Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
AXAUNO WALL HUNG PAN
SPECIFICATIONSRecommended use Domestic, hotel and commercial
Colour availability White
Rim configuration Box Rim
Bowl configuration P Trap only
Set out 240mm
Pan fixing Bolted to wall
Seat Matching top fix Soft Close Quick Release seat supplied with suite
Material Vitreous china
Weight Pan: 24kg
Standards AS 1172.1
WELS 4 Star
Flushing 4.5/3 litre dual flush
Warranty 15 years (refer to warranty)
CLEANING RECOMMENDATIONSWe recommend the use of soapy water or approved bathroom cleaners.
This bathroom product should not be cleaned with abrasive materials.
Damage caused by any improper treatment is not covered by the product warranty - refer to Warranty Conditions..
To see the complete AXA range go to www.reece.com.au/bathrooms
510
360
400 435
180
435
340 375 240
page 1 of 2
Disclaimer: Products in this specification manual must by regulation be installed by licensed and registered trade people. The manufacturer/distributor reserves the right to vary specifications or delete models from their range without prior notification. Dimensions are nominal measurements only. Dimensions and set-outs listed are correct at time of publication however the manufacturer/distributor takes no responsibility for printing errors.
Tech Page Version 5
WMKA21243
The more stars the more water efficient
WATER RATINGwww.waterrating.gov.au
In accordance with AS/NZS 6400
Licence No. 0437AXA ONE SrL
4.5 L per full flush / 3 L per half flush
3.3 litres average flush
AXAUNO WALL HUNG PAN
INSTALLATION INSTRUCTIONS
Note
In all circumstances the wall onto which the pan is mounted shall be capable of supporting the pan and load without deflection. All measurements for roughing in should be taken from finished wall/floor. Cistern/wall mounting brackets are not supplied, but fixing kit is. Dimensions shown are nominal measurements only.
1. Screw the fixing bolts onto the protruding all threadensuring that the cut out is pointing outward (fig 1). Protruding all thread will need to be cut to size based on the wall thickness.
2. Insert fixing plugs into the pan wall fixing holes. Carefully install pan onto brackets and fix into position with allen key provided (fig 2).
3. Ensure pan is level before fully tightening. Grubscrew with allen key supplied (fig 3).
AXA - UNO WALL HUNG PAN
Dear Plumber
Could you please ensure a copy of the installation instructions is left with the end user for future reference.
WARRANTY & CARE DETAILS
a. Screw the fixing bolts onto the protruding all thread ensuring that the cut out is point-ing outward (fig 1). Protruding all thread will need to be cut to size based on the wall thickness.
b. Insert the black fixing plugs into the pan wall fixing holes. Carefully install pan onto brackets and fix into position with allen key provided (fig 2).
c. Ensure pan is level before fully tightening. Grub screw with allen key supplied (fig 3).
d. Flush test and check for leaks. Joint seal pan to wall using silicone.
e. Fit decorative caps.
Fig 1 Fig 2
Fig 3
Please note: Cistern/Wall mounting brackets are not supplied, but fixing kit is
4. Flush test and check for leaks. Joint seal pan to wallusing silicone.
5. Fit decorative caps.
Installation of Toilet Seat and Cleaning (separate instructions enclosed)
It is recommended that toilet seat and cover be installed after all trades are finished. The high quality vitreous china finish on this sanitary ware can be maintained by simply using mild soapy water and wiping over. No abrasive cleaners or chemicals should be used on vitreous china surface or toilet seats as this may lead to surface damage.
Do not use any toilet cleaners in the cistern. As the chemical compound may effect the internal mechanisms.
page 2 of 2
Plumbers, please ensure a copy of the installation instructions is left with the end user for future reference