Analog Layout with tsmc035

• It is better you understand ~wllin/cell_design/celltut.pdf to have the basic layout skill up to chapter 4.

• Tsmc035 files for layout are ~wllin/tsmc035/Virtuoso/{display.drf,035ms.tf}

• Place the two file where you run icfb.• You need to run Calibre DRC and LVS to make sure layo

ut correct. Rule files are in ~wllin/tsmc035/Calibre_DRC/CM35P5_4M.23b.pre ~wllin/tsmc035/Calibre_LVS/cali035pMM5V_2P4M.lvs updated on 5/18/2006 to solve pin/port not found error.

• You need to stream out layout before run “calibre –gui” To stream out: icfb window file export stream

Virtuoso tech file & Calibre

• In icfb window, tools technology file manager new 035ms.tf and tech lib name

• Source /usr/mentor/cic_setup/calibre.csh

• calibre –gui

Technology file manager

New technology library

Layout

Layout

Layout

常用 bindkey

• f --- fit edit

• ^z --- zoom in

• Z --- zoom out

• c --- copy

• m --- move

• s --- stretch

• k --- create ruler

• K --- clear all ruler

• F2 --- save

• F3 --- rotate, mirror ( 需配合 copy, move 使用 )

• 拖曳滑鼠右鍵 --- zoom area

• 單點滑鼠右鍵 --- 1. 重複前一次指令 2.rotate ( 需配合 copy, move 使用 )

Layout

Layout

Layout - contact

Layout - label

Calibre - DRC

DRC

Calibre - LVS

LVS

PEX

• Analog block RC extraction

source /usr/mentor/cic_setup/calibre.csh

load("/usr/mentor/Calibre_ss/cur/shared/pkgs/icv/tools/queryskl/calibre.skl") in icfb window

From a layout window,Calibre run pex rule can be find in

~wllin/tsmc035/RC_Ex

PEX

PEX