Belt Wyko UK_91

8/8/2019 Belt Wyko UK_91

1/6

IndustrialServices

BELT DRIVES


2/6

Belt Drives from WYKO

Industrial

Services

CONTI

NENTAL

.

CONT

INENTAL.

.

Engineering belt drive solutions for industryIn the UK alone, belt drives transmit hundreds of Megawatts of power around the

clock, many on critical machinery whos reliable and efficient performance is essentialto the effective operation of UK plc. Choose wisely, choose WYKO.

Two of the largest and mosttrusted names in the business,

Fenner and ContiTech, formthe core of the WYKO range.

Both brands combine qualityassured products with

excellent technical expertiseand resources.

Fenner belt drives incorporatedecades of experience in

manufacturing and their application inany of the harshest environments that

man has found.

ContiTech offers leading edgetechnology in both belt development

and manufacture.

With these resources, WYKO cansupply the best drive for the job, with

service to match.

DRIVE DESIGN ANDPROBLEM SOLVING.WYKO in-house expertise, backed by themanufacturers technology and specialistsprovide a valuable service ensuring belt drivesystems are optimal and cost-effective, withhigh-energy efficiency and lowest life-time costs.

This expertise is never far away, with over 100branches in the UK, operations on ContinentalEurope, and a world-wide distribution network.

Customers can always be sure of theultimate service.

COMPLETE RANGEEvery type of belt is available, from theubiquitous classical vee belt to the mostadvanced toothed belts, along with qualitypulleys and Taper Lock bushes.

Specialist belts such as extruded polyurethane,variable speed, flat transmission & conveyor

belts, and link belting, complete the range every one backed by WYKO expertise, inconjunction with that of the belt manufacturer.

This is truly a one-stop shop package,which customers can access with theultimate confidence.

MAINTENANCE EQUIPMENT DRIVE DESIGN

COMPLETE RANGETECHNICAL SUPPORT

Drive selection software


3/6

Friction Belts

CRE WEDGE BELTS

CLASSIC V-BELTS QUATTRO PLUS CRE BELTS

www.wyko.co.uk/energy.asp

FO-Z WEDGE BELTS

RIBBED BELTS

VEE BELTSFenner Classic, Conti Multiflex,Conti FO-Z Classic

Still used in a wide variety of applications whereworldwide availability, high ratio & reverse bendcapabilities are important.

Sections Z, A, B, C & D;

lengths from 370 13,700mm Comply with ISO4184, BS 3790, DIN2215

& RMA IP20 standards

Anti-static, heat & oil resistant(-40 to +70C)

Operate in ISO and RMA standard pulleygrooves

WRAPPED WEDGE BELTSFenner Power Plus, Conti Ultraflex

The mainstay of industrial V-style belt drives.Deeper section than vee belts to give greaterpower transmission capacity.

Sections SPZ, SPA, SPB, SPC & 8V; stocklengths up to 12.5m

Comply with ISO4184, BS3790, DIN7753& RMA IP22 standards

All belts anti-static to ISO1813, heat & oilresistant (-40 to +70C)

Off-the-shelf drives up to 500 kW rating

Available with industry standard fire-resistance properties

Operate in ISO (not 8V) and RMA (not SPA& SPC) pulley grooves

CRE WEDGE BELTSFenner CRE Plus, Conti-V Advance FO-Z, Fenner Quattro Plus

Wedge belts with raw flanks and cogged basematerial, giving greater versatility, efficiency andpower rating.

Sections XPZ, XPA, XPB & XPC; stock

lengths to 4.5m Comply with ISO4184, BS3790, DIN7753

& RMA IP22 standards


Most efficient V-type belt demonstrablelife-time cost reductions

Problem-solving belts; good for high ratios

Off-the-shelf drives up to 650 kW rating

Up to 40m/sec belt speed in Fenner pulleyswith ISO grooves

RIBBED BELTSConti-V Multirib

Low profile and very flexible.

Originally for automotive auxiliary drives, butdeveloped for industrial applications.

Rib sections PJ, PL & PM; stocked assleeves up to 4.05m length

Comply with ISO9982, DIN7867 standards


New Power-Elast version available forfixed centres

Smooth operation and resistance to beltvibration

Drives up to 300 kW using standardcomponents

PK automotive section available, also aramidcord variants

Pulleys with Taper Lock bores availableto order

POWER PLUS WEDGE BELTS


4/6

HTD BELTSSYNCHRONOUS LINEAR APPLICATIONS

No application or design is beyond our capabilities.

For the very best in belts talk to WYKO

TIMING BELTSFenner Timing Belt, Conti Synchrobelt,Synchroflex, Brecoflex

Original style timing belts with rectangularteeth, available in a huge range of tooth pitches(inch and metric), materials, lengths andwidths.

The ideal stock solution for economicalsynchronous drives.

P/U belts ideal for materials handling andpackaging applications

Tooth pitches XL, L, H & XH, stocked assleeves up to 175 length

Urethane endless belt sleeves stocked with5, 10 & 20mm pitch

Comply with ISO5296 & BS4548dimensional standards

Available anti-static to ISO 9563, heat & oilresistant (-40 to 100C)

Double sided, open ended & spliced tolength variants available

Full range of pulleys, including Taper Locktype, from stock

HTD BELTSFenner HTD, Conti Synchrobelt HTD& STD

Development of timing belts with cur vilineartooth form, enabling High Torque Drives.

Tooth pitches 5, 8 & 14mm, stocked assleeves up to 4.58m length

Comply with ISO13050 standard

Synchrobelt available with STD tooth form

Available anti-static to ISO 9563, heat & oilresistant (-40 to 100C)

Double sided & open ended variantsavailable

Full range of HTD pulleys, including TaperLock type, from stock

HIGH PERFORMANCESYNCHRONOUS BELTSConti Synchroforce CXP III & CXA III,Fenner Torque Drive Plus 3, ContiSynchrodrive

Sophisticated developments of the HTD beltstyle, using HTD type pulleys, and offering

highly cost-effective solutions for most anyapplicational requirement.

High power capacity, low noise & lowbacklash

Chloroprene/aramid belts rival chain fortorque transmission

Rubber belts anti-static to ISO9563 asstandard

Synchrodrive in urethane/steel construction ideal for lifting jobs

Stock of endless belts as sleeves; longlength available

HIGH PERFORMANCE BELTS

COMPLEX DRIVES

Chloroprene backing

Tension members

Glass fibre cord

Chloroprene backing

Polyamide fabric

HTD

TIMING

Synchronous Belt Drives


5/6

Pulleys & Miscellaneous Belts

OTHER BELTS &PRODUCTSFenner Concord banded belts

2 5 wrapped vee or wedge belts joinedtogether with a fabric band

Reduce the effects of belt vibration

Available in all sections; lengthsup to 12.5m

Spacing for either ISO or RMA pulleygrooves

Aramid cords available in some sections

POWERTWIST PLUS LINKBELTINGState of the art, rivet-less linkbelting, from synthetic materials

Sections Z, A, B & C; also round & double(hexagonal) sections

Power transmission, or as a conveyingmedium

Versatile alternative to vee belts; makeendless in situ

Highly resistant to heat, water & chemicals

Operates in standard vee pulleys

NU-T & SUPER-TLINK BELTINGVee and wedge section riveted linkbelting from synthetic materials

Sections, Z, A, B, C, SPZ, SPA, SPB & SPC

Highly durable and versatile alternative to

endless vee and wedge belts Operates in standard vee or wedge

belt pulleys

EXTRUDEDP/U BELTINGHuge range of plain, textured, hollowand reinforced extruded belting, in awide variety of sections and colours.

Round, vee and special sections

Twisted O-rings from stock

FDA/USDA compliant materials

Supplied as lengths, or made endless

PULLEYS &SHAFT FIXINGSTaper Lock pulleys for vee, wedge,ribbed and synchronous belt drives

A comprehensive range of pulleys for all typesof belt drive, using Taper Lock shaft fixing for

the ultimate in convenience and versatility. ISO Dual Groove pulleys for classical veebelts, plain and cogged wedge belts, andlink belts huge range from stock

Ribbed belt drive pulleys in J, L & Msections available to order

Taper Lock pulleys for all types ofsynchronous belt drive available fromstock

Taper Lock allows easy fitment and to &removal from a range of shaft diameters both metric and inch

Fenner 4-hole Taper Lock bushes guaranteeassembly balance quality

Nu-T&

Super Tpics

PULLEYS

POWERTWIST BELTING PLUS LINK BELTING

EXTRUDED P/U BELTING SHAFT FIXINGS


6/6

Fenner i s a r eg i s te r ed t r ade mark o f J . H . Fenner & Co . L imi ted.

imagine...belt drives that last longer and reduce costs

FLAT TRANSMISSION BELTINGMany leading brands, including ContiTech and Walker/Habasit

Other Products Available fromWYKO Industrial Distribution

WYKO Industrial ServicesMarketing Department

Amber Way, Halesowen,West Midlands. B62 8WG

Tel: 0121 508 6000Fax: 0121 508 6255

Web: www.wyko.co.uk

Shaft Fixings

Chain Drives

Electric Motors

Inverters

Belts for every conceivable

conveying application

Range of attachments

Range includes the latest synthetic

textiles and polymers

Power transmission drives and

transfer applications

Documents

Belt Wyko UK_91