1

BATTERY CHARGERS

CHARGERS

EMROL - Industrieweg 15 - B-2390 Malle - Belgium - T +32(0)3/309.24.24 - F +32(0)3/311.79.50 - info@emrol.com - www.emrol.com

When you think of batteries, you probably think of battery chargers too. A good battery charger because, to a large extent, the performance and life of your battery depend on it. And you probably have other requirements you want to set. Does it have to be light and compact? Or waterproof? A charger for onboard installation? Suitable for use worldwide on all mains voltages?

Rest assured, we have them all!

Safe, reliable and high-quality products

Very diverse and complete range

Modern and user friendly

All our chargers are Automatic: when the battery is fully charged they shut off Ahtomatically or switch to trickle charge mode

All chargers are approved and protected against short circuit and inversed polarity connection. Certificates are available on simple request or on our website

BATTERY CHARGERS

SMALL BATTERY CHARGERS AND CHARGERS FOR ALL INDUSTRIAL APPLICATIONS

2

BATTERY CHARGERS

CompatibilityThe importance of the compatibility of the charger with the battery should not be underestimated. With more than 20 years’ experience in this field, you can be sure that we guarantee an optimal interplay between the battery and the charger.

Selecting the right charger for your applications depends on the answers to a number of questions. You may find it helpful to use the following graph as a guide:

Small circle = charger for a small capacity battery Large circle = charger for a large capacity battery

Blue= conventionalRed = high-frequent

AN OVERVIEW OF THE AVAILABLE PRODUCT FAMILIES

Applications Cleaning Intralogistics AWP Golf Mobility Ahtomotive Horticulture Electrical vehicles Traffic signs Recreational vehicles Marine Research & Development

PRICE

POWER CLASS VERSUS PRICE AND TECHNOLOGY

10

8

6

4

2

00 2 4 6 8 10

TECHNOLOGY

MGX

AMPEEL

PRICE

POWER CLASS VERSUS PRICE AND TECHNOLOGY10

8

6

4

2

00 2 4 6 8 10

TECHNOLOGY

POWERFINN

PSW

CTEK

MEC

IP

3

An overview of the available product families:Depending upon the nominal voltage, capacity and your specific requirements, the table can be used to choose the most suitable product family. Of course, our product specialists are on hand to help you meet every challenge, whether technological or in the budgetary sense.

CHARGERS

All our chargers are 50 Hz or 60 Hz.Batterytechnology:

K = TraditionalO = Maintenance-free

Our range comprises 3 configurations:OK = Unregulated classicGK = Regulated classicHF = High-frequent

You can learn more on the last page.

REMARKS:1 = Economical2 = Display/indication3 = With memory4 = Acid circulation possible5 = No adjustments to mains voltage necessary (calibration)6 = Compact high-frequent chargers7 = Compact conventional charger with fan8 = With a maintenance charge9 = IP66 protection (waterproof)10 = Suitable for onboard installation11 = Multicurve charger (different charging profiles)

T Max Bat Tech

Topo-logie Opm. U Start

V/cel

Min-Max Ah/5h Page

12V 24V 36V 48V 80V

Mori

EL 12h K OK 1 1.5 55-75 / / / / 4

MGX 13h K GK 3, 5, 7, 8, 11 0.3 50-480 50-480 100-300 100-240 /5

13h O GK 3, 5, 7, 8, 11 0.3 30-400 30-400 70-250 70-200 /

PSW

13h K HF 3, 4, 5, 6, 8, 10, 11 1 30-300 30-1400 80-1440 60-1440 300-960

1011h K HF 3, 4, 5, 6, 8, 10, 11 1 30-250 30-1200 80-1200 60-1200 300-8008h K HF 3, 4, 5, 6, 8, 10, 11 1 30-150 30-720 80-720 60-720 300-48011h O HF 3, 4, 5, 6, 8, 10, 11 1 30-250 30-1200 80-1200 60-1200 300-800

MTA 12h K OK 1, 8 1.6 / 150-900 150-750 150-600 150-375 6MTA T 12h K OK 1, 8 1.6 / 200-1050 200-1050 200-1050 200-900 7

CTEK13h O HF 5, 6, 8, 10 6VTOT 4-250 70-140 / / /

820h O HF 5, 6, 8, 10 6VTOT 4-375 70-210 / / /

MEC15h O HF 1, 5, 6, 8 1.2 5.6-250 8.8-150 8.8-18.4 / /

912h O HF 1, 5, 6, 8 1.2 5.6-192 8.8-115 8.8-14.4 / /

IP12h O HF 1, 5, 6, 8, 9, 10, 11

1120-200 120-200 120-200 120-200 /

1312h K HF 1, 5, 6, 8, 9, 10, 11 120-200 120-200 120-200 120-200 /

Powerfinn PAC

9h K HF 5, 6, 8, 10, 11 1.4 132-1120 79-715 30-510 40-335 104-185

14

12h K HF 5, 6, 8, 10, 11 1.4 100-1655 100-1050 95-750 60-480 95-28015h K HF 5, 6, 8, 10, 11 1.4 168-2800 100-1780 75-1260 55-672 140-4209h O HF 5, 6, 8, 10, 11 0 35-110 35-110 / / 60-16012h O HF 5, 6, 8, 10, 11 0 50-1387 40-1050 35-750 40-480 160-30015h O HF 5, 6, 8, 10, 11 0 160-2800 160-1780 280-1260 125-672 300-340

4

MORI

Thanks to technological development, Mori products are consistently at the cutting edge of battery charger technology. You benefit directly from the higher reliability and efficiency that this technology delivers. With a traditional Mori battery charger you also benefit from an exceptionally good warranty.

BATTERY CHARGERS

Quality and safety firstSince 1985, the Mori family has specialized in the manufacturing of high-quality battery chargers. In 1994, this was recognized by the award of ISO 9002 quality certification. Almost all parts are produced under the same roof, ranging from the machine-folding of the casings and the winding of the transformers to the assembly of the chargers into a finished product. This ensures the highest level of quality control.

Mori – specialized in the development and production of both conventional and high-frequent chargers, from large to small.

Service friendlyThe chargers in the MDA, MGX, PSW and Extreme family have a memory which registers the most important parameters of the last 22 charging cycles. This includes the number of cycles, the voltage and current at the beginning and at the end of the charge, capacity and an error and stop code.

As all the answers are stored in the memory of the charger, you never have to ask questions about the machine’s history to the customer. Even when the mains voltage breaks down at night, or the client disconnects the machine while charging, you won’t miss a single significant detail!

SPECIFICATIONS CONVENTIONAL CHARGERS

EL EASY LOGIC

ChargerVoltage

(V)

Charging Current

(a)Box

Weight

(Kg)

CapaCity

(KW)

Flooded 12h

min Ah/5h max 100% Ah/5h max 80% Ah/5h

EL1210 12 10 50 60 75

Box length Width height

EL 240 110 150

■ Only suitable for flooded batteries ■ Monophase chargers 230VAC

R Stock product

5

CHARGERS

MORISPECIFICATIONS CONVENTIONAL CHARGERS

MGX MICRO GOLF X

ChargerVoltage

(V)

Charging Current

(a)Box

Weight

(Kg)

CapaCity

(KW)

Flooded 13h Sealed 13h

min Ah/5h max Ah/5h min Ah/5h max Ah/5h

MGX1205

12

5 A 4,8 0,1 50 60 30 50

MGX1207 7 A 5,1 0,15 70 90 60 70

MGX1210 10 A 5,6 0,19 100 120 80 100

MGX1215 15 A 6,2 0,29 130 180 110 150

MGX1220 20 A 10,6 0,38 190 240 160 200

MGX1225 25 B 12 0,48 250 300 210 250

MGX1230 30 B 12 0,57 310 360 260 300

MGX1240 40 B 13,5 0,76 370 480 310 400

MGX2405

24

5 A 4,5 0,18 50 60 30 50

MGX2407 7 A 5,2 0,27 70 90 60 70

MGX2410 10 A 7,4 0,36 100 120 80 100

MGX2415 15 A 9,1 0,54 130 180 110 150

MGX2420 20 A 12 0,72 190 240 160 200

MGX2425 25 B 13,8 0,9 250 300 210 250

MGX2430 30 B 18,5 1,1 310 360 260 300

MGX2440 40 B 21 1,5 370 480 310 400

MGX3610

36

10 A 12 0,53 100 120 70 100

MGX3615 15 B 14,5 0,81 130 180 110 150

MGX3620 20 B 15,8 1,1 190 240 160 200

MGX3625 25 B 18,6 1,4 250 300 210 250

MGX481548

15 B 19,5 1,1 130 180 110 150

MGX4820 20 B 21 1,5 190 240 160 200

Box length Width height

A 305 160 127

B 385 200 147

■ Monophase chargers 230VAC

■ Automatic compensation of line voltage fluctuations, so no calibration required ■ Features a maintenance charge function ■ Simple operation without a switch ■ Suitable for flooded and maintenance-free batteries ■ Service memory with information on last 22 cycles ■ Reliable and robust charger with a traditional transformer ■ No inversed polarity protection ■ MULTIPROGRAMMER TOPII (MPTOPII) is available for MGX charger

MULTIPROGRAMMER TOPII (MPTOPII)

The MULTIPROGRAMMER TOPII (MPTOPII) allows you to program and display Mori’s most recent products (such as MGX, PSW and EX). There are several pre-programmed charging curves, for example for maintenance free batteries, different charging times, etc.

The MPTOPII moreover has a long memory that makes it possible to stock up to 100 charge memories so that you can subsequently transfer them to a PC via an USB port. It comes complete with a strong carrying case with enough room for the included cables and the software for displaying the data on a PC. No external battery or power supply is required. The unit’s internal battery is charged via the USB cable.

R Stock product

R

R

R

R

R

R

R

R

R

R

R

R

R

R

6

BATTERY CHARGERS

MORI

MTA MICROTECH A

ChargerVoltage

(V)

Charging Current

(a)Box

Weight

(Kg)

CapaCity

(KW)

Flooded 12h

min Ah/5h max 100% Ah/5h max 80% Ah/5h

MTA2430M

24

30 H 19 1 150 180 220

MTA2440M 40 H 21 1,35 200 240 300

MTA2450M 50 H 26 1,7 250 300 375

MTA2460M 60 H 27 2 310 360 450

MTA2480M 80 G 38 2,7 400 480 600

MTA24100M 100 G 41 3,4 500 600 750

MTA24120M 120 G 44 4 600 720 900

MTA3630M

36

30 H 26 1,5 150 180 220

MTA3640M 40 H 30 2 200 240 300

MTA3650M 50 H 39 2,5 250 300 375

MTA3660M 60 G 41 3 310 360 450

MTA3680M 80 G 43 4 400 480 600

MTA36100M 100 G 46 5 500 600 750

MTA4830M

48

30 H 34 2 150 180 220

MTA4840M 40 G 38 2,7 200 240 300

MTA4850M 50 G 40 3,4 250 300 375

MTA4860M 60 G 42 4 310 360 450

MTA4880M 80 G 47 5,4 400 480 600

MTA7230M

72

30 G 39 3 150 180 220

MTA7240M 40 G 42 4 200 240 300

MTA7250M 50 G 46 5 250 300 375

MTA8030M

80

30 G 40 3,3 150 180 220

MTA8040M 40 G 43 4,5 200 240 300

MTA8050M 50 G 47 5,6 250 300 375

SPECIFICATIONS CONVENTIONAL CHARGERS

Box length Width height

H 410 277 285

G 580 363 440

■ Only suitable for flooded batteries ■ Monophase chargers 230VAC

■ Maintenance charge function included as a standard ■ Wall mounting possible

R Stock product

R

R

R

R

R

R

R

R

R

R

7

CHARGERS

MORI

MTA T MICROTECH A T

ChargerVoltage

(V)

Charging Current

(a)Box

Weight

(Kg)

CapaCity

(KW)

Flooded 12h

min Ah/5h max 100% Ah/5h max 80% Ah/5h

MTA2440T

24

40 G 44 1,5 200 240 300

MTA2450T 50 G 46 1,8 250 300 375

MTA2460T 60 G 48 2,2 310 360 450

MTA2480T 80 G 50 2,9 400 480 600

MTA24100T 100 G 52 3,6 500 600 750

MTA24120T 120 G 55 4,3 600 720 900

MTA24140T 140 O 65 5 720 840 1050

MTA3640T

36

40 G 48 2,2 200 240 300

MTA3650T 50 G 50 2,7 250 300 375

MTA3660T 60 G 51 3,2 310 360 450

MTA3680T 80 G 54 4,3 400 480 600

MTA36100T 100 G 58 5,4 500 600 750

MTA36120T 120 G 61 6,5 600 720 900

MTA36140T 140 O 71 7,5 720 840 1050

MTA4840T

48

40 G 50 2,9 200 240 300

MTA4850T 50 G 52 3,6 250 300 375

MTA4860T 60 G 55 4,3 310 360 450

MTA4880T 80 G 58 5,7 400 480 600

MTA48100T 100 G 63 7,2 500 600 750

MTA48120T 120 G 68 8,6 600 720 900

MTA48140T 140 O 80 10 720 840 1050

MTA7240T

72

40 G 55 4,3 200 240 300

MTA7250T 50 G 57 5,4 250 300 375

MTA7260T 60 G 61 6,5 310 360 450

MTA7280T 80 G 68 8,6 400 480 600

MTA72100T 100 O 80 10,8 500 600 750

MTA72120T 120 O 86 13 600 720 900

MTA8040T

80

40 G 56 4,8 200 240 300

MTA8050T 50 G 58 6 250 300 375

MTA8060T 60 G 63 7,2 310 360 450

MTA8080T 80 O 73 9,6 400 480 600

MTA80100T 100 O 81 12 500 600 750

MTA80120T 120 O 88 14,4 600 720 900

SPECIFICATIONS CONVENTIONAL CHARGERSR Stock product

Box length Width height

G 580 363 440

O 660 430 500

RR

R

R

R

R

R

R

■ Only suitable for flooded batteries ■ Three-fase chargers 3x400VAC

■ Maintenance charge function included as a standard

8

CTEK

BATTERY CHARGERS

SPECIFICATIONS HIGH-FREQUENT CHARGERS

The people at CTEK firmly believe that they have built ‘the smartest battery chargers in the world’. The specifications are indeed unique – and it’s all offered for an attractive price. Product development and inspection activities take place in Sweden, while the production facilities are located in the East. The high frequency CTEK chargers are available in different power classes, ranging from 5W to 300W.

Box length Width height

A 142 51 36

B 168 65 38

C 191 89 48

D 235 130 35

CTEK XC800 6 0,8 A 0,3 0,05 4 8 12

CTEK XS800

12

0,8 A 0,3 0,05 4 8 12

CTEK MXS4003 4 B 0,6 0,1 20 40 60

CTEK XS7000 7 C 0,8 0,15 35 70 105

CTEK XS25000 25 D 1,4 0,5 125 250 375

CTEK XT14000 24 14 D 1,4 0,5 70 140 210

CTEKCharger

Voltage

(V)

Charging Current

(a)Box

Weight

(Kg)

CapaCity

(KW)

Sealed 13h Sealed 20h

min Ah/5h max Ah/5h max Ah/5h

■ Monophase chargers 230VAC

■ Does not damage sensitive electronics on the vehicle ■ Sparkproof ■ Trickle charging for optimal battery life ■ Revitalizes fully discharged batteries ■ Ideal charging, even if the supply voltage falls to 170V ■ As maintenance charger suitable for all types of lead acid batteries (flooded, MF, Gel,

and AGM batteries). Check waterlevel regulary! ■ Max Ah/5h when used as maintenance charger:

CTEK XC800 and XS800: up to 60 Ah/5h CTEK MXS4003: up to 120 Ah/5h CTEK XS7000: up to 225 Ah/5h

■ Capable of restoring sulphated batteries to operating level ■ Approved for outdoor use

R Stock product

R

R

R

R

9

CHARGERS

SPECIFICATIONS HIGH-FREQUENT CHARGERS MEC

MEC is a European manufacturer of chargers registered in Hong Kong and with a factory in Dong Guan, China. MEC is proud to develop and manufacture high quality chargers with a distinctive appearance. MEC makes sure that all its products are finished to its high standards – from product design to mould production, panel production and painting, and to the testing of the product in the final stages before delivery. This close control of the process means that MEC can adjust the product to the needs of the customer, even for small volumes. Another advantage is that this permits greater control over costs, quality and delivery dates.

MECCharger

Voltage

(V)

Charging

Current

(a)

Box Weight

(Kg)

CapaCity

(W)

Sealed triCKle Charge

MAx Ah

pieCeS /

Box

pieCeS /

BulK12h 15h

min Ah/20h max Ah/20h max Ah/20h

MEC 12/1 (WI)

12

1 A 0.280 20 7 12 16 80 30 210

MEC 12/1 PI (WI) 1 A 0.280 20 7 12 16 80 30 210

MEC 12/2.7 (WI) 2.7 A 0.280 50 19 32 42 220 30 210

MEC 12/2.7 PI (WI) 2.7 A 0.280 50 19 32 42 220 30 210

MEC 12/4 4 B 0.780 70 29 48 62 320 16 112

MEC 12/6 6 B 0.780 110 43 72 94 450 16 112

MEC 12/10 10 C 0.930 180 72 120 156 700 16 112

MEC 12/15 (WI) 15 D 1.4 260 108 180 234 1000 16 112

MEC 12/21 (WI) 21 D 1.4 370 144 240 312 1500 8 80

MEC 24/0.5 PI (WI)

24

0.5 A 0.266 18 4 6 8 40 30 210

MEC 24/1.5 PI (WI) 1.5 A 0.280 55 11 18 23 120 30 210

MEC 24/3 3 B 0.780 110 22 36 47 240 16 112

MEC 24/5 5 C 0.930 180 36 60 78 400 16 112

MEC 24/8 (WI) 8 D 1.5 280 58 96 125 600 8 80

MEC 24/13 (WI) 13 D 1.5 450 86 144 187 1000 8 80

MEC 36/1.5 36 1.5 B 0.780 80 11 18 23 120 16 112

Box length Width height

A 106 65 45

B 152 110 42

C 175 115 45

D 225 110 50

■ Monophase charger 230VAC

■ PI: compact plug-in charger ■ WI: wide-input 90....260VAC

■ High-frequency technology ■ With trickle charging ■ LED indication ■ Different plug types available ■ Three-stage charging curve guarantees highly

versatile applications

R Stock product

R

R

R

R

R

10

BATTERY CHARGERS

SPECIFICATIONS HIGH-FREQUENT CHARGERS MORIIn addition to an extensive range of traditional chargers, Mori also has a very complete and reliable series of high-frequent chargers. Powerswitch chargers – Mori’s flagship products – feature the latest technology for charging your batteries in the most efficient way possible. Thanks to the high-quality protection against moisture and dust offered by encapsulation in resin, the chargers are extremely reliable.

R Stock product

PSW170 12V12

2,5-12 A 2,4 0,23 30 140 120 - 120

PSW350 12V 10-25 A 2,4 0,45 100 300 240 - 240

PSW350 12/24V 12/24 2,5-12 A 2,4 0,41 30 140 120 - 120

PSW350 24V

24

2,5-12 A 2,4 0,41 30 140 120 - 120

PSW450 24V 5-15 A 2,4 0,5 60 180 160 - 160

PSW500 24V 7-20 A 2,6 0,67 80 240 200 - 200

PSW1000 24V 10-30 B 3,4 1 120 360 300 - 300

PSW1800 24V 15-60 C 6 2 180 720 600 360 600

PSW1800 24V P 15-60 D 8 2 180 720 600 360 600

PSW3000 24V 18-90 E 7,2 3,1 270 1080 900 540 900

PSW4000 24V T 25-120 F 10,9 4 360 1400 1200 720 1200

PSW4000 24V TP 25-120 G 15,2 4 360 1400 1200 720 1200

PSW8000 24V T 50-240 H 21,5 8 720 2800 2400 1400 2400

PSW8000 24V TP 50-240 H 26,1 8 720 2800 2400 1400 2400

PSW1000 36V

36

7-20 B 2,3 1 80 240 200 - 200

PSW1800 36V 15-40 C 3,9 2 160 480 420 240 420

PSW3000 36V 15-70 E 7,2 3,6 180 840 720 420 720

PSW4000 36V T 20-80 F 11,3 4 300 960 840 480 840

PSW4000 36V TP 20-80 G 17,5 4 300 960 840 480 840

PSW6500 36V T 25-120 F 11,5 6 360 1400 1200 720 1200

PSW6500 36V TP 25-120 G 18,2 6 360 1400 1200 720 1200

PSW8000 36V T 40-160 H 22,7 8 600 1900 1600 960 1600

PSW8000 36V TP 40-160 H 28,8 8 600 1900 1600 960 1600

PSW13K 36V T 50-240 H 23,0 12 720 2800 2400 1400 2400

PSW13K 36V TP 50-240 H 29,7 12 720 2800 2400 1400 2400

PSW POWERSWITCH

ChargerVoltage

(V)

Charg. Curr.

(a)

Box Weight

(Kg)

CapaCity

(KW)

Flooded 13h Flooded 11h Flooded 8h Sealed 13h

min Ah/5h max Ah/5h max Ah/5h max Ah/5h max Ah/5h

R

R

RR

R

R

R

R

R

R

R

11

CHARGERS

SPECIFICATIONS HIGH-FREQUENT CHARGERS MORIR Stock product

PSW1000 48V

48

5-15 B 2,3 1 60 180 160 - 160

PSW1800 48V 10-30 C 3,9 2 120 360 300 180 300

PSW3000 48V 16-55 E 7,2 3,7 180 660 540 330 540

PSW4000 48V IP: B32 16-65 E 7,2 4,4 180 780 660 420 660

PSW4000 48V T 20-80 F 11,3 5,3 300 960 840 480 840

PSW4000 48V TP 20-80 G 20 5,3 300 960 840 480 840

PSW6500 48V T 25-120 F 11,5 8,1 360 1400 1200 720 1200

PSW6500 48V TP 25-120 G 20 8,1 360 1400 1200 720 1200

PSW8000 48V T 50-160 H 22,7 10,6 600 1900 1600 960 1600

PSW8000 48V TP 50-160 H 28,8 10,6 600 1900 1600 960 1600

PSW13K 48V T 60-240 H 23 16,2 720 2800 2400 1400 2400

PSW13K 48V TP 60-240 H 29,7 16,2 720 2800 2400 1400 2400

PSW3000 72V

72

10-30 E 7,2 3,1 120 360 300 180 300

PSW3500 72V T 15-40 F 10,9 4 160 480 420 240 420

PSW3500 72V TP 15-40 G 20 4 160 480 420 240 420

PSW4000 72V IP: B32 15-40 E 7,2 4,1 160 480 420 240 400

PSW7000 72V T 20-80 F 12,3 8 300 960 840 480 840

PSW7000 72V TP 20-80 G 21 8 300 960 840 480 840

PSW10K5 72V T 30-120 H 23,2 12 360 1400 1200 720 1200

PSW10K5 72V TP 30-120 H 32,4 12 360 1400 1200 720 1200

PSW14K 72V T 50-160 H 24,7 16 600 1900 1600 960 1600

PSW14K 72V TP 50-160 H 33,9 16 600 1900 1600 960 1600

PSW3000 80V

80

10-30 E 7,2 3,4 120 360 300 180 300

PSW3500 80V T 15-40 F 10,9 4,3 160 480 420 240 420

PSW3500 80V TP 15-40 G 20 4,3 160 480 420 240 420

PSW4000 80V IP: B32 15-40 E 7,2 4,5 160 480 420 240 400

PSW7000 80V T 20-80 F 12,3 8,5 300 960 840 480 840

PSW7000 80V TP 20-80 G 21 8,5 300 960 840 480 840

PSW10K5 80V T 30-120 H 23,2 12,8 360 1400 1200 720 1200

PSW10K5 80V TP 30-120 H 32,4 12,8 360 1400 1200 720 1200

PSW14K 80V T 50-160 H 24,7 17,6 600 1900 1600 960 1600

PSW14K 80V TP 50-160 H 33,9 17,6 600 1900 1600 960 1600

PSW POWERSWITCH

ChargerVoltage

(V)

Charg. Curr.

(a)

Box Weight

(Kg)

CapaCity

(KW)

Flooded 13h Flooded 11h Flooded 8h Sealed 13h

min Ah/5h max Ah/5h max Ah/5h max Ah/5h max Ah/5h

R

R

R

RR

12

BATTERY CHARGERS

MORISPECIFICATIONS HIGH-FREQUENT CHARGERS

Box length Width height

A 234 121 67

B 259 146 81

C 330 175 100

D 330 300 100

E 430 280 105

F 540 340 130

G 540 340 210

H 590 435 265

■ Monophase 230Vac and three-phase 400Vac chargers available (T models) ■ T: Three-phase chargers ■ P: With acid circulation pump ■ DI: Automatically switching monophase chargers 110VAC/230VAC. Can be used all over the world ■ IP B32: 32A blue input plug ■ A standard feature on all PSW chargers is protection against moisture and dust by encapsulation in resin. ■ PSW chargers are equipped as standard with a contact to which options such as the round in-built indicator (see page 6) and the immobilizer can be

connected. This is particularly useful when the PSW charger is installed on the vehicle. The external indicator shows if the charger is active or has stopped. The end of lease function is also shown

■ With maintenance charge function ■ Models for onboard installation are available ■ MULTIPROGRAMMER TOPII is available for PSW chargers (see page 5)

MPTOPII

The main benefits of “HF” chargers at a glance:

■ Weight and volume is much lower (impact on installation and transport costs).

■ Flexibility of installation (switchable charging curve, e.g. conventional/gel).

■ Only a few types needed, thus easier for the after-sales service (the installation engineer always has a charger with him: problems are solved more quickly because only one service call is required instead of two).

■ Does not require supply voltage calibration (works at least from 200 V to 265V at 100% power, without any fluctuation)

■ Lowest possible electricity consumption combined with positive effect on battery life (double savings).

■ More modern, more intelligent and greater elegance. ■ Nearly all “HF” chargers are equipped with a fan for efficient

cooling. ■ Some “HF” chargers can charge a variety of battery voltages

(e.g. MultiPac).

ROUND IN-BUILT INDICATOR

(PSW External LED)This panel meter indicates the status of the charger with 3 super bright LEDS: busy charging, charging completed and end of lease. Suitable for both EX and PSW chargers.

13

Boxlength Width height

280 260 110

■ For traditional and sealed batteries ■ Wide-input 90-265 VAC with PFC ■ IP66 waterproof protection ■ No fan ■ Available in every common voltage ■ Maintenance charge ■ Output voltage: 12V, 24V, 36V, 48V, 60V, 72V, 120V and 144V ■ The charger can be mounted in every position, as long as the cooling ribs

are enough ventilated ■ Protected against short circuit and inversed polarity connection ■ Contact for immobiliser ■ Reliable and robust for demanding surroundings ■ Budget friendly

R Stock product

At last, a robust and affordable charger which also works in the most demanding surroundings: the IP charger ! This microprocessor controlled wide-input charger is dust- and waterproof (IP66), this means the charger can be used in all applications. The IP charger is available in every common voltage and is equiped with a maintenance charge function. Furthermore, the charger is supplied with a protection against short circuit and inversed polarity connection and their is a contact for an immobiliser.

IPSPECIFICATIONS HIGH-FREQUENT CHARGERS

CHARGERS

IPCharger Voltage

(V)

Charg. Curr.

(a)

Weight

(Kg)

CapaCity

(KW)

Flooded 15u Flooded 13u Flooded 8u Sealed 13u

min Ah/5h max Ah/5h max Ah/5h max Ah/5h max Ah/5h

IP1000 12V WI 12 30 4,3 1,1 95 300 240 130 240

IP1000 24V WI 24 30 4,3 1,4 95 300 240 130 240

IP1000 36V WI 36 21 4,3 65 210 170 90 170

IP1000 48V WI 48 18 4,3 1,9 55 185 145 75 145

R

R

R

R

14

BATTERY CHARGERS

POWERFINNSPECIFICATIONS HIGH-FREQUENT CHARGERS

Powerfinn is a Finnish company that specializes in developing and manufacturing battery chargers and power supplies, which utilize high-frequency technology. The company was established in 1989 and is part of the Micropower group. Powerfinn applies the latest available technology in all stages of product development and stands among the leaders in its field. When this is combined with creative design, the goal of producing “the ultimate equipment” is brought as close as possible. Switching technology is utilized in the realization of the products. This offers remarkable advantages in relation to traditional equipment: the benefits of high power and efficiency are attained in addition to low weight and compact size. The use of high-frequency technology together with intelligent development and surface mounted components make the extremely high power/size relation possible. When this relation is considered to be the yardstick of competence, Powerfinn can be said to be a forerunner in its field. Apart from the high power/size relation the products of Powerfinn are also competitive because of their versatility. Many of them can be connected to a PC to allow a higher level of control over the battery charging process. All of the chargers are microprocessor controlled. This ensures their extreme accuracy and battery friendly function.

Box length Width height

A 220 112 73

B 350 176 83

C 267 135 85

D 250 80 400

PAC POWERADVANCED CHARGER

ChargerVoltage

(V)

Charg. Curr.

(a)

Box Weight

(Kg)

CapaCity

(KW)

Flooded (ah/5h) Sealed iuiaou (ah/5h) Sealed iuou (ah/5h)

min 9h 12h 15h min 9h 12h 15h min 9h 12h 15h

PAC 600 (R028) 12 20 A 2 0,6 50 50 150 150 0 0 0 0 35 50 160 200

PAC 600 (R028) 24 20 A 2 0,6 50 50 150 150 0 0 0 0 35 50 160 200

PAC 800 12-24V 30A (R126) 12/24 30 A 2 0,8 75 75 225 225 0 0 0 0 50 65 250 300

PAC 800 12-24V 30A (R126) WI 12/24 30 A 2 0,8 75 75 225 225 0 0 0 0 50 65 250 300

PAC 800 12-24V 25A IP44 (R127) 12 25 B 2,5 0,8 75 75 225 225 0 0 0 0 83 110 220 250

PAC 800 12-24V 25A IP44 (R127) 24 25 B 2,5 0,8 75 75 225 225 0 0 0 0 83 110 220 250

PAC 800 12V 50A (E512B) 12 50 A 2 0,8 108 240 415 583 70 70 330 420 0 0 0 0

PAC 800 24V 30A (E112) 24 30 A 2 0,8 65 144 250 350 40 40 260 260 0 0 0 0

PAC 800 36V (E310) 36 20 A 2 0,8 50 80 175 250 35 35 170 200 0 0 0 0

PAC 800 48V (E210) 48 15 A 2 0,8 40 65 125 180 40 40 125 180 0 0 0 0

PAC 1600 12V (XXXX) 12 60 C 2,5 1,6 180 180 420 675 180 180 420 675 0 0 0 0

PAC 1600 24V (BB132) 24 60 C 2,5 1,6 210 210 500 625 245 245 420 590 245 245 420 590

PAC 1600 36V (BB232) 36 40 C 2,5 1,6 140 140 320 400 170 170 280 390 170 170 280 390

PAC 1600 48V (BB332) 48 30 C 2,5 1,6 105 105 250 315 120 120 210 300 120 120 210 300

PAC 3200 12V (XXXX) 12 200 D 7,5 1,6 666 1120 1655 2800 666 666 1387 2800 0 0 0 0

PAC 3200 24V (VE110) 24 127 D 7,5 3,2 402 715 1050 1780 420 420 1050 1778 0 0 0 0

PAC 3200 36V (VE311) 36 90 D 7,5 3,2 300 510 750 1260 300 300 750 1260 0 0 0 0

PAC 3200 48V (VE210) 48 64 D 7,5 3,2 160 335 480 672 160 270 480 672 0 0 0 0

PAC 3200 72V (XXXX) 72 44 D 7,5 3,2 90 200 310 462 115 180 290 374 0 0 0 0

PAC 3200 80V (VE410A) 80 40 D 7,5 3,2 81 185 280 420 100 160 300 340 0 0 0 0

■ Monophase chargers 230VAC ,with maintenance charge function ■ Very light and compact, high-tech design for an exceptional power/volume ratio ■ Every Powerfinn charger has 16 integrated charging curves, easily adjustable by means of a rotary switch ■ All PAC chargers are microprocessor controlled and achieve a minimum efficiency of 86% ■ PAC 600, 800 and 1600 are equiped with a Peters Elpeguard coating for optimal protection against liquid & dust ■ WI: wide-input 65....250VAC (65....110VAC reduced power

R

R

R

R Stock product

R

15

POWERFINNSPECIFICATIONS HIGH-FREQUENT CHARGERS

CHARGERS

16 EMROL - Industrieweg 15 - B-2390 Malle - Belgium - T +32(0)3/309.24.24 - F +32(0)3/311.79.50 - info@emrol.com - www.emrol.com

(E) versie 10 - 10/10

BATTERY CHARGERS

CHARGERS

CHARGER TECHNOLOGY - CONVENTIONAL VERSUS HIGH FREQUENCY

Which charger is the best?This depends on the application, your budget and the desired efficiency. When it charges a battery, the charger draws electrical current from the mains and supplies it to the battery. However, various losses arise during the transformation process:

■ Power factor: this is an expression of the relationship between the total absorbed power and the power effectively used by the charger. This will typically be about 90% for “OK” and “HF” chargers, but it falls to only about 55% for “GK” chargers. There are also “HF” chargers with an A-PFC circuit (Active Power Factor Correction) that reach 100%. Large industrial electricity consumers are often charged on the basis of the power factor, and indeed “GK” chargers use almost twice as much electricity as effectively supplied to the battery.

■ Efficiency: during the conversion from supply voltage to the battery voltage energy is also lost in the form of heat. The greater the efficiency of the charger, the less loss there will be. “HF” chargers reach ± 92%, “OK” chargers ± 87%, and “GK” chargers ±85%.

■ Intelligence: When a battery is overcharged a lot of energy is lost in the form of heat. Intelligent charging curves accurately determine how much energy a battery needs, and stop the main charging process at the right moment. Overcharging also reduces battery life.

ConFiguration poWer FaCtor eFFiCienCySize and Weight

intelligenCeMoiSture and

duSt reSiStanCeBudget

“OK” ++++ ++++ + +++ +++++ +++++

“GK” + +++ +++ ++++ ++++ ++++

“HF” +++++ +++++ +++++ +++++ +++ +++

What are the differences?A transformer is required for reducing the higher mains voltage to the low voltage needed by the battery. Mains voltage arrives via the power plug at a frequency of 50 to 60 Hertz. At these frequencies the transformer needs a large iron core wound round with copper wire. A battery charger that uses a transformer of this kind with an iron core is known as a conventional or ferro-resonant charger.

■ The charging current of an unregulated charger (an “OK” charger) depends on the supply voltage. This is why these batteries have to be calibrated during installation, when the mains voltage is different from the nominal voltage.

■ In regulated chargers (a “GK” charger) a current control device automatically compensates for any swings in supply voltage. This control has other advantages as well, such as the ability to generate a variety of charging curves.

■ A high frequency charger (an “HF” charger) contains additional components that first convert the mains voltage to a much higher frequency (e.g. to 100,000 Hertz). The conventional transformation process takes place in the second stage, but at such high frequencies the transformer can be much smaller and needs only a small ferrite core, and far fewer windings.

■ The picture shows you the difference between a conventional transformer and a high frequency transformer of the same power class (600W).

600W “OK” transfo

600W “HF” transfo