Circular ConnectorsM16 acc. to IEC 61076-2-106

6777

3 · 1

410-

1.0

· EN

www.lumberg.com · info@lumberg.com

06-17007

7107-1

8008

8108-1

3003

4004

5005

50/605-1

6006

12012

12012

14014

14014

Plug Socket Plug Socket

Plug Socket Plug Socket

06-1 06-1 08-1 08-1

0 No protection against accidental contact,no protection against solid foreign bodies

1Protection against contact with any largearea by hand and against solid foreignbodies with Ø > 50 mm

2Protection against contact with the fingers,protection against solid foreign bodies withØ > 12 mm

3Protection against tools, wires or similar ob -jects with Ø > 2.5 mm, protection againstsolid foreign bodies with Ø > 2.5 mm

4 As 3, however Ø > 1 mm

5 Full protection against contact, protectionagainst interior injurious dust deposits

6 Total protection against contact, protectionagainst penetration of dust

Diagram in accordance with DIN VDE 470-1, DIN EN 60529, IEC 60529Source: ZVEI - Zentralverband Elektrotechnik- und Elektroindustrie e.V.

0 No protection against water

1

2 Protection against diagonal water drips (upto a 15° angle)

3 Protection against diagonal water drips (upto a 60° angle)

4 Protection against water (out of a nozzle)from all directions

5 Full protection against contact, protectionagainst interior injurious dust deposits

6 Protection against ingress of water in caseof temporary flooding

7 Protection against ingress of water in caseof temporary immersion

8Protection against ingress of water in caseof continuous immersion, requirementsunder agreement of user and manufacturer

INDEX DEGREE OF PROTECTION INDEX DEGREE OF PROTECTION

INTERNATIONAL PROTECTION CLASSES ACCORDING TODIN EN 60529 (IEC 529/VDE 047 T1)

CODE LETTERS FIRST INDEX FIGURE SECOND INDEX FIGURE(International (foreign bodies protection) (water protecion)Protection)

IP 6 8

PROTECTION CLASSESPrinted Circuit Board Layout for Chassis Connectors*

Printed Circuit Board Layout for Chassis Connectors with Ground Contact*

* Components side view SWUM™ – Sealed when unmated*

Protection against vertical water drips

with solder terminals033200* plug 360° 032200* socket 360°

empty housing for crimp contacts036500* plug 360°036000* socket 360°

mating033..., 036500 with sockets030..., 032..., 036...032..., 036000 with plugs 031...,033..., 036...

Plugs and sockets with threadedjoint, with vibration protection,optimized assembly, shielded, upto cable-Ø 10 mm

Wide range of types, with or with-

out shielding. Compatible system

according to IEC 60130-9 resp. IEC

61076-2-106, SWUM™ parts even

sealed when unmated, many types

acc. to AISG specification. For signal

and load currents up to 5 A.

plugs, straightSV up to cable-Ø 3 mmSV...-8 up to cable-Ø 6 mm

sockets, straightKV up to cable-Ø 3 mmKV...-8 up to cable-Ø 6 mm

matingplugs with K..., WKVsockets with S..., WSV

Plugs and sockets with threadedjoint and with solder terminals

with solder terminals0331 plug0321 socket

mating033..., 0365 with sockets 030...,032..., 036...032..., 0360 with plugs 031...,033..., 036...

Plugs and sockets with threadedjoint, unshielded, up to cable-Ø8 mm

with solder terminalsSFV for front mountingSGV for rear mounting

for circuit boardsSGR for rear mounting

mating with sockets KF..., KG..., KV..., WKV

Chassis plugs with threaded joint

SV... · KV...IP40

SF... · SG...

with solder terminalsKFV for front mountingKGV for rear mounting

for circuit boardsKFR for front mountingKGR for rear mounting

mating with plugs SF..., SG..., SV..., WSV

Chassis sockets with threaded joint

03150315-1 AISG*0315-2 SWUM™, AISG*

matings with sockets 032..., 0360

Chassis plugs with threaded jointand with solder terminals, for rearmounting

03170317-1 AISG*0317-2 SWUM™, AISG*031798-1 with additionalground contact, AISG*031798-2 with additionalground contact, SWUM™, AISG*

matings with sockets032..., 0360

Chassis plugs with threaded joint,for printed circuit boards, for rearmounting

03050305-1 AISG*0305-2 SWUM™, AISG*

matings with plugs 033..., 0365

Chassis sockets with threaded jointand with solder terminals, for rearmounting

KF... · KG... 032... · 033... 0315... 0305...IP40 IP40 IP68

0317...IP68 IP68

Zn diecast, nickel-plated

IP68

0363 AISG*

matings with plugs033..., 0365

Chassis sockets with threaded joint,for crimp contacts, for rearmounting

0363IP68

0362 AISG*

matings with plugs033..., 0365

Chassis sockets with threaded joint,for crimp contacts, for frontmount ing

0362IP68

03040304-1 AISG*0304-2 SWUM™, AISG*

matings with plugs033..., 0365

Chassis sockets with threaded jointand with solder terminals, for frontmounting

0304...IP68

03160316-1 AISG*0316-2 SWUM™, AISG*

matings with sockets 032..., 0360

Chassis plugs with threaded joint,for printed circuit boards, for frontmounting

0316...IP68

03140314-1 AISG*0314-2 SWUM™, AISG*

matings with sockets 032..., 0360

Chassis plugs with threaded jointand with solder terminals, for frontmounting

0314...IP68

plugs, angularWSV up to cable-Ø 3 mm

sockets, angularWKV up to cable-Ø 3 mm

matingplugs with 0330..., K..., WKVsockets with 0320..., S..., WSV

Plugs and sockets with threadedjoint and with solder terminals

WSV · WKVIP40

with solder terminals0332(-1*) plug 360°0322(-1*) socket 360°

empty housing for crimp contacts0365* plug 360°0360* socket 360°

mating033..., 0365 with sockets 030...,032..., 036...032..., 0360 with plugs 031...,033..., 036...

Plugs and sockets with threadedjoint, shielded, up to cable-Ø 8 mm

032... · 033... · 036...IP68

Zn diecast, nickel-plated

032... · 033... · 036...

CuZn, nickel-plated

3–14 (all pin configuration except for 06-1) (03...-1 and 03...00 only 08-1, 036..., 03...-2 only 06-1 and 08-1)

Housing

Number of poles

CuZn, nickel-plated PC

3–12 (all pin configuration except for 06-1 and 14)

03060306-1 AISG*0306-2 SWUM™, AISG*

matings with plugs 033..., 0365

Chassis sockets with threaded joint,for printed circuit boards, for frontmounting

03180318-1 AISG*0318-2 SWUM™, AISG*

matings with sockets032..., 0360

Flange chassis plugs with thread-ed joint, with solder terminals,for front mounting

0306... 0318...IP68

03080308-1 AISG*0308-2 SWUM™, AISG*

fof crimp contacts036297 AISG*

matings with plugs033..., 0365

Flange chassis sockets with thread -ed joint, with solder terminals, forfront mounting

0308...IP68

0369 V109 pin, for plug housings

0364 V109 bush, for socket hous-ings

Crimp contacts, gold-plated, con-nectable wire sections 0.25–0.75mm² (AWG 23–18)

0369 V109 · 0364 V109

nuts0384 hexagonal nut0385 slit nut

flat gaskets 0308 C 02 flat gasket for flangereceptacles0322 C 16 spare part flat gasket

Gaskets and nuts

038... · 0322 C 16 · 0308 C02IP68

03070307-1 AISG*0307-2 SWUM™, AISG*030798-1 with additionalground contact, AISG*030798-2 with additionalground contact, SWUM™, AISG*

matings with plugs033..., 0365

Chassis sockets with threaded joint,for printed circuit boards, for rearmounting

0307...IP68

CuZn, pre-nickel and tin-plated

0137 plug

0103 chassis socket

Circular DIN connector, shielded,with locking latch (with bendprotection and solder connection)and circular DIN chassis socket(with solder connection)

0137 · 0103

0132 plug, straight0134 plug angular0122 socket

0107 chassis socket

Circular DIN connectors, shielded,with bayonet locking (with bendprotection and solder con nect ion)and circular DIN chassis socket(with solder connection)

0132 · 0134 · 0122 · 0107

MP-371 plugMJ-372 socket

TM 0508 A chassis socket

Miniatur circular connectors (withbend protection and solder con-nection) and miniature chassissocket (for printed circuit boards)

0131 plug0121 socket

Circular DIN connector, shielded,with locking latch (with bendprotection and solder connection)

MP-371 · MJ-372 · TM 0508 A

Circular DIN connectors without

threaded joint, compatible ac cord -

ing to IEC 60130-9 resp. IEC 61076-

2-106. For signal and low load cur -

rents up to 4 A.

Series 01

Miniature and DINcircular connectors

4, 6, 8 (TM 0508 A 4–8)

silver-plated (TM0508A fl. gold)

1 A AC

100 V AC

3–8 (0107 3, 4, 5, 7, 8)

0131 · 0121

Series 03

Circular connectorswith threaded jointM16

for IP40/IP68

Insulating body: PA GF, V0 according to UL94(...-2, PA, V2 according to UL94)Contact: 3–8 poles CuZn, silver-platedand flash gold-plated, 12–14 poles CuZn, pre-nickeland gold-platedConnectable wire section:3–8 poles 0.75 mm2, 12–14 poles 0.25 mm2

Rated current: 3–8 poles 5 A, 12–14 poles 3 ARated voltage*1: 3–7 poles 300 V AC (pin config-uration 03, 04, 05-1, 06, 07 resp.30, 40, 50/6, 60, 70)5–8 poles 100 V AC (pin config u -ra tion 05, 06-1, 07-1, 08, 08-1, resp.50, 71, 80, 81) (036... 300 V AC)12–14 poles 160 V AC (pin con-figuration 12, 14 resp. 120, 140)

* SWUM™: Sealed when unmated, watertight in unmated condition. AISG: Product according to AISG specification.

*1 at pollution degree 1, according to IEC 60664

0380 wrench for plugs and sockets032..., 033...

ZMS 20 wrench for chassis plugsand chassis sockets 030..., 031...,KFR, KFV, KGR, KGV, SFV, SGR,SGV

Wrench for plugs and sockets

0380 · ZMS 20

WB chassis socket010599 chassis socket, angular

Chassis socket, suitable for locking(for printed ciruit boards)

WB · 010599

silver-plated

60 V AC

4 A

Contact plating

Rated current

Rated voltage

Number of poles 5, 6, 8 (010599 6)

tin-plated

24 V AC/34 V DC

protective caps, metal0383 with chain, for plugs038399 without chain, for plugs0381 with chain, for sockets038199 without chain, for sockets

protective caps, plastic038899 without chain, for plugs038799 without chain, for sockets

shielding ring0382

Protecting caps and shielding ring

038...IP68

CuZn, nickel-plated/PC (0382,CuZn, pre-nickel and tin-plated)

0305-1 U socket, AISG*0315-1 U plug, AISG*

Chassis plugs and sockets withthreaded joint,cables and pottedsolder area, for rear mounting

0305-1 U · 0315-1 UIP68

3–14 (all pin configuration except for 06-1) (03...-1 only 08-1, 036..., 03...-2 only 06-1 and 08-1)Number of poles

Zn diecast, nickel-plated (...U pre-copper and nickel-plated)HousingCuSn, gold-plated

IP68NEW