Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
AVIO Inline Axial Fan
Select models available for next day delivery
Tel 01384 275800 Fax 01384 275810 Email [email protected] Website eltafans.com2
Page Information
3 Performance Range Curves
4 Performance, SFP & Electrical Data
5 Dimensional Data
6 Accessories
Contents
• IPX4 splash proof, suitable for installation in Zones 1 and 2• Quiet operation, provides unobtrusive ventilation• 100mm model has less than 8 watts operating power consumption for energy
saving
• Unique BLADELET impeller design for optimised performance and acoustics• Double insulated, no earth connections required• Environmentally friendly, manufactured using totally recyclable plastic
components
• Discreet duct mounting• Complies with all UK building regulation requirements• Each fan is individually tested prior to leaving the factory to meet the relevant
standards
Product OverviewAVIO
ApplicationDesigned for intermittent extract of contaminants such as humid air and odour from bathrooms, kitchens and utility rooms. The fans are only triggered when required or when the room is in use.
Avio fans can be mounted in a duct and away from the room, limiting noise and allowing low profile inlet grilles to be used.
OperationManual: An external switch can manually start the fan.
Timer: The fan has an integral over-run timer which will keep the fan running for a set amount of time after the external switch has been turned off.
Elta Fans Limited has a policy of continuous product development and improvement and therefore reserves the right to supply products which may differ from those illustrated and described in this publication. Confirmation of dimensions and data will be supplied on request. 3
0
10
20
30
40
50
60
70
0.00 10.00 20.00 30.00 40.00 50.00 60.00 70.00 80.00 90.00 100.00
Stat
ic p
ress
ure
Pa
Volume L/s
3
2
1
Dry performance based on EN 308 Wet performance based on -5°C supply 95% RH, 21°C extract 50% RH
AVIO 100 AVIO 125 AVIO 150
Performance Range CurvesAVIO AC
1
2
3
Tel 01384 275800 Fax 01384 275810 Email [email protected] Website eltafans.com4
Single Phase 220V to 240V / 50Hz or 60Hz
220-240V. 50-60Hz. Air performance measured according to ISO 5801.All data measured in our TÜV Rheinland accredited laboratory.
Performance & Electrical DataAVIO
Product Code
Airflow L/s max
Power W max
Sound Pressure
dBA @3 m
Ambient Temperature
°C max
AVIO 100 23.5 8 34 50
AVIO 125 45.7 14 39 50
AVIO 150 88.6 24 45 50
AC
Elta Fans Limited has a policy of continuous product development and improvement and therefore reserves the right to supply products which may differ from those illustrated and described in this publication. Confirmation of dimensions and data will be supplied on request. 5
Single Phase
Dimensional DataAVIO
Product Code A B C D
AVIO 100 112.5 115 90 99
AVIO 125 136.5 165 100 119.6
AVIO 150 164.5 165 115 148
ACA
B
øD
C
Mounting feet supplied separately. Dimensions are in mm.
Tel 01384 275800 Fax 01384 275810 Email [email protected] Website eltafans.com6
AccessoriesAVIO
Single Phase
ProductCode
External Gravity Shutter Extract Valve Jubilee Clip Mounting Foot
PVC Flexible Duct 1m
AVIO 100 410-SE100 410-MW104 410-EKC264 410-AVIO100-MF 410-P0032/102/35
AVIO 125 410-SE125 410-MW124 410-EKC611 410-AVIO125-MF 410-P0032/133/35
AVIO 150 410-SE150 410-MW154 410-EKC674 410-AVIO150-MF 410-P0032/152/35
AC
Elta Fans Limited has a policy of continuous product development and improvement and therefore reserves the right to supply products which may differ from those illustrated and described in this publication. Confirmation of dimensions and data will be supplied on request. 7
Accessories
EXTERNAL GRAVITY SHUTTER
Dimensions are in mm.
Product Code A B
410-SE100 164 20
410-SE125 184 20
410-SE150 210 20
External gravity shutter, made of high quality ABS, shock-proof and UV resistant, RAL9010.
Recommended for installation in combination with fans without shutters. The shutters open automatically when the air flows through. When the fan is off, they close to prevent air flowing back from outside.
A� B
Tel 01384 275800 Fax 01384 275810 Email [email protected] Website eltafans.com8
• Available in white epoxy powder finish• 4 Standard sizes 100mm, 125mm, 150mm and 200mm• Valves supplied with a mounting ring for fixing• Suitable for wall, ceiling or duct applications
AccessoriesEXTRACT VALVE
idealair extract air valves offer an efficient way of extracting air, combining excellent performance characteristics and a stylish design for most commercial, industrial and residential ventilation applications.
ConstructionThe extract valve is manufactured from white epoxy powder coated steel. The valve is fully adjustable and has a locking nut to fix the position of the control disc upon commissioning.
Fixing Supplied complete with a separate plated mounting ring (pre-punched holes) to secure the valve either in a wall, ceiling or duct mounted application.
FinishGloss white (Standard).
Size RangeExtract valves are available in 4 standard sizes, 100mm, 125mm, 150mm, and 200mm.
Elta Fans Limited has a policy of continuous product development and improvement and therefore reserves the right to supply products which may differ from those illustrated and described in this publication. Confirmation of dimensions and data will be supplied on request. 9
Performance Range CurvesEXTRACT VALVE
Pressure losses with control disc 10mm open.
410-MW104
410-MW154
410-MW124
Air Flowrate (l/s)
Pres
sure
Los
s Pa
scal
s (P
a)
1000
900
800
700
600
500
400
300
200
100
00 20 40 60 80 100 120
Air Flowrate (l/s)
Pres
sure
Los
s Pa
scal
s (P
a)
400
300
200
100
0
0 100 200
Air Flowrate (l/s)
Pres
sure
Los
s Pa
scal
s (P
a)
450
400
350
300
250
200
150
100
50
00 50 100 150
Tel 01384 275800 Fax 01384 275810 Email [email protected] Website eltafans.com10
Dimensional DataEXTRACT VALVE
Dimensions are in mm.
410-MW104
410-MW154
410-MW124Ø1
38
Ø74
138
32
40 44
36
163
Ø98.3
Ø163
51
38.5
Ø20
1
Ø119Ø
202
Elta Fans Limited has a policy of continuous product development and improvement and therefore reserves the right to supply products which may differ from those illustrated and described in this publication. Confirmation of dimensions and data will be supplied on request. 11
Accessories
JUBILEECLIP
Product Code A Min Max
410-EKC264 100 100 110
410-EKC611 125 120 140
410-EKC674 150 140 160
• Metal hose joining clip
• This clip can be used to connect flexible duct to fans and duct fittings
• Perfectly suited for ducting your Arco bathroom extractor fan and Avio inline fans
Dimensions are in mm.
A (REF)
Tel 01384 275800 Fax 01384 275810 Email [email protected] Website eltafans.com12
Accessories
MOUNTINGFOOT
Product Code A B C
410-AVIO100-MF 115 25 19
410-AVIO125-MF 165 25 28
410-AVIO150-MF 165 25 28
Mounting foot for use with the Avio Inline Axial Fan. Made of hiqh quality ABS, shock-proof and UV resistant, RAL9010.
Dimensions are in mm.
A B
C
Elta Fans Limited has a policy of continuous product development and improvement and therefore reserves the right to supply products which may differ from those illustrated and described in this publication. Confirmation of dimensions and data will be supplied on request. 13
Accessories
PVC FLEXIBLE DUCT 1M
Product Code Fan Dia.
410-P0032/102/35 100
410-P0032/133/35 125
410-P0032/152/35 150
• White flexible PVC duct manufactured with a lightweight wire spiral reinforcement
• 1 metre in length
• Suitable for use with small extractor fans requiring low ventilation rates
• Used for short runs where rigid duct is not suitable
• Made in the UK using high-quality PVC Material. Max / Min Temperature: +70°c / -5°c
Dimensions are in mm.
Tel 01384 275800 Fax 01384 275810 Email [email protected] Website eltafans.com14
AVIONotes
Elta Fans Limited has a policy of continuous product development and improvement and therefore reserves the right to supply products which may differ from those illustrated and described in this publication. Confirmation of dimensions and data will be supplied on request. 15
AVIONotes
AVIO-03-2018 Issue A
eltafans.com
Tel +44 (0) 1384 275800Fax +44 (0) 1384 275810Email [email protected]
46 Third Avenue, Pensnett Trading Estate, Kingswinford, West Midlands, DY6 7US United Kingdom
Tel +44 (0) 1489 566500Fax +44 (0) 1489 566555Email [email protected] / [email protected]
17 Barnes Wallis Road, Segensworth East Industrial Estate, Fareham, Hampshire, PO15 5ST United Kingdom
BS EN ISO 9001:2015 FM 556465
A member ofHEVAC ASSOCIATION
Applied Technology & Building Services Export
Building Services