corpuls3Any Emergency under control

corpuls3

The corpuls3 offers an entirely new and revolutionary design

concept compared with traditional compact defibrillator/

monitoring devices. it is designed as a complete modular system

and can be split into:

Monitoring unit

Patient box

Defibrillator/Pacer unit

This means unrivalled ergonomics, functionality and flexibility.

Wireless communicationThe unique wireless network technology allows operation of the

components independently as if they were physically connected.

Your benefits at a glance

Total weight with Defib-module SLIM only 6.3 kg

The constant and immediate feedback of corPatch CPR ensures high quality CPR

Intuitive user interface enables fast diagnosis

Uninterruptible monitoring from the EMS site into the hospital

Large 8.4” colour display with individually configurable display views

Usage under extreme conditions possible (IP55, operating temperature -20° to +55°C)

Ingenious energy management

Tested mounting solutions for every scenario available

Monitoring unitMaximum mobility, Simple user interface, Fast diagnosis

The monitoring unit gives the user control of the corpuls3

system. Here you can configure your alarm limits, view and alter

patient vital signs and document operations.

The detachable monitoring unit guarantees easy hand ling yet

provides a sophisticated solution at all times.

Weighing only 2.7 kg (incl. battery and printer paper) the unit

is easy to operate when arm held. The contoured handle bar

and all around protection ensures that the monitoring unit will

withstand even the harshest conditions.

Your benefits at a glance

Large color display (8,4“) Up to 6 curves and all measured vital parameter values

clearly displayed individually configurable display views 12 lead diagnostic eCG preview

Wide thermal array printer Paper width: 106 mm Real-time printout of up to 6 leads simultaneously Printer settings individually configurable

1-2-3 workflow in defibrillation mode easy and fast operation in defibrillation mode Switch from conventional mode to aeD mode (and vice

versa) at any time

Jog-dial menu navigation through jog-dial intuitive user interface is fast, safe and effective integrated visual alarm

Softkeys Fast and comfortable operation via 7 softkeys Direct access to all main functions

Function keys Direct access to the most important functions through

special defined keys Fast immediate operation, no need for complex menu

navigation

Health insurance card reader Fast and easy download of the individual patient data

Sim-card interface and integrated modem for data

transmission

insurance card-reader

Patient boxUninterruptible monitoring from the EMS site into the hospital

The Patient box is the ”heart” of the system (weighing just 1.0

- 1.3 kg, depending on configuration). it contains all measuring

parameters as well as interfaces and storage. Vital signs are

monitored and stored here plus it can be easily placed directly

with the patient and remain there throughout the entire

operation.

The problem in the past of connecting and disconnecting of

cables and sensors is now history. With the Patient box they

are already preconnected inside the protective bag and can

be used immediately. This ensures that in critical moments like

moving the patient from the emS stretcher to the clinic bed

uninterrupted monitoring is maintained.

Your benefits at a glance12 lead ECG Simultaneous 12 lead diagnostic eCG Optionally, measuring and interpretation software is available

SpO2 (Masimo®) measurement of blood oxygen saturation with

masimo® Rainbow® SeT technology Unrivalled accuracy and measurement even with low

perfusion

PI (Masimo®) Display of the perfusion index as numerical parameter with masimo® Rainbow® SeT technology

SpCO, SpHB, SpMet (Masimo®) innovative masimo® Rainbow® SeT technology

for measurement of SpCO, SpHb and Spmet

NIBP (SunTech®) Reliable automatic non-invasive blood pressure measurement

for adults and neonates

CO2 main stream technology capOne method also applicable to non-intubated patients

2-channel temperature measurement of both core and skin temperature

4-channel IBP Sophisticated intensive care iBP monitoring

with up to 4 channels Simultaneous measurement of arterial, venous and

intracranial pressure

CompactFlash drive® Data storage on CompactFlash card Transfer of recorded mission data via CompactFlash® card

With a backlit monochrome display the Patient box can be used

independently of the monitoring unit (incl. voice recording and

acoustic alarms). all measured data are recorded and data stored

for later transfer.

DefibrillatorImproved ergonomics and flexibility

The modular design of the corpuls3 enables you to totally

disconnect the Defibrillator/Pacer unit when it is not needed –

e.g. while transferring the patient into the hospital – you can

leave the defibrillator in the emergency vehicle. The weight

reduction not only offers you greater mobility and flexibility,

but you also have all the advantages the corpuls3 provides in

ergonomics and functionality on the emS site.

Enhance your therapy options with the smartMetronomeThe smartmetronome supports you with the guidance to

compression frequency and ventilation interval.

Your benefits at a glanceCompartment for corPatch therapy electrodes corPatch therapy electrodes stored in an easily accessible box availability of electrodes visible at one glance easy to check the expiry date

corPatch therapy master cable Usage with either shock paddles or therapy electrodes Shaped cable easy to wrap around socket for storage minimal reset force which guarantees an ergonomic and

functional working

Carrying strap and bag Comfortable carrying strap for easy transport ergonomic backpack carrying strap Strap can be stored in integrated bag

Functional stand Safe standing on every surface impact protection Convenient storage for accessories like electrode gel,

razor etc.

smartMetronome minimises the interval without therapy maximal amount of thorax compressions

during reanimation Configurable and compliant with the eRC guidelines 2010

MountingThe mounting and storage of a defibrillator/patient monitoring

system is essential as part of the solution to meet the range of

demands users experience in emS. GS evaluated the solutions

required for mounting and charging from the very first stages of

the conceptual design of this new generation of devices.

The new corpuls3 modular system is equipped with totally new

and innovative solutions to mount not only the defibrillator but

also all the components of the system with or without power

supply.

Mounting and storageSolutions for every scenario

Mounting for the Monitoring unit

One hand release

12 V DC power supply or 100- 250 V aC

Low weight, slim profile installation depth

also suitable for monitoring unit with Patient box

Mounting for the Patient box

The Patient box mounting means no more vehicle roof

installation and/or extensions are required – cost saving

12 V DC power supply

easy mounting and release

Mounting for the compact unit

One hand release with handle

Self-locking safety mechanism 10 seconds after release

Low weight, slim profile installation depth

12 V DC power supply or 100 - 250 V aC

adaptable to mount corpuls 08/16 systems

Compact unit

The corpuls3 can be used like traditional defibrillator/monitoring units. Using the corpuls3 as a compact unit at the emS site you can experience the benefits and advantages the modular architecture of the system can bring to the scene.

Modular use

The corpuls3 can be separated into a monitoring unit, a Patient box and a Defibrillator/Pacer unit. The Patient box can remain with the patient throughout the entire operation and keeps you updated with all vital signs while you are holding the monitoring unit. if you need the defibrillator or pacer – just use it! You decide, you choose the combination and use of the system to meet your needs.

Semi modular use

The concept of the corpuls3 allows both compact and fully modular use. it is also possible to operate the unit in a semi modular format. Two combinations are possible:

1. Remove the Patient box and place it with the patient. Leave monitoring unit together with the Defibrillator/Pacer unit and operate it similar to a compact device.

2. Detach monitoring unit and Patient box together from the Defibrillator/Pacer unit in order to get closer to the patient.

Compact monitor

The monitoring unit and Patient box together provide a fully functional transport monitor. This combination can work independently of the Defibrillator/Pacer unit and with its low weight, large screen, and wide printer and accessories provides a solution which outperforms many traditional transport monitoring systems.

So there is no need for an extra monitor in the emergency vehicle. Just buy one device and get two solutions.

Modular monitor

Separating the Patient box from the monitoring unit is a unique feature no other device can offer. Functionally and ergonomically this system enables you to improve your results. all vital data is being transmitted in real-time to the monitoring unit. So you never lose control over the patient.

Basis monitor

it is also possible to use the Patient box on its own for basic monitoring. Vital signs can be displayed on a backlit monochrome display. in addition there is an acoustic alarm and a built in microphone.

a CompactFlash® card provides internal memory for the device.

Why Telemedicine?Telemetry in Emergency Care

Quick and professionalmedical studies in the last few years have shown that a quick

and professional treatment of the patient already in the pre-

hospital field significantly increases the survival rate. additionally,

the increasing cost pressure in the health care system demands

innovative and cost-cutting solutions not only from emS

providers, but also from manufacturers of medical technology.

Telemedicine connects established telecommunication

technologies and medical technology in a way that only a few

years ago was not yet possible technically. nowadays, thanks to

telemedicine, the hospital staff can prepare early on before the

patient arrives.

Advantages of telemedicine with corpuls.web Utilisation of the browser-based application on

every end device

Clever management of resources by early therapy

recommendation and treatment

Live data transmission of curves and parameters

Display, measurement and forwarding of the

12 lead diagnostic eCG in various formats (e.g. PDF, SCP)

approved medical Product

Referral without delay:Managing short resources The advisory support on-site and the intra-hospital preparation

optimises patient care.

The early transmission of patient data from the scene gives

the specialist in the hospital enough time and information to

optimally prepare for the arriving patient. The permanent storage

of the transmitted data supports the exacting requirements of

quality management in emergency care.

30% time savedBy using telemedicine in the pre-hospital care, the door-to-balloon

time is reduced significantly.*

*Rao a et al. (2010 Feb): impact of the prehospital eCG on door-to-balloon time in ST elevation myocardial infarction. Providence Hospital and Southfield, USa

The solution: corpuls.webMedical Data from the scene to the hospital

Transfer medical dataThe browser-based application corpuls.web enables paramedics

to transfer medical data recorded with corpuls3 from the scene

in real-time to specialists in the hospital.

So the specialists gain the important and necessary information

to be all set until the arrival of the patient.

The on-site consulting by a specialist and the intra-hospital

preparation helps to save restricted resources and encourages

the life-saving patient care. Therapy recommendations can be

given without any delay and the optimal treatment of the patient

will start immediately.

Your benefits at a glance Usage of the browser-based appli-cation on every end device

important decrease of the „door-to-balloon“-time

economy of resources by in time recommendation and

treatment

Live data transmission of curves and parameters

Display and handling of patient data and insurance

information

Presentation, analysis and transmission of the D-eCG in

various formats (e.g. PDF, SCP)

Security Safeguards encryption of patient data sent to server

(128 bit aeS encryption)

Separate transmission of patient data (static) and

medical data (dynamic) to server

authenticated SSL certificate for the transmission

from server to client

automated database back-up

Highest security standards by the server hoster (iSO 27001)

Guaranteed server stability 99.5% (upgradeable)

Requirements for the ClientSupported Web-Browsers

mozilla Firefox

microsoft internet explorer

Google Chrome

apple Safari

Minimum Hardware Requirements

1 GHz processor

1 GB Ram (32-Bit)

Screen resolution min. 1280 x 800 Pixel

(recommended: 1600 x 900 Pixel)

*Bradley eH et al. (2006 nov): Strategies for reducing the door-to-balloon time in acute myocardial infarction. Yale University School of medicine, new Haven, USa

Application options Time gain Solutions with corpuls.web

already on-site, the ambulance crew cansupply the PCi lab with relevant data. Up to 24 min. Reception and visualisation of the 12 lead

diagnostic eCG.

There is a data exchange in realtime between the ambulance crew and the hospital. Up to 13 min. Continuous transmission of live data and of the 12

lead diagnostic eCG already during transport.

Strategies to reduce the door-to-balloon time in myocardial ischaemias*

At the Emergency Site:

The prehospital personnel arrives on the scene and performs a

first examination of the patient. To make better decisions, the

medical data collected on-site with corpuls3 are streamed to clinical

specialists.

Transmission of D-eCGs, events and patient data

Transmission of all curves and vital parameters

The Receiving Specialist:

The specialist is able to get a first overview of the emergency

situation with any end device connected to the internet in hospital

or at any other location.

assessment and diagnosis of patient data by using the

corpuls.web interface

Transfer of collected data to specialists and

eCG-archiving systems

The Advantages:

important information is transmitted to the hospital even before

the arrival of the patient.

already at this point of time necessary precautions can be taken.

economic management of resources

improvement of patient care

corpuls.webImproves patient care

*Will be available in the future**For further information: www.datamed.com

The communication conceptcorpuls.web

Dynamic Data

Curves

Vital parameters

Static Data

12 lead diagnostic eCG

Patient data

events / alarms

master data

PDF SCP DatamedeCG-converter**

DiCOm*HL7/aeCG*

Notification via

e-mail

SmS*

Pager*

automated calls*

Manual forwarding of 12 lead diagnostic ECGAutomatic forwarding of 12 lead diagnostic ECG

(configurable with forwarding rules)

Forwarding destinations

e-mail address

(S)FTP server directories per upload

network drive directories

Fax end device (optional)

Browserbased application

12 lead diagnostic ECG andLivestreamingRealtime medical data from the emergency site

Mission list Configurable mission list for displaying new and already

reviewed missions

Mission Displaying and editing of patient and master data

of the corpuls3

12 lead diagnostic ECG Display of the 12 lead preview of the diagnostic eCG

Selection of the lead to be measured

manual 2-point measurement of a lead

Display of the measurement table generated by the software module HeS®

export as PDF or SCP

Live data Realtime display of curves and parameters transmitted

from the corpuls3

Events Display of all technical and physiological events and

alarms recorded by the corpuls3

Report / Documentation of: medical history

Diagnosis

Therapy recommendation

12 lead ECG diagnosis Livestreaming

measurement of a selected lead of the 12 lead diagnostic eCG via amplitude and duration

Documentation of medical history, diagnosis and therapy recommendations

Preview of all 12 leads of the diagnostic eCG including the vital parameters

Display of all technical and physiological events and alarms recorded by the corpuls3

editing the patient and master data in the mission Display of curves and vital parameters transmitted in real-time from the corpuls3

One for all – all for oneWhen being used as a compact device each component can

revert to the battery capacity of the other components. The

exchange and use of energy of the other devices is made by

special contacts between the components. This means that you

can use the energy of three batteries at any time.

Three components –three batteries – three timesenergy management!each device has identical batteries. They can be easily replaced by hand without tools as needed.

Flexibility counts –the corpuls3 takes over!Do you have enough energy left to safely complete your

operation? The corpuls3 gives an exact forecast of the capacity

left in each battery minute by minute. it evaluates the actual

energy usage to determine an exact forecast of the running time

remaining for the system.

Energy managementFlexibility counts

Contacts between monitoring unit and Patient box

exchange of the battery can be done by hand

Screenshot of remaining running time while fully connected

The modules can be charged either by 12 V DC directly or with a mains adapter from 100 V to 250 V aC.

User-friendly chargingthrough magnetic contactCharging the device or one of the components is easy and fast.

each component has a magnetic contact, which can be attached

to a special magnetic plug for charging. attached to each other

the batteries can be charged or alternatively the unit can be

operated on mains only – even without any batteries inserted

into the device.

Patient Module Defibrillator Module SLIM

corPatch CPR, feedback sensor Biphasic rectangular pulse, impedance-compensated

12-lead eCG, HF, aF, niBD, CO2, 4xiBD, 2xTemP, SpO2, SpCO, Spmet, SpHb, Pi, PP

aeD protocol in accordance with eRC guidelines 2010 / aHa

Compact-Flash storage, usage data log, microphone for voice recording, sound generator, backlit monochrome LCD (20 mm x 40 mm)

5 to 200 J, energy protocol can be configured, 1-2-3 operation

Backlit monochrome LCD display 20 x 40 mm smartmetronome for improved therapy options

Transport bag for sensors and cables Transcutaneous pacer with FiX, DemanD and OVeRDRiVe mode for Ramp-Down Pacing (max. 300/min); Stimulation via corPatch elec-trodes; intensity 0 – 150 ma, Frequency 30 – 150/min

Dimensions (H x W x D): 13.5 cm x 26.5 cm x 5.5 cm Dimensions (H x W x D): 22 cm x 28 cm x 12 cm

Weight: 1.3 kg Weight: 2.3 kg

General Monitor Module

Operating temperature: -20 °C to + 55 °C SpO2, niBP, iBP, Temp: 0 °C to + 55 °C CO2 0 °C to + 45 °C SpCO, Spmet, SpHb: 0 °C to + 70 °C

8.4“ color display, transflective, backlit, up to six curve signals simultaneously; 12-channel preview for diagnostic eCG

Dust- and splashwater Proof (iP55) Peripherally push protected

impact protection, Din en 1789, e1-designation Jog-Dial with visiable alarm light

Li-ion battery, operating Time 7 - 10 hours intuitive operating interface with additional night vision mode

Power supply 12 V DC, 100 – 250 V aC with mains power supply, complete or individual

Printer: Paper is 106 mm wide and 22 m long; up to six curves over direct printing; writing speeds: 6.25, 12.5, 25, 50 mm/s; low-maintenance version

Dimensions, complete device (H x W x D): 29,6 cm x 30.5 cm x 19.5 cm

USB connection, GSm modem (optional), Bluetooth interface

Certified for the use under hyperbaric conditions up to 3 barg Dimensions (H x W x D): 29.5 cm x 30.5 cm x 12 cm

Weight of complete device: 6,3 kg (depending on options included) Weight: 2.7 kg

Technical Data corpuls3 SLIM

SpecificationsGeneral and modules

0123