Air Tools ALLINTON ENGINEERING & TRADING PTE LTD 331 Jalan Besar Singapore 208983 T65 6296 0679 W allinton.com.sg E [email protected] Abrasive Abrasive Flap Discs Type ‘B’ – Lightweight Type ‘C’ – Lightweight Available in Types ‘A’, ‘B’ & ‘C’ Unicut Flap Discs are available in Zirconium or Aluminium Oxide cloth in a full range of grits and in a choice of three different styles: Heavy-Duty (Type A), Lightweight (Type B), and Lightweight Flat (Type C) ranges. The discs have been developed primarily to replace sanding discs and in some applications have advantages over depressed centre grinding discs, particularly on light gauge sheet and where finish is important such as on stainless steel. No backing pads are required – the discs fit directly on to your machine. Unicut Flap Discs are constructed from overlapping flaps of the highest quality abrasive cloth. As the flaps wear down, new abrasive is continuously exposed, ensuring a constant finish throughout the long life of the disc. New Improved Angled Backing Plate The angle of the flaps on Type A and Type B Flap Discs have previously been achieved by building up layers of resin onto the backing plate. The new design of the Unicut backing plate allows the angle of the flaps to be created with reduced resin saturation of the cloth, this results in more usable cloth being available, therefore increasing the optimum performance period of the discs. Approved Unicut Flap Discs are completely safe for use on any angle grinder. The discs are rated for use at 80 m/s having been tested at 150 m/s and approved by the Grinding Wheel Authority – A safety standard recognised throughout the world as the most stringent of tests. Zirconium Flap Discs are ideally suited to the grinding and finishing of Stainless Steel. Every Stainless Steel Fabricator who has used Sanding Discs will know how they can glaze and stop cutting. Zirconium was developed especially for the tough grinding applications and the laminated construction of the Flap Discs ensures that it keeps cutting effectively. Experience in the field on a wide variety of applications and metals has shown that Zirconium coated abrasives out perform Aluminium Oxide by a good margin. Advantages of Unicut Flap Discs • EXCELLENT finish in one operation. • Suitable for a wide range of steels, other metals and materials. • Cooler grinding – less blueing. • Reduced downtime. • Constant finish throughout long life. • Maximum use can be made of cloth – less waste. G24 Stock Code AG00143 AG00144 AG00145 AG00146 AG00147 AG00148 AG00149 AG00150 G36 Stock Code AG00151 AG00152 AG00153 AG00154 AG00155 AG00156 AG00157 AG00158 G40 Stock Code AG00159 AG00160 AG00161 AG00162 AG00163 AG00164 AG00165 AG00166 G50 Stock Code AG00167 AG00168 AG00169 AG00170 AG00171 AG00172 AG00173 AG00174 G60 Stock Code AG00175 AG00176 AG00177 AG00178 AG00179 AG00180 AG00181 AG00182 G80 Stock Code AG00183 AG00184 AG00185 AG00186 AG00187 AG00188 AG00189 AG00190 G120 Stock Code AG00191 AG00192 AG00193 AG00194 AG00195 AG00196 AG00197 AG00198 Size Type Max Speed 4 1 /2 4 1 /2 • Rapid stock removal with finer finish in one operation. • Easier to control – less tiring to use. • No backing pad required. • Lower noise level. • Reduced clogging and glazing. • All sizes can be used on top speed machines. Zirconium Type UNICUT Bevel Flexidisc Stock Code AG12574 AG12575 AG12576 AG12577 AG12578 AG12579 AG12580 AG12581 AG12582 AG12583 Size 115 mm 115 mm 115 mm 115 mm 115 mm 180 mm 180 mm 180 mm 180 mm 180 mm Type #36 #40 #60 #80 #120 #36 #40 #60 #80 #120 Aluminium Type Stock Code AG12584 AG12585 AG12586 AG12587 AG12588 AG12589 AG12590 AG12591 AG12592 AG12593 Size 115 mm 115 mm 115 mm 115 mm 115 mm 180 mm 180 mm 180 mm 180 mm 180 mm Type #36 #40 #60 #80 #120 #36 #40 #60 #80 #120 92 UNICUT Allinton Catalogue 2017 15.08.2017.indd 92 15/8/17 4:30 pm

Abrasive Air Tools - Allinton

Download PDF Report

Upload
others
View
1
Download
0

Embed Size (px)

Citation preview

Air Tools

ALLINTON ENGINEERING & TRADING PTE LTD331 Jalan Besar Singapore 208983T65 6296 0679 W allinton.com.sg E [email protected]

Abrasive

rasive

Trading Pte Ltd

Flap DiscsType ‘B’ – Lightweight Type ‘C’ – Lightweight

Available in Types ‘A’, ‘B’ & ‘C’

Unicut Flap Discs are available in Zirconium or Aluminium Oxide cloth in a full range of grits and in a choice of three different styles:

Heavy-Duty (Type A), Lightweight (Type B), and Lightweight Flat (Type C) ranges. The discs have been developed primarily to replace sanding discs and in some applications have advantages over depressed centre grinding discs, particularly on light gauge sheet and where finish is important such as on stainless steel. No backing pads are required – the discs fit directly on to your machine.Unicut Flap Discs are constructed from overlapping flaps of the highest quality abrasive cloth. As the flaps wear down, new abrasive is continuously exposed, ensuring a constant finish throughout the long life of the disc.

New Improved Angled Backing PlateThe angle of the flaps on Type A and Type B Flap Discs have previously been achieved by building up layers of resin onto the backing plate. The new design of the Unicut backing plate allows the angle of the flaps to be created with reduced resin saturation of the cloth, this results in more usable cloth being available, therefore increasing the optimum performance period of the discs.

ApprovedUnicut Flap Discs are completely safe for use on any angle grinder. The discs are rated for use at 80 m/s having been tested at 150 m/s and approved by the Grinding Wheel Authority – A safety standard recognised throughout the world as the most stringent of tests.

Zirconium Flap Discs are ideally suited to the grinding and finishing of Stainless Steel. Every Stainless Steel Fabricator who has used Sanding Discs will know how they can glaze and stop cutting. Zirconium was developed especially for the tough grinding applications and the laminated construction of the Flap Discs ensures that it keeps cutting effectively. Experience in the field on a wide variety of applications and metals has shown that Zirconium coated abrasives out perform Aluminium Oxide by a good margin.

Advantages of Unicut Flap Discs• EXCELLENT finish in one operation.• Suitable for a wide range of steels, other metals and materials.• Cooler grinding – less blueing.• Reduced downtime.• Constant finish throughout long life.• Maximum use can be made of cloth – less waste.

G24Stock Code

AG00143AG00144AG00145AG00146AG00147AG00148AG00149AG00150

G36Stock Code

AG00151AG00152AG00153AG00154AG00155AG00156AG00157AG00158

G40Stock Code

AG00159AG00160AG00161AG00162AG00163AG00164AG00165AG00166

G50Stock Code

AG00167AG00168AG00169AG00170AG00171AG00172AG00173AG00174

G60Stock Code

AG00175AG00176AG00177AG00178AG00179AG00180AG00181AG00182

G80Stock Code

AG00183AG00184AG00185AG00186AG00187AG00188AG00189AG00190

G120Stock Code

AG00191AG00192AG00193AG00194AG00195AG00196AG00197AG00198

Size Type Max Speed

41/2

• Rapid stock removal with finer finish in one operation.• Easier to control – less tiring to use.• No backing pad required.• Lower noise level.• Reduced clogging and glazing.• All sizes can be used on top speed machines.

Zirconium TypeUNICUT Bevel FlexidiscStock Code

AG12574AG12575AG12576AG12577AG12578AG12579AG12580AG12581AG12582AG12583

Size

115 mm115 mm115 mm115 mm115 mm180 mm180 mm180 mm180 mm180 mm

Type

#36#40#60#80

#120#36#40#60#80

#120

Aluminium TypeStock Code

AG12584AG12585AG12586AG12587AG12588AG12589AG12590AG12591AG12592AG12593

Size

115 mm115 mm115 mm115 mm115 mm180 mm180 mm180 mm180 mm180 mm