarbonate as well as stainless steel and the SteelColor® range (see page 124). Please note BCP mirror sheet is onlyavailable in silver and gold finishes suitable for interior applications.

The thermoplastic range is typically supplied as silver mirror in 3mmthickness, with acrylic and polycarbonate products also available upto 6mm thick, in gold and other colours as required.

With the advantage of being half the weight of plate glass mirror andshatter resistant, thermoplastic mirror sheets offer all the benefits ofmirror without the potential risk of breakages.

Stainless steel mirror sheet is available in all grades and thicknessesfrom 0.8mm to 3mm. The Steel Color® Super Mirror has a flawless,polished surface to deliver true mirror reflectivity (Steel Color® brochureavailable on request).

APPLICATIONS

Thermoplastic mirror is suitable for different environments wherethere is a high risk of potential damage or when the product is tobe worked into a fabricated display or signage installation.

Steel Color® mirror is an equally versatile product suitable for adiverse range of applications where the use of plate glass mirrorwould typically be restricted due to the potential risk of breakages.Used in food preparation areas and commonly seen in passengerlifts, different Steel Color® mirror finishes also have a number ofprecedents as a façade for contemporary buildings.

For further information on the full range of colours and sizesavailable please contact your local Blackburns service centre...

Contact your local Blackburns today





SEEPAGE174

131

Five Bar Treadplate Stucco

Propeller

Five Bar Treadplate 2500mm x 1250mm x 1.5mm 13.3 kg

2000mm x 1000mm x 2mm 11.3 kg

2500mm x 1250mm x 2mm 18.7 kg

3000mm x 1500mm x 2mm 26.8 kg

2000mm x 1000mm x 3mm 17.3 kg

2500mm x 1250mm x 3mm 27.0 kg

3000mm x 1500mm x 3mm 38.9 kg

2000mm x 1000mm x 4.5mm 25.0 kg

2500mm x 1250mm x 4.5mm 39.1 kg

3000mm x 1500mm x 4.5mm 56.3 kg

2000mm x 1000mm x 6mm 34.0 kg

2500mm x 1250mm x 6mm 51.7 kg

3000mm x 1500mm x 6mm 74.3 kg

2500mm x 1250mm x 9.5mm 84.3 kg

Stucco 2000mm x 1000mm x 0.5mm 2.74 kg

2500mm x 1250mm x 0.5mm 4.28 kg

2000mm x 1000mm x 0.6mm 3.28 kg

2500mm x 1250mm x 0.6mm 5.14 kg

2000mm x 1000mm x 0.7mm 3.84 kg

2500mm x 1250mm x 0.7mm 5.99 kg

2000mm x 1000mm x 0.8mm 4.38 kg

2500mm x 1250mm x 0.8mm 6.84 kg

2500mm x 1250mm x 1.0mm 8.50 kg

2500mm x 1250mm x 2.0mm 10.0 kg

Propeller * 2500mm x 1250mm x 1.5mm 14.0 kg

2500mm x 1250mm x 2.0mm 18.0 kg

2500mm x 1250mm x 3.0mm 28.0 kg

* Propeller pattern also available up to 6mm thick Contact your local Blackburns for further information (see back cover for contact details)

SHEET FINISH SIZE WEIGHT

PROVIDINGDRAMATIC, DECORATIVESURFACE DESIGN...

For use in interior andexterior flooring andcladding, providingdramatic decorativesurface design.

All our Patterned Sheetsare available in variousfinishes and colours,including bright polishedfinishes and an anodisedcolour range available insmall batches. The onlylimitation to the colourand finish is thedesigners imagination.

Patterned Sheet isavailable in a wide rangeof sheet sizes andthicknesses to suit yourapplication, we can supplybespoke panel sizes andfabricate to yourrequirements.

Please contact your localBlackburns service centrefor further information.

Patterned Sheet



RAL Colour GuidePLEASE NOTE:

This guide is for illustrationpurposes only. Colours willvary slightly due to CMYK

printing ink conversion.

RAL 1001 RAL 1002 RAL 1003 RAL 1006

RAL 1007 RAL 1012 RAL 1013 RAL 1014

RAL 1015 RAL 1016 RAL 1018 RAL 1019

RAL 1021 RAL 1023 RAL 2000 RAL 2001

RAL 2002 RAL 2009 RAL 3000 RAL 3001

RAL 3002 RAL 3003 RAL 3004 RAL 3005

RAL 3007 RAL 3009 RAL 3011 RAL 3012

RAL 3015 RAL 3020 RAL 3027 RAL 4004

RAL 4005 RAL 5000 RAL 5002 RAL 5003

RAL 5004 RAL 5005 RAL 5007 RAL 5008

RAL 5009 RAL 5010 RAL 5011 RAL 5012

RAL 5013 RAL 5014 RAL 5015 RAL 5017

133

Can’t find thecorrect colour?

If you require a differentRAL colour, or colourswatch please contactyour local Blackburnsservice centre.


RAL 5018 RAL 5019 RAL 5021 RAL 5022

RAL 5024 RAL 6000 RAL 6001 RAL 6002

RAL 6003 RAL 6004 RAL 6005 RAL 6006

RAL 6007 RAL 6009 RAL 6010 RAL 6011

RAL 6012 RAL 6016 RAL 6017 RAL 6018

RAL 6019 RAL 6020 RAL 6021 RAL 6024

RAL 6025 RAL 6026 RAL 6027 RAL 6028

RAL 6029 RAL 6032 RAL 7000 RAL 7001

RAL 7004 RAL 7005 RAL 7006 RAL 7010

RAL 7011 RAL 7012 RAL 7015 RAL 7016

RAL 7021 RAL 7022 RAL 7024 RAL 7026

RAL 7030 RAL 7031 RAL 7032 RAL 7033



RAL Colour Guide(continued...)

PLEASE NOTE:This guide is for illustrationpurposes only. Colours willvary slightly due to CMYK

printing ink conversion.

Can’t find thecorrect colour?

If you require a differentRAL colour, or colourswatch please contactyour local Blackburnsservice centre.


RAL 7035 RAL 7037 RAL 7038 RAL 7039

RAL 7040 RAL 7042 RAL 7043 RAL 7044

RAL 8003 RAL 8004 RAL 8007 RAL 8011

RAL 8012 RAL 8014 RAL 8015 RAL 8016

RAL 8017 RAL 8019 RAL 8024 RAL 8040

RAL 8070 RAL 8080 RAL 9001 RAL 9002

RAL 9003 RAL 9004 RAL 9005 RAL 9010

RAL 9011 RAL 9016 RAL 9018 CALL BLACKBURNS...

NEED ANOTHERCOLOUR?


Contact Blackburns today...(see back cover for locations and contact details)

SEEPAGE96

Blackburns extensive range of traffic signs and components are availablein a variety of colours and finishes. Our nationwide network of servicecentres will deliver direct to your door... from raw materials to semi-fabricated products. Please contact your local Blackburns to discuss yourrequirements or email [email protected]

PRODUCT CATALOGUE

Contact your local Blackburns service centre or visit www.blackburnsmetals.com

BEDFORDEdison Road

Elms Farm Industrial EstateBedford MK41 0HUt . 01234 684 100

[email protected]

BRIDGENDCoegnant Close

Brackla Ind. Estate, BridgendMid Glamorgan CF31 2AH

t . 01656 683 [email protected]

BRISTOLSt. Andrews Trading EstateThird Way, Avonmouth

Bristol BS11 9YEt . 0117 948 2600

[email protected]

EDENBRIDGECommerce Way

EdenbridgeKent TN8 6ED


GATESHEADUnit 16c, Follingsby Park

GatesheadTyne & Wear NE10 8YGt . 0191 338 7000

[email protected]

HAYDOCKUnit 6, Wilcock Road

Old Boston Trading EstateHaydock, St. Helens WA11 9SR


KINGSWINFORDBuilding 31, Second Avenue

The Pensnett EstateKingswinford DY6 7UEt . 01384 282 630

[email protected]

LEEDSUnits 3 & 4Benyon Park

Leeds LS12 6DPt . 0113 386 3280

[email protected]

NORWICHUnit C,The Frenbury Estate

Hellesdon Park RoadNorwich NR6 5DPt . 01603 243 900

[email protected]

PLYMOUTHUnit K1, Eagle Road

Langage Business ParkPlymouth, Devon PL7 5JYt . 01752 612 400

[email protected]

READINGUnit 3b, Transigo

Gables Way, ThatchamBerkshire RG19 4ZAt . 0118 945 5542

[email protected]

COIL CENTREBuilding 43, Third Avenue

The Pensnett EstateKingswinford DY6 7UUt . 01384 282 350

[email protected]

BLACKBURNS SPECIAL PRODUCTSBuilding 38, Second Avenue, The Pensnett Estate, Kingswinford DY6 7UN t . 01384 276 419 [email protected]

PRODUCT C

ATALOGUE

BLACKBURNS M

ETALS L

IMIT

ED

BML 0316

Documents

BLACKBURNS METALS - SIGN & DISPLAY