Upload
nguyenkhanh
View
216
Download
2
Embed Size (px)
Citation preview
Stainless Steel Grille Guards
• All black powder coated and mirror-finish grille guards are made from 1-5/8” 304 Stainless Steel. Guaranteed not to rust, pit or corrode.
• Aggressive styling and front-end vehicle protection.
• No need to replace whole bumper like most full guards on the market.
• Built-in light tabs for accessory lights. (Accessory lights sold separately.)
• Easy installation. No drilling required.
• Made in the USA.
• Fits all Wrangler JKs 2007 to current. (Call for fitment on special edition JKs.)
Installation is easy, secure, and completed in minutes with NO DRILLING required. Watch the video at www.RealWheels.com/wrangler or by scanning the QR code.
Easy Installation
All 304Stainless Steel
2 For additional Jeep Wrangler accessories, please visit us at www.RealWheels.com/wrangler
All RealWheels Grille Guards Feature:
Mirror-Finish “Enforcer” Grille Guard
Black “Enforcer” Grille Guard
Black “Over-The-Hood” Grill Guard
“Enforcer” Grille Guard
“Over-The-Hood” Grille Guard
For Jeep fans looking for more than just a typical Jeep Accessory.This Grille Guard provides the ultimate in aggressive styling and front-end vehicle protection. Available in a durable black powder coating or polished mirror finish.
RW300-3-J
RW300-3BP-J
RW304-1BP-J
Shown with TagLites. Sold separately. See page 5.
Accessories fit all standard JKs 2007 to current 1-800-982-1180 • www.RealWheels.com
Stainless Steel
Stainless Steel
3
Installation of Over-The-Hood Bar and access under the hood is achieved quickly without tools, using quick-release bolts.
1 2 3
Give your Wrangler that “Take No Prisoners” attitude with the boldest guard available from RealWheels Accessories. The Over-The-Hood attractive styling also makes a bold statement from the vehicle’s side profile, as this extreme guard extends 8” back over the vehicle’s hood. Durable black powder coating.
Access under the hood is achieved quickly without tools, using quick-release bolts. Installation of this powerful new guard is extremely easy, using factory mounting locations, with NO DRILLING required. Built-in light tabs provide a perfect location for your favorite accessory lights.
2.5” Pre-Runner Bar
1-5/8” Pre-Runner Bar
• This new bar is 54% larger than our standard Pre-Runner Bar and is an ideal way to enhance the JK’s tough front-end design.
• 2.5” Stainless Steel will not rust, pit or corrode.• Available in a durable black powder coating or
polished mirror finish.• Built-in light tabs for accessory lights. (Accessory lights
sold separately.)• Installation is easy and secure. NO DRILLING required.• Made in the U.S.A. • Fits all Wrangler JKs 2007 to current.
(Call for fitment on special edition JKs.)
The Pre-Runner Bar adds style to your JK, while enhancing its tough front-end design features. Installation is easy and secure, with NO DRILLING required. Accessory light mounting locations have been provided for a true Baja inspired appearance. (Accessory lights sold separately.)Made in the U.S.A.
Taglites Kit
Mirror-Finish Stainless Steel:
RW310-1-J
Mirror-Finish Stainless Steel:
RW310-25-J
Black Powder-Coated Stainless Steel:
RW310-1BP-J
Black Powder-Coated Stainless Steel:
RW310-25BP-J
NEW!
For additional Jeep Wrangler accessories, please visit us at www.RealWheels.com/wrangler
Stainless Steel
Stainless Steel
All 304Stainless Steel
All black powder coated and mirror-finish pre-runner bars are
made from 304 Stainless Steel
4
Light Bar w/Light TabsIf you plan to turn night into day with multiple roof-mounted lights, this light bar is the perfect accessory. The stainless steel bar installs securely and easily in minutes and compliments the vehicle’s design. Includes welded mounting tabs for up to 4 lights. (Accessory lights sold separately.) Made in the U.S.A.
Mirror-Finish Stainless Steel Light Bar
TagLites Kit
Universal Mount Only
Black Light Bar
RW604-1-J
Black: RW604-3LBP-U
Stainless: RW604-3L-U
(Mount, Lights, Wiring)
Black: RW604-3BP-U
Stainless: RW604-3-U
RW604-1BP-J
1-800-982-1180 • www.RealWheels.com
This sturdy universal mount requires no drilling. Simply attach into existing license plate threaded holes. TagLites™ can go on almost any vehicle (big truck, pickup truck, SUV, crossover or car) as long as the vehicle has a front license plate mounting area.
• Fits metal or plastic bumpers
• Works with a variety of lights
• Patent Pending
The Easiest Way To Add Lights To Your Vehicle. Fits Under ANY Front License Plate!
Windshield Light MountsNot just a bracket but a statement. Unique design enhances the distinguishing features of your Jeep Wrangler. Perfect compliment to our Light Bar. Includes rubber mounting pads to protect your paint. (Accessory lights sold separately.) Made in the U.S.A.
Mirror-Finish Stainless Steel: RW604-2-J
1 2 3
Black Powder-Coated: RW604-2BP-J
5
Stainless bar and stainless side supports
Stainless bar and steel side supports
Imported product.
Accessories fit all Wrangler JKs 2007 to current
Billet Fuel Doors
Black Locking Fuel DoorMirror-Finish Locking Fuel Door
Non-Locking Fuel Door
RW202-2BPL-JRW202-2L-J
Mirror-Finish: RW202-2-J
Black: RW202-2BP-J
Billet AccessoriesBillet aluminum accessories are precision-machined from solid blocks of aircraft quality aluminum, and then polished to a mirror-finish or electrostatically powder coated for a great look and lasting durability. All easily and securely install in seconds with heavy-duty 3M tape. All made in the U.S.A.
Billet Front Marker Light Surrounds
Billet Side Marker Light Surrounds
Billet Trail Rated Logo Surrounds
Billet Antenna Surround
Mirror-Finish: RW208-1-J
Black: RW208-1BP-J
Mirror-Finish: RW207-1-J
Black: RW207-1BP-J
Mirror-Finish: RW220-1-J
Black: RW220-1BP-J
Mirror-Finish: RW219-1-J
Black: RW219-1BP-J
Billet Driving Light Surrounds Billet Driving Light SurroundsBlack: RW227-1BP-J Mirror-Finish: RW227-1-J
Innovative design features ensure quick, easy installation of this attractive billet design. Locking and non-locking models available.
All made in the U.S.A.
6 For additional Jeep Wrangler accessories, please visit us at www.RealWheels.com/wrangler
Billet Fuel Doors
1-800-982-1180 • www.RealWheels.com
Black Black Mirror-FinishMirror-FinishDriver Side: RW236-1BP-J
Passenger: RW236-2BP-J
Driver Side: RW236-1-J
Passenger: RW236-2-J
Driver Side: RW236-3-JPassenger: RW236-4-J
Billet Side Foot Rests
• Aircraft quality billet aluminum
• Available in a durable black powder coating or mirror-finish.
• Installation is easy and secure with stainless steel mounting post.
• Fits all Wrangler JKs 2007 to current
• All made in the U.S.A.
When the doors come off, these side foot rests easily attach to the door hinge mounts for the ultimate open-air experience.
New larger design precision machined with deep diamond-cut pattern for the ultimate non-slip surface.
NEW!
Billet Seat HandlesWhen you open the door of your new JK, these stylish billet levers will make it look like you ordered custom seats. Made in the U.S.A.
Large Adjustable Seat Handle
Original Side Foot Rest
Side Foot Rest XL
Small Adjustable Seat Handle
Mirror-Finish: RW221-2-J
Black: RW221-2BP-J
Mirror-Finish: RW221-1-J
Black: RW221-1BP-J
Driver Side: RW236-3BP-JPassenger: RW236-4BP-J
New Larger Design: 6” x 33⁄8”
All RealWheels Foot Rests Feature:
Easy Installation. Scan QR Code to watch video.
7Accessories fit all Wrangler JKs 2007 to current
© 2013 RealWheels Corporation. All Rights Reserved.
3940 Tannahill Drive • Gurnee, IL 60031 847-662-7722 • Fax: 847-662-7744 • www.RealWheels.com
Call 1-800-982-1180 for more information.
Jeep is a registered trademark of Chrysler Group LLC and is used for identification purposes only. RealWheels Corporation and its products are not affiliated with Chrysler Group LLC, Jeep or any of Chrysler’s affiliated companies. Product design and specifications are subject to alteration or change in accordance with our policy of continual improvement.
Tail Light Armor
• Heavy-gauge stainless plate or steel plate for the ultimate protection.
• Installation is easy and secure.• Made in the U.S.A.
• Available in a durable black powder coating or polished mirror-finished stainless steel.
• Fits all Wrangler JKs 2007 to current.
Mirror-Finish Stainless: RW306-1-J Black Powder-Coated: RW306-1BP-JMirror-Finish: RW143-4-J
Rear Door Hinge CoversMake a statement in style with these attractive hinge accessories. Brighter than chrome, each is precision laser-cut from high quality, mirror-finished stainless steel. Installs in minutes with heavy-duty 3M tape. Made in the U.S.A.
Stainless Steel
Functional protection and rugged appearance.