Audi 2G system for A6L，A8，Q71. This interface is suitable for Audi A6L, A8, Q7 cars,2. it can insert RGB and AV signals onto Audi original screens.3. With the MMI bus to IR signal converter inside, this interface can also control

DVD/DVBT operations based on the MMI knob operation.[optional function]4. With FM transmittion, when you set the originao Radio channel FM87.9, then you

can hear the AUX sound from the car original speaker.

Connection:

LVDS connector to Original CD Original LVDS connector (unplug

LVDS Input Slot from Original NAVI CD)to Video

Interface

Power cable: RGB Cable:1.RED: RED input

1. RED: +12V 2.Green: G input

2. Black: Ground 3.Blue: Blue input

3. Green: +12V rear camera 4.White: Synch

For connecting Backwords light power 5.Black: GND

4. White: the switching cable for connecting

Original MMI cable the 16thMMI in car.

Toggle Switch:

It is connect to side of the interface

Press the button: RGB-AV1-AV2-Original

Power Connector (+12V-+24V

DIP SET

RGB IN AV1 IN

AV2 IN

AV out & Rear Camera In

FM Antenna FM87.9

DIP SETING:

DIP Funtion Down UP1 RGB ON OFF2 AV1 ON OFF3 AV2 ON OFF4 After market camera ON OFF5 Aftrer market camera ON OFF

Original camera OFF ON6 After market GPS ON OFF

Original GPS OFF ON7 EMPTY8888 EMPTY

NoteNoteNoteNote：PleasePleasePleasePlease dodododo notnotnotnot setsetsetset allallallall DIPDIPDIPDIP switchesswitchesswitchesswitches totototo UP,UP,UP,UP, thatthatthatthat isisisis closingclosingclosingclosingthethethethe interfaceinterfaceinterfaceinterface functions.functions.functions.functions.

（3) MMI wire connection

MMI wire is the 16th pin inside the 20PIN connector from the car computer，this box

needs the signal of this wire for switching and control.

The MMI signal location.

（4) Three button on Interface:

with the 3 keys on side, the user can adjust the following

parameters：

Brightness，Contrast, Color：these are picture tuning parameters.

NAVI IR：Navigation type connected to the interface

DVD IR: DVD type connected to the MMI.

TUNER IR： Tuner type connected to the MMI.

(5). Packing List:

Video Interface X1 LVDS Cable X1 Avout& camera in cable X1

AV input cable X1 Power Cable X1 RGB Cable X1

1.RED: +12V power 1. RED: RED input

2.Black: Ground 2. Green: G input

3.Green: rear camera+12V 3. Blue: B input

For connecting backwords Light 4. White: Synch

4.White: switching cable for connecting 5. Black: GND

Original MMI cable 16th PINS in car.

Toggle Switcher cable X1