AUXILIARY DEVICES - Siemens€¦ · Input/Output: Class 2, Enclosure Type 4 (indoor or outdoor) for 3RG9001, 3RG9008, 3RG9010, 3RG9030. Input/Output: Class 2, open type for 3RG9002,

Issued to: SIEMENS AG I IA CE CP R&D-VI 4

WERNER-VON-SIEMENS-STRASSE 48 92220 AMBERG GERMANY

This is to certify that representative samples of

AUXILIARY DEVICES

Auxiliary Devices, AS-Interface AS-I Cat. No. 3RG9 followed by 0 followed by 0, 1, 2, 3, 4 followed by 0, 1, 4, 5 or 8 followed by 0 followed by AA, AB, AC, AD, AE, AF, AG, AH, AJ, AK, AL, AM, CB, CC, DA, DB, DC, DE, SB or SC followed by 00. Auxiliary Device, Repeater Type 6GK1210-0SA00. Auxiliary Device, Extender 6GK1210-1SA00.

Have been investigated by Underwriters Laboratories in accordance with the Standard(s) indicated on this Certificate.

Standard(s) for Safety: Industrial Control Equipment - UL508 and CSA C22.2 No. 14

Additional Information: See UL On-line Certification Directory at WWW.UL.COM for additional information.

Certificate Number 20111220-E44653 Page 2 of 4 Report Reference E44653-19950908 Issue Date 2011-DECEMBER-20

William R. Carney Director, North American Certification Programs Underwriters Laboratories Inc. Any information and documentation involving UL Mark services are provided on behalf of Underwriters Laboratories Inc. (UL) or any authorized licensee of UL.

For questions, please contact a local UL Customer Service Representative at http://www.ul.com/global/eng/pages/corporate/contactus

This is to certify that representative samples of the product as specified on this certificate were tested according to the current UL requirements. GENERAL: The AS-Interface is a Single-Master-System. There is only one master per cable wire, which controls data exchange. It calls up all the slaves sequentially and awaits their responses. This device can have a maximum of 4 inputs and 4 outputs, 16 input or it can be used with no inputs or outputs simply to send or receive information from more than one location. Other Listed equipment such as proximity switches, position switches, PLC's and contactors can use the AS-Interface system. RATINGS: Input/Output: Class 2, Enclosure Type 4 (indoor or outdoor) for 3RG9001, 3RG9008, 3RG9010, 3RG9030. Input/Output: Class 2, open type for 3RG9002, 3RG9004 or 3RG9005.




NOMENCLATURE BREAKDOWN 3RG9 Series 3RG9 0 0 1 - 0 AA 00

I II III IV - V VI VII I - Basic Type 3RG9 II - Manufacturer's Identification III - Technical of connection (lower case) 0 - Without lower case 1 - Flat-cable 2 - Kind of connection 3 - Kind of configuration 4 - Kind of configuration IV - Technical of connection (upper case) 0 - Without upper case 1 - Slave connection with M12 connector 2 - Screw terminal 4 - Mode for connection "COMBICON" (open type) 5 - Solder terminal 8 - No connection for slaves V - Free Number 0 - Manufacturer's identification




VI - Electrical data (upper case) AA - 4 input (100 mA) AB - 4 output (Relays) AC - 2 input/2 output (Relays) AD - 4 AS-I distributor (passive) AE - 2 by 2 Input (100 mA) AF - Monitoring Module AG - 4 input (200 mA) AH - 2 by 2 input (200 mA) or 4 input/4 output AJ - Repeater Module AK - 2 by 2 input (200 mA) AL - 4 output (auxiliary voltage supply for output, 24 V dc with M12 connector) AM - 2 input/2 output (auxiliary voltage supply for output, 24 V dc with M12

connector) CB - 4 output (auxiliary voltage supply for output, 24 V dc) CC - 2 input/2 output (auxiliary voltage supply for output, 24 V dc) DA - 4 input/4 output (2 A) DB - 4 input/4 output (1 A) DC - 4 input/4 output (2 A, auxiliary voltage supply for output, 24 V dc with M12

connector) DE - 16 input (150 mA) SB - 4 input/4 output, 100 mA (without auxiliary voltage supply) SC - 4 input/4 output (2 A, auxiliary voltage supply for output, 24 V dc) VII - Additional manufacturer's identification. 00 - Siemen Version.

Documents

AUXILIARY DEVICES - Siemens€¦ · Input/Output: Class 2, Enclosure Type 4 (indoor or outdoor) for 3RG9001, 3RG9008, 3RG9010, 3RG9030. Input/Output: Class 2, open type for 3RG9002,