A*STAR Institute of Microelectronics Singapore listing... · • the area-wide connection of production equipment camLine Pte Ltd is a subsidiary of camLine ... Marina Bay Sands Expo

6 -7 October | Marina Bay Sands Expo & Convention Centre | Peony Ballroom [Level 4]

A*STAR Institute of Microelectronics Singapore https://www.a-star.edu.sg/ime/

Booth 16

Company’s Profile:

The Institute of Microelectronics (IME) is a research institute of the Science and Engineering Research Council of the Agency for Science, Technology and Research (A*STAR). Positioned to bridge the R&D between academia and industry, IME's mission is to add value to Singapore's semiconductor industry by developing strategic competencies, innovative technologies and intellectual property; enabling enterprises to be technologically competitive; and cultivating a technology talent pool to inject new knowledge to the industry. IME has built strong capabilities in integrated circuits design, advanced packaging, bioelectronics and miniaturized medical devices, MEMS, nano-electronics and photonics. Other research interests include lithography, through-silicon via/interposers and rugged electronics.

In addition to its research capabilities, IME also offers a broad range of services to the industry to meet the R&D needs of the semiconductor industry and related industries. Among the services offered are multiple-projects-wafer prototyping and silicon wafer fabrication on IME’s 200mm/300mm state-of-the-art manufacturing facilities. IME is an ISO 9001 and ISO 13485 certified organisation. Website: http://www.a-star.edu.sg/ime/

http://www.a-star.edu.sg/ime/


aNexus Singapore http://www.anexuscorp.com/

Booth 5, 6, 7


aNexus is the only established distributor, service provider and application center for functional material and technologies, including inkjet, coating, printing, photonic curing, nano imprint, graphene roll to roll and other advance technologies from research to production in Asia. Besides providing turnkey solutions, our line of products includes the leaders in respective field for printer, coater, flash lamp sintering systems, inks, etc., i.e. Fujifilm Dimatix, Coatema, Aixtron, Xenon, ImageXpert and many more. FUJIFILM Dimatix, Inc. is the world’s leading supplier of drop-on-demand inkjet printheads and systems. The company’s innovative inkjet technology and world class fabrication techniques enable OEMs, system integrators and manufacturers to build cutting-edge systems and manufacturing processes for high performance, precision printing of traditional inks and deposition of functional fluids on all types of surfaces, including flexible substrates. For almost 40 years, Coatema Coating Machinery GmbH portfolio ranges from small lab coating units and pilot plants for realization of even small batches up to production plants for advance applications. All lab units for small test series as well as production lines for large-scale work are manufactured to individual product and customer requirements. After printing and coating, photonic curing the materials with Xenon Corporation Pulsed UV technology have many technical advantages. Xenon Corporation have more than 50 years of experience on industrial production lines worldwide, and we had created a global network of PE Test Centers that allow researchers and product developers to access. For more information, please visit www.anexuscorp.com

http://www.anexuscorp.com/


camLine Singapore http://www.camline.com

Booth 22


camLine’s mission is to provide the highest quality software solutions for factory automation and logistics, helping global manufacturers maintain their competitive edges and sustaining revenues; at the same time, meeting needs and creating values for their customers through continuous quality improvement. camLine QM system is certified according to DIN EN ISO 9001:2008.

As an IT solutions provider, camLine provides excellent technological development and leadership in software, offering excellent professional support and valuable experiences in the production processes across the entire supply chain, thereby enhancing and value-adding to the manufacturers’ productivity, effectiveness and efficiency of their executions.

In particular, camLine is specialized in: • designing and implementing individualized software solutions; • consulting, training and multi-tier support in different time-zones; • the area-wide connection of production equipment

camLine Pte Ltd is a subsidiary of camLine GmbH, Germany.


CLEAN SYSTEMS Technology (S) Pte Ltd Singapore http://www.csclean.com/

Booth 20


EXHAUST GAS ABATEMENT FOR SEMICONDUCTOR AND OTHER HIGH-TECH MANUFACTURING INDUSTRIES Safety and The Environment… For CS CLEAN SOLUTIONS, environmental protection is the essence of our business. Our eco-friendly CLEANSORB technology safely removes hazardous waste gases without consuming energy, water or fuel. There are no secondary emissions to the environment in the form of waste water or NOx. Moreover, all of our products are designed for lifetime serviceability and re-use.


Coatema Coating Machinery GmbH / aNexus Singapore http://www.anexuscorp.com/

Booth 5, 6, 7


For almost 40 years, Coatema Coating Machinery GmbH portfolio ranges from small lab coating units and pilot plants for realization of even small batches up to production plants for advance applications. All lab units for small test series as well as production lines for large-scale work are manufactured to individual product and customer requirements. aNexus is the only established distributor, service provider and application center for functional material and technologies, including inkjet, coating, printing, photonic curing, nano imprint, graphene roll to roll and other advance technologies from research to production in Asia. Besides providing turnkey solutions, our line of products includes the leaders in respective field for printer, coater, flash lamp sintering systems, inks, etc., i.e. Fujifilm Dimatix, Coatema, Aixtron, Xenon, ImageXpert and many more. For more information, please visit www.anexuscorp.com



Crest Innovation (S) Pte Ltd Singapore http://www. www.crest-group.net/

Booth 18


Crest was founded in 1999 specialising in optical microscopy, microfocus x-ray inspection system and failure analysis solution provider. Since its inception, Crest Group of companies has grown to a team of more than 110 employees with a strong regional reputation of having the largest technical support group in South East Asia specializing in advance microscopy imaging and complex analytical x-ray solutions. Together with our global key partners, Crest strives to provide our customers market leading technological solutions in enabling important discoveries, enhancing imaging and analytical capabilities as well as helping to achieve higher productivity.


EV Group (EVG) Austria http://www.EVGroup.com/

Booth 17


EV Group (EVG) is a leading supplier of equipment and process solutions for the manufacture of semiconductors, microelectromechanical systems (MEMS), compound semiconductors, power devices and nanotechnology devices. Key products include wafer bonding, thin-wafer processing, lithography/nanoimprint lithography (NIL) and metrology equipment, as well as photoresist coaters, cleaners and inspection systems. Founded in 1980, EV Group services and supports and elaborate network of global customers and partners all over the world. More information about EVG is available at www.EVGroup.com.


Fujifilm Dimatix Inc. / aNexus Singapore http://www.anexuscorp.com/

Booth 5, 6, 7


FUJIFILM Dimatix, Inc. is the world’s leading supplier of drop-on-demand inkjet printheads and systems. The company’s innovative inkjet technology and world class fabrication techniques enable OEMs, system integrators and manufacturers to build cutting-edge systems and manufacturing processes for high performance, precision printing of traditional inks and deposition of functional fluids on all types of surfaces, including flexible substrates. aNexus is the only established distributor, service provider and application center for functional material and technologies, including inkjet, coating, printing, photonic curing, nano imprint, graphene roll to roll and other advance technologies from research to production in Asia. Besides providing turnkey solutions, our line of products includes the leaders in respective field for printer, coater, flash lamp sintering systems, inks, etc., i.e. Fujifilm Dimatix, Coatema, Aixtron, Xenon, ImageXpert and many more. For more information, please visit www.anexuscorp.com



InnoLas Semiconductor GmbH Germany

http://www.innolas-semiconductor.com/

Booth 25


InnoLas Semiconductor GmbH is a Germany-based leading manufacturer of high quality Wafer ID Laser Marker and Wafer Sorter for the Semiconductor, Compound and LED Industries. Our products offer solutions for the following applications:

- Debris-free Soft Marking and High-roundness Hard Marking - Optimized process for marking on Si, Sapphire, GaN, GaAs, InP, Ge, SiC, GaP,

Quartz, Glass and many other materials. - 2” to 200mm, 300mm and 450mm wafer size models are available

- Wafer sorting by wafer ID (standard) - Wafer sorting by wafer thickness (at CMP, backgrind process) - Wafer sorting by wafer weight (at etching process) - Wafer sorting by defect inspection (at various inspection processes) - 2” to 200mm, 300mm and 450mm wafer size models are available.

For more information, please visit innolas-semiconductor.com for more information.


Nanyang Technological University (NTU) Singapore http://www.ntu.edu.sg

Booth 01


Researchers at VIRTUS, IC Design Centre of Excellence, Nanyang Technological University (NTU) have developed a novel Fully-Additive printing process, involving depositions-only (no subtractions/lift-off), for realizing printed full-electronics (active and passive components) circuits/systems on flexible plastic films. Our process is Green, On-Demand (quick-to-print), Scalable (large-format printing) and Low-Cost. Our Fully-Additive process features printed transistors with high (~1.5cm²/Vs) semiconductor carrier-mobility (~3x higher than competing state-of-the-art Fully-Additive processes) and the lowest variations – both parameters are comparable to the substantially more expensive Subtractive processes. Further our process is All-Air Processed and Low-Temperature, allowing for printing on low cost temperature-sensitive substrates/films. The potential applications include smart wallpapers, medical devices, and sensors.

About VIRTUS: VIRTUS is an IC Design Centre of Excellence jointly funded by NTU and the Singapore Economic Development Board (EDB), is a world-class IC/SoC design house, developing key technologies required to design IC and SoCs for a myriad of applications, including medical technology, clean technology, aerospace/satellite, consumer electronics, etc.


NovaCentrix Austin, USA http://www.novacentrix.com/

Booth 13 and 14


NovaCentrix offers industry leading photonic curing tools, material and expertise enabling development and production of next generation printed electronic devices – some already on the market. PulseForge® tools utilize photonic curing which is a cutting edge technology that dries, sinters, and anneals functional inks in milliseconds on low-temperature, flexible substrates such as paper and plastic.


Omron Electronics Pte Ltd Singapore http://www.omron-ap.com.sg/

Booth 3

Company’s Profile: OMRON Industrial Automation is one of the global leading advanced automation solution providers with cutting edge technology to manufacturing industries. We deliver benefits of information technology using standard open networks to customers for quick response to the ever-evolving technology and we further strive to meet the changes in technology including IoT, AI, and robotics and support customers to produce high value-added and competitive products through manufacturing site innovation. Omron help customers innovate manufacturing by linking factory automation with Information and Communications Technology thus making production equipment smarter with addition of various information and communication functions to our products by enabling our products to be connectable to various networks. As manufacturing industries accelerate their shifts to high-mix low-volume production, Omron’s unique seamless integration of Robot and Machine Control architecture addresses the challenges in rapid production line changeover. For manufacturers with multiple production sites on a global scale, there is growing demand for adopting IoT to production lines and equipment in order to improve operation rates of production equipment and to produce high quality products stably. In supporting this Industrial IoT application, OMRON further develop autonomous devices that monitor their own status and to notify alarm before failure to realize predictive maintenance and to support remote access during equipment troubleshooting and recovery.


Omron Healthcare Singapore Pte Ltd Singapore http://www.omronhealthcare-ap.com/sg/

Booth 4


About OMRON Healthcare With its HQ in Kyoto, Japan, Omron Healthcare Co. develops and manufactures health equipment for home and medical use, health management software and health promotion services. In seeking to realize a society where people can enjoy healthy and comfortable lives, Omron Healthcare believes that promoting the prevention of lifestyle diseases is one of the primary objectives. Towards this goal, Omron Healthcare establishes the value of "Healthcare @ Home". "Healthcare @ Home." It connects home and clinical practice with the day-to-day health information measured at home in order to prevent lifestyle diseases and monitor effects of the treatment. By looking beyond technology, our real commitment lies in helping people to lead healthy lives. Omron's wide range of home healthcare products includes Blood Pressure Monitors, Thermometers, Nebulizers, Body Fat Analyzers, Step Counters and Pulse Massagers. We achieved more than 200 million units of Blood Pressure Monitors sold worldwide, making us the global leader in Digital Blood Pressure Monitor. Our professional category includes portable ECG Monitor, Non-invasive Vascular Screening Device, and Professional Blood Pressure Monitors. With the mission to help realize a healthy and comfortable life for people around the world, Omron Healthcare continuously strives to create high quality products and provide them globally.


Qdos Technology Sdn Bhd Malaysia http://www.qdos.com.my/

Booth 19

Company’s Profile: Established in 1994, Qdos is a pioneer manufacturer of Flexible Printed Circuits (FPC) in Malaysia. Equipped with highly automated state-of-the-art facilities, Qdos provides a comprehensive FPC solution, covering circuit design, prototype fabrication, mass-production and SMT assembly. As a reliable partner and world-class manufacturer, Qdos is certified with ISO9001, ISO/TS16949, ISO14001, Sony Green Partnership and Canon Green Procurement.

Our Quality, Delivery and Outstanding Service are the pillars that form the foundation

of Qdos Flexcircuits today. Qdos is a proud appointed vendor to telecommunications, automotive, consumer electronics, military and aerospace customers in more than 20 countries including the United States, Germany and Japan.


Singapore Institute of Manufacturing Technology (SIMTech) Singapore http://www.a-star.edu.sg/simtech/

Booth 10, 11, 12


The SIMTech Large Area Processing (LAP ) is established by the Singapore Institute of Manufacturing Technology (SIMTech) to spearhead innovations in value creation of roll to roll manufacturing of functional film and printed electronics , and to provide design, prototyping, and production services for printed electronics products The LAP foundry has a pilot production line with robust processes to ensure unparalleled quality and value for your manufacturing needs. Our core manufacturing capabilities span the complete roll to roll manufacturing process, from structuring, printing , slot die coating , sintering and web inspection . In this Flex-SEA event, SIMTech and its collaborative industry partners showcase exhibits in :

- Printed lighting that can be applied for illuminated advertisements, interior design and building façade lighting

- Printed hybrid circuitry and touch for consumer electronics, smart-packaging and automotive application

- Printed transparent conductive film - Printed energy devices such as printed batteries electrode and printed

photovoltaics


TDC / ITE College Central Singapore http://www.ite.edu.sg/

Booth 2


TDC@Central (Technology Development Centre) is one of Singapore’s leading R&D facility known for its multidisciplinary and practical approach to today’s product and engineering needs. TDC occupies a total floor area of about 2,400 square metres, housing over S$10m in R&D and engineering equipment. Its expertise includes: 1) IT & Embedded 2) Microelectronics Packaging & Assembly 3) Materials Development 4) Systems Integration & Prototyping 5) Business Development


TIBCO Software Inc. Singapore http://www.tibco.com

Booth 26


TIBCO Software takes businesses to their digital destinations by interconnecting

everything in real time and providing augmented intelligence for everyone, from

business users to data scientists. This combination delivers faster answers, better

decisions, and smarter actions. For nearly 20 years, thousands of businesses around

the globe have relied on TIBCO technology to differentiate themselves through

compelling customer experiences, optimized assets, and innovative new business

models. Learn how TIBCO brings data alive at www.tibco.com.

http://www.tibco.com/

http://www.tibco.com/


UCT Addictive Manufacturing Center Pte Ltd Singapore http://www.3dprinting.uct.com/

Booth 23


UCT Addictive Manufacturing Center Singapore, a division of UCT (Nasdaq: UCTT) launched the largest 3D printing facility in Southeast Asia in 2015, leveraging on the extensive traditional manufacturing experience of the company. The UCT Addictive Manufacturing Center has numerous types of 3D printing technologies that allow us to print in metal, plastic, resin, wax and sandstone. We are offering a unique portfolio of additive manufacturing solutions enabling our industrial customers to benefit from the forefront of technology. Come visit us at Booth #23 for the ASTC/FLEX SEA 2016 event where our consultants will share with you 3D printed complex industrial parts that are impossible to manufacture using traditional method.


Xenon Corporation / aNexus Singapore http://www.anexuscorp.com/

Booth 5, 6, 7


After printing and coating, photonic curing the materials with Xenon Corporation Pulsed UV technology have many technical advantages. Xenon Corporation have more than 50 years of experience on industrial production lines worldwide, and we had created a global network of PE Test Centers that allow researchers and product developers to access. aNexus is the only established distributor, service provider and application center for functional material and technologies, including inkjet, coating, printing, photonic curing, nano imprint, graphene roll to roll and other advance technologies from research to production in Asia. Besides providing turnkey solutions, our line of products includes the leaders in respective field for printer, coater, flash lamp sintering systems, inks, etc., i.e. Fujifilm Dimatix, Coatema, Aixtron, Xenon, ImageXpert and many more. For more information, please visit www.anexuscorp.com


Documents

A*STAR Institute of Microelectronics Singapore listing... · • the area-wide connection of production equipment camLine Pte Ltd is a subsidiary of camLine ... Marina Bay Sands Expo