OEM Vario XXXX OEM Vario XXXX OEM Vario XXXX OEM Vario XXXX----XX hpXX hpXX hpXX hp

technical data

vacuum tube collector OEM Vario 1000-10 hp OEM Vario 2000-20 hp OEM Vario 3000-30 hp

(OEM Vario 800-10 hp) (OEM Vario 1600-20 hp) (OEM Vario 2400-30 hp)

dimension [mm] 2210x750x88 2210x1500x88 2210x2250x88

gross area [m²] 1,65 3,3 4,95

weight [kg] 24 48 72

tube quantity 10 20 30

efficiency η0 [%] * 68,2 (70,3) 68,2 (70,3) 68,2 (70,3)

heat transfer coefficient k1 [W/m²K] / k2

[W/m²k²] * 1,576 / 0,000 (2,224 / 0,005) 1,576 / 0,000 (2,224 / 0,005) 1,338 / 0,000 (2,224 / 0,005)

Peak Power [Wp] 1000 (717) 2000 (1428) 3000 (2146)

energy yield Würzburg 3m² 557kWh/m²a

Absorber

Absorption η / Emission η [%] 96/ 4

Absorber area [m²] 1,63 (0,912) 3,259 (1,824) 4,889 (2,735)

Aperture area [m²] 1,464 (1,017) 3,026 (2,034 4,392 (3,051)

coating TiNOX TiNOX TiNOX

hydraulics

max. operating pressure [bar] 10 10 10

stagnation temperature [°C] ca. 160

volume of heat transfer medium [l] 0,47 0,94 1,41

connection 3/4“EuroConus

*referring aperture area subject to change without notice

as at 2010/10

OEM Vario XXXXOEM Vario XXXXOEM Vario XXXXOEM Vario XXXX----XX hpXX hpXX hpXX hp

Advantages of our heat pipe collector

- max stagnation temperature 160°C

- dry plug-in connection of the tube (tube

easily exchangeable!)

- tube 360° rotateable!

- Tube distance always the same (even if

you connect a number of collectors)

- Low fluid volume

- To be assembled on the roof

- Self supporting construction ( no need

for expensive rack)

- assembling angle 20° to 90°

- Narva vacuum tubes made in Germany

- Collector made in Germany

- Fast and safe assembly with Euroconus

connector - Short energy amortisation