ATN Series Multiservice Access Equipment Specification

All Rights Reserved

ATN Series Multiservice Access Equipment Specification

Properties ATN 910 ATN 950

Capacity Switch capacity:13Gbps

Forwarding capacity:9.75Mpps

Switch capacity:16Gbps

Forwarding capacity:12Mpps

Slots 1 for CXP and 2 for interface boards 2 for CXP and 6 for interface boards

Dimension

(WDH)

442mm220mm44.45mm 442mm220mm88.9mm

Height (U) 1U 2U

Typical

Power

consumption

50W 95W

Weight 4.8kg 8.42kg

Interface type GE/FE,Smart E1,T1 ,xDSL

L2 feature Support IEEE802.1q, IEEE802.1p, IEEE 802.3ad IEEE 802.1ab;

Support STP/RSTP/MSTP,RRPP,and VLAN Switch

L3 feature Support OSPFv2,RIPv2,and IS-IS,BGPv4,static routing protocols

Support dynamic ARP and static ARP table entries

Support VLAN IF interface

MPLS feature Support LDP,RSVP-TE

Support L2VPN(VPLS/H-VPLS/VLL)

Support MPLS/BGP L3VPN

Support MPLS-TP OAM

QoS Support HQoS

Network

Reliability

Support GR

Support LSP1:1,PW Redundancy,IP/LDP FRR,TE FRR,VPN FRR

Clock Support 1588v2,1588 ACR,E1/T1 Line Clock,synchronous Ethernet clock

Temperature -20C to +60C

Humidity Long term: 5% RH to 85% RH, non-condensing

Short term: 0% RH to 95% RH, non-condensing