Upload
duongthu
View
216
Download
1
Embed Size (px)
Citation preview
Aluminum profiles A-W-67T // All the
openings' frames are made with separate
internal and external extrusion aluminum
profiles. The inner and outer aluminum
frames are separated internally (and
invisibly) by high-strength polyamide profiles.
The spacers keep the inside and outside
frames insulated from one another and
blocks the thermal bridges.
SolarBan 70xl // Solar control, low-e glass that combines the clear appearance of
transparent, color-neutral glass with high solar control and visible light transmittance.
Seasons Window // The system uses an innovative reversible frame, incorporating two
glazing assemblies: clear glazing to provide a weatherproof seal, and tinted glazing to
provide solar control. The two glazing assemblies and a ventilated channel between them
rotate together through 180o to enable a transformation from the winter mode, where the
tinted glass is on the interior, to the summer mode, where it is on the exterior.
Solar Or BIPV (Building Integrated
Photovoltaic) Module // Designed for
climate control and vertical solar energy
harvesting, combining energy production
with heat insulation, sun protection and
robust structure together with aesthetic
ambient effect. The core of the module
is a three dimensional shape prism.
Installed as the east and west windows.
Pythagoras Solar // Photovoltaic glass
units (PVGUs), or more simply solar
windows, are designed to replace
conventional insulated glass units in
curtain wall, window and skylight
systems. The product simultaneously
provides energy efficiency, solar energy
generation, and optimized day lighting.
Module Manufacturer Short Description of Array DC Rating of Array
(sum of the DC ratings)
SolarOr LTD.
West Wall - 40 Prismatic Elements of 2.8W each, Solar Angle = 900
DC = 46V
Pdc = 0.113 kW
SolarOr LTD. East Wall - 33 Prismatic Elements of 2.8W each, Solar Angle = 900
DC = 17.3V
Pdc = 0.093 kW
SOLAR POWER ET PV solar collectors
ET-P672280 300W - south roof //
27 collectors (54 Sqm) PV Solar panels
high module conversion efficiency, 0 to
+5W positive tolerance for mainstream
products. Certified to withstand high
wind loads and snow loads. Anodized
aluminum is mainly for improving
corrosion resistance. Anti-reflective
highly transparent, low iron tempered
glass. Excellent performance in a low
light environment.
Module Manufacturer Short Description of Array DC Rating of Array
(sum of the DC ratings)
ET-Solar
Roof PV – 27 PV panels of 300W each, Solar Angle = 150
8.1 kW
ET- Solar South Wall
14 PV panels of 300W each , Solar Angle = 900
4.2 kW
Module Manufacturer Short Description of Array DC Rating of Array
(sum of the DC ratings)
Pythagoras Solar South façade – 2 PVGU windows of 107W each, 2 PVGU windows of 88W each
Solar Angle = 900
0.39 kW
Main photovoltaic cells placed on the southern roof in azimuth of 15o
(Despite the maximum efficiency of 28 o)
Total DC Power = 98.21 kW
Solar Edge Single Phase Inverters and Optimizers // Three-fold architecture consists of:
Power optimizers which perform module-level MPPT. A highly-optimized
algorithm ensures that each module is constantly kept at maximum power point
(MPP), preventing energy losses due to module mismatch or partial shading
conditions.
Fixed String Voltage - A highly reliable solar PV inverter. A unique Solar Edge
innovation, the string’s voltage is maintained at a fixed optimal point for DC to AC
inversion, regardless of a strings length or environmental conditions.
Advanced Power-Line-Communication - A portal for module-level monitoring and
yield assurance. All power optimizers continuously measure and communicate a
range of module-specific status indicators.
The power optimizer is connected by installers to each PV module or embedded by module
manufacturers, replacing the traditional solar junction box.
Quantity Rating
(kVA or KW)
Voltage
(AC Output Voltage Range)
Model Number Inverter Manufacturer
3 5 kW 184 - 264.5 SE5000
SolarEdge Technologies
Inc.
Total AC power of all inverters is 91 kW
Total DC Power = 98.21 kW
TIGI Solar Thermal Heating System // Honeycomb Collector which is a new type of solar thermal collector targeting high temperature differential applications. TI At the heart of the Honeycomb Collector is a polymer-made layer of transparent insulation, allowing for energy to enter the collector and heat the absorber plate.
1. Sunlight passes through the Transparent Insulation, heating the energy collecting surface.
2. The Transparent Insulation layer suppresses convection heat losses
3. The Transparent Insulation layer provides high resistance to thermal back-radiation
4. The result is a system with very high energy-efficiency, allowing energy to enter freely but limiting energy losses to a minimum
Honeycomb Collectors are extremely efficient in high temperature differences – heating water to high temperature differential from ambient. Hot water generated by TIGI’s products can therefore also be used to serve space heating or industrial process heat as well as to cool spaces in the summertime such as with the Linum System for cooling and heating which is used in the project.
1
2
3
4
Traditional air conditioning cycle // the most energetically wasteful element is the
compressor and actually this is the way we evaluate the COP (coefficient of performance)
which is a measure that can point us to the energy efficiency of the air conditioner. We know
that the higher the value of the COP, the better the output of the air conditioning system.
Solar Cooling // The house will use a solar hybrid air conditioning system by Linum Systems
which incorporates a thermodynamic cycle that produces cooling or heating. The cycle can
be powered by either solar thermal energy (in the form of heat) or electricity, or by both. The
air conditioner can be driven from high performance TIGI Solar Thermal Honeycomb
collectors producing hot water at temperatures of 100 ‐ 120°C. The steam is responsible to
change the refrigerant from liquid to super-heated gas in order to drive a turbine which is
responsible for operating the compressor. In this way we can minimize the use of electric
compressor and save large amounts of energy. In the house, the indoor unit is very similar to
any standard air conditioning indoor unit.
TIGI System Diagram- Hot water supply for the "Linum" Solar Cooling
The use of these Thermal Solar flat panels turns installation of the solar collectors into a cost‐
effective and straightforward process, which can be carried out routinely throughout the world.
In order to reduce the energy consumption of the house, it is clear that if we are able to store the cold temperatures of the night, by night cooling radiation, we will be able to extend the time during which the energy-saving air conditioning method is used, and we will be able to stay within the required temperature comfort zone using a smaller amount of energy.
Heliocol - Magen Eco Energy - Night Radiative Cooling // In order to cool the cold thermal storage tank, the house will circulate cold water through a solar collector array. The optimal cooling potential can be achieved on clear nights, in which the cooling achieved could be 2-3 C below ambient temperatures.
"Energy Packs" - PCM (Phase Changing
Material) Energy Storage System //
A substance with a specific melting or
solidifying temperature, which is capable of
storing and releasing large amounts of
energy. This system is planned to store and
release energy, by using a solid-liquid cycle.
The Solar Decathlon competition challenges 20 student-led teams to design, build,
and operate solar-powered houses that produce at least as much as energy as they use,
while being affordable, livable, and attractive. The winner of the competition is the team that
best blends cost-effectiveness, consumer appeal and design excellence with optimal energy
production and maximum efficiency.
The Solar Decathlon demonstrates innovation in solar and sustainable architecture and
identifies immediately viable technologies. The first competition was held in the United
States in 2002 and it has been held biennially since 2005, with additional competitions in
Europe in 2010 and 2012.
In August 2013, Solar Decathlon China takes place in Datong, China, hosted by the Chinese
National Energy Administration and the U.S. Department of Energy. Team Israel, the first
Israeli team to take part in a Solar Decathlon competition, will construct and operate its
prototype house, competing in ten contests assessing everything from the house's
architectural style and market appeal to the ability of its residents to cook, do laundry and
entertain while conserving energy.
The group's approximately thirty students hail from the fields of architecture, engineering,
interior and industrial design, and environmental studies, supervised by two academic
supervisors, both architects specializing in sustainable design. In addition, the team has
created a large network of academic, government and industry partners. The project's
position at the cutting-edge of sustainable building technologies has garnered extensive
partnerships and industry support.
Team Israel is made up of students from four leading colleges and universities in
Israel incorporating future architects, engineers, and designers: Shenkar College of
Engineering & Design, Tel Aviv University, the College of Management Academic Studies,
and the Neri Bloomfield School of Design. We are proud to be the first Israeli team to
participate in a Solar Decathlon competition.
Our design agenda reflects Israel's dynamic culture, social values and sun-blessed climate.
Participating in the competition is an opportunity for us to demonstrate professional and
social responsibility by presenting a building which aims to be low budget while maintaining
a high standard of architectural and energy design.
Academic CO-directors
Arch. Dr. Joseph Cory
Arch. Chen Shalita
Team Managers
Hadas Pee’r // Team Leader
Veronica Zak // Architecture
Alon Kaplan // Energy
Yulia Lipkin // Interior Design
Liron Dan // Materials
Maya Assif – Ashkenazi // Communications
Yasmeen Lala - Ferro // PR
Naama Romano // Sponsorship
Nir Dubrovsky // Market Appeal
Shula Goulden // Project Manual
Anna Blovshtein // BIM
Team Members
Shy Lev-Ari // Ron Zipory // Diana Marder // Snir Mazula // Yosef Orenstain // Eitan
Abel // Yulia Berezin // Ohad Zlotnick // Alon Haim Shaul // Shiran Nozik // Luda
Dubrovsky // Roi Nuri // Nadav Gofer // Alon Dotan
Yonatan Friedman
Stephan Bahous
Gali Elkovitch
Nick Peykov
Noa Shimoni
// Team Leader 2011-2012
// Architecture Manager 2011-2012
// BIM Manager 2011-2012
// Climate Manager 2011-2012