Prepay Loggins Prepay Portal www.unionbillnet.com/prepayportal
Login using your current portal username and password BCGI
https://mspapi.bcgi.net/mspui/login.do
https://mspapi.bcgi.net/mspui/login.do Login using provided
username and password
Slide 3
Adding a new customer always start in Prepay portal Select
Slide 4
Select plan Sim card # Choose area/reserve number Total to
collect
Slide 5
Select payment method With CC enter info Then Submit Confirm
total is correct
Slide 6
On prepay status page select BCGI load info Copy info into
required fields in BCGI Notice sim card serial number has been
converted to IMSI which is required for BCGI
Slide 7
Select Add New Customer in BCGI Complete all fields with a red
* Enter
Slide 8
Paste info from portal status page Note IMSI is a different #
from the serial # Entered from the sim card Enter
Slide 9
Select Services and Charges Tab Select Change Service Plan
Choose Plan Select next and Then Save
Slide 10
Replenishments
Slide 11
Select
Slide 12
Enter prepay number Put in replenishment amount Choose payment
method Submit
Slide 13
Enter Prepay Number
Slide 14
Select Account Details Tab Always Select Cash Enter Amount Add
Comments Submit Next Select Replenish
Slide 15
Agent Portal Phone OTA Change APN on all prepaid phones
Slide 16
Remove current phone settings Before adding new settings delete
the current WAP or MMS settings from the phone. This is phone
specific Example: Sony S3600 Menu > Settings > Application
settings > Browser > Browser Profiles > UnionWap >
Options > Remove (delete)
Slide 17
To download MMS and Wap settings select Customer Service then
OTA a Phone Select Next Select
Slide 18
Add phone Information Enter phone number Use drop down menus to
select Manufacturer and model When complete Select Button
Slide 19
Accept Settings in phone The phone will need to have the
settings updated. The phone will receive two configuration
messages. View Message > Options > Install > Union Wap
> Wap > Yes View Message > Options > Install > Union
MMS > Union MMS > Yes > Yes
Slide 20
Smart Phones This process will NOT work for Smart phones Manual
provisioning is required
