Application of glycerol in Application of glycerol in adhesives for wood panelsadhesives for wood panels

KATSAMPAS ILIASKATSAMPAS ILIAS

Foggia, ItalyFoggia, Italy , , April 2009April 2009

CONTENTS

• CHIMAR HELLAS profileCHIMAR HELLAS profile

• INTRODUCTIONINTRODUCTION

• FORMALDEHYDE BASED ADHESIVE RESINSFORMALDEHYDE BASED ADHESIVE RESINS

• FORMALDEHYDE BASED ADHESIVE RESINS AND GLYCEROLFORMALDEHYDE BASED ADHESIVE RESINS AND GLYCEROL

• NATURAL RESINS AND GLYCEROLNATURAL RESINS AND GLYCEROL

• GLYCEROL DERIVATIVES AND WOOD ADHSIVESGLYCEROL DERIVATIVES AND WOOD ADHSIVES

• CHIMAR R&D on “green” panel resins CHIMAR R&D on “green” panel resins

CHIMAR HELLAS profile• Developer and Provider of Industrial Technology for resins

and chemicals for wood-based panels• Technology licensing, manufacturing support, application

support for: formaldehyde resins, resin additives, field processes

• Industrial Engineering and Plant Procurement: formaldehyde, UFC, resins, chemical additives

• Research & Development: develops know-how in house• Training of client personnel• Technical support: remotely and on-site• Product testing: as per international standards

WOOD ADHESIVE TECHNOLOGY :

•The recorded history of bonded wood dates back at least 3,000 years to the Egyptians, and adhesive bonding goes back to early mankind (Skeist, I. and Miron, J. (1990). Introduction to adhesives. In: Skeist, I. (Ed.), Handbook of Adhesives. (3rd)Van Nostrand Reinhold, New York, chap 1.)

•The conventional wood-based composite products are typically made with a thermosetting or heat-curing resin or adhesive that holds the lignocellulosic (wood) fibre together.

•Wood composites are grouped into three general categories: plywood, particle and fibre composite

•Commonly used resin–binder systems include phenol-formaldehyde, urea-formaldehyde, melamine-formaldehyde, and isocyanate.

Examples of various wood composite products. plywood,

OSB, particleboard, MDF, and hardboard.

INTRODUCTION

FORMALDEHYDE BASED ADHESIVE RESINS

FORMALDEHYDE BASED ADHESIVE RESINS REPRESENT BY FAR (>95%) THE BIGGEST VOLUMES WITHIN THE WOOD ADHESIVES

UF RESIN ADHESIVES: 85%MELAMINE BASED RESIN ADHESIVES: 10%PHENOL BASED RESIN ADHESIVES: <5%

Condensation resins based on formaldehyde are formed by the reaction of formaldehyde with various chemicals like urea, melamine, phenol or combination of these substances.

FORMALDEHYDE BASED FORMALDEHYDE BASED ADHESIVE RESINS AND ADHESIVE RESINS AND

GLYCEROLGLYCEROL•Glycerol in aminoplastic resinsGlycerol in aminoplastic resins

Glycerol is used a) as flexibilizer into the stiff chain of aminoplastic resins b) to improve the hydrophobicity c) to decrease the curing time

Improving the performance of MUF resins, with the use of polyols, glycerol, 1,2,6-hexanetriol, sorbitol and others. Act as more effective solvents for melamine and higher molecular weight melamine resin fractions, they disrupt the colloidal state of MUF resins, both of which facilitate the homogeneous phase reactions and ensure better uniform network formation during curing.All of these additives function by addition to the end of the resin after preparation, or by addition to the glue-mix before resin application

Glycerol derivatives can also be used as "latent", acid liberating hardeners for curing melamine resins. 3-Chloro-1,2-propanediol is also known as glycerol-α-monochlorohydrin and Glycerol dichlorohydrin (1,3-dichloro-2-propanol)

•Glycerol in impregnation resinsGlycerol in impregnation resins

Woodbase materials, especially chipboard, which are coated with aminoplastic-impregnated paper webs are used in the manufacture of, for example, furniture components and work surfaces.Compounds containing hydroxyl groups, primarily glycols, or amido- or amino groups serve as plasticizers for impregnated papers. Glycerol is used most widely, however, due to the comparatively high cost of glycerol; it is combined with other cheap substances. One of the most readily available additives for glycerol based plasticizers is synthetic urea.

• Glycerol as formaldehyde catcher Glycerol as formaldehyde catcher The addition of glycerol reduces further the formaldehyde emissions by binding up remaining free volatiles into the polymer matrix and/or reacting with formaldehyde moieties to produce less volatile cyclic and polymeric formals.

NATURAL RESINS AND NATURAL RESINS AND GLYCEROLGLYCEROL

•SSoy flour (SF)oy flour (SF) resins resinsSF resins was found to be brittle, weak and difficult to process into useful binder. Glycerol has been reported to increase the flexibility and extensibility of soy protein plastics by reducing the interaction between protein molecules. The addition of glycerol provides better tensile and flexural properties on the composites binded with the natural resin.

•Glyoxal/glycerol/ boric acidGlyoxal/glycerol/ boric acidInteresting and environmentally friendly mixture suitable for wood dimensional stabilization.

•Natural tackifying resinNatural tackifying resinA potential additive in natural wood adhesives could also be the glycerol ester of gum resin which is made from gum resin or refined gum resin through esterification with glycerol

GLYCEROL DERIVATIVES AND GLYCEROL DERIVATIVES AND WOOD ADHESIVESWOOD ADHESIVES

• HHyperbranched polyether with hydroxyl end groupsyperbranched polyether with hydroxyl end groupsHyperbranched polyether (HBP) obtained from glycerol blended with urea-formaldehyde improves the hardness (16%) and the compressive shear strength (17%) of the cured urea - formaldehyde polymer, whereas water absorption remains unaffected.

Glycerol triacetate (triacetin)Glycerol triacetate (triacetin)Used as a cure accelerator in various binder formulation such phenol – formaldehyde and tannin or lignin binder systems.

Poly-glycerol and poly-glycerol ethers and estersPoly-glycerol and poly-glycerol ethers and estersVery interesting compound due to their high content of hydroxyl groups that can react either with formaldehyde (scavenger) or with urea or melamine to improve overall resin properties.

•Diglycidyl ether (DGE) and polyglycidyl ether (PGE) type compoundsDiglycidyl ether (DGE) and polyglycidyl ether (PGE) type compoundsDue to the reactivity of diglycidyl and polyglycidyl ether compounds with hydroxylated reactants like Lignin and or Tannin, they can potentially be applied in the wood adhesives field.

•PPolyethyleneglycols (PEGs), polyglycerol methacrylate (PGMA)olyethyleneglycols (PEGs), polyglycerol methacrylate (PGMA)Improve the dimensional stability of wood and its hydrophobicity

CHIMAR R&D on “green” panel resins

Resins derived from natural products or by-products: Tannin Lignin Cellulose Spent pulping liquor from paper production Biomass pyrolysis oil (bio-oil) and its fractions Extraction/liquefaction products of agricultural and forestry residues (cashew nut shell liquid (CNSL), liquefied wood, liquefied olive stones, vinasse) Starch Proteins (soy)

Ilias KatsampasChemical Engineer, PhD, Msc

R&D departmentChimar Hellas SA

Sofouli 88, 55131 THESSALONIKI

.: +30-2310424167, +30-2310424149 e-mail: office@ari.gr, ikatsamp@ari.gr

www.chimar-hellas.com