Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
P R O T E C T I O N AT H E I G H T SARC FLASH
www.falltech.com
FallTech® has you covered with Arc Rated products for the four components of a Personal Fall Arrest System (PFAS).
Anchorage Connector – When working in an atmosphere where arc flash is a potential risk, a PFAS is nothing without a tie off, anchorage point. FallTech offers Arc Rated anchorage solutions for these challenging work environments.
BodyWear – FallTech Arc Rated Harnesses were developed specifically to protect workers at heights or in confined spaces where arc flash or arc blast is a possibility. FallTech Arc Rated products are tested to meet the requirements of ANSI, OSHA and ASTM.
Connectors – Connectors are a critical component of the PFAS. FallTech
offers a variety of Arc Rated connectors with Soft Pack energy absorbers and a variety of end connectors.
Devices – FallTech’s Arc Rated Self-Retracting Devices are built for workplaces where you need greater access to distant anchors, greater mobility and short stopping distances, compared to traditional lanyards.
Arc Rated Fall Protection
ANSI Z359.14 Compliant | OSHA CFR1926.502 and CFR1910.66 Compliant | ASTM F887 Compliant
Stands Up To The Harshest Of ConditionsFall Protection is designed to keep workers safe when working near energized electrical sources, where an arc flash or an arc blast is a potential risk. Whether on a scissor lift or bucket truck, FallTech Arc Rated fall protection offers superior durability and also delivers superior protection, reducing work related injuries at heights.
The FallTech Advantage You can work in confidence knowing your FallTech Arc Flash-Rated fall protection products are engineered and manufactured to the highest standards of safety and reliability, complying with OSHA Regulations, ANSI standards and the third party testing of ASTM F887.
FallTech Test AccreditationFallTech’s internal testing lab has met the requirements of the IAS Accreditation Criteria for Testing Laboratories (AC89) and has demonstrated compliance with ISO/IEC Standard 17025:2005.
Arc Rated Fall Protection Designed with You in Mind
8070R
Arc FlashThe Ultimate in Arc Rated Performance
FallTech Arc Rated HarnessesFallTech is known for its comfortable designs in bodywear, and that is why we designed the Arc Rated family of harnesses, to provide protection and long lasting wear. The Arc Rated harness quickly self-extinguishes and prevents melting or dripping, specifically for workers near energized electrical sources, where arc flash or arc blast exposure is present.
FallTech Arc Rated harnesses are ASTM F887 third-party tested to ensure workers are protected from falls, even after an arc flash of 40 cal/cm2.
Arc Flash D-ring Extender with Choke Loop.
PVC Coated Alloy Steel, 18” Length,with heavy-duty 1-3/4” Kevlar Webbing.
8366AF
Arc Flash Nomex Leg Pads for most Arc Flash rated harnesses.
5003AF
Arc Flash Nomex Shoulder Yoke/Pad Assembly.
7004YAF
Paired front torso rescue loops.
Arc Rated Nomex® /Kevlar® blend or Nylon construction.
Super soft edging around the neck, will not chafe for added comfort.
Shoulder pads for all day comfort.
6” torso-sewn waist support pad on the construction-belted harness keeps your tools where you need them.
Extreme duty removable work belt, on selected models, is designed to stay in
position even with tool pouches.
Reduce SRD and lanyard connection time with an upright coated Dorsal D-ring.
Three coated hip D-rings for added protection against arc flash or blast.
Coated or leather insulated hardware throughout.
Visi-Lock quick connect buckles include a green indicator for visual assurance
when connected.
Nomex®/Kevlar®
Harnesses Nomex/Kevlar blend webbing provides exceptional protection against arc flash. Because Kevlar webbing is fire-resistant, the harness will retain its performance qualities in an event of a fall after an arc flash incident.
• Belted and non-belted configurations available.• Coated or leather insulated hardware.• Nomex/Kevlar webbing is fire-resistant and self-extinguishing.• Quick connect attachments available on some configurations.• ANSI Z359.1-2007; Z359.12-2009 • OSHA 1910.269 & 1926.• ASTM F887 tested with fire-resistant (FR) properties.
Bodywear
ITEM# SIZED*3 COATED D-RINGS
BACK & SIDE
QUICK CONNECT LEGS, CHEST,
BELT WITH LEATHER
INSULATIONS
COATED MATING
BUCKLE LEGS, CHEST, BELT
PAIRED FRONT TORSO RESCUE LOOPS
COATED MATING BUCKLE TORSO
ADJUSTERS
SHOULDER, LEGS, &
WAIST PADS
8070R
8070
8073R
8073
* For Sized Harnesses, Add: S for Small; M for Medium; L for Large; or XL for X Large to the end of the item number. Example: 8070RS
Belted Harnesses
ITEM# SIZED*4 COATED D-RINGS
BACK AND SIDEQUICK CONNECT LEGS, CHEST, BELT
WITH LEATHER INSULATIONSCOATED MATING BUCKLE
TORSO ADJUSTERS
8060B UniFit
Crossover Climbing Harnesses
ITEM# SIZED*1 COATED
BACK D-RING
QUICK CONNECT LEGS, CHEST,
BELT WITH LEATHER
INSULATIONS
COATED MATING
BUCKLE LEGS, CHEST, BELT
FRONT D-RING
PAIRED FRONT TORSO RESCUE
LOOPS
COATED MATING
BUCKLE TORSO ADJUSTERS
8076R (No Belt)
8076 UniFit, XL (No Belt)
7047R (No Belt)
7047 UniFit, XL, 2X (No Belt)
7047BFD (No Belt)
* For Sized Harnesses, Add: S for Small; M for Medium; L for Large; or XL for X Large to the end of the item number. Example: 7047RS
Non-Belted Harnesses
www.falltech.com
8076R 7047R8073R
Nylon HarnessesA high-strength nylon option offers excellent arc flash protection and will not melt or drip in the event of an arc flash. This blend of high-strength nylon webbing will retain its performance qualities in the event of a fall after an arc flash incident.
• Belted and non-belted configurations available.• Leather insulated hardware.• Nylon won’t drip or melt in the event of an arc flash.• ANSI Z359.1-2007; Z359.12-2009• OSHA 1910.269 & 1926.• ASTM F887 tested with fire-resistant (FR) properties.
Belted Harnesses
ITEM# SIZED
DORSAL WEB LOOP W/ 2 SIDE D-RINGS
QUICK CONNECT LEGS, CHEST,
BELT W/ LEATHER INSULATIONS
MATING BUCKLE LEGS, CHEST, BEST W/ LEATHER INSULATORS
PAIRED FRONT TORSO
RESCUE LOOPS
MATING BUCKLE TORSO
ADJUSTERS W/ LEATHER INSULATORS
SHOULDER, LEGS, & WAIST PADS
8081R
8081
8084R
8084
* For Sized Harnesses, Add: S for Small; M for Medium; L for Large; or XL for X Large to the end of the item number. Example: 8081RXL
Bodywear
8081 8087 7051
ITEM# SIZEDSINGLE
WEB LOOP
QUICK CONNECT LEGS
& CHEST
MATING BUCKLE LEGS & CHEST
PAIRED FRONT TORSO
RESCUE LOOPS
MATING BUCKLE TORSO
ADJUSTERS W/ LEATHER INSULATORS
8087R_
8087 UniFit
7051R_
7051 UniFit, XL, 2X
* For Sized Harnesses, Add: S for Small; M for Medium; L for Large; or XL for X Large to the end of the item number. Example: 8087L
Non-Belted Harnesses
ITEM# SIZED* 1 COATED BACK D-RING COATED MATING BUCKLE LEGS, CHEST, BELT
7049 UniFit, XL
ITEM# SIZED*4 COATED D-RINGS
BACK & SIDE
COATED MATING BUCKLE LEGS, CHEST, BELT
COATED MATING BUCKLE TORSO ADJUSTERS
SHOULDER, LEGS, & WAIST PADS
8063B UniFit
Crossover Climbing Harness
ITEM# DESCRIPTION SIZE D-RINGS MATERIAL
72493FT 1-3/4” Heavy-duty 3’ Length PVC Coated Steel Kevlar
72494FT 1-3/4” Heavy-duty 4’ Length PVC Coated Steel Kevlar
ITEM# DESCRIPTION LENGTH LEGSHARNESS
CONNECTORSANCHORAGE CONNECTORS
MATERIALS
8209AF Adjustable Restraint Lanyard 4’-6 1-SINGLE 1 Choke Loop 1 Steel Snap Hook Nomex and Kevlar Web
8242L Single Leg Shock Absorbing Lanyard 6’ 1-SINGLE 1 Loop 1 Steel Snap Hook Nomex and Kevlar Web
8242YL Y Leg Shock Absorbing Lanyard 6’ Y-LEG 1 Loop 2 Steel Snap Hooks Nomex and Kevlar Web
82423L Single Leg Shock Absorbing Lanyard 6’ 1-SINGLE 1 Loop 1 Steel Rebar Hook Nomex and Kevlar Web
8242Y3L Y Leg Shock Absorbing Lanyard 6’ Y-LEG 1 Loop 2 Steel Rebar Hooks Nomex and Kevlar Web
8242AF Single Leg Shock Absorbing Lanyard 6’ 1-SINGLE 1 Loop 2 Steel Snap Hooks Nomex and Kevlar Web
8242YAF Y Leg Shock Absorbing Lanyard 6’ Y-LEG 1 Steel Snap Hook 2 Steel Snap Hooks Nomex and Kevlar Web
82423AF Single Leg Shock Absorbing Lanyard 6’ 1-SINGLE 1 Steel Snap Hook 1 Steel Rebar Hook Nomex and Kevlar Web
8242Y3AF Y Leg Shock Absorbing Lanyard 6’ Y-LEG 1 Steel Snap Hook 2 Steel Rebar Hooks Nomex and Kevlar Web
Anchorages
72493FT
Connectors
8242Y3L 8242YAF82423L8242YL8242L
Arc Rated Choker anchors feature a heavy-duty 1-¾” Kevlar webbing with a PVC coated D-ring and a choke loop.
FallTech Arc Flash Rated Lanyards offer Kevlar webbing in both single and double-leg models, with a wide range of connectors to fit your work settings and environments. These connectors are wrapped in a Nomex cover for protection from heat and accidental spatter, with a specially-woven Soft Pack energy absorber, designed to limit arrest forces.
72494FT
Self-Retracting Devices
DURATECH ARC FLASH
SRD’S
HOUSING SWIVEL EYE
CONNECTORSLEG-END CONNECTORS
ITEM#
Stee
l Car
abin
er
Car
abin
er w
ith
Alig
nmen
t Clip
Alum
inum
C
arab
iner
Stee
l Sna
p H
ook
Stee
l Reb
ar H
ook
Alum
inum
Sna
p H
ook
Alum
inum
um R
ebar
H
ook
Ext +
Alu
min
um
Snap
Cho
ke L
oop
Alum
inum
Cap
tive-
Eye
Car
abin
er6’ Mini SINGLE LEG: ¾” Kevlar web lifeline with a Nomex protected energy absorber.
72906SC172906SC372906SC472906SC572906SESL72906SES6
6’ Mini TWIN LEG: ¾” Kevlar web lifeline with a Nomex protected energy absorber. 72906TB172906TB372906TB472906TB5
9’ Max SINGLE LEG: ¾” Kevlar web lifeline with a Nomex protected energy absorber. 82909SC182909SC382909SC682909SC5
9’ Max TWIN LEG: ¾” Kevlar web lifeline with a Nomex protected energy absorber. 82909TB182909TB382909TB682909TB5
11’ SINGLE LEG: ¾” Kevlar web lifeline with a longer working length.82911SC1
82911SC3
82911SG6
82911SG5
DuraTech® Arc Flash SRD’s
DuraTech Arc Flash rated SRD’s come in a variety of configurations to meet the requirements of your work environment. A lightweight, compact design offers a durable housing, a ¾” Kevlar webbing lifeline with the option of a Nomex protected shock absorber, and a wide variety of connection options. The DuraTech Arc Rated SRD’s are extremely effective fall protection after an arc flash or blast up to 40 cal/cm2, making it ideal where high voltage electricity is a critical concern. FallTech’s Arc Rated SRD’s offer greater access to distant anchors, greater mobility and short stopping distances for added reliability.
• 6’ DuraTech Mini – Lightweight with typical arrest distances as low as 26”.• 9’ DuraTech Max – Maximum stopping power, tested up to 5’ below the D-ring.• 11’ DuraTech - Longer working length with maximum stopping power.• User Capacity – 310 lbs. ANSI and 425 lbs. OSHA• Certified to: ANSI – Z359.14, OSHA – CFR1926.502, CFR1910.66, ASTM – F887.
82909TB1
72906TB472906SC3
82909SC1
82911SC382911SC1
6’ DuraTech Mini
9’ DuraTech Max
11’ DuraTech
Discover the full selection of Arc Rated Fall Protection products at www.FallTech.com
FallTech®
Warning: All Fall Protection equipment should only be used after reading and understanding the manufacturer’s instructions and propertraining on the product. Failure to receive proper training and follow the manufacturer’s instructions could result in serious injury or death.#MS23.1 ALX
1306 S. Alameda St. Compton, CA 90221-4803 © 2016www.falltech.com
800.719.4619 323.752.5613
www.falltech.com