8
Belt Conveyor Covers WORLD LEADER Designing And Manufacturing Conveyor Covers since 1996 www.capotex.com

Belt Conveyor Covers - capotex.com€¦ · conveyor belt frame. Dakar Inspection access from one side: the cover covers the upper part and one side of the conveyor belt, leaving one

  • Upload
    others

  • View
    17

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Belt Conveyor Covers - capotex.com€¦ · conveyor belt frame. Dakar Inspection access from one side: the cover covers the upper part and one side of the conveyor belt, leaving one

Belt ConveyorCovers

WORLD LEADER

Designing And Manufacturing Conveyor Covers since 1996www.capotex.com

Page 2: Belt Conveyor Covers - capotex.com€¦ · conveyor belt frame. Dakar Inspection access from one side: the cover covers the upper part and one side of the conveyor belt, leaving one

Growing demands in terms of safety and the environment.Why cover a conveyor belt?

The reasons are innumerable, emphasizing the labor safety and the protection of equipment and materials, as well as the drastic reduction of the environmental impact in the transport of materials.

Economy and legal responsibility

Reduction in losses during transportation. Protection

of transported material.

Compliance with regulationsReduction of

disbursements derived from sanctioning

procedures.

Equipmentprotection

Reduction of maintenance costs.

Increased e�ciency in the transport of materials.

Environmentalprotection

Reduction of emissions.

Energy e�ciency of the facilities

Workers Safety

Reduction of the risk from work accidents.

Isolating the moving parts from the belt conveyor

avoids the risk of entrapments and other

accidents.

Page 3: Belt Conveyor Covers - capotex.com€¦ · conveyor belt frame. Dakar Inspection access from one side: the cover covers the upper part and one side of the conveyor belt, leaving one

FormatsOur product

Materials

Cover lengths

Our product

Semicircular shape 180°.

Round cover without straight parts.

Full protection gallery.Tape and walkways.

The bonnet plus has an elliptical shape and therefore less height and less wind resistance.

Classic

Arch Capobig

Plus

Galvanized steel

Pre-lacquered steel

HPS 200Ultra

Stainless Steel Aluminum Polyesterfiber

1,064 mm corrugated1,292 mm corrugated

Available for galvanized steel 836 mm corrugated 456 mm corrugated

Page 4: Belt Conveyor Covers - capotex.com€¦ · conveyor belt frame. Dakar Inspection access from one side: the cover covers the upper part and one side of the conveyor belt, leaving one

ModelsOur product

Patented design, versatility and strength have turned this model into an industry standard throughout the world of belt conveyors.

Madrid

Our most economic systems. Completely closed: the cover covers 180º, up to the conveyor belt frame.

Dakar

Inspection access from one side: the cover covers the upper part and one side of the conveyor belt, leaving one side free for maintenance.

Durban

Roof-type cover installed to cover only the upper part of the conveyor belt.

Capoarc

This design was created for installation in cases in which access from both sides of the belt was not possible.

París

Inspections accesses on both sides: the cover only covers the upper part of the belt, leaving both sides free for maintenance.

Berlín

Page 5: Belt Conveyor Covers - capotex.com€¦ · conveyor belt frame. Dakar Inspection access from one side: the cover covers the upper part and one side of the conveyor belt, leaving one

ModelsOur product

Return belt enclosure: Eliminates return belt misalignment due to external wind pressure.

Caposide

Cover adapted to any fire-extinguishing system available on the market.

Capofire

Fully sealed with the belt and cover.

Caponoise

Total access to the interior.

Capobig

Safety protection: Prevents from accidental manipulation of the return belt.

Capotray

Auto-adaptable to belt movement.

Caposkirt

Page 6: Belt Conveyor Covers - capotex.com€¦ · conveyor belt frame. Dakar Inspection access from one side: the cover covers the upper part and one side of the conveyor belt, leaving one

FixingsOur product

C1 Lock Hinge C2 Standard Hinge

C5 Self-Drilling Screw C6 Clamp

C7 Ergonomic Hook with Strap

C8 Ergonomic Hook with Pin

C9 Hook

Page 7: Belt Conveyor Covers - capotex.com€¦ · conveyor belt frame. Dakar Inspection access from one side: the cover covers the upper part and one side of the conveyor belt, leaving one

Engineering and innovation at the service of protection.Capotex, in evolution since 1996

Capotex is a leading company specialized in the design, manufacture and commercialization of advanced protection systems for the protection of conveyor belts, installations and people.

The recognition of excellence and innovation has materialized with various awards and distinctions, such as the SMOPYC Award for Innovation, obtained in 2008 and 2014.

About usWorl Leaders

Since 1996, Capotex has designed, manufactured and marketed more than 450,000 meters of covers in more than 50 countries, being a world leader in its sector.

Estados Unidos

USA

Brazil

Russia

Honduras

Panamá

Guadalupe

Norway

Sweden

Finland

Colombia

Perú

Chile

Canada

UK

LetoniaLituania

Switzerland

Austria

Polonia Rep. ChecaHungría

SlovakiaSlovenia Croatia

Bulgaria

Holland

Belgium

Germany

FranceSpain

Morocco

Algeria

South Africa

Togo

Tanzania

Kenia

Arab Emirates

IndiaHong Kong

South Korea

Malaysia

Australia

Italy

Túnez

Cyprus

Greece Turkey

Map+50 countries

Page 8: Belt Conveyor Covers - capotex.com€¦ · conveyor belt frame. Dakar Inspection access from one side: the cover covers the upper part and one side of the conveyor belt, leaving one

WORLD LEADER

Designing And Manufacturing Conveyor Covers since 1996www.capotex.com

HeadquartersColombia, 1 - 28220 Majadahonda. Madrid. Spain

Tel: +34 91 634 71 92 - Fax: +34 91 636 21 15

Smopyc Technological InnovationGolden Medal 2008 & 2014

For a cleaner Planet.