Upload
ghufran-saeed
View
12
Download
0
Embed Size (px)
Citation preview
West Coast
Tel 541.385.8700
Fax 541.385.8701
63043 Lower Meadow Drive, Suite 130
Bend, OR 97701
East Coast
Tel 305.947.9974
Fax 305.947.9975
15191 NE 21st Avenue
North Miami Beach, FL 33162
web: www.biolime.com
email: [email protected]
High performancecoating productsmade by nature.
bioLime coatings deliver excellent results for structures of all kinds.
Meet today’s demanding building concerns with over 105 years of proven performance.
This unique system actively promotes healthy, high-performance structural integrity that is measured over centuries, all at a cost that is less than or equal to that of competing coating materials.
The distinctive, natural beauty of bioLime coatings are without equal.
www.biolime.com
Truly green coatingsthat save you green.
3
bioStucco (S)Scratch coat stucco based on natural hydraulic lime. bioStucco (S) can be applied directly over mineral-based substrates without any bonding agents, lath and/or vapor barriers.
bioStucco (B)Brown coat stucco based on natural hydraulic lime. bioStucco (B) is a very durable product which offers high-bonding characteristics that can be applied directly over numerous types of substrates (mineral or otherwise) without any bonding agents or lath.
bioStucco (F) Finish coat stucco based on natural hydraulic lime. bioFinish completes the bioLime coating system with a high performance, durable finish that offers earthen beauty in a range of different color choices.
bioPrimerBase and/or primer coat plaster based on ultra-high calcium, 2 year aged lime putty. bioPrimer is a high-bonding material that can be utilized on numerous types of substrates in preparation for further finish products.
bioPlasterFinish coat plaster based on ultra-high calcium, 2 year aged lime putty. bioPlaster offers excellent bonding strength and creates durable, beautiful, skin-soft results that can only be achieved with purely natural, aged lime putty.
bioMarmoFinish coat plaster based on ultra-high calcium, 3 year aged lime putty. Due to its special formulation, bioMarmo is a true venetian plaster that offers high-sheen, mirror-reflective finishes that is the pinnacle of interior elegance.
bioPitturaFinish coat paint based on ultra-high calcium, 2 year aged lime putty. bioPittura is a high performance paint product that provides rich, earthen color with soft, natural beauty.
bioTintaFinish coat paint based on ultra-high calcium, 4 year aged lime putty. Often referred to as a "color wash", bioTinta's subtle character provides stunning luminescence that is witnessed through the depth of its finish.
www.biolime.com
The bioLime Product Line
bioLime Stucco Products
bioLime Plaster and Paint Products
bioLime coating products are geared for today's new build and renovation applications that require high performance, energy-efficient, durable, long-lasting beauty.
bioLime performs extremely well with all mineral-based substrates including MgO board, AAC, and CMU's of all types. Additionally, bioLime coatings function cohesively with wood, straw bale, and in many other natural build applications.
4
bioThermacoatThermal insulating plaster based on natural hydraulic lime. bioThermacoat is a lightweight insulation material for wall systems which combines excellent thermal dynamic properties while affording high vapor transmission to create a natural, breathable wall coating system.
bioThermacoat promotes a high energy efficient wall envelope while being able to hinder bacterial growth and contribute significantly to the overall preservation of a comfortable, healthy indoor environment.
bioLime Thermal Protection Products
bioLimeFloorFlooring system based on natural hydraulic lime. bioLimeFloor is a natural hydraulic lime mortar flooring system that is applied to existing foundations for the formation of natural and breathable floor surfaces for finishing with - a naturally pigmented bioLimeFloor top coat, bricks, ceramics, stone, stone slabs, wood, etc. bioLimeFloor is free of cement and artifical additives.
bioLimeFloor promtes a healthy living environment because it is not electrically unstable, unlike portland cement. (Portland cement has been proven to cause fatigue and serious health problems for people who stand or work near concrete over prolonged periods of time). bioLimeFloor is completely non-conductive of electricity. For example, it will not drain the charge from a car battery if it is left overnight, unlike Portland cements that will drain batteries overnight. (Please visit www.biolime.com for further information.)
bioMasticNatural glue for ceramic tiles, stoneware, earthenware, natural stone (marble, granite), etc. bioMastic is a natural clear adhesive offering high strength, high adhesion, excellent workability, breathability and durability even under drastic humid or extreme temperature conditions.
Hot, humid climates Cold climates
bioThermacoat cool, dry air with bioThermacoat without bioThermacoat
Benefits:
All natural
Free of cement and additives
Promtotes a healthy environment
Free of Portland cements (known to cause serious health issues)
bioLime Flooring Products
www.biolime.com
5
Tile, stone, mosaic, etc.
existing foundation bioLimeFloor (thermal layer) bioLimeFloor (topcoat)
bioMastic
bioLime vs. Other Coatings
In comparison to other coating materials - bioLimeOUTPERFORMS in ALL areas, including COST!
bioLime
Cement-based
Natural Clay
Acrylic-based
Elasto
meric
Gypsum/Imperia
l
Have You CoveredAll Of Your Coating Concerns?
Material Performance
Fire resistance
Water resistance
Bacteria resistance
Mold resistance
Insect resistance
Thermal performance
Energy efficiency
Salt tolerance
UV reflectance
Indoor temperature stability
Highest water vapor release
Adhesion to substrate
Extreme weather stability
Weathering protection
Durable
Substrate preservation
Autogenous (self) healing
No off-gassing
Clean, healthy indoor air
Fights for sterility
Suitability in allergenic environments
Longevity
Ecological
Feeling of comfort
Overall Performance
excellent good fair poor
short term
www.biolime.com
6
Lime Science
BreathablebioLime coatings are characterized by a micro structure of open porosity. For this reason, the free-moving calcium crystalline deposits ensure a breathable, hygrometric environment, where the high level of calcium crystals function actively for excellent vapor transmission and as a natural disinfectant.
Thermally DynamicbioLime coatings are a proper PCM (phase change material) which offers excellent latent heat vaporization for building envelopes of all types.
An example of this is a structure such as The Pantheon in Rome, where the indoor environment feels cooler in the summer, and warmer in the winter.
bioLime is based on this criteria, and offers these benefits for buildings, large or small.
ElasticbioLime coatings are a pliable material and are able to autogenously heal themselves from microfractures in the case of structural settle-ment issues, seasonal weather changes, and extreme weather environments.
Microscopic Comparison
bioLime Is...
Electron microscope images of the structural composition of bioLime vs. cement:
bioLime shows a highly porous, crystal calcium matrix, a characteristic that facilitates the ability
of a free-moving, highly breathable material.
Cement displays a chemically-locked, nonporous, non breathable matrix that is exposed to high
levels of structural stress.
www.biolime.com
7
bioLime® Cement
bioLime is a company representing over five generations of knowl-edge in the production of high-performance structural coatings.
bioLime coatings are a range of interior and exterior stucco, plaster and paint products which are made of a proprietary blend of calcined limestone and natural ingredients.
This unique system of coatings penetrate deeply by chemical reaction, creating a calcium-rich, micro-porous bonding element that functions as a natural biocide.
Through time, bioLime products actively protect to keep buildings and its occupants healthy.
With more than 105 years of proven performance, the distinctive, natural beauty of bioLime coatings are without equal.
Introduction to bioLime
Proven CredibilityThe bioLime team carries its knowledge of lime coating production over 105 years.
We live lime, we know lime.
Cohesive BondbioLime coatings are formulated to create a chemical bond that penetrates deeply into the substrate. Through time, they become at unison with the substrate it is applied to through natural, chemi-cal reaction.
Durable Through TimebioLime has proven its durability as a strong coating. It will not easily scratch, dust or rub off. At the same time it has excellent flexural strength in new construction settlement, and is highly stable in extreme climates.
www.biolime.com
8
Fire ProtectionbioLime products will not fail during a fire, and will increase the fire rating of the overall wall system. Completely free of voc’s (0.0), bioLime coatings will not burn, smoke or produce toxic gasses under high heat.
Bacteria Elimination bioLime breaks down bacteria, eliminating the potential development of mold, mildew and fungal growth inside a substrate or wall cavity.
Insect ResistantDue to its elevated pH level, insects are non-existent in a bioLime environment.
Energy EfficiencybioLime coatings offer thermal comfort and protection, as well as being able to decrease energy demands from electronic climate control systems. bioLime coatings save energy.
Naturally VersatilebioLime coatings are compatible with all types of masonry units and mineral-based substrates, including wood, straw and other natural build applications.
ColorsbioLime offers a range of natural colorants that are directly from the earth without manipulative processing. Further, custom color matching is available for many different earthen tones to client’s specification.
Clean, Healthy AirA bioLime coated structure feels noticeably different. Its natural composition leaves environments feeling pure, earthen and invitingly comfortable.
www.biolime.com
9
Why choose bioLime?
Engineered to eradicate the most complicated problems facing building professionals today, bioLime coatings are truly unique.
Water, mold, mildew, toxins, insect infestation and excessive energy demands are the evidence of unproven materials over the duration of time.
bioLime coatings are the result of more than 105 years of fine-tuned, formulated, proven performance.
How much does bioLime cost?
At purchase, bioLime is a very competitively priced material, and its value increases even more through time.
bioLime rids the worry of structural damages caused by water intrusion, bacterial growth, mold and mildew attack, salt attack, insect infestation, UV swelling and peeling, toxic off-gassing, and numer-ous other issues caused by artificial and/or syntheti-cally produced coatings.
These issues alone jeopardize the integrity of a structure, creating excessive damages and costs.
bioLime is by far the more cost-effective option.
Feel free to contact us to learn more about pricing and how bioLime can offer you both savings, and increased benefits.
How good is bioLime’s adhesion to different substrates?
Excellent.
bioLime is one of the most versatile products in new construction today.
It is used on numerous types of mineral-based substrates such as cement board, concrete block, AAC, MgO board, gypsum board, plywood, etc.
bioLime coatings can also be used on straw bale, cob, rammed earth and other natural build applications.
Has bioLime been performance tested?
Yes.
bioLime has been a tried and tested material for over a century, and has a solid, proven track record as a high performance, durable, long-lasting product.
We are excited about working with up and coming substrates in the greenbuild sector.
Please consult with us for further details.
Is bioLime stable in extreme climate conditions?
Yes.
bioLime products function cohesively during freeze and thaw cycles, high heat, high humidity and dry climates.
Historical evidence shows that bioLime products perform better under such conditions, as they actively penetrate further into the substrate by natural, chemical reaction.
Frequently Asked Questions
www.biolime.com
10
Is bioLime easy to apply?
Yes.
Although classified as a professional product, bioLime is a very intuitive material. It works with the applicator, never against.
As bioLime develops its certified application base, its purpose is to give specifiers confidence of properly completed projects, as well as giving applicators economical advantages in their respective territories.
Is bioLime safe for applicators?
Yes.
bioLime products are completely free of any toxins, and are 0.0 voc-free.
bioLime is beyond green.
bioLime for LEED?
Yes.
Using bioLime products for LEED applications will afford up to 8-12 points.
Please visit www.biolime.com/greenbuild for further criteria.
Is bioLime waterproof?
Yes.
bioLime coatings function "sacrificially" in flooding and wind-driven rain situations.
An example scenario:
After a potential hurricane or flood catastrophe, bioLime coatings will resist water inundation (provided the wall system is designed to function the same).
During water recession of flood waters, bioLime coatings will act to promote dry, clean air over the entire structure. Further, bioLime coatings will function as a natural disinfectant, eliminating the potential of waterborne and airborne bacterias.
bioLime coatings are designed to perform under wind-driven rain and flooding conditions.
Is bioLime resistant to bacteria, mold and mildews?
Yes.
bioLime coatings are formulated to breakdown airborne and waterborne bacterias, and will consis-tently fight to preserve the entire wall envelope.
What types and sizes of bioLime products are available?
bioLime products come in dry bags, as well as wet-form in buckets.
Its Natural Hydraulic Lime product line (“bioStucco”) comes in 30kg (65lbs) dry bags.
Its Lime putty products come in sizes from 15kg - 25kg (3.5gals to 5gals) buckets.
www.biolime.com
11
Interior and Exterior Coatings
www.biolime.com
bioPlaster(or bioStucco (F), bioMarmo,
bioPittura, bioTinta)
bioPrimer
bioStucco (B)
bioStucco (F)
bioStucco (B)
bioStucco (S)
bioLime's versatile products for exterior and interior applications allows you to finish with either bioStucco (F), bioPlaster, bioPittura, bioTinta or bioMarmo. The choice is yours.
Use the above guidelines as a starting point, or call us to get a recommendation on which product combination will work best for your project.
12
EnvironOxide - BR-834
Cyprus Burnt Umber B - TR/0271
American Natural Red - P400-NR
American Natural Red - PT-NR
Havana Ocher - TR/0275
Dark Ocher - TR/0276
Key Biscayne - BG/0500
www.biolime.com
Bahamia Blue - BB/0200
Greenish Raw Umber - TR/0281
Cyprus Raw Umber - TR/0266
Cyprus Burnt Umber - TR/0261
Cyprus Raw Umber Fl. - TR/0273
Cyprus Burnt Umber Warm - TR/0272
Cassel Brown Earth - TR/0260
Vine Black - TR/O321
Sardinia Red - TR/0270
Burnt Sienna - TR/0262
Raw Sienna - TR/0263
Herculaneum Red - TR/0316 Yellow Earth - TR/0269
Lemon Ocher - TR/0324
Green Earth - TR/0264
Nicosia Green Earth - TR/0282
Virgin Olive - BG/0700
bioLime’s Raw Earth Colors
bioLime offers custom color matching.
Natural earth pigments and iron oxides provide dependable, everlast-ing beauty throughout time.
The luminescence and vividness of these colorants accent bioLime’s coatings in a way that is simply unmatched by modern-made synthetic pigments.
bioLime uses purely natural, non-toxic earth-based pigments to create the colors of all of its finishing products.
bioLime colorants are unaffected by UV light.
bioLime pigments will not lose original color strength, fade, peel, chip or crack.
13
bioStucco - venetian red
bioStucco
bioLimeFloor natural pigmented floor
bioStucco - canyonlands
bioStucco - sardinia red
bioLime Gallery
www.biolime.com
14
The High Performance Beauty of bioLime Coatings
www.biolime.com
bacteria resistant
mold resistant
water resistant
durable
highly vapor permeable
energy efficient
extreme weather stability
fights for sterility
UV reflectant
no cracking, peeling
all natural
no acrylics, synthetics
no control joints required
no necessary lathing
09 25 23: Lime Plastering
09 91 13: Exterior Painting
09 91 23: Interior Painting
09 96 13: Abrasion-Resistant Coatings
09 96 14: Mold-Resistant Coatings
09 96 26: Marine Coatings
09 96 33: High-Temperature Resistant Coatings
09 96 34: Low-Emissivity Paint
09 96 35: Chemical-Resistant Coatings
09 96 43: Fire-Resistant Coatings
09 96 66: Aggregate Wall Coatings
MasterFormat Divisions
15
bioStucco “S”
bioStucco “F”
bioStucco “B”
bioPrimer
bioMarmo
bioTinta
bioPlaster
bioPittura
MasterFormat Divisions
When you have knowledge of the past,you have solutions for the future.
Passaggio di CommodoColosseum, Rome
Material used:B FLUID/XA
certified natural hydrauliclime binder for formulating
mortars on site
West Coast
Tel 541.385.8700
Fax 541.385.8701
63043 Lower Meadow Drive, Suite 130
Bend, OR 97701
East Coast
Tel 305.947.9974
Fax 305.947.9975
15191 NE 21st Avenue
North Miami Beach, FL 33162
web: www.biolime.com
email: [email protected]