Upload
ngominh
View
229
Download
4
Embed Size (px)
Citation preview
Ball Check ValvesStorm Water and Wastewater Applications
Threaded Model 208, 208B, 208T
Flanged Model 408, 4082
Threaded/Flanged Model 508
Model 408, 4082 & 408FBSize Range: 3”- 14”
A favorite and proven valve Model in the submersible water and wastewaterindustry for decades. The 408 features a clean-out port permitting access to theinside of the valve without removal from the pipe line. Flanged ANSI 125 connections. Model 408FB is equipped with a “floating” rather than a “sinking”ball to prevent backflow from drains.
On special request, Flomatic offers optional high temperature and chemical resistance Model 408SS, an all stainless steel valve body with Nitrile coated metal ball or solid glass filled Teflon Ball.
Model 408/4082/408FB are available in eightdifferent sizes: 3”,4”, 5”, 6”, 8”, 10”,12” and 14”.
Model Max. Temperture Max. Pressure
408 and 408FB 180oF 150 PSI
SPECIAL ADAPTATION:All Model 408 valves canbe equipped with optionalProx Switch. Optional corrosion resistant coatingsare available.
HEADLOSS CHARTSMODEL 208
MODEL 408
Warranty: LIMITED ONE YEAR WARRANTY: The Flomatic Corporation warrants that its Ball Check Valves in all sizes are free from defects in materials and workmanship.Flomatic will replace any valve covered by this warranty found to be defective within one year from time of sale. This warranty will be void if the product has been modified inany way by the purchaser, or is subject to unreasonable use.
PRESSURE LOSS
PRESSURE LOSS
PRESSURE LOSS
PRESSURE LOSS
FLOW IN GALLONS PER MINUTEFLOW IN GALLONS PER MINUTE
FLOW IN GALLONS PER MINUTE FLOW IN GALLONS PER MINUTE
ANominalSize
Part Number
CMaximumWidth
DLength
EBall
Diameter
BoltCircleDiameter
BoltHole
Diameter
NumberofBolts
Weight(Pounds)
3”* 2144-2 10 1/4” 9 1/2” 3 15/16” 6” 3/4” 4 45
4”* 2145-2 11 3/4” 11 1/2” 4 23/32” 7 1/2” 3/4” 8 72
5” 2143 13 1/8” 1325/32” 6 1/64” 8 1/2” 7/8” 8 85
6” 2146 14 27/32” 16 1/16” 7 1/4” 9 1/2” 7/8” 8 132
8” 2147 18 5/8” 1911/16” 9 21/32” 11 3/4” 7/8” 8 218
10” 2148 22 59/64” 23 5/8” 11 13/16” 14 1/4” 1” 12 272
12” 2149 28 25/64” 27 35/64” 14 13/32” 17” 1” 12 541
14” 2150 32 9/32” 34 29/64” 16 35/64” 18 3/4” 1 1/8” 12 790
Flomatic Corporation 15 Pruyn’s Island Drive
Glens Falls, NY 12801-4421
Telephone: 1-(800)-833-2040 Direct Telephone: 1-(518)-761-9797
Fax: 1-(800)-314-3155 Direct Fax: 1-(518)-761-9798
www.flomatic.com High Quality Valves Built to Last...
MODEL 508
MODEL 208T
MODEL 408 & 4082
*Model 4082
From America’s #1 Ball Check Valve Manufacturer...
Benefits & FeaturesValves that end cloggingFlow EfficientLow Maintenance Cost
Recommended for flow velocities of3’ to 5’ per sec. Horizontal installationrequires 20’ static head for positive sealing.
Available in:Cast iron Ductile IronStainless Steel PVC
*FLOATING BALL ALSO AVAILABLE, ADD “FB” TO PART NUMBERFOR REFERENCES USE ONLY, SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
Model 208 Ball Check Valve - Cast Iron
Model 208T PVC Ball Check - PlasticSize Range: 1”- 2”
Epoxy coated Cast Iron body Model208 . Features NITRILE (Buna-N)“Sinking Ball” or Floating Ball” (ad “FB”to part number). E-Z access port for cleaning or backflush. Size Range: 11/4”- 11/2” 2”. Temp Max:180o(80C)
Epoxy coated Cast Iron body withcorrosion resistant phenolic ”Sinking Ball”(floating optional Model 508FB. Simpletwo bolt access cover for clean out.Feature replaceable NITRILE (Buna-N)valve seat.)3” & 4” have no access cover4” model is flanged.
Model 508/508FB are available in seven different sizes: 1”, 11/4”, 11/2”, 2”, 21/2”, 3” and 4.”
Model 208T, corrosion resistant PVC body. Threaded female x female connection. Nitrile (Buna-N)seal. Also available with PVC socket weld Model 208S.Sizes: 1”, 11/4”, 11/2”, 2”. Temp Max: 150o(65C) Not for ground burial.
Buna-N VulcanizedMetal Ball
UnrestrictedFlow Way
Access port for in-line service.
Epoxy coated inside and out
Size Part Number “A” “B” WidthWeight(Pounds)
1” 3232 41/2” 221/32” 315/16” 3.5
11/4” 3233 513/64” 37/64” 41/4” 4.5
11/2” 3234 545/64” 313/32” 451/64” 6
2” 3235 627/32” 4” 57/16” 8
21/2” 3236 77/8” 429/32” 61/4” 11.5
3” 2044 9 19/32” 5” 8 9/16” 30
4” 2045 109/16” 6” 1019/32” 45
Add“T”after part number for NPT threads. Add “S” after part number for solvent weld.
Add“P”after part number for BSPP threads. Not for ground burial.
New Vacuum Relief feature to reduce water hammer & noise in piple lines
*AvailableNPT, BSPP or solvent weld connections. Valve canbeused at temperatures up to180oF(80oC).
1-PVC CAP
2-NITRILE “O” RING
3-NITRILE BALL
4-PVC BODY
Item Quanity Description Material ASTM
1 1 Body (Epoxy Coated) Cast Iron A - 48
2 1 Cover (Epoxy Coated) Cast Iron A - 48
3 1 *Ball Phenolic
4 1 Seat Seal Nitrile
5 1 Bonnet Seal Nitrile
6 2 Bolt Stainless Steel 304
7 4 Washer Stainless Steel 304
8 2 Hex Nut Stainless Steel 304
Models 208, 408, 4082 and 508Flomatic Ball Check Valves are especially designed fordemanding wastewater and storm water pumping applications.
Model 508 (Formally Model 50) Model 208 Model 408 & 4082
11/4” - 2” 3” - 14”
Stainless Steel BoltsStainless Steel Bolts
Cast Iron Body
Phenolic Ball
Seal
Threaded Brass Plate
Hex Nuts
Stainless Steel Retaining Ring
Cast Iron Body
Ductile Iron
Access Plate Ductile Iron
Phenolic Ball
Seal Rubber Covered Hollow Iron Ball
Rubber Seal
Stainless Steel Screws
Model 208 Model 208T
Model 508 and 508FBSize Range: 1”- 4”
3” 4”
Model Max. Temperture Max. Pressure
508 and 508FB 180oF 150 PSI
Size (in.) Part # A B C WGT.(lbs.)
11/4” 2141 51/16” 21/2” 3” 4 .5
11/2” 2142-0 63/4” 31/2” 4 3/16” 9.5
2” 2142 63/4” 31/2” 4 3/16” 9
Item Qty. Description Material ASTM#
1 1 Valve Body (EPOXY COATED)
Cast Iron A126 Class B
2 1 Ball(SINKING)
Buna-N ---------
3 1 Cap Cast Iron A126 Class B
4 1 O-Ring Buna-N ---------
* Optional bosses for rail mounting available on the 208B model.
“A”- Size PartNumber
AMaximumWidth
BMaximum Ball
DiameterWeight(Pounds)
1” - NPT 2131T 627/32” 41/2” 11/2” 1.0
1”-Socket 2131S 625/32” 41/2” 11/2” 1.0
11/4”-NPT 2132T 521/32” 41/2” 11/2” 1.0
11/4”Socket 2132S 55/8” 41/2” 11/2” 1.0
11/2”-NPT 2133T 813/64” 611/32” 21/2” 1.5
11/2”Socket 2133S 813/64” 611/32” 21/2” 1.5
2”-NPT 2134T 71/16” 611/32” 21/2” 1.5
2”-Socket 2134S 71/16” 611/32” 21/2” 1.5
CAP
O'RINGBALL
BODY
From America’s #1 Ball Check Valve Manufacturer...
Benefits & FeaturesValves that end cloggingFlow EfficientLow Maintenance Cost
Recommended for flow velocities of3’ to 5’ per sec. Horizontal installationrequires 20’ static head for positive sealing.
Available in:Cast iron Ductile IronStainless Steel PVC
*FLOATING BALL ALSO AVAILABLE, ADD “FB” TO PART NUMBERFOR REFERENCES USE ONLY, SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
Model 208 Ball Check Valve - Cast Iron
Model 208T PVC Ball Check - PlasticSize Range: 1”- 2”
Epoxy coated Cast Iron body Model208 . Features NITRILE (Buna-N)“Sinking Ball” or Floating Ball” (ad “FB”to part number). E-Z access port for cleaning or backflush. Size Range: 11/4”- 11/2” 2”. Temp Max:180o(80C)
Epoxy coated Cast Iron body withcorrosion resistant phenolic ”Sinking Ball”(floating optional Model 508FB. Simpletwo bolt access cover for clean out.Feature replaceable NITRILE (Buna-N)valve seat.)3” & 4” have no access cover4” model is flanged.
Model 508/508FB are available in seven different sizes: 1”, 11/4”, 11/2”, 2”, 21/2”, 3” and 4.”
Model 208T, corrosion resistant PVC body. Threaded female x female connection. Nitrile (Buna-N)seal. Also available with PVC socket weld Model 208S.Sizes: 1”, 11/4”, 11/2”, 2”. Temp Max: 150o(65C) Not for ground burial.
Buna-N VulcanizedMetal Ball
UnrestrictedFlow Way
Access port for in-line service.
Epoxy coated inside and out
Size Part Number “A” “B” WidthWeight(Pounds)
1” 3232 41/2” 221/32” 315/16” 3.5
11/4” 3233 513/64” 37/64” 41/4” 4.5
11/2” 3234 545/64” 313/32” 451/64” 6
2” 3235 627/32” 4” 57/16” 8
21/2” 3236 77/8” 429/32” 61/4” 11.5
3” 2044 9 19/32” 5” 8 9/16” 30
4” 2045 109/16” 6” 1019/32” 45
Add“T”after part number for NPT threads. Add “S” after part number for solvent weld.
Add“P”after part number for BSPP threads. Not for ground burial.
New Vacuum Relief feature to reduce water hammer & noise in piple lines
*AvailableNPT, BSPP or solvent weld connections. Valve canbeused at temperatures up to180oF(80oC).
1-PVC CAP
2-NITRILE “O” RING
3-NITRILE BALL
4-PVC BODY
Item Quanity Description Material ASTM
1 1 Body (Epoxy Coated) Cast Iron A - 48
2 1 Cover (Epoxy Coated) Cast Iron A - 48
3 1 *Ball Phenolic
4 1 Seat Seal Nitrile
5 1 Bonnet Seal Nitrile
6 2 Bolt Stainless Steel 304
7 4 Washer Stainless Steel 304
8 2 Hex Nut Stainless Steel 304
Models 208, 408, 4082 and 508Flomatic Ball Check Valves are especially designed fordemanding wastewater and storm water pumping applications.
Model 508 (Formally Model 50) Model 208 Model 408 & 4082
11/4” - 2” 3” - 14”
Stainless Steel BoltsStainless Steel Bolts
Cast Iron Body
Phenolic Ball
Seal
Threaded Brass Plate
Hex Nuts
Stainless Steel Retaining Ring
Cast Iron Body
Ductile Iron
Access Plate Ductile Iron
Phenolic Ball
Seal Rubber Covered Hollow Iron Ball
Rubber Seal
Stainless Steel Screws
Model 208 Model 208T
Model 508 and 508FBSize Range: 1”- 4”
3” 4”
Model Max. Temperture Max. Pressure
508 and 508FB 180oF 150 PSI
Size (in.) Part # A B C WGT.(lbs.)
11/4” 2141 51/16” 21/2” 3” 4 .5
11/2” 2142-0 63/4” 31/2” 4 3/16” 9.5
2” 2142 63/4” 31/2” 4 3/16” 9
Item Qty. Description Material ASTM#
1 1 Valve Body (EPOXY COATED)
Cast Iron A126 Class B
2 1 Ball(SINKING)
Buna-N ---------
3 1 Cap Cast Iron A126 Class B
4 1 O-Ring Buna-N ---------
* Optional bosses for rail mounting available on the 208B model.
“A”- Size PartNumber
AMaximumWidth
BMaximum Ball
DiameterWeight(Pounds)
1” - NPT 2131T 627/32” 41/2” 11/2” 1.0
1”-Socket 2131S 625/32” 41/2” 11/2” 1.0
11/4”-NPT 2132T 521/32” 41/2” 11/2” 1.0
11/4”Socket 2132S 55/8” 41/2” 11/2” 1.0
11/2”-NPT 2133T 813/64” 611/32” 21/2” 1.5
11/2”Socket 2133S 813/64” 611/32” 21/2” 1.5
2”-NPT 2134T 71/16” 611/32” 21/2” 1.5
2”-Socket 2134S 71/16” 611/32” 21/2” 1.5
CAP
O'RINGBALL
BODY
Ball Check ValvesStorm Water and Wastewater Applications
Threaded Model 208, 208B, 208T
Flanged Model 408, 4082
Threaded/Flanged Model 508
Model 408, 4082 & 408FBSize Range: 3”- 14”
A favorite and proven valve Model in the submersible water and wastewaterindustry for decades. The 408 features a clean-out port permitting access to theinside of the valve without removal from the pipe line. Flanged ANSI 125 connections. Model 408FB is equipped with a “floating” rather than a “sinking”ball to prevent backflow from drains.
On special request, Flomatic offers optional high temperature and chemical resistance Model 408SS, an all stainless steel valve body with Nitrile coated metal ball or solid glass filled Teflon Ball.
Model 408/4082/408FB are available in eightdifferent sizes: 3”,4”, 5”, 6”, 8”, 10”,12” and 14”.
Model Max. Temperture Max. Pressure
408 and 408FB 180oF 150 PSI
SPECIAL ADAPTATION:All Model 408 valves canbe equipped with optionalProx Switch. Optional corrosion resistant coatingsare available.
HEADLOSS CHARTSMODEL 208
MODEL 408
Warranty: LIMITED ONE YEAR WARRANTY: The Flomatic Corporation warrants that its Ball Check Valves in all sizes are free from defects in materials and workmanship.Flomatic will replace any valve covered by this warranty found to be defective within one year from time of sale. This warranty will be void if the product has been modified inany way by the purchaser, or is subject to unreasonable use.
PRESSURE LOSS
PRESSURE LOSS
PRESSURE LOSS
PRESSURE LOSS
FLOW IN GALLONS PER MINUTEFLOW IN GALLONS PER MINUTE
FLOW IN GALLONS PER MINUTE FLOW IN GALLONS PER MINUTE
ANominalSize
Part Number
CMaximumWidth
DLength
EBall
Diameter
BoltCircleDiameter
BoltHole
Diameter
NumberofBolts
Weight(Pounds)
3”* 2144-2 10 1/4” 9 1/2” 3 15/16” 6” 3/4” 4 45
4”* 2145-2 11 3/4” 11 1/2” 4 23/32” 7 1/2” 3/4” 8 72
5” 2143 13 1/8” 1325/32” 6 1/64” 8 1/2” 7/8” 8 85
6” 2146 14 27/32” 16 1/16” 7 1/4” 9 1/2” 7/8” 8 132
8” 2147 18 5/8” 1911/16” 9 21/32” 11 3/4” 7/8” 8 218
10” 2148 22 59/64” 23 5/8” 11 13/16” 14 1/4” 1” 12 272
12” 2149 28 25/64” 27 35/64” 14 13/32” 17” 1” 12 541
14” 2150 32 9/32” 34 29/64” 16 35/64” 18 3/4” 1 1/8” 12 790
Flomatic Corporation 15 Pruyn’s Island Drive
Glens Falls, NY 12801-4421
Telephone: 1-(800)-833-2040 Direct Telephone: 1-(518)-761-9797
Fax: 1-(800)-314-3155 Direct Fax: 1-(518)-761-9798
www.flomatic.com High Quality Valves Built to Last...
MODEL 508
MODEL 208T
MODEL 408 & 4082
*Model 4082