Air Tools & Inflation

REMA TIP TOP Australia Pty LimitedBusiness Unit Automotive

3/20 Worth Street Chullora NSW 2190Phone: +61 (0)2 8755 8400Fax: +61 (0)2 9742 3159www.rema-tiptop.com.au [email protected]

Your local Contact:

REMA TIP TOP –Automotive Product CatalogueAir Tools & Inflation

594 9995

REMA TIP TOP – Automotive Product Catalogue

CoverRTTA_Layout 21 19/12/2012 19:24 Page 1

REMA TIP TOP Australia

3

For futher information please visit our website:http://www.rema-tiptop.com.au

North Queensland South Australia Northern Territory Western Australia

New South Wales Victoria Tasmania Queensland

TOWNSVILLE2/355 Bayswater Rd,Garbutt, QLD 4814PH: 07 4728 1953FAX: 07 4779 6822

ADELAIDE11 Lafitte Road, Wingfield, SA 5013PH: 08 8169 2800FAX: 08 8162 5607

DARWINUnit 6/6 Steele Street, Winnellie, NT 0820PH: 08 8947 1638FAX: 08 8947 1648

PERTH2/1-9 Kurnall RoadWelshpool, WA 6108PH: 08 6253 1900FAX: 08 9356 2831

SYDNEY3/20 Worth Street, Chullora, NSW 2190PH: 02 8755 8400FAX: 02 9742 3159

MELBOURNE14/101-107 Wedgewood Rd,Hallam, VIC 3803PH: 03 9703 3111FAX: 03 9794 5615

LAUNCESTON10 High Street,Longford, TAS 7301PH: 0418 230 252FAX 03 6391 2000

BRISBANE10 Success Street, Acacia Ridge, QLD 4110PH: 07 3710 8888FAX: 07 3274 1472

3

Launceston

Sydney

Melbourne

Brisbane

Townsville

Adelaide

Darwin

Perth

2-6_Layout 1 18/12/2012 14:03 Page 3

140 – 141

142 – 143

144

145 – 149

149 – 151

151 – 153

Impact Wrenches............................

Other Air Tools.....................................

Air Tool Accessories..................................

Tyre Inflation..............................................

Airline Hoses and Reels...................

Airline Fittings..............................................

Outstanding products

Air Tools and Inflation

E

Air buffer K1-4425-HO Page 142Impact wrenchCP 7782-6 Page 141 Digital tyre inflator Page 147

139

E_Layout 2 18/12/2012 13:53 Page 139

140

E


Impact Wrenches

Ref. No. Description Air inlet DriveMaxTorque Speed

Average airconsumption Weight

160567 Impact wrench KI-8571-2 1/4” 1/2” 813 Nm 7,000 rpm 124 l/min 2.97 kg

160561 Impact wrench KI-8571-2 kit• comes with sockets

1/4” 1/2” 813 Nm 7,000 rpm 124 l/min 2.97 kg

109930 Impact wrench CP 7748-2 composite 1/4” 1/2” 1250 Nm 8,200 rpm 150 l/min 2.25 kg

109936 Impact wrench CP 749-2 1/4” 1/2” 827 Nm 6,400 rpm 156 l/min 2.6 kg

109933 Impact wrench CP749 kit• comes with sockets

1/4” 1/2” 827 Nm 6,400 rpm 156 l/min 2.5 kg

109946 Impact wrench CP 7733-2 1/4” 1/2” 746 Nm 6,900 rpm 132 l/min 2.7 kg

160502 Impact wrench IR131-2 1/4” 1/2” 575 Nm 8,000 rpm 119 l/min 2.6 kg

1/2 inch drive

160567 (wrench only)160561 (kit)

109930 109936

109933 109946 160502

E_Layout 2 18/12/2012 13:53 Page 140

141

E


3/4 inch drive

109914 109907 109916



109914 Impact wrench CP 7763-6 3/8” 3/4” 1627 Nm 6,300 rpm 210 l/min 6.3 kg109907 Impact wrench IR2141 composite 3/8” 3/4” 1224 Nm 7,250 rpm 269 l/min 3.2 kg109916 Impact wrench IR261-6 3/8” 3/4” 1224 Nm 5,500 rpm 269 l/min 9.5 kg160566 Impact wrench KI-22 3/8” 3/4” 1016 Nm 6,500 rpm 198 l/min 4.55 kg160495 Impact wrench K1-22-3 3/8” 3/4” 1016 Nm 6,500 rpm 198 l/min 5.35 kg160500 Impact wrench K1-22-6 3/8” 3/4” 1016 Nm 6,500 rpm 198 l/min 6.15 kg109893 Impact wrench CP 7769-6 composite 3/8” 3/4” 1950 Nm 7,000 rpm 219 l/min 4 kg

160566 (short anvil)160495 (3” anvil - pictured)

160500 (6” anvil)

109893

1 inch drive



160568 Impact wrench KI-1838 1/2” 1” 2172 Nm 5,000 rpm 255 l/min 8.1 kg

109891 Impact wrench CP 7780-6 1/2” 1” 2320 Nm 5,000 rpm 336 l/min 7.7 kg

109890 Impact wrench CP 7782-6 1/2” 1” 2900 Nm 5,200 rpm 288 l/min 11.6 kg

160568 109891 109890

E_Layout 2 18/12/2012 13:53 Page 141

142

E


Ref. No. Description Model Speed109899 Grinder super duty KI-6970-SL 14,000 rpm160496 Angle grinder KI-6803-XSL 4” 13,600 rpm160701 Grinder KI-6206-IN 22,000 rpm160702 Grinder KI-4401 25,000 rpm109972 Grinder CP 871 22,000 rpm

Accessories:160531 Exhaust hose (2m)

For use with:• Air grinder CP 871 (109972), KI-4401 (160702), CP 873 (109973)

Air grinders

109899 160496 160701

160702 109972 160531

Air buffers• For buffing and grinding work, rear exhaust through hose

Ref. No. Description Model Rotating speed109905 OTR Air buffer

• with lateral exhaust hoseUG-1250-LM 7,200 rpm

109900 Air bufferFor use with:• Quick coupling QC3/8 - 24" (519 6603)

UG-65-EBL 14,600 rpm

160540 Air buffer KI-4425-HO 3,000 rpm109973 Air buffer CP 873 2,500 rpm

109905 109900 160540 109973

Other Air Tools

E_Layout 2 18/12/2012 13:53 Page 142

143

E


Air drills

Air inlet Chuck size SpeedAverage airconsumption Weight

1/4” 3/8” 1,800 rpm 113 l/min 0.98 kg 160538

170235

Patch hammers• For the application of large, multi-ply repair patches to car, truck and EM tyres

Ref. No. Description WeightOperatingpressure

517 4450 Patch hammer, compact• with plastic ram

1.0 kg 6 - 8 bar

517 3602 Patch hammer, large• with metal ram

1.9 kg 6 - 8 bar

Accessories:517 3626 Metal ram

For use with:• Patch hammer (517 3602))

517 4450

Vacuum cleaner• For removal of dust and water from the tyre

Ref. No. Description170235 Vacuum cleaner for dust/water, pneumatic

Needle scalers

Ref. No. Description160950 Needle Scaler NS 4120 160950

Ref. No. Description160538 KI-863-KC Reversible

517 3602

Ref. No. Description Nozzle type Inlet thread108250 Blow gun 100 mm std. 1/4” BSP (F)

108454 Blow gun 150 mm std. 1/4” BSP (F)

Air sprayers108250

108454

E_Layout 2 18/12/2012 13:53 Page 143

144

E


Air tool maintenance

Ref. No. Description Content110080 Air Tool Oil

• Specifically developed for the maintenance of air tools• Always ensures reliable motor lubrication through the air connection,

and prevents rust build-up in the drive unit• Increased service life of tools• Prevents the build-up of residue of resins, dirt, rust particles etc.• Danger class 0

1 litre

110082 Air Tool Oil 120 ml

110084 Air Tool Oil 591 ml

109970 Air Tool Oil Grease 2 lb

109969 Mini grease gun

110080 110082 110084 109970 109969

Tool holders

Ref. No. Description109964 Air Tool Holder CP9841, magnetic

109964

Air Tool Accessories

E_Layout 2 18/12/2012 13:53 Page 144

145

E


Tyre inflating connectors, clip-on

Tyre Inflation

Ref. No. Description102210 Clip-on chuck Alligator,

closed end• • •

103434 Clip-on chuck, 315closed end

• • •

102220 Clip-on chuck AC18, closed end

• • •

102225 Clip-on chuck AC18F, open end

• • •

102235 Clip-on chuck 7148, open end

•

102236 Clip-on chuck 7150, closed end

•

102237 Clip-on chuck 4660A EM, closed end

•

102245 Clip-on chuck 4660A EM Haltec, closed end

•

157006 Clip-on connector, V-3031open end, 6mm hose

• • •

562 5095 Clip-on connector, V-3031open end, 8mm hose

• • •

157007 Clip-on connector V-3031-08closed end, 6mm hose

562 8195 Valve deflator

Accessories103506 Air chuck 315 repair kit102221 Air chuck AC18 spare rubber-seal102238 Air chuck 4660A EM repair kit102246 Air chuck 4660A-OP Haltec repair kit

102210 103434 102220 102225 102235 102236

102237 102245 157006 562 5095 157007 562 8195 102238

E_Layout 2 18/12/2012 13:54 Page 145

146

E


Ref. No. Description102227 Dual foot chuck, AC26T

• Closed end• Tapered tip

102228 Dual foot chuck, AC26TF• Open end• Tapered tip

108378 Dual foot chuck, 03-0472• Closed end

157025 Dual foot chuck• Open end

Tyre inflating connectors, push on

Ref. No. Description102226 Dual foot chuck, AC25T

• Closed end

103548 Single foot chuck, CH-300• Closed end

103550 Dual foot chuck, AC25• Closed end

103555 Dual foot chuck, AC25 long• Closed end

103551 Dual foot chuck, AC23• Closed end

Tyre inflating connectors, lock on

Ref. No. Description103438 Single foot chuck, EX666 long

• Closed foot

103439 Single foot chuck, 377 long• Closed foot

Tyre inflating connectors, lock on EM

102227

102228

108378

157025

102226

103550

103555

103438

103439

103458

103551

E_Layout 2 18/12/2012 13:54 Page 146

147

E


Digital tyre inflators

Ref. No. Description160600 Digital tyre inflator PCL Qube

• 3 mode settings- Standard inflate/deflate- Preset pressure- Nitrogen conversion

• 3 pressure readings- PSI; BAR; kPa

• Ceramic sensor ensures accuracy +/- 0.5%• Inflates accurately with hoses up to 50 metres long

Includes:• 5 metre long quality rubber hose• Clip or chuck• Wall mount bracket• 1/4 BSP female air inlet connection• 240 volt AC power lead with 3 pin plug

Digital hand-held tyre inflation gauges

Ref. No. Description108316 Digital tyre inflation gauge

Ref. No. Description160620 Digital tyre inflator Clipsal 89MXA

• Can be used with normal compressed air or nitrogen• Maximum inflation pressure 120 PSI• Inflates faster than normal inflation devices mounted to tyre changers• Ensures all tyres are inflated to the same pressure• Pressure setting can only be adjusted before the air line is attached to the

valve

Ref. No. Description160602 Digital automatic tyre inflator

• Aluminium die cast housing• Large backlit LCD display• Can be used with hoses up to 50m long• Accuracy +/- 0.3psi• 0-145psi, 0.5-10bar, 0-1000kPa, 0-10kg/cm2

• Includes equivalent Nitto adaptor

160600

160620

160602

108316

E_Layout 2 18/12/2012 13:54 Page 147

148

E


Hand-held tyre inflation gauges

Ref. No. Description Measuring range108302 Inflation gauge 4 metre hose complete 0-230 PSI108303 Inflation gauge Premium 0-160 PSI108313 Inflation gauge 0-160 PSI108321 Inflation gauge low pressure 0-15 PSI108322 Inflation gauge Econo 20-160 PSI108333 Inflation gauge 0-220 PSI108350 Inflation gauge TDR-2000 0-138 PSI519 9356 Inflation gauge Wonder 1991 0-170 PSI

Accessories:519 9358 Replacement hose for 1991 gauge (519 9356)108334 4m spare hose, to suit gauge (108333)

108302 108303 108313

108321 108322 108333

108350 519 9356

E_Layout 2 18/12/2012 13:54 Page 148

149

E


Hand-held inflation device for EM tyres

Ref. No. Description103508 Inflation device inflate, large bore, 1-401170350 Inflation device, dual standard/large bore, 5m

Hand-held master pressure gauge

Ref. No. Description108300 Master pressure gauge

• for the testing of any type of gauge• with certification 108300

Coiled airline hose without fittings

• PUC quality airline 20 meter lengths• For air/water

Coiled rubber hose fitted• Heavy duty reinforced rubber hose• Outer casing with fine bleed holes• Rated to 300 psi• Supplied with 1/4 BSP fitting swagged to the hose

Ref. No. DescriptionInternaldiameter Colour Length

109835 Coldflex hose 6 mm black 20 m109836 Coldflex hose 8 mm black 20 m109837 Coldflex hose 10 mm black 20 m109838 Coldflex hose 12 mm black 20 m 109837


109806 Rubber hose 10 mm red 15 m109808 Rubber hose 12.5 mm red 15 m 109806

Airline Hoses and Reels

170350

Pressure regulators

Ref. No. Description180350 Air line filter regulator/ lubricator

• Comes with gauge180350

E_Layout 2 18/12/2012 13:54 Page 149

150

E


Hose clamps• High-quality material• Screw saddle and band made of stainless steel• Slotted hexagon screw: galvanized steel

Ref. No. Description Clamping range Band width108492 Hose clamp 8-12 mm 10 mm109719 Hose clamp 10-16 mm 10 mm109720 Hose clamp 12-18 mm 10 mm

109720108492 109719

Recoil hose

• Polyurethane with reinforced fitted ends


109865 Recoil hose 8 mm blue 10 m

Hose reels

• Self retracting quality hose and fittings• Australian made


108495 Recoila hose reel 10 mm red 15 m108496 Recoila hose reel 12 mm red 15 m108498 Recoila Industrial hose reel 10 mm red 20 m

109865

108495

Air manifolds

Ref. No. Description109800 Air Spider Kit

Includes:• 6 Airline hoses• Air pressure gauge• Air filter/ regulator

Accessories109799 Air filter/ regulator for 109800 (one)109800 109799

E_Layout 2 18/12/2012 13:54 Page 150

151

E


Hose clips

• Clip on hose clamp• Squash clips to tighted clamp• Un-obtrusive no bulky clamping screw

Ref. No. Description Clamping range Band width109717 OTK Hose clip 11-13 mm 10 mm109718 OTK Hose clip 15-18 mm 10 mm109722 OTK Hose clip 13-15 mm 10 mm

RYCO series

Ref. No. Description Thread Hose diameter108000 Coupler F907 3/8" female108001 Coupler 200 1/4" female108002 Coupler 201 1/4" male108025 Coupler F900 1/4" female108155 Coupler 3/8" female108460 Coupler F912108004 Fitting 2025 1/4" male108006 Fitting 2035 1/4" female108008 Fitting 205 1/4"108009 Fitting 266 5/16"108018 Fitting F914 3/8" male108167 Fitting 253 3/8" male108011 Barb 207 1/4" male 1/4"108012 Barb 208 1/4" male 5/16"108013 Barb 209 1/4" male 3/8"108014 Barb 210 1/4" male 1/2"108016 Barb 1/2" male 3/8"108017 Barb 3/8" male 3/8"108020 Fitting 217 VG8 female108034 Double barb 229 3/8”108043 Barb 237 1/4" female 5/16”108044 Barb 236 1/4" female 3/8”108053 Double barb 258 1/2”108010 Fitting 206A 3/8”

Airline Fittings

108000108001108155

108002

108025 108460

108004108167

108006

108011 108012

108013108016108017

108014

108020 108034

108043 108044

108053 108010108008108009

E_Layout 2 18/12/2012 13:54 Page 151

152

E


CEJN series

Ref. No. Description Thread Hose diameter108224 Coupler 1202 1/4" female108225 Coupler 1155 1/2" male108226 Coupler 1204 3/8" female108227 Coupler 1154 3/8" male108230 Coupler 1205 1/2" female108232 Coupler 1004 3/8”108235 Coupler 1152 1/4" male108241 Coupler 1005 1/2”108220 Fitting 5004 3/8”108221 Fitting 5204 1/4” female108223 Fitting 5152 1/4" male108228 Fitting 5204 3/8" female108229 Fitting 5154 3/8" male108231 Fitting 5205 1/2" female108242 Fitting 5005 1/2”108244 Fitting 5155 1/2" male108245 Fitting VG8 VG8 female108246 Fitting VG12 VG12 female

JAMEC PEM series

Ref. No. Description Thread Hose diameter109002 Coupler 310M4 1/4" male109005 Coupler 310F4 1/4" female109073 Fitting 31M4 1/4" female109089 Fitting 31F4 1/4" male, 1/4” female109239 T-Piece MFF 3/8”109241 T-Piece BT6 1/2”109242 T-PieceBT8 3/8”109246 T-Piece T6TM4 1/4" male109281 Hex fitting HN4 1/4" male109284 Hex fitting HN8 x4 1/2" male, 1/4” male109342 Reducing bush RB4 x2 1/4" male, 1/8” female109343 Reducing bush RB6 x4 3/8" male, 1/4” female109344 Reducing bush RB8 x4 1/2" male, 1/4” female109346 Adaptor FM6 x4 1/4" male, 3/” female109282 Hex fitting 1/4" male 1/4" male

109002 109005

109073 109089

109239 109241109242

109281109282

109343109344

109346

108224 108225

108232 108235

108241 108220

108221108228

108223

108229 108231

108242 108245

108246

108226 108227

E_Layout 2 18/12/2012 13:54 Page 152

153

E


Sealing tape

Ref. No. Description115928 Teflon thread sealing tape

115928

NITTO series

Ref. No. Description Thread Hose diameter152011 Coupler 20SM 1/4" male152013 Coupler 20SF 1/4" female152015 Coupler 20SH 5/16”152020 Coupler 30SF 3/8" female152025 Coupler 30SH 3/8”152030 Coupler 30SM 3/8" male152101 Coupler 40SM 1/2" male152102 Coupler 40SH 1/2"152104 Coupler 40SF 1/2" female152005 Fitting 20PM 1/4" male152006 Fitting 20PH 1/4"152007 Fitting 25PH 5/16"152009 Fitting 20PF 1/4" female152017 Fitting VG8 VG8 female152018 Fitting VG12 VG12 female152019 Fitting 30PH 3/8”152021 Fitting 30PF 3/8" female152023 Fitting 30PM 3/8" male152100 Fitting 40PH 1/2”152103 Fitting 40PM 1/2" male152150 Fitting 20PM Rotary 1/4" male

152011152030152101

152013152104

152015152025152102

152020

152005 152006152007152100

152009 152017

152018 152019

152021 152023152103

152150

E_Layout 2 18/12/2012 13:54 Page 153

154

E


Safety inflation cages

Ref. No. Description113315 Safety cage 460 x 1220 x 1220 with certification

for use with:• 1 truck tyre• Engineer approval to withstand a catistrophic tyre/wheel failure

113321 Safety cage 700 x 1450 x 1450 with certificationfor use with:• 1 wide single tyre• Engineer approval to withstand a catistrophic tyre/wheel failure

113325 Safety cage 305 x 915 x 915for use with:• 1 light truck tyre

113315 113321

Safety inflation straps

Ref. No. Description113309 Rim safety restraint 1400 x 24

• For road side fitters to safely inflate small EM/Grader wheels• Can be anchored to the floor

113310 Rim safety restraint 11.22.5• For road side fitters to safely inflate small light truck/truck bus wheels• Can be anchored to the floor

113309

E_Layout 2 18/12/2012 13:54 Page 154

167

REMA TIP TOP – Product Catalogue

Editor:

REMA TIP TOP Australia Pty LimitedBusiness Unit AutomotiveBuilding 3/20 Worth StreetChullora NSW 2190Phone +61 (0)2 8755 8400Fax +61 (0)2 9742 3159E-Mail [email protected]

Legal Notice:

Copyright© 2012REMA TIP TOP Australia Pty Limited

All information is given to the best of our knowledge. All spec - ifications are to be considered non-binding information. Anyclaim for damages of any kind is excluded. We reserve theright to change technical specifications without prior notice,provided that they ensure product improvement. The informa-tion presented is based on technical experience but does notguarantee a product´s suitability for specific applications, anddoes not relieve the users of the responsibility to undertaketheir own testing, including where any third-party trademarkrights are concerned. Pictures in the catalogue may containoptional accessories which are not included in the standardshipment, and need to be ordered additionally.

All relevant product information can be found in the respectivedocuments, including operating instructions, technical datas-heets as well as conditions for storage and application. The specified qualities of our products are based on informa-tion from the accompanying inspections for approval. They re-present statistical product data and are not to be consideredas guaranteed properties of an individual product.In order to preserve product properties, the storage conditionsindicated in DIN 7716 should be followed (including storing theproduct in the original package and in an area that is dry, cooland dark).

Attention:

Unless otherwise noted, the content is one and will not be listed separately.

F_Layout 2 20/12/2012 08:19 Page 167

183183

General Terms and Conditions for Sales, Delivery and Payment

Rema takes pride in the quality of its products and its servicesto customers. Customers are requested to inform Rema if anorder is incorrectly delivered or if there is dissatisfaction with thegoods.

These Trading Terms and Conditions (“Terms”) are current fortrading with Rema at the time of issue, however the Terms maybe varied by Rema from time to time.

1. Definitions“Additional Charges” includes all delivery, handling and stor-age charges, goods and services tax, stamp duty, interest, legaland other costs of recovery of unpaid money and all other gov-ernment imposts and all money, other than the Purchase Price,payable by the Customer to Rema arising out of the sale of theGoods.“Customer” means the person to or for whom the Goods aresupplied by Rema.“Goods” means the goods sold to the Customer by Rema.“List Price” means that price in force on the date of receipt ofCustomer’s order by Rema.“Rema” means Rema Tip Top Asia Pacific Pty Ltd (ACN 104702 614) or one of its subsidiaries being Rema Tip Top AustraliaPty Ltd (ACN 003 380 827) or Rema Tip Top Industrie Pty Ltd(ACN 121 411 229) or Rema Tip Top Industrial Australia Pty Ltd(ACN 110 697 624) or RemaTip Top Holdings Pty Ltd (ACN 104 705 571).“Purchase Price” means the List Price of the Goods or suchother price as may be agreedby Rema and the Customer prior to delivery of the Goods.

2. Order for GoodsAn order given to Rema is binding on Rema and the Customerif:written acceptance is signed by or on behalf of Rema; orthe Goods are supplied by Rema in accordance with the order.An acceptance of the order by Rema is then to be an accept-ance of these conditions of sale by Rema and the Customer andthese Terms will override any conditions contained in theCustomer’s order. Rema reserves the right to accept a part onlyof any order by notifying the Customer in writing or by deliveringthe Goods to the Customer. No order is binding onRema until accepted by it.

An order which has been accepted in whole or in part by Remacannot be cancelled by the Customer without obtaining the priorwritten approval of Rema, which it may refuse in its absolute dis-cretion.

3. PricesThe Customer must pay the Purchase Price and the AdditionalCharges, unless otherwise agreed in writing, to Rema.

4. Retention of Title4.1 Goods are supplied only on the condition that they remainthe property of Rema until payment is made in full of the Pur-chase Price and any interest owed thereon. In addition to anyother rights that Rema may have, and in the event that: pay-ment for goods in not made upon due date, or prior to pay-ment in full , the Customer is bankrupt, becomes insolvent ora receiver or trustee is appointed over the Customer's prop-erty or the Customer makes a general assignment for the ben-efit of its creditors or a voluntary or involuntary petition underany bankruptcy laws is filed with respect to the Customer, thenRema or its authorized representative may enter upon thepremises of the Customer with or without notice and retakepossession of any Goods in respect of which title has not atthat date passed to the Customer If the Goods cannot be distinguished from similar Goodswhich the Customer claims to have paid for in full, Rema mayin its absolute discretion seize all goods matching the descrip-tion of the Goods and hold same for reasonable period so thatthe respective claims of Rema and the Customer can be as-certained. Rema must promptly return to the Customer anygoods the property of the Customer and Rema is in no way li-able or responsible for any loss or damage to Goods or for anloss or destruction to the Customer’s business howsoeverarising from the seizure of the Goods. In the event that theCustomer sells the Goods prior to payment in full, then theCustomer must hold the proceeds of such sale in trust forRema. The Customer will pay Rema such funds held in trustupon demand of Rema.

5. Personal Property and Securities Act 2009 (“PPSA”)5.1 Defined terms in this clause have the same meaning asgiven to them in the PPSA.5.2 Rema and the Customer acknowledge that these Termsconstitute a Security Agreement and give rise to a Purchase

Money Security Interest (PMSI) in favour of Rema over theGoods supplied or to be supplied to Customer as Grantor pur-suant to these Terms.5.3 The Goods supplied or to be supplied under these Termsfall within the PPSA classification of ”Other Goods” acquiredby Customer pursuant to these Terms.5.4 Rema and Customer acknowledge that Rema, as Se-cured Party, is entitled to register its interest in the Goods sup-plied or to be supplied to Customer, as Grantor, under theseTerms on the PPSA Register as Collateral.5.5. Customer waives its right to receive notification of or acopy of any Verification Statement confirming registration ofa Financing Statement or a Financing Change Statement re-lating to a Security Interest granted by Customer, as Grantor,to Rema.5.6. Customer agrees to indemnify Rema on demand for allcosts and expenses, including legal costs and expenses ona solicitor / client basis, associated with the;a) registration or amendment or discharge of any FinancingStatement registered by or on behalf of Rema; andb) enforcement or attempted enforcement of any Security In-terest granted to Rema by Customer. 5.7. The Customer agrees:a) that, to the extent permitted at law, nothing in sections 130to 143 of the PPSA will apply to these Terms or the Securityunder these Terms;. b) to waive its right to do any of the following under the PPSA:

i) receive notice of removal of an Accession under section95;ii) receive notice of an intention to seize Collateral undersection 123;iii) receive notice of disposal of Collateral under section130;iv) receive a Statement of Account if there is no disposalunder section 130(4);v) receive notice of retention of Collateral under section135;vi) redeem the Collateral under section 142;vii) reinstate the Security Agreement under section 143;viii) object to the purchase of the Collateral by the Se-cured Party under section 129; andix) receive a Statement of Account under section132(3)(d) following a disposal showing the amounts paidto other Secured Parties and whether Security Interestsheld by other Secured Parties have been discharged.

6. Delivery6.1 Delivery will be as specified on the Form overleaf. Theterms used mean: “ex•works”: Customer for his carrier takesdelivery of Goods and risk passes to the Customer at Rema’swarehouse;“FOB”/“FOR”/ “FOT”: Delivery by Rema to the specified modeof transport. Risk passes to the Customer when the Goodsare loaded on to the transport and transport is at theCustomers expense;“CIF”: Goods are delivered to the Customer’s nominated de-livery place at Rema expense and risk passes to the Cus-tomer at the time of unloading at the delivery address;“F & F”: Goods are freighted to Customer at Rema expensebut are at Customer’s risk from the time of loading on to therelevant transport.“FIS”: Goods are delivered into the Customer’s store at Remaexpense and risk passes to the Customer at the entry pointto the Customer’s store.6.2 Where none of the terms referred to in Clause 5.1 arespecified on the Form overleaf, risk shall be deemed to passon delivery of the Goods to the Customer’s premises.6.3 The times quoted for delivery are estimates only andRema accepts no liability for failure or delay in delivery ofGoods. The Customer is not relieved of any obligation to ac-cept or pay for Goods by reason of any delay in delivery.Goods may be delivered by instalments at the discretion ofRema.6.4 To the extent permitted by law, if the Customer cancels itsorder at any time prior to delivery but before the Goods areready for dispatch, Rema reserves the right to invoice theCustomer for all expenses involved in the preparation of theorder.

7. Payment7.1 Providing that credit terms have been approved in writingby Rema, payment is required prior to the end of the calendarmonth following that in which the invoice is raised.7.2 If the Customer is in default, Rema may at its option, with-hold further deliveries or cancel a contract without prejudiceto any of its existing rights.7.3 If credit terms have not been approved payment is re-quired by cash on delivery.

7.4 Interest shall be charged upon amounts outstanding afterthe due date for payment, at the rate of 18% per annum cal-culated on a daily basis until the date of payment is receivedby Rema.7.5 All amounts payable by Customer under these Terms mustbe paid without set-off or counterclaim of any kind.

8. Returns8.1 Except where there is a breach of a consumer guaranteeand subject to the AustralianConsumer Law;a) Goods for credit must be returned to the point of dispatchat the Customer's expense within twenty-one days of invoicedate. Invoice number and date must be quoted and the Goodsmust be in their original condition, no allowance being madefor wear and tear;b) no credit shall be issued for Goods returned in excess oftwenty-one days from the date of original invoice or for Goodssupplied specially to Customer's requirements.

9. Warranties & Conditions9.1 Rema’s liability in respect of a breach of a consumer guar-antee for any Goods not of akind ordinarily acquired for personal, domestic or householduse is limited, to theextent permissible by law and at Rema’s option;a) in relation to the Goods:

i) the replacement of the products or the supply of equiv-alent products;ii) the repair of the products;iii) the payment of the cost of replacing the products or ofacquiring equivalentproducts; oriv) the payment of the cost of having the products re-paired.b) in relation to the services:i) the supply of the services again; orii) the payment of the cost of having the services suppliedagain.

9.2 To the extent permitted by law, all other warranties whetherimplied or otherwise, not set out in these Terms are excludedand Rema is not liable in contract, tort (including, without lim-itation, negligence or breach of statutory duty) or otherwiseto compensateCustomer for:a) any increased costs or expenses;b) any loss of profit, revenue, business, contracts or antici-pated savings;c) any loss or expense resulting from a claim by a third party;ord) any special, indirect or consequential loss or damage ofany nature whatsoever caused by Rema’s failure to completeor delay in completing the order to deliver the Goods or byRema’s breach of any of the provisions in these Trading Termsand Conditions.9.3 Any claims to be made against Rema for short delivery ofGoods must be lodged with Rema in writing within 14 days ofthe delivery date, unless agreed to by the parties otherwise.9.4 To the full extent permitted by law, the Customer will in-demnify Rema and keep Rema indemnified from and againstany claims made against Rema in respect of any loss, dam-age, death or injury arising directly or indirectly from or in con-nection with the contract formed pursuant to these Terms andthe Customer further agrees to indemnify Rema against alllosses and expenses which Rema may sustain as a result ofany breach, act or omission arising directly or indirectly fromor in connection with any breach of these Terms by the Cus-tomer or its representatives.

10. Governing Law and JurisdictionThese Terms shall be governed by and construed in accordancewith the law in effect in New South Wales and the parties heretoaccept the jurisdiction of the Courts of New South Wales in re-lation to any dispute between them and in so far as the ViennaConvention for the International Sale of Goods might otherwisegovern the terms of sale, its application to these Terms is ex-cluded.

11. GeneralAny conditions found to be void, unenforceable or illegal may,to that extent be severed from these terms and conditions.These Terms contain all of the terms and conditions of the con-tract between the parties and may only be varied by agreementin writing between the parties. No waiver of any of these Termsor failure to exercise a right or remedy by Rema will be consid-ered to imply or constitute a further waiver by Rema or the sameor any other term, conditions, right or remedy.

The conditions specified above apply to all sales of goods byREMA TIP TOP. Please read the conditions carefully acceptanceof this sale form by the purchaser constitutes the purchaser'sacceptance of these terms and. in the absence of acknowledg-ment. The delivery of the goods and acceptance of such deliveryby the purchaser shall constitute a binding contract comprisedof these terms and conditions

REMA TIP TOP Australia Pty LimitedBusiness Unit AutomotiveBuilding 3/20 Worth StreetChullora NSW 2190

Phone +61 (0)2 8755 8400Fax +61 (0)2 9742 3159E-Mail [email protected]

F_Layout 2 20/12/2012 08:20 Page 183

REMA TIP TOP Australia Pty LimitedBusiness Unit Automotive

3/20 Worth Street Chullora NSW 2190Phone: +61 (0)2 8755 8400Fax: +61 (0)2 9742 3159www.rema-tiptop.com.au [email protected]

Your local Contact:

REMA TIP TOP –Automotive Product Catalogue

$10.00

594 9995

REMA TIP TOP – Automotive Product CatalogueCoverRTTA_Layout 21 19/12/2012 19:24 Page 1

Documents

Air Tools & Inflation