ARIX Volar Distal Radius Locking Plate System · 2017. 8. 9. · Volar Distal Radius Locking Plate Left, Standard, Length 46mm, 9 Holes, Thickness 1.8mm, Blue 25-DVRA-109-R Volar

1

ARIX Volar Distal Radius Locking Plate System

WRIST SYSTEM

2

ARIX WRIST SYSTEM

Table of Contents

Indications

Product Overview

Features & Benefits

Ordering Information - Screws

2.5mm Self-Tapping Cortical Screws (Non-Locking)

2.5mm Self-Tapping Locking Screws

Ordering Information - Plates

ARIX Volar Distal Radius Plates

Ordering Information - Instruments

Set Configuration Suggestion

3

4

7

14

15

16

19

21

3


Indications

ARIX Volar Distal Radius Locking Plate System is intended for use in temporary internal fixation and

stabilization of fractures, osteotomies, and non-unions of the distal radius.

4

ARIX WRIST SYSTEM

Screws : Silver

Plates : Blue

Product Overview

Screw Specifications

Screw TypesOuter

DiameterLength Insertion Types

Screw Head Recess

Color Material

Locking ScrewØ2.5mm 8 ~30mm Self-Tapping Hexagonal Silver Titanium

AlloyCortical Screw(Non-Locking)

Distal Head Types Thickness Length Holes on the shaft Color Material Guide Pin Hole

Standard1.8mm 46mm and

73mm2 holes and

4 holes Blue Pure Titanium Gr.4 Ø1.3mmLarge

Plate Specifications

Color Coding

All plates are made from pure titanium material in conformity with ASTM F67.

All screws are made from titanium alloy material in conformity with ASTM F136.

The titanium is an ideal material for implant.

It is biocompatible, corrosion resistant, and non-toxic in biological environment.

Materials of Implants

5


Self-retaining Hexagonal Recess for connection between Screw Head and Screwdriver Shaft

Product Overview

Screw Head Recess

Screw Options

Self-tapping Locking Screws : 8mm ~ 30mm

Self-tapping Cortical Screws(Non-Locking) : 8mm ~ 30mm

Outer Diameter : 2.5mm

Locking ScrewCortical Screw(Non-Locking)

6

ARIX WRIST SYSTEM

8 Volar Distal Radius Plates for left and right radiuses.

2 types of Distal Head as Standard and Large

2 types of Shaft Length as 2 and 4 locking holes on the shaft

Product Overview

Plate Options

Standard Standard StandardLarge LargeLarge Large

7


Features and Benef its

Anatomical Volar Plate

Anatomical plate contour and screw trajectories for maximum support of

lunate facet and stable fixation of radial styloid

Radial styloid fragmentLunate facet

Minimal soft tissue irritation

Rounded plate edges to minimize soft tissue irritation

Rounded screw head design and minimal screw head prominence in the plate

to reduce the potential for soft tissue irritation.

Low overall profile of the plate and screw construct for minimal soft tissue irritation.

Minimal screw head prominence Rounded screw head

Low overall profile

Anatomical 4 plane cutting for less soft tissue irritation

Rounded plate edges

8

ARIX WRIST SYSTEM


Poly-Axial Locking System

Benefits of Locking Plating System

The poly-axial hole of a plate accepts locking or cortical screws as surgical needs.

Locking screws as well as cortical screws can be inserted in ±10° with respect to

the plate in any direction.

Locking plate and screw system provides more stable fixation than conventional plate and screw system.

Locking screws will not loosen from the plate during the healing process.

Locking screws do not rely on bone to plate compression. A fixed angle construct can be created by using

locking screws in osteopenic bone or multifragmentary fractures where secure bone purchase with conventional

screws may be compromised.

10 °

9



Oblong hole for accurate plate positioning

Easy Plate Identification

Distal head size information such as standard or large and plate type information

such as left or right are marked on plates for easy plate identification.

The oblong hole in the plate shaft allows distal or proximal adjustment for accurate

plate positioning on the bone. 1mm increment lines are marked

beside oblong hole as a reference for plate positioning.

Distal Head Size

Left of Right type

10

ARIX WRIST SYSTEM


Guide Pin holes for temporary plate fixation

The Guide Pin holes of a plate accept up to 1.2mm Guide Pin.

Guide Pin can be placed for temporary maintenance

of bone reduction and provisional plate fixation.

Intraoperative simplicity in choosing screws

2.5mm locking and cortical screws can be used in any holes of a plate

for intraoperative simplicity

Guide Pin holes to approximate the trajectories of the distal screws

with respect to radiocarpal joint

Guide Pin to approximate the trajectories of the ulna

screws with respect to DRUJ

Guide Pin holes for provisional fixation of plate.

2.5mm 2.5mm

11


Drill Guide Block

The drill guide block enables insertion of screws in the nominal trajectory of each locking hole.

Works with scaled drill guide of the variable angle drill guide(111-080)

Total 4 models in standard and large sizes for left and right plates.

The drill guide blocks are made from radiolucent material

Fixed angle screw trajectories by drill guide block[ Large size for right radius ]

Fixed angle screw trajectories by drill guide block[ Standard size for right radius ]

Distal 10° Radial 10°

Proximal 5°Ulnar 3°

Proximal 5°Radial 2°

Proximal 5° Ulnar 2°


Distal 10° Ulnar1°



Ulnar side Radial side

Distal 10° Radial 10°Proximal 5°

Radial 0°

Proximal 5°Radial 2°

Proximal 5° Radial 2°


Distal 5° Radial 2° Distal 5°

Radial 1.5°

Ulnar side Radial side

12

ARIX WRIST SYSTEM

Variable Angle Drill Guide

Fixed Angle Drill Sleeve

Helps to drill a pilot hole within the poly-axial range of ±10°.

Scales are marked on drill guide and drill bit for prompt depth measurement of

a pilot hole without the need of depth gauge.

The fixed angle drill sleeve helps to drill a hole in the nominal trajectory of each locking hole.

Scales are marked for prompt depth measurement of a pilot hole.


10°

10°

13


Determine the optimal screw length with the depth gauge.

The triangular-prism shaped scale of depth gauge

shows the exact length in any direction.

Depth Gauge

Plate Bender

If necessary, bend distal radius plate to suit the patients’

anatomical conditions using a pair of plate benders.

With the plate benders, hold & bend the plate around the center window.

Do Not bend the plate more than 5°.

Further or Repetitive bending may break the plate.


* 3 scales for ease of reading

14

ARIX WRIST SYSTEM


2.5mm Self-Tapping Cortical Screws (Non-Locking)

No. Code Head Diameter (A) Outer Diameter (B) Length (L)

1 25-HF-008

Ø3.7 Ø2.5

8

2 25-HF-010 10

3 25-HF-012 12

4 25-HF-014 14

5 25-HF-016 16

6 25-HF-018 18

7 25-HF-020 20

8 25-HF-022 22

9 25-HF-024 24

10 25-HF-026 26

11 25-HF-028 28

12 25-HF-030 30

A

L

B

[Unit: mm]

15



2.5mm Self-Tapping Locking Screws

No. Code Head Diameter (A) Outer Diameter (B) Length (L)

1 25L-HF-008

Ø3.8 Ø2.5

8

2 25L-HF-010 10

3 25L-HF-012 12

4 25L-HF-014 14

5 25L-HF-016 16

6 25L-HF-018 18

7 25L-HF-020 20

8 25L-HF-022 22

9 25L-HF-024 24

10 25L-HF-026 26

11 25L-HF-028 28

12 25L-HF-030 30

A

L

B

[Unit: mm]

16

ARIX WRIST SYSTEM

25-DVRA-109-L Volar Distal Radius Locking Plate Left, Standard, Length 46mm, 9 Holes, Thickness 1.8mm, Blue

25-DVRA-109-R Volar Distal Radius Locking Plate Right, Standard, Length 46mm, 9 Holes, Thickness 1.8mm, Blue

Ordering Information – Plates

ARIX Volar Distal Radius Plates

25-DVRA-111-L Volar Distal Radius Locking Plate Left, Standard,Length 73mm, 11 Holes, Thickness 1.8mm, Blue

17


25-DVRA-111-R Volar Distal Radius Locking Plate Right, Standard, Length 73mm, 11 Holes, Thickness 1.8mm, Blue

25-DVRA-209-L Volar Distal Radius Locking Plate Left, Large, Length 46mm, 9 Holes, Thickness 1.8mm, Blue


25-DVRA-209-R Volar Distal Radius Locking Plate Right, Large, Length 46mm, 9 Holes, Thickness 1.8mm, Blue

18

ARIX WRIST SYSTEM

25-DVRA-211-L Volar Distal Radius Locking Plate Left, Large, Length 73mm, 11 Holes, Thickness 1.8mm, Blue

25-DVRA-211-R Volar Distal Radius Locking Plate Right, Large, Length 73mm, 11 Holes, Thickness 1.8mm, Blue


19


Ordering Information – Instruments

111-082-LDrill Guide Block, Standard, Left

111-082-RDrill Guide Block, Standard, Right

111-083-LDrill Guide Block, Large, Left

111-083-RDrill Guide Block, Large, Right

113-HF-607Hexagonal Screwdriver Shaft

112-25-301Drill Bit for 2.5mm screws, Ø2.0mm,

Drilling length : 30mm, Overall length : 110mm, J-Latch

111-068-2Guide Pin Ø1.1mm for Ø1.3 Plate hole

111-084Fixed Angle Drill Sleeve

for Ø2.0mm drill bit

20

ARIX WRIST SYSTEM

111-075Depth Gauge for 2.5mm screws

111-080Variable Angle Drill Guide for Ø2.0mm drill bit

BD-05Grasping Forceps

26.0240.17Plate Bender

Ordering Information – Instruments

111-092Screwdriver Handle

112-084ARIX Volar Distal Radius Implant/Instrument Container

21


ARIX WRISTØ2.5 Distal Radius Plate

Set Conf iguration Suggestion

NO Code Description Set Quantity

Implants _ Screws

1 25L-HF-008 2.5 Locking Screw (8mm) 5












13 25-HF-008 2.5 Cortical Screw (8mm) 5












Implants _ Plates

25 25-DVRA-109-R Standard, Length 46mm, Right 3

26 25-DVRA-109-L Standard, Length 46mm, Left 3

27 25-DVRA-111-R Standard, Length 73mm, Right 3

28 25-DVRA-111-L Standard, Length 73mm, Left 3

29 25-DVRA-209-R Large, Length 46mm, Right 3

30 25-DVRA-209-L Large, Length 46mm, Left 3

31 25-DVRA-211-R Large, Length 73mm, Right 3

32 25-DVRA-211-L Large, Length 73mm, Left 3

NO Code Description Set Quantity

Instruments

33 111-092 Screwdriver Handle 2

34 111-075 Depth Gauge 1

35 112-25-301 Drill bit for 2.5mm screws 2

36 111-080 Variable Angle Drill Sleeve for Ø2.0mm drill bit

1

37 111-084 Fixed Angle Drill Sleeve for Ø2.0 drill bit

1

38 BD-05 Grasping Forceps 1

39 113-HF-607 Hexagonal Screwdriver Shaft 2

40 111-068-2 Guide Pin 2

41 111-082-R Drill Guide Block, Standard, Right 1

42 111-082-L Drill Guide Block, Standard, Left 1

43 111-083-R Drill Guide Block, Large, Right 1

44 111-083-L Drill Guide Block, Large, Left 1

45 26.0240.17 Bender 2

22

ARIX WRIST SYSTEM

2.5 Distal Radius Plates and Screws

23


Instruments for 2.5 Distal Radius Plates and Screws

JEIL MEDICAL CORPORATION 702•703•704•705•706•804•805•807•812-ho,

55, Digital-ro34-gil, Guro-gu, Seoul, 152-728, Korea

Tel : 82.2.850.3500 Fax: 82.2.850.3535 www.jeilmed.co.kr

[email protected]

Publication 201501

LBEN-M1601(00)

Documents

ARIX Volar Distal Radius Locking Plate System · 2017. 8. 9. · Volar Distal Radius Locking Plate Left, Standard, Length 46mm, 9 Holes, Thickness 1.8mm, Blue 25-DVRA-109-R Volar