BED HARDWARE/SLATS - Bruce Bochenek Salesbrucebocheneksales.com/catalog.pdf · Bruce Bochenek Sales BED HARDWARE/SLATS BED SLATS 65-NT Upward Hooks 68-NT Downward Hooks BED HOOK ADAPTERSMODIFICATION

Phone 708-233-0110 Toll Free 800-923-0110 Fax 708-233-0111

*See Price List for Price, Quantities, Sizes Available, Color Selection, Item Numbers and Quantity Discounts

1

Bruce Bochenek Sales

BED HARDWARE/SLATS

BED SLATS

65-NT Upward Hooks

68-NT Downward Hooks

BED HOOK ADAPTERS MODIFICATION PLATES

66-NT Modification Plates

SWING HINGE

67-NT Swing Hinges

8B Short Display Rails Bolt On

Both are used to

attach hook-type head

boards to bolt on

frames.

Modi plates are

designed to

compensate for any

difference between the

width of the headboard

and the bed frame.

Adjustable, up, down

and from side to side.

Attach two twin bed

rails to a King-Size

Headboard. Swing

hinge allows the bed to

swing apart for easy

cleaning.

DISPLAY RAILS

Display

headboard

and

footboard on

sales floor.

Approximately

7-10 inches.

8HO Short Display Rails Hook On

Hook On Shown

Use as support for

bedding. Board size

1" x 3" Actual size

¾” x 2 1/2"

BS41-NT 41"

BS56-NT 56"

BS60-NT 60 1/2"

BS62-NT 62"

BS64-NT 64"



2


FASTENERS

Full thread

Available Thread ¼ x 20 and 5/16 x 18 and

3/8 x 16

(*various lengths)

CARRIAGE BOLTS

HANGER BOLTS

HEX TAP BOLTS

METRIC HEX TAP BOLTS


3/8 x 16 (*various lengths)


3/8 x 16 (*various lengths). Hex Head.

Use Magnetic Hex Head Driver (see p. 79),

wrench, or socket

Available Thread M6, M8 & M10

(*various lengths). Hex Head.

Use wrench or socket to fasten.

Full thread

B O L T S

6 MM Looks similar to 1/4 x 20



M E T R I C

SIZE CONVERSION CHART

FOR MILLIMETERS

Length in

Millimeters Inches

30 MM 1.18

40 MM 1.57

45 MM 1.77

50 MM 1.96

55MM 2.16

60 MM 2.26



3


N U T S

FASTENERS

CROSS DOWELS

Available thread ¼ x 20

5/8” Length

HEX NUTS INSERT NUTS(METRIC)

Metric Drivers also

available for easy

insertion

(sold separately).

SCREW IN

INSERT NUTS

Replaces Tee-Nut from

the outside. Easily

attaches with three #6

Screws

(sold separately).

SIN31 5/16 x 18 Thread

SIN37 3/8 x 16 Thread

INSERT NUTS

HEX NUTS(METRIC)

CD025

HN12 8/32 Thread

HN25 1/4 x 20 Thread

HN31 5/16 x 18 Thread

HN37 3/8 X 16 Thread

MHN6 M6 Thread

MHN8 M8 Thread

MHN10 M10 Thread

Use for missing Tee-

Nuts, fastens from the

outside.

Metric Drivers also available for easy

insertion (sold separately).

1/2” Length

IN25 1/4 X 20

IN31 5/16 X 18

IN6MM 6MM 1/2” Length

IN8MM 8MM 1/2” Length

IN10MML 10MM 1” Length



4


FASTENERS

N U T S

TEE NUTS

(FOUR PRONG)

Available Thread ¼ x 20, 5/16 x 18 and 3/8 x 16.

We stock ¼ x 20 and 5/16 x 18 in both long and

short shaft/barrel lengths.

TEE NUTS

M E T R I C

(FOUR PRONG)

M10 Thread

MTN10

WING NUTS

Cold forged ¼ x 20

and 5/16 x 18

Threads

TN25 ¼ x 20 7/16 (Long)

TNS25 ¼ x 20 5/16 (Short)

TN31 5/16 x 18 5/8 (Long)

TNS31 5/16 x 18 3/8 (Short)

TN37 3/8 x 16 7/16

Barrel LengthThread Size



5


FASTENERS

S C R E W S

DOWEL SCREWS

DRYWALL SCREWS

FLAT HEAD WOOD

S C R E W S

HEX LAG SCREWS

MACHINE SCREWS/

H E A D B O A R D

BOLTS

SHEET METAL SCREWS

Both ends have screw points ¼ x 20,

5/16 x 18 and 3/8 x 16 Threads available.

(*various lengths)

Black phosphate, Bugle head. Phillips drive.

(*various lengths)

Recex Head (square or Phillips drive) heat treated,

plain finish, cutting threads resist wood splitting.

Available in 6, 8 and 10 sizes.

(Brass finish available also in 6).

(*various lengths)

Thread ¼, 5/16 and ½

(*various lengths)

Round head, Phillips drive up to 1/2".

Larger sizes slotted. ¼ x 20 and 5/16 x 18 Thread.

(*various lengths)

Pan Head/Philips Drive 6, 8, and 10

(*various lengths)

Use Magnetic Hex Head Driver (see p. 79),

wrench, or socket



6


SHEET METAL SCREWS/TRUSSHEAD

FASTENERS

TRUSS HEAD/

PHILIPS DRIVE

TRIM HEAD SCREWS

TRIMIT HEAD SCREWS

TRIMIT HEAD SCREWS

(METRIC)

Thread M4.

Metric threaded screws for drawer handles/

pulls.

Screw has breakway threads at the

following lengths: 19, 25, 32, 38, and full

length at 45MM

(Five available sizes in one screw/One size

fits all.)

Thread 8/32 use for door handles and pulls.

(*various lengths)

Small head makes it easy to countersink.

Size 6 x 1 5/8"

THS06162

TRUS8062 8 x 5/8



7


FASTENERS

W A S H E R S

FLAT USS WASHERS

FLAT FENDER

W A S H E R S

(USS)

LOCK WASHERS-

MEDIUM SPLIT

Sizes Available ¼, 5/16 and 3/8"

LW25

LW31

LW37

¼ x 1 1/4" diameter

FW25

Sizes Available 3/16, ¼, 5/16 and 3/8”

W19 3/16"

W25 1/4"

W31 5/16"

W37 3/8"



8


FURNITURE PARTS/

C O M P O N E N T SCASTERS-STEMS-SLEEVES

CASTER STEM

STEMCSTFR 7/16 Friction Ring Stem

STEMCSTSS Socket Stem (Push In)

STEMCSTTH Threaded 1/4-20 Stem

STEMCSTTP Top Plate Stem

Top:Top Plate

From L to R:

Friction, Socket,

Threaded

2" Caster, Twin Black

Wheel.

Caster Stems sold separately

CASTTWBLK Black Hood

CASTTWBRA Brass Hood

CASTTWCHR Chrome Hood

CASTERS

CASTER SLEEVE

Use with socket/push-in type stem casters. Metal

socket sleeve 3/8" hole, ¾ diameter base, 1 ¼”

height.

C100

Caster Sleeve

(bottom) pictured

with Caster



9


FURNITURE PARTS/

C O M P O N E N T S

C O R N E R SINSIDE CORNERS(EQUAL DIMENSIONS)

INSIDE CORNER BRACE

L30 3/4 x 3/4 13

31 1 x 1 16

32 1 1/2 x 1 1/2 14

33 2 x 2 14

34 2 1/2 x 2 1/2 14

35 3 x 3 13

Size Gauge

41 1 ½ X 2 ½ 14

42 2 X 2 14

43 2 ½ X 2 ½ 14

Size Gauge

Size Gauge

Top

to

Bottom

41, 42,43

Left: B8

Right: 215

Left to Right: L30, 31,32,33,34,35

FLAT CORNERS

B8 1 3/8 x 1 3/8 22

215 2 x 2 18



10


C O R N E R S

FURNITURE PARTS/

C O M P O N E N T S

INSIDE CORNERS(DIFFERENT DIMENSIONS)

3 x 2 x 2 (16 GAUGE)

2 x 7/8 x 1 1/16 (16 GAUGE)

2 x 1 x 1(16 GAUGE)

4 x 1 x 1(16 GAUGE)

3 3/4 x 2 1/4 x 2 3/4

1 1/2 x 2 1/2 x 2 1/2

(13 GAUGE)

(12 GAUGE)

A205

D275

L1

L10

L9

BH101505



11


FURNITURE PARTS/

C O M P O N E N T S

DOOR CABINET HARDWARE

MAGNETIC CATCH

MAGNETIC PRESSURE

C A T C H

(PUSH-TYPE)

GLASS DOOR HINGES

249 Brass

250 Black

244 Double Rd

245 Single Square

246 Double Square

251 Single Rd

242 Magnetic Catch

ROLLER CATCHES

10102 Low Double Roller Catch

10107 High Double Roller Catch

10109 Vertical Single Roller Catch

GLASS DOOR TOUCH

CATCH PLATES

247 Brass

248 Black

252 Brass/with lip

HINGE BUSHING

14

Black nylon

bushing for

hinges.

From L to R: High, Low, Vertical

Strike Plates included.



12


FURNITURE PARTS/

C O M P O N E N T S

DOWEL PINS/PLUGSDOWEL PINS

(UNFINISHED)

BUTTON PLUG(UNFINISHED)

FLAT PLUG

(UNFINISHED)

ROUND PLUG

(UNFINISHED)

Use to connect two pieces of wood together.

DP25300 1/4 x 3"

DP31300 5/16 x 3"

DP37300 3/8 x 3"

Great to cover up screw heads.

BP25 1/4"

BP31 5/16"

BP37 3/8"


FP25 1/4"

FP31 5/16"

FP37 3/8"


RP25 1/4"

RP31 5/16"

RP37 3/8"



13


FURNITURE PARTS/

C O M P O N E N T S

DRAWER HARDWARE

DRAWER GLIDE DRAWER GLIDE

C O M P O N E N T

Case runner component fits inside metal case

runner which is fastened to case.

4030 Runner Component

Fastens to the back of drawers then slides

freely over metal case runner.

4028 Drawer Back Bearing

4029 Drawer Back Component

4028

4029



14


FURNITURE PARTS/

C O M P O N E N T S

LEGSROUND PLASTIC,

ROUND WOOD,

TAPERED WOOD

TRIANGULAR

PLASTIC CORNER

LEGS

LEG PLATES

ROUND PLASTIC LEGS

ROUND WOOD LEGS

L to R: Round Wood, Tapered Wood,

Round Plastic

TAPERED WOOD LEGS

Brown color, with 5/16" thread bolt attached.

PRL150 1 1/2"

PRL225 2 1/4"

PRL250 2 1/2"

PRL300 3"

PRL400 4"

PRL500 5"

RL150 1 1/2"

RL200 2"

RL250 2 1/2"

RL300 3"

RL400 4"

RL500 5"

RL600 6"

Brown color, with 5/16" bolt attached.

TL400 4"

TL500 5"

TRL125 1 1/4"

TRL175 1 3/4"

TRL225 2 1/4"

5/16-18

Thread

Straight Plate

14 Guage

U310

Brown color, with 5/16" thread bolt attached.



15


FURNITURE PARTS/

C O M P O N E N T S

MENDING PLATES

51 2" 2 Holes 11 Guage 2"x1/2"

52 3" 4 Holes 14 Gauge 3"x3/4"

53 4" 4 Holes 12 Gauge 4"x3/4"

LIF 2" x 2" 4 Holes 16 Gauge 2"x2"

STK502 3" 4 Holes 22 Gauge 3"x3/4"

L to R: 51, L1F, 52

Shown Right: STK502



16


FURNITURE PARTS/

C O M P O N E N T S

SHELF SUPPORTS

LS5 Clear Plastic For 1/4" Hole ½”

With brown vinyl coated foot.

LS7 Antique Brass Metal For 1/4" Hole ¾”

LS8 Bright Brass Metal For 1/4" Hole ¾”

LS10 Clear Plastic For 1/4" Hole 1"

LS11 Clear Plastic For 1/4" Hole 1/2"

LS12 Tan Plastic For 1/4" Hole 1/2”

Pin Size Arm Extension






17


FURNITURE PARTS/

C O M P O N E N T S

SHELF SUPPORTS

With screw-hole to secure wood

shelves.

Pin Size Arm Extention

RSP05 Bright Brass Metal 5mm Hole 1" Cylindrical Type

12425BR Bright Brass Metal For 1/4" Hole 10mm Spoon Foot Style

12450BR Bright Brass Metal For 5mm Hole 10mm Spoon Foot Style



LS13 Antique Brass Metal For 1/4" Hole 7/8"



18


TABLE HARDWARE

FURNITURE PARTS/

C O M P O N E N T S

TABLE LEAF LEVELER

Leaf leveler with

1 hole

length 23/8"

Corrects leaf

height to match

table height.

Tip can be bent.

C161

TABLE PINS

Use to join 2 pieces

of wood together.

TP025 1/4" 1"

TP031 5/16" 1"

TP037 3/8" 1 1/4"

TABLE LOCK

Medium duty table lock.

Brass plate, zinc handle, spring loaded cam action.

Includes lock and catch.

ST407



19


FURNITURE PARTS/

C O M P O N E N T S

Turn Buttons

Used to hold glass panels in cabinets.

278C Clear Flush

278DB Brown Flush

27818C Clear w/1/8" Tip

27818B Brown w/1/8" Tip

GCS1 Adjustable Metal

TBB Brown Rectangular Button w/ removable 1/8" tip

TBC Clear Rectangular Button w/ removable 1/8" tip.

Top:

TBC

Bottom:

27818B

GCS1



20


MIRROR SUPPORTS

1" wide slotted support

Color: Brown, Screws furnished

Packaged 12 rods per carton.

103-NT 48"/No Clamps

163-NT 60"/No Clamps

1" wide slotted rod with 3 attached

Brackets per rod

Color: Brown, Screws furnished

Packaged 12 rods per carton.

101PB-NT 48" w/ 3 Clamps

161PB-NT 60" w/ 3 Clamps

Above: 103-NT/163-NT Above: 101PB-NT/161PB-NT



21


MOVING-WAREHOUSE-

DELIVERY SUPPLIES

CARPET DOLLY

PIANO DOLLY

DOOR JAM PROTECTOR

Size 18" x 30"

Hardwood frame, carpeted, 3" swivel casters

W782

Size 18" x 30"

Heavy duty hardwood frame, non skid rubber

ends (prevents slipping) 4" swivel casters

W783

Three spring steel clips, covered with webbing and

sewn into 24" x 72" quilted pad. Protects furniture

and frames going thru doorways.

DJP

E TRACK

ADJUSTABLE STRAP

2” Strap with CAM Buckle with Spring E fittings.

Breaking strength 3000 lbs.

Load limit 1000 lbs.

TI12E 12 ft.

TI16E 16 ft.

TI20E 20 ft.



22


MOVING-WAREHOUSE-

DELIVERY SUPPLIES

FURNITURE PADS

Woven cover, 1" zigzag stitching, double stitched

binding.

Differences between pads include: color

preference,look and weight. Some customers

prefer the Deluxe pad which provides a more

professional look.

W553 Multi-Color, Standard Weight

W554 Deluxe blue/blue, Heavy Weight

H E A V Y W E I G H T

WORK GLOVES

GL8398

Standard heavyweight string knit work gloves.

7 Gauge cotton/Poly-yarn, rubber band cuff.

Natural white color. Black PVC resins coat both

sides os gloves which creates a tacky grip for

easier handling.

12 pairs/Box



23


MOVING-WAREHOUSE-

DELIVERY SUPPLIES

HAND TRUCK-

M A G L I N E RHAND TRUCK COVERS

Lightweight aluminum, strong and durable,

assembled in modular fashion making it easy to

replace a nose or wheel.

1A11-815

48" High,

Straight Back Frame,

Loop Handle,

Nose Plate 14 x 7 1/2

Hard Tires 8" x 15/8"

Approximate Weight 18 lbs.

1A11-1025

48" High,

Straight Back Frame,

Loop Handle

Nose Plate 14 x 7 ½

Hard Tires 10" x 21/2"

Approximate Weight 26 lbs.

Move furniture and floor samples damage free.

Quilted cover attaches with hook and loop straps.

HTC48 48" Standard Size

HTC60 60" Extra Long

Above: 1A11-1025

LEVELING WEDGES

Breakaway brown plastic wedges. Ideal for uneven

Floors, Door adjustments, Pier Cabinets etc. Save

a service call by furnishing delivery Personnel with

this easy to use item. A must for outside service.

1264



24


MOVING-WAREHOUSE-

DELIVERY SUPPLIES

MATTRESS CARRIER

SHOE COVERS

Non-woven Fabric Covers fit over, shoes,

protecting customer’s carpet from weather

elements.

One-size fits all.

Perfect for Delivery/Service Personnel.

SCHOV50

PALLET RUBBER BANDS

1" Wide Rubber Bands

Use to keep pads or plastic on furniture. Can also

be used to prevent doors from opening during

transportation.

PB56 Use for Love Seats, Chairs, China

cabinets etc.

(28" Folded Length)

PB72 Use for Sofas and larger pieces

(36" Folded Length)

THIN RUBBER BANDS

¼” Wide Rubber Bands

Use to keep skirts up on Upholstery Pieces. Can

also be used to keep plastic on merchandise.

SBAN17 Small 17" Folded

SBAN23 Medium 23" Folded

SBAN40 Large 40" Folded

2" wide nylon straps coupled with welded

steel rings.

EZMC

Allows easy movement of bedding without

scuffing.



25


TWINE

TIE WEBBING-STRAPS

2" x 100'

Straps and Ties secure shipments on delivery

trucks.

TW150 1" x 150'

TI15 1" x 15'

Propropylene Twine

Great for customer pick-ups, tying down trunks or

tie downs on trucks.

Synthetic Tying Twine

Tension Strength 260 lbs.

Knot Strength 205 lbs.

4500 Feet per Tube

450T

MOVING-WAREHOUSE-

DELIVERY SUPPLIES

Won’t mar or burn furniture.

Cut to desired length

NYLON TIE(15 ft W/LOOP)

Cut to desired length.

NYLON TIE

(150 ft. ROLL)

TI60

100% COTTON

Loop sewn into one end.



26


PLASTICS

POLYETHYENE BAGS 1 Mill. AND 3 Mill.

Description Size Bags/Roll

175575 XXXXXX Stove/Washer/Dryer 32 x 28 x 58 275

175576 XXXXXX Refrigerator 39 x 33 x 84 160

120599 126481 Sofa 144 x 45 135 x 54 100 45

120598 126964 Loveseat 100 x 45 115 x 54 150 55

120597 126482 Chair 72 x 45 72 x 54 200 85

145133 XXXXXX D/Chair 40 x 40 400

XXXXXX 121588 Small Chair* 32 x 28 x 54 120

XXXXXX 125275 Large Chair* 32 x 28 x 72 85

XXXXXX 121586 Chest* 36 x 30 x 80 70

XXXXXX 125276 Large Chest* 74 x 100 50

XXXXXX 121587 Hutch* 72 x 48 x 80 40

1 Mill 3 Mill

MATTRESS BAGS – PILLOW TOP 3 Mill

MATTRESS BAGS - REGULAR 3 Mill.

504PT Twin Extra Long 39 x 15 x 94 70

514PT Full 54 x 15 x 90 55

524PT Queen 60 x 15 x 94 45

534PT King 78 x 15 x 94 35



455 MB Twin Extra Long 39 x 10 x 90 75

514PT Queen 60 x 10 x 90 50

XXXXXX INDICATES NOT AVAILBLE IN THIS SIZE./MILL

*INDICATES PLASTIC BAG CAN BE HEAT SHRUNK W/SHRINK FAST GUN



27


PLASTICS

STRETCH WRAP 80 Gauge

HW0580 5" x 1500 ft 80 Gauge

HW1280 12" x 1500 ft 80 Gauge

HW1580 15" x 1500 ft 80 Gauge

HW1880 18" x 1500 ft 80 Gauge

Use for sealing, securing and wrapping items

together.

For instance: Use to keep Upholstery Skirts

raised in place, to secure plastic bags to

Upholstery items, or to prevent cabinet doors

and drawers from opening.

STRETCH WRAP

DISPENSER

(ADJUSTABLE)

STRETCH WRAP

DISPENSER

(NON-ADJUSTABLE)

Heavy duty

dispenser,

features control

tension knob and

adjustment for

height to

accomidate up to

18" Stretch Wrap

rolls.

11910

Plastic hand Held dispenser for 5" Stretch Wrap.

5318

Pictured with dispenser 11910



28


PROTECTIVE PRODUCTS

FELT DOTS

FELT FLOOR

P R O T E C T O R S

FELT ROLL

FELT SAFEGLIDE® PACKAGES

FELT

Felt dots, 1/16"

thick, brown, four

diameters, 500

pieces per roll,

Pressure Sensitive

Adhesive

Use under mirrors,

hutches, Show

Room accessories

etc.

Felt dots, 1/8" Thick,

available in 1" and

7/8" Diameter, Grey,

500 individual pieces

per box. Pressure

Sensitive Adhesive

Excellent to use

under all types of

Furniture. Protects

customer’s floor from

damage.

FT4005 1"

FT4006 7/8"

Felt roll, White,

1/8" Thick,

1" wide x 100 ft., Pressure Sensitive Adhesive.

Cut to desired length.

FTRL100 1" x 100 Ft

Felt dots

individually

packaged,

White, 1/8"

thick,

available in

four sizes.

Pressure

Sensitive

Adhesive

FT4001NT 3/4" 24

FT4002NT 7/8" 20

FT4003NT 1 1/8" 12

FT4004NT 1 7/8" 4

Pieces per Pkg.

1211 3/4"

1216 3/8"

1217 1/2"

1218 1"

Diameter



29


PROTECTIVE PRODUCTS

GLIDES

ADJUSTABLE GLIDES

CUSHION GLIDE

(METAL)

SINGLE NAIL

CUSHION GLIDE

(NYLON)

Threaded adjustable, plastic glides. Won’t rust.

KG3000 5/8 diameter 1/4-20x1" 1 ¼”

KG3001 7/8 diameter 1/4-20x1" 1 ¼”

KG3002 1 1/8 diameter 5/16-18x2 1/4" slotted 2 ¾”

KG3003 1 1/8 diameter 5/16-18x1 1/2" 1 ¾”

Diameter/Thread/Stem Length Overall Height

Steel Glide

(nail-in) single

nail with thick

shock and sound

absorbing

cushion.

KT3393 7/8"

KT3394 1 1/16"

Base Diameter

White Nylon

(won’t rust) 7/8"

Base. Single nail

with thick black

sound absorbing

shock cushion.

KT3399

Shown: KG3000



30


THREE PRONG

METAL GLIDES

DRAWER TACKS (NAIL-IN)

PROTECTIVE PRODUCTS

TACK GLIDES

(METAL/NAIL-IN)

GLIDES

Use to level drawers and other applications where

minor height adjustment is necessary.

TACK GLIDES (PLASTIC/NAIL-IN)

Steel Three Prong

Glides. Use on

bottom of Cases,

Cabinets and

Upholstery. Sold in

three popular sizes

TPG050 1/2"

TPG062 5/8"

TPG075 3/4"

Diameter SizeMetal ¾” Diameter flat base.

Use under Cabinets, various Furniture pieces,

and Upholstery.

STG075

KT3374 3/4" Oval White

KT3391 5/8" Flat Brown

KT3392 3/4" Flat Brown

KT3392W 3/4" Flat White

Diameter /Type

Use under Cabinets, Furniture and Upholstery.

Won’t rust!

STD50KT80B

OVALFLAT

Material Base Size Base Thickness

KT80B Plastic ¾” x ½” (rectangular) .08

STD50 Steel ½” (round) .64



31


PROTECTIVE PRODUCTS

SAFEGLIDES ®

GLIDESSAFEGLIDE ® BRAND

Felt hammer-in floor protector glide, superior

holding strength using rivet style in place of

single nail.

Wool felt pad attached to molded plastic

base.

Top of the line, Will not rust!

Purchase in bulk for store/shop use or

packages (four glides per) for resale in your

show room.

Sold in three popular sizes and two colors

(brown or white) selections.

KT3395BNT 7/8" 150/Box Brown

KT3396BNT 1" 100/Box Brown

KT3396WBNT 1" 100/Box White

KT3397BNT 1 1/2" 75/Box Brown

Size/Qty/Color

KT3395NT 7/8" Brown

KT3395WNT 7/8" White

KT3396NT 1" Brown

KT3396WNT 1" White

KT3397NT 1 1/2" Brown

KT3397WNT 1 1/2" White

Size/Color

(4 per package)

White Felt Floor protecting glide,

with plastic stem, inserts into hole

in base of chair, 7/8" Diameter

base won’t rust. Sold in packages

of four.

KT3398WNT

KT3395NTLEFT:

RIGHT:Bulk

STEM GLIDE (SAFEGLIDE ® BRAND)

RESALE PACKAGING

BULK PACKAGING



32


REFINISHING-TOUCH-UP

AEROSOLS

BLUSH LEVELOR

CLEAR TOP COATS

FLOW OUT LACQUER

Removes moisture

and white hazing

trapped under

finish while

spraying during

inclement weather.

Magically restores

finish to its natural

beauty. HAP’s

Compliant

539

Formulated with

exactly the

correct amount of

solids, providing

your repair with

an excellent

finish. HAP’s

Compliant

540 Gloss

541 Semi Gloss

542 Flat Lacquer

543 Dead Flat Lacquer

544 Satin Lacquer

Corrects over sprayed and orange peeled

finshes. HAP’s Compliant

546 Gloss Flow-out Lacquer

547 Flat Flow-out Lacquer



33



SEALERS

HEAVY BODY T O N E R S

T O N E R S

High solids for fast build up and level

sanding. Sealer fills surface scratches

after Burn-In application also. Specially

formulated not to turn white. A must have

for the Professional! HAP’s Compliant

545

Specially formulated toners to complete your repair

with a professional, undisturbed finish. Sheen look

can be achieved with application of clear top coats.

HAP’s Compliant

506 Honey Maple/Golden Oak

518 Venetian Cherry/Reddish Maple

520 Medium Walnut/Burnt Umber

523 Vintage Oak

524 Brown Cherry/Brown Mahogany

526 Fireside Oak/Brown Cherry

527 Traditional Mahogany

531 Extra Dark Oak/Van Dyke Brown

AEROSOLS



34



B R U S H E SOX HAIR BRUSHES

SABLE FILBERT

(CAT’S TONGUE)

Very soft and supple natural fiber. Designed

especially for glazing and/or high-lighting

applications.

Grey handle, fan shaped bristle with flat ferrule.

Overall length 8 1/2" – 9 1/2".

3 Sizes available

100% Red Sable Brush Tapered Bristle Corners

with fine point. Round black wood handle, round

ferrule, oval at bristle attachment. Overall length

6 3/4"-7"

Excellent for Touch-up especially edging and

backg round coloring.

725-1/2 1/2"

725-3/4 3/4"

725-1 1"

725 Assortment (1 of Each)

Size

3170-0 0

3170-2 2

3170-4 4

3170-6 6

3170-8 8


Size



35



B R U S H E SSABLE ROUND BRUSHES

SABLE GRAINER BRUSHES

100% red Sable, round brush with a tapered fine

point allowing for long strokes. Can use to lay in a

color or create a pencil thin line. Bristles snap

back to original shape after stroke is complete.Excellent all around brush. Round black handle,

round ferrule, overall length approx. 6 ½” – 7".

Available in 10 popular sizes.

100% red Sable, round brush extremely thin and sharply pointed. Use to lay in missing Grain.

Round black wood handle, round ferrule, longer bristles than 3250 series, overall length 6 ½”- 7" Available

in 4 sizes.

3585-10/0 10/0

3585-3/0 3/0

3585-0 0

3585-2 2


Size

3250-3/0 3/0

3250-0 0

3250-1 1

3250-2 2

3250-3 3

3250-4 4

3250-5 5

3250-6 6

3250-7 7

3250-8 8


Size



36



BURN-IN STICKS BY PREMIER ™

BURN-IN STICKS -LUBE-KNIFE

BIS819 Universal Walnut

BIS820 Medium Walnut

BIS821 Oak

BIS822 Medium Pecan

BIS823 Vintage Oak

BIS824 Brown Cherry

BIS825 Light Red Mahogany

BIS826 Fireside Oak

BIS827 Traditional Mahogany

BIS828 Cordovan Mahogany

BIS829 Brown Red Mahogany

BIS830 Dark Oak

BIS831 Extra Dark Oak

BIS833 Dark Walnut

BIS836 Extra Dark Walnut

BIS837 Black

BIS881 Pure White

BIS888 Medium Frost

BIS36 Assortment of all 36 Colors

BIS801 Transparent

BIS801A Amber Transparent

BIS802 Natural

BIS803 Natural Light Oak

BIS804 Sandstone

BIS806 Honey Maple

BIS807 Natural Red Oak

BIS808 Light Pine

BIS809 Light Oak

BIS810 Red Oak

BIS811 Colonial Maple

BIS812 Fruitwood

BIS813 Heritage Oak

BIS814 Maple

BIS815 Universal Cherry

BIS816 Light Walnut

BIS817 Medium Cherry

BIS818 Venetian Cherry

Color Color

Resin based Burn-In sticks. Excellent

melting and flow out with heat knife

application.

8" stick length

Available in 36 popular colors.

BURN-IN LUBE BY PREMIER ™

ELECTRIC HEAT KNIFE BY PREMIER ™

BURN-IN STICKS -LUBE-KNIFE


Burn-In lube protects the finish from heat

damage. Lube minimizes sanding while

preventing excessive spreading of Burn-In

material. Available in two sizes.

BIL1 1 ounce

BIL 4 4 ounces

25 Watt Burn In knife, UL Listed, 5 1/2 FT Cord

BIK



38



CHINA MARKERS BY SANDFORD

GILT BY PREMIER ™

GRAINING PENS BY PREMIER ™

China markers write on almost

anything including glass. Can be

used for graining, distressing, or

to create a worn look. Follow with

clear top coat.

CM02060 White

CM02089 Black

Cream metallic gilt for accenting

carvings and repair of metallic

finishes. Follow with clear coat

after application.

¼ oz. jar

GILT AG Antique Gold

GLIT BG Brite Gold

GILT C Copper

GILT S Silver

Fine pointed synthetic

tipped pen. Use to

apply fine line grain

where needed. Also

used for minor scratch

cover. Four colors

available.

GPMBR Medium Brown

GPDBR Dark Brown

GPBLCK Black

GPOAK Oak



39



TOUCH UP MARKERSGUARDSMAN ™

Inexpensive, practical marker set.

Contains three markers-Light, Medium,

and Dark Brown. Great for worn edges

and hiding scratches. Excellent for

delivery personnel.

MP3

TACK CLOTH BY 3M

TACK CLOTH

Use to remove dust, dirt, lint, and other particles

prior to applying first coat of finish or sealer.

Size 17" x 36"

Single ply/1 Per pkg.

TACKCL



40



TOUCH UP MARKERSPREMIER ™

Capillary style marker that stays wet for the longest

run. Excellent flow rate. Durable long lasting tip.

Fade resistant even after top coat is applied.

Stain and finish in one marker.

HAPS Compliant.

Available in 24 Colors.

CM702* Natural

CM706* Honey Maple

CM708* Light Pine

CM709* Light Oak

CM711* Colonial Maple

CM712 Fruitwood

CM713* Heritage Oak

CM714 Maple

CM715* Universal Cherry

CM716* Light Walnut

CM724* Brown Cherry

CM725 Lt. Red Mahogany

CM727* Traditional Mahogany

CM728* Cordovan Mahogany

CM729 Brown Red Mahogany

CM730* Dark Oak

CM731 Extra Dark Oak

CM732 Medium Dark Walnut

CM733* Dark Walnut

CM734 Dark Pecan

CM735* Tavern Pine

CM736 Extra Dark Walnut

CM737* Black

CM791 Forest Green

CM700-15* 15 Piece Assortment (*)

CM700-24 24 Piece Assortment (All Colors)

Color Color



41



TOUCH UP MARKERSVALVE ACTION BY PREMIER ™

Pump action valve marker. Used to repair scratches and worn edges

with ease. Valve action enables user to control flow out. Fade

resistant and even application. Color stays the same with application

of top coat. HAPS Compliant.

Available in 32 colors.

Color Color

VM229 Brown Red Mahogany

VM230 Dark Oak*

VM231 Extra Dark Oak

VM233 Dark Walnut*

VM234 Dark Pecan

VM237 Black*

VM272 Natural Opaque

VM273 Fontana Opaque

VM274 Light Tan Opaque

VM281 Pure White*

VM283 Light Almond*

VM285 Pearl White

VM289 Pickle Frost

VM290 Meadow Green

VM291 Forest Green

VM15 15 Set Popular Colors (*)

VM32 32 Entire Collection Set

VM202 Natural*

VM208 Light Pine*

VM209 Light Oak*

VM210 Red Oak

VM211 Colonial Maple*

VM212 Fruitwood

VM213 Heritage Oak*

VM215 Universal Cherry*

VM216 Light Walnut*

VM219 Universal Walnut

VM220 Medium Walnut*

VM221 Oak

VM222 Medium Pecan

VM223 Vintage Oak

VM224 Brown Cherry*

VM225 Light Red Mahogany

VM227 Traditional Mahogany*



42



WAX STICKS/FILL STICKS BY PREMIER ™

WAX STICKS

Formulated for small defects, minor

dents and scratches. Easy to use.

Simply rub stick until scratch is

filled then wipe off excess with rag.

Top coat can be applied for

maximum protection.

HAP’s Free

Available in 50 colors.

WS101 Transparent

WS102 Natural*

WS103 Natural Light Oak

WS104 Sandstone

WS105 Wheat*

WS106 Honey Maple*

WS107 Natural Red Oak

WS108 Light Pine*

WS109 Light Oak*

WS110 Red Oak

WS111 Colonial Maple*

WS112 Fruitwood

WS113 Heritage Oak*

WS114 Maple

WS115 Universal Cherry*

WS116 Light Walnut*

WS117 Medium Cherry

WS118 Venetian Cherry

WS119 Universal Walnut

WS120 Medium Walnut*

WS121 Oak

WS122 Medium Pecan

WS123 Venetian Oak

WS124 Brown Cherry*

WS125 Light Brown Mahogany

WS126 Fireside Oak

WS127 Traditional Mahogany*

WS128 Cordovan Mahogany*

WS129 Brown Red Mahogany

WS130 Dark Oak*

WS131 Extra Dark Oak

WS132 Medium Dark Walnut

WS133 Dark Walnut*

WS134 Dark Pecan

WS135 Tavern Pine*

WS136 Extra Dark Walnut

WS137 Black*

WS181 Pure White*

WS182 Off White

WS183 Light Almond*

WS184 Cream*

WS185 Pearl White*

WS186 Parchment

WS187 Deep Cream*

WS188 Medium Frost

WS189 Pickle Frost*

WS190 Meadow Green

WS191 Forest Green*

WS192 Light Grey

WS193 Medium Grey*

WS-25 25 piece Stick (*) Assortment

WS-50 50 piece entire Color Assortment

Color Color



43


SHOP-REPAIR

4oz. tube

WOOD EPOXY

Used for wood repairs. Tube form. Simply twist

or cut a piece from the tube, knead, and apply.

15 minutes to harden. Can be drilled, sanded,

or finished.

EP1500

LATEX GLOVES

Latex disposable gloves. Used for protection

during removal of old bedding or during deliveries

of light colored furniture. Can also be used in

home service situations.

Extra large/Powdered

50 pairs/Box

LTXGL

BODY FILLER

Use to repair

wood damage,

rebuild crushed

corners, or to fill

in missing wood

pieces.

Hardener

supplied.

Light weight

filler for easy

sanding.

497 Body Filler - Quart

494 Body Filler - Gallon

495W White Hardener 4 oz.

498R Red Hardener 4 oz.

DUST MASK-

PARTICLE MASK

Particle respirator mask with elastic band. Used

during sanding or sweeping.

#N95 Approved

30 Masks/Box

8000



44


SHOP-REPAIR

SILICONE LUBRICANT

3M BRAND

Fast drying lubricant for metal, rubber, and

plastic. Used on drawer glides, hinges, casters,

etc.

Aerosol spray 13.25 oz.

3M85822

STEEL WOOL

GRADE 0000

Use for rubbing down surfaces. Smoothes lacquer

or buffing to high luster.

STS0000 Sleeve 12 Pads/Sleeve

STC0000 12 Sleeves Case

STR0000 5 Lb. Roll Roll

Above: STR0000

Below: STS0000



45


SHOP-REPAIR

ADHESIVES-GLUE2 PART EPOXY 3M BRAND

2 PART EPOXY (PASTE FORM)

PREMIER BRAND®

CA CYANOACRYLATE(SUPER GLUE)

PREMIER BRAND®

WOOD GLUE-

TITE BOND BRAND

Scotch-Weld Epoxy Adhesive. No mess, no

mixing, glue flows through mixing nozzle to insure

proper mix.

Clear color. 3-5 min. work life. Fast cure: 20 mins.

1.7 oz

21789 Applicator

21791 Nozzles

22648 Epoxy Glue

2 Part adhesive. Requires mixing. Part A (resin)

and Part B (hardener) together.

Two 16 oz tubs supplied. 1 each of Part A and B.

Use as general purpose rapid set adhesive.

ABGLUE

CA instant

adhesive

products make

for quick and

lasting repairs.

Super

strength, dries

instantly with

accelerator.

CA1 Thin/Red

CA2 Medium/YellowCA3 Thick/Green

CAA Activator Aerosol

CAAP Activator w/Pump

CAR Remover/Debonder

Excellent interior

yellow woodworking

glue. Use on hard

and soft woods.

Heat resistant,

sands easily, strong

and paintable.

1 Gal. Container

719



46


SHOP-REPAIR

GENERAL PURPOSE

3M BRAND

FOAM SPRAY 3M BRAND

Spray adhesive

bonds upholstery

fabrics and foam.

16.9 oz.

Strong adhesive

used for bonding

metal, plastics, and

wood.

Multi-purpose.

16.75 oz

3M773M74

ADHESIVES-SPRAY



47


SHOP-REPAIR

POLISHING PADS-PLATES

BUFFING PADS

F O A M W O O L

WOOL BUFFING PAD

W/CENTER HOLE

8" Foam polishing pad. Threaded screw on

backing plate attached. Produces swirl-free high-

gloss finish.

1000

7 ½” Wool buffing pad, curved edge w/hole and

1 ½” Pile

11311

9" Wool buffing pad, Curved edge w/hole and

1 ½” Pile

11313



48


SHOP-REPAIR

BUFFING PADS

C O M P O U N D I N G

W/ HOOK AND LOOP

POLISHING

W/ HOOK AND LOOP

FOAM BUFFING PADS

W/HOOK AND LOOP

7 ½” Compounding Pad. Tufted wool.

Mop Head Strands

1 ½” Pile

41125

7 ½” Polishing Pad.

Fuzzy woven wool.

1 ½” Pile

41725

7 ½” Waffle foam pad. Excellent for high gloss

finishes. Swirl free.

41925



49


SHOP-REPAIR

BONNETS-BACKING PLATES

POLISHING BONNETSBACKING PLATE

Bonnet fastens by tying drawstring over backing

plate. 1 ¼” Pile

Best to increase size of bonnet ½” larger than

backing plate to avoid burning edge.

Threaded hook and loop. 7" Backing Plate. Use

with hook and loop pads.

424101

BC70 7"

BC75 7 1/2"

BC80 8"

BC90 9"

Size



50


SHOP-REPAIR

MEDIUM CUT CLEANER

MACHINE GLAZE

BUFFING POLISHESMEGUIAR’S BRAND

POLYMER SEALANT

FINAL INSPECTION

Use when staging furniture for delivery. Use Final

Inspection to wipe finger prints, particles, or to dust

furniture leaving a factory fresh finish.

M3416 16 oz.

M34128 128 oz.

Moderate abrasive cleaner used to remove medium

surface defects. Best results when used with

polisher.

MO116 16 oz.

MO164 64 oz.

Non-abrasive polish used to achieve a deep, high-

gloss finish. Best results when used with polisher.

MO316 16 oz.

MO364 64 oz.

After

compounding

and polishing,

use sealant to

protect finish.

Apply by hand or

with polisher.

M2016 16 oz.



51


BUFFING POLISHESMEGUIAR’S BRAND

SHOP-REPAIR

SHOW CAR GLAZE SWIRL REMOVER

Premum polish will outshine all other hand applied

polishes. Apply by hand or with polisher.

MO716 16 oz.

MO764 64 oz.

Cleaner/Polish is blended to give a deep dark

shine while removing light scratches, swirl marks,

and minor defects. Apply by hand or with

polisher.

MO916 16 oz.

MO9128 128 oz.



52


SHOP-REPAIR

BUFFING COMPOUNDS3M BRAND

FINESSE-IT HEAVY-DUTY RUBBING

C O M P O U N D

Finishing material used to remove mico-fine

scratches. Also removes swirl marks afer

compounding. Leaves a clear, glazed finish.

Use on all high gloss finishes.

5928 32 oz.

13084 Gallon

Aggressive compound. Maintains high rate of cut

with constant pressure. Buffs to high gloss leaving

minimal swirl marks.

5955



53


SHEETING

Economical cloth as used in bedsheets.

White color. Large cut size.

RA1700

SUGAR LINER

100% Cotton.

Excellent for shop and general use.

White color. Large cut pieces.

RA1725

BLUE CLOTH

BALBRIGGIN

New tee shirt material. Large cut pieces.

RA1711

DETAIL CLOTH

Preimum, top of the line rag.

Tee shirt material sewn together, bound and

stitched around edge, producing a quality rag.

Approx. size 18 x 20"

White color.

RA1727

Non-woven blue crumbled cloth.

Lint free, excellent for glass.

Approx. size 19 x 14"

Approx. 500 rags/Box

RA1745

TEE SHIRT

Washed and bleached for softness and absorbancy.

Excellent all-purpose general rag. Great for dusting.

White color. Large cut size.

RA1701

SHOP-REPAIR

R A G S

White color.

BEST SELLER!



54


SHOP-REPAIR

R A G S

CHEESECLOTH/

H E R M I T E X ®

RYMPLE CLOTH

Super soft, highly absorbent cloth. Used for wiping,

staining, and refinishing. Excellent for use on high

gloss finishes.

White color.

100 precut pieces supplied on roll.

18" x 12" 3 ply.

100% Cotton, non abrasive, durable with solvents

RA1748



55


SHOP-REPAIR

SANDING

SANDING BELTS

Resin bond, X Weight, Cotton cloth backing. Aluminum oxide mineral abrasive

SB50321 3 X 21" 50 Grit

SB80321 3 X 21" 80 Grit

SB120321 3 X 21" 120 Grit

SB180321 3 X 21" 180 Grit

SB50648 6 X 48" 50 Grit

SB80648 6 X 48" 80 Grit

SB120648 6 X 48" 120 Grit

SB180648 6 X 48" 180 Grit



56


SHOP-REPAIR

SANDING DISCS W/HOLES

SANDING

5" Hook and loop sanding discs. Aluminum oxide.

60 Disc 5H 5" w/ 5 Hole










5 Vacuum Holes 8 Vacuum Holes













57


SHOP-REPAIR

SANDINGSANDPAPER 3M BRAND

GARNET SANDPAPER

Used for reconditioning wood surface before

finishing. Recommended for removal of

varnish, paint, and lacquer. Sands smooth.

Made with garnert, a natural mineral.

Orange color.

Sheets Per Sleeve

G50D 50

G60D 50

G80A 50

G80D 50

G100A 100

G100C 100

G120A 100

G120C 100

G150A 100

G180A 100

G220A 100

PRODUCTION SANDPAPER

For wood and metal sanding. Open coat with

aluminum oxide mineral.

Brown color.

Sheets Per Sleeve

P60D 50

P80D 50

P100A 100

P100C 100

P120A 100

P120C 100

P180A 100

P220A 100

Grit

Grit



58


TRI-M-ITE FREE CUT SANDPAPER

SHOP-REPAIR

SANDINGSANDPAPER 3M BRAND

Use on white wood or between sealer coats.

Silicon carbide mineral. Glue bonded open coat

with anti-loading Fre-Cut Coating. Stearated.

White/blue color.

T100A

T100C

T120A

T150A

T180A

T220A

T240A

T280AT320A

T400A

T500A

WET OR DRY SANDPAPERUsed to produce a rich, deep, smooth finish.

Silicone carbide mineral. Can be used wet when

adding water and/or detergent to the surface.

Black color.

WD220A

WD240A

WD280A

WD320A

WD360A

WD400A

WD500A

WD600A

WD800A

WD1000A

WD1200A

WD1500A

WD2000A

100 Sheets per Sleeve.Grit

50 Sheets per Sleeve.Grit



59


SHOWROOM & SHOP SUPPLIES

BLADES-BOXCUTTERS

SINGLE EDGE

RAZOR BLADES

BOX CUTTER

100 blades per package

Use for cutting, trimming and scraping. Fits most

single edge scrapers.

9RB

4" length

7/8" height

Metal bodied holder which houses a single edge

blade. Adjustable for depth.

BXCUT



60



KNIVES & REPLACEMENT BLADES

UTILITY KNIVES UTILITY SAFETY KNIVESSTANLEY ™

HEAVY DUTY

UTILITY KNIVES

STANLEY ™

Metal Bodied retractable (multi- position) blade for

safety

K145

Top of the line.

Heavy duty, metal body, retractable

(4 positions) blade for safety.

10099

Heavy duty, metal body, spring loaded, self

retracting blade. Knife is designed so blade can be

exposed only while applying pressure to the

button which prevents the blade from being

exposed when not in use. Best on the Market.

10189



61



KNIVES & REPLACEMENT BLADES

UTILITY SAFETY KNIFE

REPLACEMENT BLADESSTANLEY ™

Heavy duty, Handy wall dispenser

100 blades per dispenser package

11921A Pointed edge

UTILITY KNIFE

REPLACEMENT BLADESSTANLEY ™

11987 Safety Rounded edge

(Recommended for use with 10189)

Heavy duty, Handy wall dispenser

100 blades per dispenser package



62



DUST CLOTH

GUARDSMAN ™

FURNITURE POLISH

GUARDSMAN ™

GLASS CLEANER

3M ™

14’ x 18" Cloth

Specially treated 100% cotton dust cloth. Absorbs

and locks dust.

DC1

12.5 ounce Aerosol Can

16 ounce Cream Concentrate

FP14 12.5 ounce aerosol can (wood scent)

FPC 16 ounce concentrate (wood scent)

19 ounce Aerosol can

Easy to use, quick acting, foaming aerosol,

non-streaking cleaner that is also effective for use

on plastic, chrome, and metal.

03585

Premium polish protects while leaving behind a

brilliant shine. Safe for all wood surfaces.



63


GLASS ITEMS


B U M P O N S

3 M ™

Clear

Self-Adhesive

Excellent to use with glass, cabinet doors, lids and

drawers. Self adhesive backing peel and stick, non

maring, no skid.

Used under glass tops or under accent pieces.

Holds glass in place and protects against surface

scratches.

Use on the back of picture frames to prevent

marring of the wall.

Cushions and keeps glass shelves in place. Can

also be used behind mirrors or behind cabinet

doors.

1212 Clear oval cylindrical,

3/8" diameter, 1/8" height

1213 Clear, Flat topped,

½” diameter 1/8" height

GLASS-DISC SPACER

Discs provide space between surface and glass.

Clear

Plastic

¾” diameter, 1/32" height

1214

Left: 1212, Cylindrical

Right: 1213, Flat Top



64


GLASS ITEMS


Diameter

STEM BUMPERS

¼” Diameter Stem

Plastic

Stem fits into pre-drilled

holes on table bases.

Use as cushioning for

glass tops.

Item 1215 can also be

used under chairs.

1215 Hard Plastic ¾” 1/8"

12509F For Use Under Glass Semi-Soft Plastic ½” 1/8"

12909 For Use Under Glass Semi-Soft Plastic ½” ¼”

Measurement of diameter is the circumference of the bumper,

Height is the thickness of the bumper head, which remains above the stem surface.

Bumper Height

L to R: 1215, 12509F, 12909



65



HOT GLUE SUPPLIES

HOT-MELT GLUE GUN

ARROW BRAND

GLUE STICKS-

ARROW BRAND

Trigger fed electric glue gun. High volume melting

chamber for fast flow and a long lever handle with

clutch to ensure a fast, steady , and even

application. With built in drip tray. Bonds almost

anything within 60 seconds. Used in woodworkingor with leather, canvas, fabrics, cardboards,

plastics and metals.

TR550

10" Length Sticks/Sold in packages of 12

All Purpose Glue Sticks for use with Arrow Hot Melt

Glue Gun.

GS10

JOINING DEVICES

H U G G E R S

Fits two 3/4” End Panels

Inside Dimension 1 1/2"

Bracket eliminates spaces between Wall Units,

Entertainment Centers and Bookcases,.

Huggers join end panels together.

HU150



66



PICTURE HANGERS-WIRE

ADJUSTABLE MIRROR-

PICTURE HANGERS

PICTURE HANGER-

A N C H O R

PICTURE WALL HANGERS

PICTURE-MIRROR WIRE

Wireless adjustable mirror-picture hangers with

nails. Screw adjustment to raise or lower each

side for perfect placement. Solves the

complications involved with leveling issues.

Strength

307 100 lb 12 pieces/box

Loop Anchor

Solid loop Hanger used to secure Mirrors,

Pictures, and Curios to walls.

Hole Height

10 2 hole 1 5/8"

91 1 hole 1 3/8"

708 2 hole 1 7/8"

Twisted Picture Hanger

Twisted metal Picture Hangers include nails.

Carded for easy use or resale.

Strength Quantity

26 30 lb 4 per card/100 pieces/box



3 Different Strengths available

Braided wire, approx. 5 lb. spool. Flexible, easy

to work with.

Strands Maximum Picture Wt.

9214 20 20 lbs.

9216 28 30 lbs.

9218 36 35 lbs.

L to R: 91, 10, 708



67



PICTURE HANGERS-WIREFRICTION SUPPORT

(WING MIRROR)

Use on Tri-View mirrors to support mirror wings.

Allows Tri-panels to be adjusted up to 45 degrees

9112



68


SANDING

SHOP-REPAIR

Used to clean, condition, and finish wood, plastic,

or metal. Fast cutting, leaves a consistent finish.

Use wet or dry.

Long lasting.

SCOTCH BRITE HAND PADS

6 x 9"

20 Pads/Box

3M7445Box Light Duty/Super Fine White

3M7447Box General Purpose Red

3M7448Box Ultra Fine Grey

SCOTCH BRITE ROLLS

4" X 30 ft.

Cut to length for hand use.

3M7445Roll Light Duty/Super Fine White

3M7447Roll General Purpose Red

3M7448Roll Ultra Fine Grey

3M7449Roll Polish White

Can also be used in many straight rubbing machines.



69


TAPE & ACCESSORIES

CLEAR CARTON TAPE

3M Brand ™

2" x 55 yards per roll,clear color.

22 lb. Tension strength

1.9 mill thickness

Film backing with Hot Melt adhesive. Used in both

Commercial and Industrial applications.

Sold in both rolls or cases (36 rolls per case).

3710

Shurtape Brand ™

2" x 110 yards per roll, clear color.


1.8 mill thickness

Solvent based acrylic adhesive

Excellent holding strength, premium grade

Sold in both rolls or cases (36 rolls per case).

PP8110



70


TAPE & ACCESSORIES

DEFECT HIGHLIGHTING

T A P E

DOUBLE FOAM FACE

T A P E

¼” X 60 yards per roll.

Fluorescent red.

30 lb. tension strength.

6.5 mill thickness

Sticks to items without harming finishes. Printable.

Moderate tack. Multiple uses. Great for highlighting

defects after uncartoning. Another helpful hint:

delivery personnel can use to indicate reasons for

customer refusal.

DT025

1” x 108 feet per roll

Off White color

Acrylic adhesive

1/16" Thickness

Great for installing mirrors to back panels.

Excellent adhesion strength.

4016

Fluorescent red color



71


TAPE & ACCESSORIES

CP66 SERIES

SHURTAPE BRAND®

Professional GradeBeige color/crepe paper

60 yard length per roll

¾’ 1" & 2" widths available

5.9 Mill


This product removes cleanly leaving no messy

residue behind, recommended for use in Repair

shop applications. Sold in both rolls and cases .

CP83 SERIES

SHURTAPE BRAND ®

Utility GradeBeige color / crepe paper

60 yard length per roll

½” ¾” 1" & 2" widths available

5.5 Mill Thickness

20 lb. Tension Strength

Use for non-critical applications such as packaging:

not designed for paint applications. Sold in both

rolls and cases

MASKING TAPES

Width Rolls per case

CP8350 1/2" 72

CP8375 3/4" 48

CP831 1" 36

CP832 2" 24

Width Rolls per case

CP6675 3/4" 48

CP661 1" 36

CP662 2" 24



72


TAPE & ACCESSORIES

MASKING TAPE W/FILM

3M BRAND ™

STRAPPING

(FILAMENT) TAPE

SHURTAPE BRAND ™

Pre-taped plastic Drop Cloth

Safe-release

Painters Blue Masking tape

Clear 24" Plastic Film (attached)

24 “ x 30 yard rolls

Saves time, provides protection allowing

professional paint lines, Great protection from over

sprays, brush slips during touch-ups and repairs,

etc. Dispenser has perforated edge for easy clean

cutting.

Refill rolls sold separately.

MFDC Reusable Hand Dispenser with

masking tape w/film

MFR Refill masking tape with film only

Industrial Grade

Fiberglass Reinforced

Hot Melt Synthetic rubber adhesive

Off White

60 yard lengths

Available in ¾” or 1" widths

5.4 Mill Thickness

Whether you’re sealing cartons or securing

merchandise this tapes’ high adhesion and sheer

strength keeps your packages protected in any

environment esp. when you need a reliable secure

seal. Sold in rolls or cases

Width Rolls per Case

GS50175 3/4" 48

GS5011 1" 36

24” Plastic drop down



73


TAPE DISPENSERS

TAPE & ACCESSORIES

3M BRAND ™ METAL TAPE

DISPENSER

Use with filament or masking tape.

Accommodates widths up to 1"

SD999

Box sealing tape dispenser

Lightweight, roll-on pistol grip dispenser.

Easy to load, adjustable tape brake allowing control

of tension and precise delivery.

Durable, high impact plastic and metal

construction. Use with clear sealing tapes.

3MH180



74


T O O L S

A P E X

Apex items are known for their durability. Each item is precision machined from the finest steels and heat

treated to achieve a long lasting tool life.

APEX PHILLIP’S

DRIVER BITS

¼” Hex Drive Phillip’s Bit

Point Size Length

440-1 1 1"

440-2 2 1"

440-3 3 1"

491 1 2"

492 2 2"

493 3 2"

491A 1 2 3/4"

492A 2 2 3/4"

493A 3 2 3/4"

491B 1 3 1/2"

492B 2 3 1/2"

493B 3 3 1/2"

491C 1 6"

492C 2 6"

493C 3 6"

APEX ACR

DRIVER BITS

¼” Hex Drive Phillip’s Bit

ACR Bits have wing faced ribs on the pointed tip

to lock into the screw recess helping to reduce

slippage.

Point Size Length

440-1-ACR1 1 1"

440-2-ACR2 2 1"

440-3-ACR3 3 1"

491-ACR1 1 2"

492-ACR2 2 2"

493-ACR3 3 2"



75


A P E X

T O O L S

SLOTTED DRIVER BITS SLOTTED DRIVER BIT

WITH FINDER SLEEVES

¼” Hex Drive Slotted/Blade Bit.

Finder sleeve makes it easy to engage slotted

fasteners by simply gliding the bit.445-1 4-5 1" .034

445-2 6-8 1" .40

445-3 8-10 1" .42

445-4 10-12 1" .46

445-5 12-14 1 1/2" .50

445-6 14-16 1 1/2" .55

320-0 3-4 2" .30

320-1 4-5 2" .34

320-2 5-6 2" .36

320-3 6-8 2" .38

320-4 8-10 2" .42

320-5 10-12 2" .46

320-6 12-14 2" .50

326-3 6-8 2 3/4" .38

326-4 8-10 2 3/4" .42

326-5 10-12 2 3/4" .46

Fits

Screw

Size LengthBlade

Thickness

L320 5-6 3 3/4" .36

M320 6-8 3 3/4" .38

P320 8-10 3 3/4" .42

R320 10-12 3 3/4" .46

Fits

Screw

Size LengthBlade

Thickness

1/4 “ Hex Drive Slotted/Blade Bit



76


METRIC SOCKET HEAD

DRIVER BIT(HEX FOR ALLEN-TYPE

SCREWS)

A P E X

T O O L S

¼” Hex Drive Metric Socket Head Bit

SOCKET HEAD BIT(HEX FOR ALLEN-

TYPE SCREWS)

¼” Hex Drive SAE Socket Head Bit

AM-3MM 3 2"

AM-4MM 4 2"

AM-5MM 5 2"

AM-5MM-6 5 6"

AM-6MM 6 2"

AM-6MM-6 6 6"

AM-7MM 7 2"

AM-8MM 8 2"

AM-10MM 10 2"

Hex

Size LengthHex Size Length

185-3 5/32" 1 5/16"

184-4 3/16" 1 5/16"

AM06 3/16" 2"



77


A P E X

T O O L S

SQUARE DRIVER BIT TORX DRIVER BIT

¼” Hex Drive Square Bit ¼” Hex Drive Torx Hex Bit

950-0 0 1"

950-1 1 1"

950-2 2 1"

950-3 3 1"

954-1 1 2"

954-2 2 2"

954-3 3 2"

954-A-1 1 2 3/4"

954-A-2 2 2 3/4"

954-A-3 3 2 3/4"

954-B-1 1 3 1/2"

954-B-2 2 3 1/2"

954-B-3 3 3 1/2"

954-C-1 1 6"

954-C-2 2 6"

954-C-3 3 6"

Point

Size LengthDriver

Size Length

440-TX-15 T-15 1"

440-TX-25 T-25 1"

440-TX-27 T-27 1"

440-TX-30 T-30 1"



78


A P E X

T O O L S

HAND DRIVER

(MAGNETIC)

Stubby Magnetic Hand Driver accepts all ¼”

Hex Drive Bits. Overall length is 2 3/8"

(excludes bit size).

M-1505-P

Hand held driver. Seven driver bits stored in handle

(Phillips, Slotted and Square). Magnetic bit holder.

Overall length 8 1/2" (excludes bit size).

M-15-SC

HAND HELP SCREW DRIVER

ADAPTERS FOR SOCKET

W R E N C H

Square Drive (Female) Adapter to 1/4” Hex

Use to convert socket Wrenches to Offset Driver.

Female end joined with Socket Wrench, opposite

end holds ¼” bit securely.

825 ¼” 1"

838 3/8" 1 1/2"

Sqaure

Female

Size Length

EXTENSIONS / HEX DRIVE

TO SQUARE DRIVE

(TO DRIVE SOCKETS)

¼” Hex Drive to Square Drove Extensions

Use for driving Sockets. ¼” Hex Drive end

secured in Drill Chuck while square male end

fits into socket. Use with a bit holder for

extension.

EX250B ¼” 1 3/8"

EX250B-3 ¼” 3"

EX370B 3/8" 1 5/8"

EX370B-3 3/8" 3"

Sqaure

Male

Size

Length



79


MAGNETIC BIT

H O L D E R S

Accepts all 1/4” Drive Bits

Size

M-490 3"

M490-6 6"

QR-M-490-A 3" w/ Quick Release

A P E X

T O O L S

Above: M-490

Above: QR-M-490-A

1/4” Hex Drive Magnetic Bit Holder

MAGNETIC HEX

HEAD DRIVER/

NUTSETTER

1/4” Hex Drive to 6 point Hex opening.

Use to drive (or fasten) Hex-Head Fastners includ-

ing Hex Tap Bolts or Hex Lag Screws.

NUTSETTER W/ 1 3/8” BOLT CLEARANCE

M6N-0814-2 2" 7/16" ¼” Hex Tap Bolts

M6N-0816-2 2" ½” 5/16" Hex Tap Bolts M6N-0818-2 2" 9/16" 3/8" Hex Tap Bolts

Length

Hex

Size

Opening Fastens

6B-0814 3 ¼” 7/16" ¼” Hex Nuts

6B-0816 3 ¼” ½” 5/16" Hex Nuts

6B-0818 3 ¼” 9/16" 3/8" Hex Nuts

Length

Hex

Size

Opening Fastens

1/4” Hex Drive to 6 point Hex opening.

Bolt clearance Nutsetters allow bolt to recess into

Nutsetter body as nut is driven down.



80


T O O L S

BRAD NAILER B R A D S

Porter Cable Brand

Brad Nailer uses 18 Gauge Brads from ¾” to 2"

Pneumatic. Excellent for Trim Work, Moldings,

etc.

PCBN200

Porter Cable Brand

Brads are 18 Gauge. 5000 Brads per box

available in 6 different lengths.

Length

4424 3/4”

4432 1"

4440 1 1/4"

4441 1 1/2"

4442 1 3/4"

4443 2"



81


T O O L S

DRILL BIT SET(DEWALT)

S K E W D R I V E R

17 Piece Drill Bit Set. Durable pouch for storage

included. High speed steel made in the USA Drill

bits.

Kit includes following sizes at quantities

1/16" 2

5/64" 2

3/32" 1

7/64" 2

1/8" 1

9/64" 1

5/32" 1

11/64" 1

3/16" 1

7/32" 1

¼” 1

5/16" 1

3/8" 1

½” 1

Quantity

DW1181

Bevel gear driven offset driver. Excellent for those

hard to reach areas including: removing case tops,

mechanisms, and centerdrawer glides. Magnet

Head can be removed from handle and placed in

Cordless Drills. Stabilizer wing provided for better

grip. Removable handle has compartment for Bit

Drivers. Accepts ¼” hex Drive Bits. 4 bits included.

SKEWDRIVER



82


T O O L S

STAPLERS

DUO-FAST ELECTRIC

STAPLER

Electric stapler-excellent tool for upholstery and

light wood assembly. Great for in home service and

shops. Uses 3100 series staples.

EIC3118

DUO-FAST AIR STAPLER

Pneumatic, use for upholstery or light

woodworking, lightweight with rubber comfort

grip for easy handling. Use 3100 series staples.

AIR3118

DUO-FAST BRANDARROW BRAND

All purpose heavy duty staple gun tacker. Easy

squeeze, double leverage mechanism. Uses T50

series staples

HAND HELD STAPLER

T50



83


T O O L S

STAPLES

STAPLES - 3300 SERIES

3100 SERIES STAPLES-

DUO-FAST BRAND

3100 Series staples use with 3100 series staples.

3108 1/4" 13,380

3112 3/8" 16,700

3116 1/2" 13,360

3118 9/16" 13,360

Size Quantity

T50 SERIES STAPLES-

ARROW BRAND

3/8" Crown

.050 Wire size

5000 per box

T5038 3/8" Staples

T5012 1/2" Staples

For discontinued 3300 Stapler

3308 1/4" 5,000

3312 3/8" 5,000

3316 1/2" 5,000

3318 9/16" 5,000

Size Quantity



84


T O O L S

STAPLE REMOVERS

ANGLED STAPLE

R E M O V E R

STRAIGHT STAPLE

R E M O V E R

Easily removes staples. Top grade hardened steel.

Sharp points to dig in and pry staple. Lifter curved

at correct angel for staple removal.

4 Oz.

U1205

Straight staple lifter with wooden handle, sharp

pointed tempered steel.

U124



85


CALL FOR INFORMATION ON

POWER TOOLS SUCH AS

POLISHERS, DRILLS, ANGLE

DRILLS, SANDERS, NAILERS, ETC.

T O O L S



86


UPHOLSTERY SUPPLIESCARDBOARD STRIPS

Use for blind tacking. Creates

a nice straight seam. Use for

skirts, outside backs, and

arms.

Cardboard strips are excellent

for service vans-lays flat, no

unraveling.

U303 ½” Hard Cardboard Roll Approx. 575 ft.

U304 ½” Soft Cardboard Roll Approx. 450 ft.

U305 ½” Soft Cardboard Strips 38" Cut Strips,

350 Strips/Box

CLEANING GUN

(FOR UPHOLSTERY)

Spot cleaning upholstery/textile cleaning gun.

Pumps a powerful spray of cleaning fluid which

quickly aids the removal of grease, oil, makeup,

and ink stains. Will clean delicate silks ,

polyesters, wools and tightly woven fabrics.

Simply adjust the variable spray nozzle to

achieve desired pressure and spray pattern.

Electric/110 Volt

For use with non-flammable cleaning solvents

only. SK1 Upholstery Cleaner Reccommended.

SP3000

L to R: U303,U305,U304



87


UPHOLSTERY SUPPLIES

C A M B R I C

(DUST COVER)

2" Webbing used to increase firmness in seating.

Weave webbing between springs, pull tight, staple,

or nail to frame.

ELASTIC WEBBING

(FOR UPHOLSTERY)

UEW200-164 164 ft. roll

Non-woven material.

1.25 oz per square yard

Black

100 yd. Rolls

U309B 42" Width

U336 36" Width

*Other sizes, colors, available upon

request.

UEW200-328 328 ft. roll



88


UPHOLSTERY SUPPLIESFLEX GRIP

Heavy duty, 3 prong, flexible metal tacking strip.

Eliminates hand sewing of blind stitching on

curves. Use on rolled arms, etc.

U302 100ft/Roll

HOG RINGS

Polished ¾” rings with sharp points. Use for

attaching springs and edge wire together.

1442

HOG RING PLIERS

Designed specifically for closing hog rings.

Straight vinyl covered handles

6 ¾” Long

1440-O Open Pliers-Handles remain apart

until used

1440-C Closed Pliers- Handles together until

used

Shown both open and closed

Top: 1440-O Bottom: 1440-C



89


UPHOLSTERY SUPPLIESJIFFY STEAMERS

Portable hand held steamer. Great for outside

service calls or quick fix inside work, Up to three

times more power than other portable steamers. 8oz. water reservoir for over 15 minutes of steam

per filling. 120 volt 600 watts, 9’ power cord.

J10

Excellent steamer for removing wrinkles from

fabrics. Quick heat up time, rolls on casters.

1 gallon water reservoir, no spill check valve cap.

5 1/2" hose with metal hose holder stand 1300

watts.

J2

Most powerful commercial model, water is self

contained. Aluminum housing unit features water

level sight gauge. Preheat steam settings. 5 1/2"

hose with metal hose holder stand.

J4000

JIFFY CLEANING LIQUID

Our unique Liquid Cleaner removes hard water

deposits from steamers. It’s easy to use and works

on all Steamer models. 10 oz. container

J11

J10 J4000

J2



90


UPHOLSTERY SUPPLIESNAILS

Multiple purpose nails can be used to secure spring clips and for general purpose applications. Available in

1 pound boxes.

UN018 Spiral 14 Gauge 7/8" Length

UN019 Ringed Shank 1" Length

Ringed Shank

Spiral



91


UPHOLSTERY SUPPLIES

NEEDLE KITSCURVED NEEDLES

ROUND POINT

Contains 4 curved needles, round points.

Consists of 1 each:

3" 18 Gauge

4" 17 Gauge

5" 16 Gauge

6" 15 Gauge

K3

CURVED NEEDLES

SQUARE POINT

Contains 4 curved needles, 3 square point.

LONG STRAIGHT NEEDLES

Heavy duty, round point, long straight needle kit

Consists of 1 each:

6" 14 Gauge

8" 14 Gauge

10" 13 Gauge

12" 12 Gauge

K5

LIGHT WEIGHT

CURVED NEEDLES

Curved round points.

Consists of 1 each:

3" 18 Gauge

4" 17 Gauge

5" 16 Gauge

6" 15 Gauge

K4

Consists of 1 each:

2 ½” 20 Gauge

3" 19 Gauge

3 ½” 18 Gauge

4" 18 Gauge

K7



92


UPHOLSTERY SUPPLIESTACK STRIPS-METAL TUFTING NEEDLE/

CLASPS

Tufting needle fastens buttons, saves time. No

need to remove the outside back of a piece being

tufted.

To use: After threading button, load end of needle

with clasps. As needle reaches maximum depth,

clasp is released

417 Tufting Needle

418 Clasps (For use with 417 needle)

Provides a smooth straight edge for attaching fabric

to frame. Metal strip has soft rounded edges.

Gentle on your most delicate fabrics.

30" length with 8 ounce tack.

100 pieces per carton.

U301-100



93


UPHOLSTERY SUPPLIESSHEARS

WISS BRAND

Upholstery bent trimmers, professional quality.

Inland polished blades, black handles.

20 10" 4 ¾” 12 oz.

22 12" 6 1/8" 18 oz.

Length

of

Cut

Overall

LengthWeight

SOFT EDGE

Plastic sleeve into which metal tack strip slides into.

Which provides added protection against tearing.

U300-250 250 Ft./Spool

U300-500 500 Ft./Spool

TWIST PIN

Twist pins are used to secure arm couch covers or

fabric samples to furniture.

Sold in boxes of 250 pieces

TWPN

Shown with U301-100 metal tack strip inside of

soft edge.



94


UPHOLSTERY SUPPLIES

Use to attach springs to frame. Can be secured with nails, screws or staples. All clips are paper lined to

prevent squeaking. Sold 100 per box.

SPRING CLIPS

SPRING CLIP PLIERS

Special pliers for three prong edge wire clips

U0026

Above: UEK070

Above: UHDS004

Above: UM006

Above: URJS072

Above: UK005

Above: U0025

For use with U0026 Spring Clip Pliers

(Pictured to the right)



95


UPHOLSTERY SUPPLIESWRINKLE REMOVER

Great way to remove wrinkles without ironing or

steaming. Works great on all natural fibers (cotton,

linen, wool and many synthetics such as spun

rayon) Sold in quarts with trigger sprayer and

gallons for refills.

Size

SMQ Quart

SMG Gallon



96


UPHOLSTERY CLEANERS

UPHOLSTERY SUPPLIES

BLOOD REMOVER

INK REMOVER

LEATHER CLEANER &

CONDITIONER

SPOT REMOVER

Highly concentrated non-flammable formula.

Removes blood stains from all materials. In

addition the product removes food and perspiration

stains. Safe on all colors and fabrics. Flush with

water or steam.

16 oz.

4043

Powerful liquid solvent blend in an aerosol can.

Removes oil, grease, dirt, and stains from

upholstery and textiles.

12 oz. Aerosol

830

Powerful aerosol spray that dissolves all types of

ink stains. The remover’s foaming action breaks

the bond between stain and fabric which does not

contain chlorinated solvents. Flush with liquid

cleaner solvent.

13 oz. Aerosol

4045

Contains a unique formula designed to clean dirt,

grime, and smears from leather. Revitalizes and

moisturizes to keep leather soft and supple.

Restores luster.

6 oz. Mousse

LC6



97


U P H O L S T E R Y

CLEANER FLUID

UPHOLSTERY CLEANERS

UPHOLSTERY SUPPLIES

VINYL CLEANER &

CONDITIONER

Industrial spot/stain remover. Effectively removes

oil, grease, dirt, pencil, and other various oil-based

stains without damaging fabric.

Does not leave a ring around stain after use.

Nonflammable, fast evaporation rate.

Reccommended for use with SP3000 Cleaning

Gun.

1 Gallon

SK1

Cleans, penetrates, and restores vinyl

leaving a natural sheen.

16 oz.

M4016

Documents

BED HARDWARE/SLATS - Bruce Bochenek Salesbrucebocheneksales.com/catalog.pdf · Bruce Bochenek Sales BED HARDWARE/SLATS BED SLATS 65-NT Upward Hooks 68-NT Downward Hooks BED HOOK ADAPTERSMODIFICATION