IME CASE STUDY

To be the leading manufacturer of Amphibious undercarriages and shallow water dredging related equipments.

About BHELINK

BHELINK main business activities are:

1) Designing and manufacturing of a wide range of marsh excavator and swamp buggy from 8 ton class right up to 40 ton class.

2) Designing and manufacturing of all types of excavator attachments such as the long reach front inclusive of long boom, arm and bucket. We also fabricate the clamshell bucket, log grapple and orange peel grapple for all types of excavator. 3) We are also the sole distributor of the bell submersible dredging pump from Holland which can be retrofitted to the amphibious excavator for higher productivity as compared to the excavation method using the bucket. With this pump, the amphibious excavator becomes an ''Amphibious Dredge Excavator''. Because of the nature of the construction of the amphibious excavator that enable it to also float in water, our machine is also known to some of our customers as floating excavator or floating pontoon excavator. The amphibious undercarriage of the excavator is built with the finest steel material and all the compartments are completely sealed and pressurised to ensure the floating capabilities of the excavator is realised. Be rest assured that each process of the fabrication of the swamp buggy and excavator is done according to strict engineering specifications combined with the latest equipment technology.

Our manufacturing factory is able to build a wide range of marsh or swamp excavator for our customers ranging from 8 ton class to 40 ton class. We can also customize or modified the existing standard excavator that you already have by fabricating only the amphibious undercarriage or floating pontoons that are able to fit onto your excavator. Due to our many years of expertise and experience, we are able to retrofit the amphibious undercarriages to all brand types of standard excavator like Caterpillar, Hitachi, Komatsu, Volvo, Sumitomo, Doosan and Hyundai. In addition, we also customize and fabricate long reach front (boom, arm and bucket) to the excavator to ensure that the reach of the excavator reaches its maximum capability. For a 20 ton marsh or swamp buggy, we can fabricate and fit a 50� long reach with a 0.5 m3 bucket onto it. The quality of our product and after sales service has already proven itself in the market with our distribution and supply network now reaches to countries like Thailand, Indonesia, Vietnam, India, Sri Lanka, Phillipines, Netherlands, Australia and even as far as South America and Nigeria!

AAAAAAAAAAAAAAAA

Why IME

IME providing them better service and support compare with other.

BHELINKSdn Bhd

IME TECHNOLOGY is Malaysia’s leading and #1 Solidworks certified Sales, Training, and Support Centre. With more than 30 years of establishment and experience, we have the most qualified, skilled and specialised technical expertise in the ASEAN region. Our team will ensure that the partnership between IME and our customers will grow, shine, and sustain.

About IME Technology

Industry:

Manufacturing

Previous CAD (years of using) :

Autocad, 2 years+

Product(s) Used (years of using) :

SolidWorks Premium and

SolidWorks Simulation Professional

To be the leading manufacturer of Amphibious undercarriages and shallow water dredging related equipments.

IME CASE STUDY

Challenge

When using AutoCAD they face challenges such as unable to visualize the 3D geometry as well as while doing assembly, they could not identify if there is any interference problems.

Success Metrics

i. Reduced number of design errorsii. Productivity increased as the accuracy increasesiii. Improved product quality

Solution

After implemented SolidWorks, they have a better visualization on the drawing. The better accuracy in terms of drawing has reduced the design error which helps in increasing the product quality. With SolidWorks they manage to improve their presentation such as presenting whole assembly and part by part clearer due to having better appearances presentation wise

BHELINK Sdn. Bhd.

H o t l i n e : 1300-88-2797

IME TECHNOLOGY SDN. BHD. (356192-T)

22A, Jalan PJS 1/46, Petaling Utama, 46150 Petaling Jaya, Selangor, Malaysia. T: +603-7783 6866F: +603-7783 4384

IME TECHNOLOGY (PENANG) SDN. BHD. (677811-M)

68, Jalan Perai Jaya 4, Bandar Perai Jaya, 13700 Pulau Pinang, Malaysia.T: +604-399 5571F: +604-399 5572

IME TECHNOLOGY (JOHOR) SDN. BHD. (677810-P)

11A, Jalan Jati 2, Taman Nusa Bestari Jaya,79150 Nusajaya, Johor, Malaysia.T: +607-512 7978F: +607-512 2162

www.cadcam.com.my