Air Tool Swivel Connectors Series 63 - Welcome To … · VARIACOR AIRMAX 155 Series 63 Any semi-rigid gas pump hose can be made GAS PUMP flexible and easy-to-handle with DynaVariacor®

Air Tool Swivel Connectors

AIRMAX 151

Series 63

- For use with most air tools such as spray guns,grinders, staple guns, buffers, glue guns,sanders and drills

- Ergonomic, swivels 360° which allows airhose to drop straight to the floor, no matterhow the tool is held

- Universal-joint that connects portable air toolsto an air line

- Improves tool manoeuvrability, minimizesoperator’s fatigue and extends hose life

Maximum Working Pressure150 PSI

STANDARD SWIVELCONNECTOR

Thread Air FlowPart NPT recommandedNo. in. SCFM63.1104 1/4 up to 25

SWIVEL CONNECTOR WITHFLOW CONTROL

Thread Air FlowPart NPT recommandedNo. in. SCFM63.1114 1/4 up to 25

ANGLE VARIABLECONNECTOR

Thread ThreadPart NPT NPTNo. in. in.63.0312 1/4 1/4

WARNINGNot to be used on percussion tools or in areas of high mechanical abuse

THE PROBLEM THE SOLUTION

ERGONOMIC

Montage catalogue anglais 2013_Layout 1 2014-02-27 13:14 Page151

PNEUMATIC

HIGH PRESSURE

FREELY ADJUSTABLECOUPLING FOR FIRE HOSE.

GAS PUMP

VARIACOR products

152 AIRMAX

Series 63


VARIACOR

AIRMAX 153

Series 63

Male – Female connectors

Recommended use : Connections for

apllications using air, fluids

CB

D

A

Impactwrench

Paint spraygun

Grinder Drill Sander Powerchisel

Nominal pressure : 10 bar. Operating temperature : -10, + 70°C.

Internal Passage Ø7 mm

Internal Passage 011 mm

Internal Passage 016 mm

Reference 63.0504 63.0506 63.0508 63.0509 6.0510

A 024 029.5 046

B 67 82 98

C INTERNAL THREAD 1/4’’ NPT

INTERNAL THREAD 3/8’’ NPT



INTERNAL THREAD 1’’ NPT

D Thread 1/4’’ NPT

Thread 3/8’’ NPT



Thread 1’’ NPT

Weight 79G 126G 132G 374G 358G Flow

recommanded 25 cfm 65 cfm 120cfm

The system Variacor®, internationallypatented, makes all pneumatic hose flexibleand multidirectional

Cost saving : no more premature wear of thesupply hose.

Easy-to-use : less strain due to the rigidity ofthe hose; makes work easier in hard to accessareas.

Comfort : no rolling up of the pipe, which can now be ideally positioned.

Ergonomics of the workstation, no moretendinitis !

PNEUMATIC

360˚ freerotation

90˚ freerotation


VARIACOR

154 AIRMAX

Series 63

HIGH PRESSURE

The internationally patented Variacor® system makes any high pressure hose flexible and freely adjustable over 360°.

Easiness : less effort generated by a rigid hose.

Comfort : no twisting, the hose remains in the ideal working position.

Flow : passage of fluid remains constant, no reduction in diameter from inlet to outlet.

Savings : no more supply hose early wear.

In standard type, Stainless steel, three designs and several models:

“3-rotation” freely adjustable joints

REFERENCE 63.0844 63.0846 63.0914 63.0864 63.0866 63.0916

inside Ø4, working presssure 630 bar, max. temperature 150°C

inside Ø6, working presssure 250 bar, max. temperature 200°C

A Ø24 B 88 88

C Female NPT 1/4’’ Female NPT 3/8’’ Female NPT 1/4’’ Female NPT 1/4’’ Female NPT 3/8’’ Female NPT 3/8’’

D

Male NPT 1/4’’ Male NPT 3/8’’



Weight 240G 230G 225G 215G

“Standard” freerotation joints

REFERENCE 63.0904 63.0906

Inside Ø6, working presssure 250 bar, max. temperature 200°C

A Ø24

B 72 C Female NPT 1/4’’ Female NPT 3/8’’ D Male NPT 1/4’’ Male NPT 3/8’’

Weight 185G

“Straight”rotating joints

REFERENCE 63.0644 63.0646 63.0664 63.0666 inside Ø4, working pressure

630 bar,max. temperature 150°C Inside Ø6, working presssure

250 bar,max. temperature 200°C

A Ø24 B 35

C Female NPT 1/4’’

Female NPT 3/8’’



D Male NPT 1/4’’

Male NPT 3/8’’

Male NPT 1/4’’

Male NPT 3/8’’

Weight 98G 90G

C

B

B C

R1 R2

R1 R2

R3

D

D

A

A

DC B

R

A

360˚ freerotation

360˚ freerotation


VARIACOR

AIRMAX 155

Series 63

GAS PUMPAny semi-rigid gas pump hose can be made flexible and easy-to-handle with DynaVariacor® - the patented multi-directional connector.

Reduces efforts, increases nozzle manoeuvrability.

Prevents unwanted twisting of the hose.

Easy filling whatever the position of the gas tank cover or type of vehicle.

Easy nozzle removal from the vehicle.

Improves uniform wear of the hose thanks to less twisting.

Best flow whatever position the connector is in.

One cross section, four references:

360o freerotation

90o freerotation

Reference 63.1090 63.1080

A 46

B 98 98

C 1’’ Thread

D 1’’ Thread 3/4’’ Thread

3/4’’ Thread

Weight 358G 374G

Nominal pressure 12 bars. Operating temperature: -20, + 70°C.

Internal passage Ø16 mm

Male – Femaleconnectors


FREELY ADJUSTABLE COUPLING FOR FIRE HOSE.

The Variacor® system, internationally patented, makes all rigidhosing flexible and multi-directional, whatever may be the pressure.

Increases maneuverability of fire hose, less effort due to hoserigidity. Makes easier using fire hose in hard to access area.Reduces step backwards when handling fire hose.

A

EE

BDC

Reference Description

Weight Overall dimension

A B C D E

63.1097 Freely

adjustable coupling, internal Ø

40mm, aluminium

made.

-10°C /

+ 80°C

810G

20 bar

166

066

Female 1 ½’’

Male 1 ½’’ Flat 54

63.1099 850G 168 Female 2’’

Male 2’’ Flat 66&62

Operatingtemperature

Nominalpressure

Free rotation by 360°

Free rotationfrom 90° to 180°

Dimensions are given in mm, for information and are subject to change.

VARIACOR

156 AIRMAX

Series 63


Rota VARIACOR

AIRMAX 157

Series 63

Multi-Use Rotary Seals: optimisation application / costs!

The RotaVariacor® range of connections allows you to optimise the cost of the « rotary seal » function for your standard applications. Particularly for those that don't have a lot of technical constraints.

You don't need an expensive 300 bar, 10 000 rpm rotary seal if you only need to pass a fluid through it at 6 bars, with slow rotation.

It is here that RotaVariacor® connections can provide a solution, using products that are reliable, efficient, compact, sturdy and at an optimised cost.

RotaVariacor® rotary seals are available in a standard product range for a number of applications such as air, water, hydrocarbons, foods, vacuums etc. Many diameters and connections, for example (not limited):

Male/female

Part number

mark 63.0404 63.0404 63.0404 63.0404 63.0404 63.0404 63.0404 63.0404 63.0404 63.0404

A 34 39 62 55 50 48 44 48 68 67

B Ø24 Ø29.5 Ø46 Ø56 Ø64 Ø66 Ø24 Ø29.5 Ø56 Ø69

C 5 6 10 9 33 29 15 15 23 22

D NPT 1/4ʼʼ NPT 1/2ʼʼ NPT 3/4ʼʼ NPT 1ʼʼ NPT 1ʼʼ1/4 NPT 1ʼʼ1/2 NPT 1/4ʼʼ NPT3/8ʼʼ NPT 1ʼʼ NPT 2ʼʼ

E Passage Ø7

Passage Ø11

Passage Ø16

Passage Ø25

Passage Ø30 Passage Ø40 Passage Ø7

Passage Ø11

Passage Ø25

Passage Ø40

F Flat 21 Flat 27 Flat 36 Flat 49 Flat 50 Flat 54 Flat 21 Flat 27 Flat 49 Flat 66

Maximum speed

30 rpm 30 rpm 40 rpm 30 rpm 20 rpm 15 rpm 30 rpm 30 rpm 30 rpm 15 rpm

Nominal pressure 16 bar 16 bar 25 bar 25 bar 20 bar 30 bar 16 bar 16 bar 25 bar 30 bar

Weight 38g 62g 135g 286g 314g 260g 41g 67g 310g 264g

female/female

Dimensions are shown in mm, for information purposes only and may be subject to modifications.

We also study and make rotary seals specifically for your applications.


Assemble your spraying system in one go!

Our products adapt to your requirements, for example:

The internationally patented Variacor® system enables you to assemble spraying systems quickly and easily as well as adjusting nozzle positions efficiently.

Economy: You don't waste time calling a piping specialist or boiler-maker.

Ease to use: Modular system, no need to weld or glue, as easy as a child's construction model.

Efficiency: Simple and instantaneous adjustment of nozzle positions. Several accessories and connec-tions available.

Longevity: Sturdy components, rigid system even on large surface areas, standard service pressure 50 bars.

Double telescopic spray Specific manifold

Angular adjustable ramp

Height adjustable blowing tunnel

A B

D

E

F

J

K

G

360°

360°

90° to 180°

Adjustable nozzle assembly

Spra VARIACOR

158 AIRMAX

Series 63


Spra VARIACOR

AIRMAX 159

Series 63

Try it and you won't be able to do without it!

Kits: Accessories description and quantity

KIT Part number

interior Ø

Connection Standard material

A-Ball Joint

B-Tube Txxlength

J-T bypass

D-Telescope RTTxxlength

E-Male Union

F-Female Union

K-Male Interface

tube

G-Fem. Interface

tube

63.2904 4 mm BSP 1/8ʼʼ R6 (2)

T6220AL (3)

RT6 (2) - U6MG18

(1) U6FG18

(2) IT6MG18

(1) IT6FG18

(2)

63.2908 8 mm BSP 1/4ʼʼ R10 (2)

T10320AL (3)

RT10 (2)

RTT10150 (1)

U10MG14(1)

U10FG14(2)

IT10MG14(1)

IT10FG14 (2)

63.2915 15 mm BSP 1/2ʼʼ

Alu.

R15 (2)

T15430AL (3)

RT15 (2)

RTT15200 (1)

U15MG12(1)

U15FG12(2)

IT15MG12(1)

IT15FG12 (2)

Kits are shown for information purposes and may be subject to modification.

Using the telescopic extension (D)Cutting tubes (B)

Using the Ball joints (A)

3 2 1

Unscrew the central nut (opposite way to « LOCK »).

Place the connector at the required angle (from 90° to 180°).

Lock the angle chosen by screwing the central nut (« LOCK » way).

2 1

Cut the tube to the required length using a metal saw or tube cutter. Burr the end.

Unscrew the nut at the end and insert the tube.

Adjust to the required length and lock by screwing the nut.

Rapid modular coupling principle

3 2 1

Unscrew the nut at the end of the part (opposite way to « LOCK »).

Insert the tube or the accessory in the part.

Lock the assembly by screwing the nut (« LOCK » way).


Hydro VARIACOR

160 AIRMAX

Series 63

90° to

180°

ext. Ø of tube (mm)

passage Ø (mm)

Dimension on flat CP1


Threading D

Threading D

Angular variation A

L1 L2 L3

6 4 19 12 M12x1.5 90° to 180° 49 24.5 10

8 6 22 14 M14x1.5 90° to 180° 55 27.5 11

10 8 26 16 M16x1.5 90° to 180° 56 28 12.5

12 10 30 18 M18x1.5 90° to 180° 62 31 14.5

15 12 36 22 M22x1.5 90° to 180° 65 32.5 16.5

HydroVariacorwith rings

HydroVariacorwith rings

Female GasHydroVariacor

Female GasHydroVariacor

passage Ø (mm)



Angular variation A L1 L2 L3

G 1/4" 7 26 19 90° to 180° 56 28 12.5

Dimensions are given in mm, for information purposes only, and may be modified.

PRESSION and REFERENCE

Series: LMaterial: "Steel +Bichromated Zinc"

exterior Ø of tube (mm)

Nominal Pression

(bars) Reference

6 250

8 250

10 250

12 250

15 250

Gas threading

Nominal Pression

(bars) Reference

1/4" 250

63.3012

63.3014

63.3016

63.3018

63.3022

63.3034


Dyna VARIACOR

AIRMAX 161

Series 63

CB

D

A

The internationally patented Variacor® system ensures that the wash gun feed pipe remains flexible and directional.

Economy: : no more premature wear of the flexible feed pipe.

Ease of use: Less stress caused by the rigidity of the flexible pipe makes washing easier in places with difficult access.

Comfort: No spiralling of the flexible pipe that is already in the ideal position.

Long life: Mechanical stainless steel components and aluminium body suitable for food processing.

360˚ freerotation

90˚ freerotation

63.0518Transit: Ø11mmWeight: 123g. / 0.272lbsMax. temperature: 90°C / 194°F Max. pressure: 40 bar Dimensions: (A) Ø 29.5 / (B) 82Male (D) NPT1/2Female (C) NPT1/2 The dimensions are given in mm as a guide and are subject to change.

Freely directional "swivel" connection for wash gun


Air Line Filters

162 AIRMAX

Series 63

WARNINGThis air line desiccant filter can bedamaged if used with solvents orchemical based oil. Requires no toolsto install.

Inlet OutletPart (F) NPT (M) NPTNo. in. in.63.3110 1/4 1/463.3120 3/8 3/8

Inlet OutletPart (F) NPT (M) NPTNo. in. in.63.3150 1/4 1/4

MINI DISPOSABLE AIR LINE DESICCANT FILTER / DRYER

BRONZE IN-LINE FILTER

- Ideal for tool and equipement rental- Eliminates impurities in compressed air

systems which in time will cause improperoperation or in some case will damagepneumatic tools, valves and air cylinders

- Perfect for precision regulators and aircontrols

- Lightweight and compact- In-line installation- Large porous bronze element to remove

foreign particles from contaminated airsupplies and to assure a clean air supply

Filter Capacity40 microns

ConstructionBody : Anodized aluminum, zinc plated steelFilter element: Porous bronze element

- Removes all traces of dust, water, oil and dirtat the point of use

- Ideal for spray guns and any otherapplications requiring a clean supply of air

- See-through housing shows color changewhen dryer needs replacement

- Lightweight and compact- Disposable and economical

Maximum Working Pressure125 PSIWorking Temperature32°F to 130°F (0°C to 54°C )

Maximum Flow Capacity15 SCFM


In-Line Air Regulators

AIRMAX 163

Series 63

MINI BRASS FLOW REGULATOR

PartNo. Inlet Outlet

63.3210 1/4 (F) NPT 1/4 (M) NPT

MINI ALUMINIUM FLOW REGULATOR


63.3225 3/8 (F) NPT 3/8 (M) NPT

MINI ALUMINIUM PRESSURE REGULATOR WITH GAUGE


63.3230 1/4 (F) NPT 1/4 (M) NPT

MINI NYLON PRESSURE REGULATOR WITH GAUGE


63.3240 1/4 (F) NPT 1/4 (M) NPTReplacement gauge : 62.1150

PRECISION FLOW REGULATOR WITH GAUGE


63.3250 1/4 (F) NPT 1/4 (F) NPT - Needle flow adjustment mechanism- To be fitted at the air gun’s air inlet- Made of solid aluminum- Glass pressure gauge- Pressure gauge : 0-100 PSI range

- Spring-loaded ratchet flow adjustment - Made of solid brass- Permits flow control in either direction

- Spring-loaded ratchet flow adjustment- Solid, light and compact - Permits positive flow adjustment without drift- Permits flow control in either direction

- O’ring rotative flow adjustment mechanism- Pressure gauge with 0-160 PSI range- Tamper proof adjustment setting is locked by

screw underneath- Weighs less than 3 ounces

- Diaphragm flow adjustment mechanism forprecise air pressure control

- Glass filled nylon body for corrosionresistance and leak free performance

- Stainless steel internal parts- Glass pressure gauge with 0-160 PSI range- 1/8 (F) NPT inlet gauge

PartNo. Description

63.3245 Bracket mini nylon regulator


In-Line Portable Lubricators

164 AIRMAX

Series 63

Inlet Outlet OilPart (F) NPT (M) NPT Air Flow CapacityNo. in. in. SCFM ml63.3310 1/4 1/4 15 563.3320 1/4 1/4 20 963.3330 3/8 3/8 30 963.3340 1/4 1/4 20 2263.3350 3/8 3/8 40 2263.3360 1/2 1/2 65 22

Inlet Outlet OilPart (F) NPT (M) NPT Air Flow CapacityNo. in. in. SCFM ml63.3305 (transparent)1/4 1/4 15 5

- Automatic lubrication of tools by a measuredamount of oil mist each time the tool is used

- Provide instant oil flow to time cycled air toolssuch as staplers and nailers

- Connects directly to the air tool

- Increases efficiency and life time of toolworking mechanism by adequate lubrication

- Saves money by reducing maintenance andrepair time

- Avoids the costs of wall mounted lubricatingsystems

- Operates in any position. Will not leaklubricant into air line


High Capacity In-Line Lubricators

Air Inlet OilPart (F) NPT CapacityNo. In. oz63.3560 1/2 2.663.3570 3/4 5.363.3575 3/4 863.3580 1 16

63.3305(transparent)


• Insulates 8,000 Volts(per layer)

• Heat resistant upto 260˚ Celsius

• Remains flexibletill -65˚ Celsius

• Never gets gummyor sticky

• Self-fusing

• Pressure resistant upto 8 Bar (with hosediameter 25mm)

Remains flexible

Can be appliedunder water

UV-resistant

Stretchable upto 300%

Waterproof - Airtight

Permanent seal

Resists fuels, oil,acids, solventsand salt

•

•

•

•

•

•

•

UNIVERSAL REPAIR TAPE

Begin by peeling liner away from SPITA ResQ-tape.

To complete wrapping of object, wrap SPITA ResQ-tape completely over

previous layer and press firmly.

While holding SPITA ResQ-tape inplace, begin STRETCHING at 2 to

3 times it’s length and wrap object with 50% overlap to ensure a proper seal.

Press SPITA ResQ-tape firmly onobject being wrapped, hold in place

and begin first wrap completelyover itself.

Boats Cars Trucks Caravans Campers Aviation Agricultural Plumbing Military Industry Rescue Water Electrical Services Sports

FAST AND EASY TO USE:

-65

260

4 8

Part No. Part No.Widht 1” Widht 2” Color

63.4900 63.4920 Clear63.4901 63.4921 Black63.4902 63.4922 Yellow63.4903 63.4923 Blue63.4904 63.4924 Red63.4905 63.4925 Green63.4906 63.4926 Grey63.4907 63.4927 White63.4908 63.4928 Orange

Self-fusing silicone tape

AIRMAX 165

Series 63


Hose Whips

166 AIRMAX

Series 63

- Protects pneumatic tools against shocks andvibrations

- Used between the air tool and the quickcoupler as a “Shock Absorber”

- Ergonomic and light

- Reduces the stress of the operator

- Easy tool manipulation

- Keeps its flexibility at low temperature

- Excellent resistance to oil and abrasive

- Reusable swivel fitting at one end


Working Temperature-40°C to 71°C (-40°F to 160°F)

ConstructionCover : Oil Resistant NeopreneTube : NBR Reinforcement : Braided Synthetic Fibers

ColorBlack

HOSE 1/4" I.D.Part Length ThreadNo. ft. (M) NPT

63.5412 12" 1/4 63.5418 18" 1/463.5424 24" 1/463.5436 36" 1/463.5460 60" 1/4

HOSE 3/8" I.D.Part Length ThreadNo. ft. (M) NPT

63.5612 12" 1/463.5618 18" 1/463.5624 24" 1/463.5636 36" 1/463.5660 60" 1/4

Increases quick couplers life cycle

“PUSH-ON” FITTING AT ONE END BARB CONNECTOR AT THE OTHER

END

ERGONOMIC

For any questionsor information about

compressed airyou may contact us at

Tel. : 1-888-730-0501Fax : 1-888-730-3522

or visit our web site atwww.airmax.ca


Oil For Pneumatic Tools And Equipments

AIRMAX 167

Series 63

Description Part No.

500 ml Container 63.60051 litre Container 63.60104 litres Container 63.6040205 litres Container 63.6045

ANTIFREEZE ADDITIVE FOR AIR TOOL LUBRICANT


250 ml Container 63.6125

- Allows use of pneumatic tools requiringlubrication at temperature as low as -65°C (-54°F)

- Does not damage hose and plastic tube

- Use 1 bottle of 250ml for 4 liter of oil

Keeps its viscosity at a very low temperature

LubricationReduction of wear and maintenance costs starts with adequatelubrication. The choice of a superiour quality lubricant oil is of theupmost importance in preventive maintenance.

AirMax’s oil meets the most severe requirements for pneumatic airtools and equipments. AirMax a trade mark of confidence !

PROTECTS AND EXTENDS LIFE OF AIR TOOLS, CYLINDERSAND VALVES

- Ideal for pneumatic tools and equipmentsrequiring lubrication

- Specially formulated for moving parts ofimpact tools, rotating and hammering tools,grinders, nailing and stapling or any otherpneumatic tools

- Extends air tool life

- Reduces wear and maintenance costs

- Increases tool performances

- Contains special additives that clean toolsmechanism, prevent corrosion and dissolvegums

Working Temperature-11°C to 60°C (12°F to 140°F)

Mineral Oil

ViscosityCSI @ 100°C : 4.8CSI @ 40°C : 50

-65°C

-11°C


NEW AND

REVOLUTIONARY

AIRMAX MARVEL Oil for Pneumatic Tools

168 AIRMAX

Series 63


250 ml Container 63.6202500 ml Container 63.62051 litre Container 63.62104 litre Container 63.6240

PROTECTS, CLEANS AND EXTENDS LIFE OF AIR TOOLS,CYLINDERS AND VALVES- Ideal for pneumatic tools and equipments

requiring lubrication

- Extends air tool life

- Reduces wear and maintenance costs

- Increases tool performances

- Contains special additives that clean toolsmechanism, prevent corrosion and dissolvegums

-40°C

- Keeps its viscosity at a very low temperature- First quality oil allowing a superior lubrication for all

pneumatic equipments - Cleaning power- Penetrating power- Wear resistance, allowing a better protection of pneumatic

tools- Friction resistance- Extreme pressure

Special Features

Keeps its viscosity at a very low temperature

LubricationReduction of wear and maintenance costs starts with adequatelubrication. The choice of a superiour quality lubricant oil is ofthe upmost importance in preventive maintenance.

Airmax’s oil meets the most severe requirements for pneumaticair tools and equipments. Airmax a trade mark of confidence.


Documents

Air Tool Swivel Connectors Series 63 - Welcome To … · VARIACOR AIRMAX 155 Series 63 Any semi-rigid gas pump hose can be made GAS PUMP flexible and easy-to-handle with DynaVariacor®