Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
PRODUCT GUIDE 2018www.reeltech.co.kr
CCTV LIGHTING FIXTURE SMOKE DETECTOR CHANDELIERPLUG SOCKET AIR CONDITIONER GRILLBANNER
Highbay typePFI-100 / PFI-200 / PFI-300 / PFI-500PSI-20 / PSI-30 PDI-35 / PDI-50
HDI-25HSI-18CDI-15CSI-12
Lighting Lifter
Multi Contacts Lifter
Link Type Lifter Smoke Detector Lifter
MSI-5 MDI-9
CSI-12M CDI-15M HSI-18M HDI-25M PSI-20M/PSI-30M PDI-35M/PDI-50M
LSI-10C LSI-10L FSI-2 FSI-1LSI-7C
Product range
Batten Lifter
LED
Applied to all model FAN Lifter Multi Batten
RT-LED200 CSI-7L CSI-LN200 Flowerpot Lifter
Banner & Partition Lifter
Banner Lifter
RT-LEDN200
Motion Sensor Wireless PanelRCU
RCU & SENSOR & WCP
Flowerpot Lifter
Downlight Lifter
Downlight Lifter
Grill Lifter
Grill Lifter
CCTV Lifter
MSI-5C HSI-15C
Total maintenance solutions for high ceiling installed equipment
such as luminaries, lighting systems, CCTVs, smoke detectors, plug sockets, display banners and more.
No danger!
No risk of work in high placesand prevent the accident couldhappen during maintenance.
No equipment!
No need of rent the liftingequipment to maintenance.
No electric shock!
No electric current duringmaintenance and no risk ofelectric shock.
Safe!
Prevention of falling accident.High place work -> Ground work
Save cost!No need a shutdown of operation.Equipment rental fee saving.Energy saving.
Fast!
Shortened maintenance time.Immediately checking in caseof necessity.
Safety Technics of Lifting system
Locking Device
In the combined state, locking devicecan withstand up to 1000kgs. So thattension is not caused on the wire andthe lighting is not falled.
Electric contacts
The circular contact has a largesurface area and a indiviual elasticity so that electric currentflow is very exellent.
Detect no load
If lifter detects no load by lightingfixture reaches on the ground orhanged to obstacle, lifter stopsoperation automatically.
Detect over load
If lifter detects over load bylighting fixture hanged to obstacle, lifter stops operation automatically.
Auto stop function
Lifter can adjust the lowering height.If the lowering height was set byRCU, lifter always stops at setheight automatically.
No spark!
Even though the lighting is lowering in the state of lightingis turned on, the spark is not caused on the contacts of lifter.
Detect overheat
If lifter is overheated by repeatoperation, lifter checks temperatureof motor and stops operationautomatically.
Detect of ascend stopIf the lower part reaches at theupper part and is combined, lifter stops operation automatically.
spark
Powerdisconnecting
system
overheat
Lifting system is.....
stop stop
stop
stop
Control Device.....
- Lamp ON/OFF- UP & DOWN control- Lowering height setting
- Check usage time of Lamp- Check roundtrip times number
- Lamp ON/OFF - UP & DOWN control
- Lamp ON/OFF
Lifting system is controlled by manual panel or wireless control unit as below.
One RCU can control 1 million of lifters. Mini RCU is suitable for home because it can control 1 lifter.
But if transmission method of mini RCU is infrared rays, mini RCU can control many lifters.
Transmission method
Frequency(only RF)
RF FM
433.9200MHz
10mWOutput
Transmission lenghs
Control capability
within 100m
1 EA
3.0V(AAA x 2)Power
Individual control mode
Group control mode
Whole control mode
WP is attached on the wall
Transmission method
Frequency
RF FM
433.9200MHz
10mWOutput
Transmission length
Control capability
within 100m
1,000,000 EA
4.5V(AAA x 3)Power
Remote Control Unit
Transmission method
Frequency
Infrared Rays
-
10mWOutput
Transmission length
Control capability
6~7m
many
3.0V(AAA x 2)Power
Mini RCU
Transmission method
Frequency
RF FM
433.9200MHz
10mWOutput
Transmission length
Control capability
within 100m
1,000,000 EA
AC220VPower
Wireless Panel
Transmission method
Frequency
RF FM
433.9200MHz
10mWOutput
Transmission length
Control capability
within 100m
1,000,000 EA
AC220VPower
Motion Detect Sensor
Transmission method
Dimension
Signal by wire
500 x 600 x 180
MUNSELL No. 5Y 7/1Color of panel
Thickness of panel
Input Power
1.5T
AC 380V, 3 Phase
AC220VOperation Power
Wire Control Panel
Has same function with RCU
No risk of lost.
4 Group On / Off
Whole lighting On / Off
Easy and Convenient
control switch leads
Panel size can be different along the installation place.
Sensor detect motion of person and turn on the lighting orturn off the lighting.
Mini type
Model No.Feature MSI-1 MSI-3 MSI-5
Dimension(mm)
Weight(kg)
Loading Weight(kg)
Lowering Height(M)
Number of Wire
Wire O.D(SUS304 7x19)
Circuits capacity
Type of motor
162.2(W) x 170(H)
2.2kg
~1kg
2.2kg
~3kg
2.2kg
~5kg
15M
1
1.2mm
16A
DC Motor
162.2(W) x 170(H)
2.2kg
~3kg
2.2kg
~6kg
2.2kg
~9kg
7M
2
1.2mm
16A
DC Motor
Small size
Application
It is possible to install atnarrow ceiling space.
It is suitable for light lightingslike as downlight and LED.
Home, Railway station, Factory,Gymnasium, Church, Cafe etc.
MDI-3 MDI-6 MDI-9
Bracket
266.5mm217mm
Bracket for Concrete Ceiling
M8x20
Recessed mounting installation
Addition(M12)Concrete Ceiling
Bracket for home Installation for 6 Inch Downlight Installation for 8 Inch Downlight
Recessed mounting installation Recessed mounting installation Installation for home
181
12
1.9
M4x12
M4 x10
M4x5
M4 Screw
spring
M4x12
M4 Nut
M4x12M4 Screw
M4x8
Spring
M4x12
Compact type
Model No.Feature CSI-12
Dimension(mm)
Weight(kg)
Loading Weight(kg)
Lowering Height(M)
Number of Wire
Wire O.D(SUS304 7x19)
Circuits capacity
Type of motor
140(W) x 140(D) x 216(H)
3.1kg
3~10kg
15M
1
1.4mm
16A
DC Motor
3.13kg
3~15kg
10M
2
1.2mm
16A
DC Motor
The most popular model
Application
It is designed compact
It is suitable for light lightingslike as downlight and LED.
Gymnasium, Factory, Church,Railway station, Cafe etc.
CDI-15
Installation for rectangle pipe
Installation for H-beam
M12x30
M12 NutWasher
M8x20
Addition
Installation for concrete ceiling
M8x20
Addition
Bracket
196.2mm
245.7mm
Installation for concrete ceiling Installation for structure
Installation for Pipe Installation for Raceway Installation for Pipe
Hook type
Model No.Feature HSI-18
Dimension(mm)
Weight(kg)
Loading Weight(kg)
Lowering Height(M)
Number of Wire
Wire O.D(SUS304 7x19)
Circuits capacity
Type of motor
175(W) x 175(D) x 228(H)
6.53kg
3~15kg
15M
1
2.0mm
16A
AC Motor
6.62kg
6~25kg
10M
2
1.6mm
16A
AC Motor
Designed model at first
Application
This model is developed at firstand suitable for middle weightslightings like as HID andchandelier.
Gymnasium, Factory, Church,Railway station, Airport etc.
HDI-25
Installation for Concrete Ceiling Installation for Pipe Installation for H-beam Installation for H-beam
Installation for C type clamp Installation for rectangle clamp Installation for air circulation fan
M12x35Bracket
Addition266.8mm217.3mm
Heavy Duty type
Model No.Feature PSI-20
Dimension(mm)
Weight(kg)
Loading Weight(kg)
Lowering Height(M)
Number of Wire
Wire O.D(SUS304 7x19)
Circuits capacity
Type of motor
209(W) x 209(D) x 276(H)
8.19kg
4~20kg
15M
1
2.4mm
16A
AC Motor
8.44kg
4~30kg
15M
1
2.4mm
16A
BLDC Motor
Lifter for lightings of heavy loads
Application
The Heavy Duty type is for lightfittings with heavy loads suchas chandeliers.
Hotel, Lobbies, Wedding halls,Churches, Banquet halls, etc.
PSI-30
Installation for C type clamp Installation for H-beam
Installaion for concrete ceiling
8.19kg
8~35kg
10M
2
2.0mm
16A
8.44kg
8~50kg
10M
2
2.0mm
16A
PDI-35 PDI-50
Installation for Pipe Installation for Pipe
M12 x 35
Installaion for archipanel Installaion for eye-bolt Installaion for archipanel
Super Heavy Duty type
Model No.Feature
Dimension(mm)
Weight(kg)
Loading Weight(kg)
Lowering Height(M)
Number of Wire
Wire O.D(SUS304 7x19)
Circuits capacity
Type of motor BLDC Motor BLDC Motor
Lifter for super heavy lighting
Application
This model is suitable forextremely heavy weightslightings like as chandelier.
Banquet, Wedding hall, Church,exhibition etc.
Installation for Concrete Ceiling
Installation for H-beam
L2
L3
L4
L1
MOTOR
PFI-100
410(W) x 410(D) x 635(H)
57.5kg
50~100kg
30M
4
3.0mm
32A
58kg
100~300kg
20M
4
4.0mm
32A
PFI-300
58kg
60~200kg
20M
4
4.0mm
32A
59kg
100~500kg
15M
4
5.0mm
32A
PFI-200 PFI-500
Recessed mounting installation
Recessed mounting installation
Recessed mounting installation Installation for shackle
Installation example Installation example
Addition
M16x50Bracket
Multi Contacts type
Model No. HSI-18M
Dimension(mm)
Weight(kg)
Loading Weight(kg)
Lowering Height(M)
Number of Wire
Wire O.D(SUS304 7x19)
Circuits capacity
Type of motor
209(W) x 209(D) x 298(H)
6.53kg
3~15kg
15M
1
2.0mm
16A
AC Motor
8.19/8.44kg
4~20/30kg
15M
1
2.4mm
16A
AC/BLDC
PSI-20M
6.62kg
6~25kg
10M
2
1.6mm
16A
8~35/50kg
10M
2
2.0mm
16A
HDI-25MMSI-5M
162(W) x 176.5(H) 140(W) x 140(D) x 221(H) 175(W) x 175(D) x 251(H)
2.2kg
1~5kg
15M
1
1.2mm
16A
DC Motor
3.1kg
3~10kg
15M
1
1.4mm
16A
DC Motor
CSI-12M
2.2kg
2~9kg
7M
2
1.2mm
16A
3.13kg
3~15kg
10M
2
1.2mm
16A
MDI-9M CDI-15M PSI-30MPDI-35MPDI-50M
8.19/8.44kg
AC/BLDC
12
34
65
45
678
1
23
1
2
3
4
5
6
POWER( N - BLUE COLOR)
POWER( L - BROWN COLOR)
SIGNAL 1
SIGNAL 2
SIGNAL 3
SIGNAL 4
1
2
3
4
5
6
7
8 POWER( N - BLUE COLOR)
POWER( L - BROWN COLOR)
SIGNAL 1
SIGNAL 2
SIGNAL 3
SIGNAL 4
EARTH(GREEN/YELLOW)
SPARE
8 Contacts 6 Contacts
Dimension - Mini Type Dimension - Compact Type
Dimension - Hook Type Dimension - Heavy Duty Type
Contacts
Application
Single wire : 8 contactsDouble wire : 6 contacts
Camera, Speaker,DALI system,Lighting fixture, etc.
Smoke Detector type
Model No.Feature FSI-2
Dimension(mm)
Weight(kg)
Loading Weight(kg)
Lowering Height(M)
Number of Wire
Wire O.D(SUS304 7x19)
Circuits capacity
Type of motor
140(W) x 140(D) x 187(H)
3.1kg
1~2kg
15M
1
1.2mm
-
DC Motor
2.2kg
1kg
15M
1
1.2mm
-
DC Motor
LIfter for smoke detector
Application
This model is suitable formaintenance of smoke detector
Gymnasium, Factory, Church,Railway station, Buildings, etc.
FSI-1
Installation
162.2(W) x 110(H)
P type receiver
Answer
Call
Manual transmitter
Common
Earth
CCTV type
Model No.Feature MSI-5C CSI-7C
Dimension(mm)
Weight(kg)
Loading Weight(kg)
Lowering Height(M)
Number of Wire
Wire O.D(SUS304 7x19)
Circuits capacity
Type of motor
3.7kg
1~5kg
15M
1
1.2mm
16A
DC Motor
185.4(W) x 208.8(H)
10kg
4~15kg
15M
1
2.0mm
16A
AC Motor
Lifter for CCTV
Application
This model is suitable forclean and maintenance of CCTV.
Park, School, Building,Public facilities, Alleyway, etc.
HSI-15C
Installation example
Have a clear sight at all times, because clean the lense of CCTV by the CCTV Lifter.
Don't need to climb up high place. Can clean or maintain the CCTV safely on the ground.
Clear videoat all times
Maintain safelyon the ground
248(W) x 292(H)
6.2kg
3~7kg
15M
1
1.4mm
16A
DC Motor
1.5 inch Nipple
1.0 inch Nipple
1 1/2" PF Tap1" PF Tap
Installation for plate type CCTV
Installation forDome type CCTV
Banner Lifter & Partition Lifter
Model No. BSL-3
Dimension(mm)
Weight(kg)
Loading Weight(kg)
Lowering Height(M)
Number of Wire
Wire O.D(SUS304 7x19)
Circuits capacity
Type of motor
213.3(W) x 77.7(D) x 56(H)
3.1kg
less than 2kg
4M
2
0.8mm
-
AC Motor
2.2kg
less than 4kg
4M
4
0.8mm
-
AC Motor
BFL-3
352.3(W) x 77.7(D) x 56(H)
BDL-3
352.3(W) x 77.7(D) x 56(H)
3.1kg
less than 2kg
4M
2
0.8mm
-
AC Motor
ON
ON OFF
Batten type
Batten type synchronizes two lifters so that the two lifters operate at the same time.
Batten type generally applied to promotional placards, hanging screens and stage lighting to be located athigh place such as gymnasiums, performance halls and convention centers.