SPECIALTYFLOODLIGHTING

ACP Series LED | ACP1 & ACP2 | LED Floodlighting

SPECIALTYFLOODLIGHTING

The ACP LED is a sustainable solution for fl oodlighting applications with two models to choose from; the ACP1

(medium) and the ACP2 (large). The ACP1 offers lumen packages for direct replacement for 100-400 watt fl oods.

The ACP 2 offers lumen packages for direct replacement for 400-1000 watt fl oods.

The ACP Series LED – ACP1LED & ACP2LED

• Optimized thermal management system for maximum performance,

long life, and reliability

• L70 LED and driver life greater than 100,000 hours

(20 years operation)

• Optional tool-less entry and prewired three stage terminal block

reduce installation time

• NEMA 3 pin locking style photocontrol receptacle comes standard

on all product

• Mounting options include tenon slipfi tter knuckle, galvanized steel

yoke or painted steel yoke

• Segmented high performance internal refl ectors are designed for

superior fi eld to beam ratios, uniformity, and spacing

• Standard correlated color temperatures (CCT) are 4000K and

5000K, 70CRI minimum

• Robust design with IP66 rating, 2G vibration rating, and a

super durable polyester paint fi nish with 2500 hour salt fog rating

Key Features• Parking Lots

• Building Facades

• Schools/Campuses

• Military Bases

• Industrial Parks

• Substations

• Recreation Centers

• Auto dealerships

Applications

Optical Performance

IP66 Rated Luminaire

State-of-the-Art Drivers(700mA, 1000mA)

Surge ProtectionANCI cat. C rated-10kV/5kA

Lineman FriendlyTerminal Block

Replacement HID wattageCWA type Modules Lumens LED Wattage LPW Savings

ACP2 – 1000 HPS 1100 9COB/10A 33,060 363 91 67%

ACP2 – 1000 MH 1070 8COB/10A 29,989 325 92 70%

ACP2 – 750 MH 820 7COB/10A 26,100 287 91 65%

ACP1 – 400 HPS 464 6COB/10A 22,797 240 95 48%

ACP1 – 400 MH 464 5COB/10A 19,176 202 95 56%

ACP1 – 250 HPS 295 3COB/10A 11,730 120 98 59%

ACP1 – 250 MH 298 3COB/07A 8,429 80 105 73%

ACP1 – 150 HPS 190 2COB/10A 7,760 82 95 57%

The ACP LED Series is a direct replacement for installed high intensity discharge (HID) fl oodlights. The chart below

gives general guidance on replacement of ACP1 and ACP2 to common HID fl oods.

Double-ArticulatingCaptive Hinge

Quick Disconnect for Drive Power Input

Removable Door

Quick Disconnect for Drive Power Input

With energy savings exceeding 50% and expected service life over 20 years, the ACP LED luminaire excels at meeting

the challenges associated with fl ood lighting. By combining the robust mechanical design features with the optical

expertise and permanence of glass, this luminaire is designed as a direct retrofi t for both yoke and knuckle

mount applications.

Mechanical Design

Pre-wired 3 stage Terminal Block

3-Pin Locking Style Receptacle(standard)

Optional Tool-less Stainless Steel Latches

ACPLED

Optional Tool-less EntryTrigger Latch (Stainless Steel)

Knuckle MountWiring Chamber

Tenon Mount Prewired to Knuckle Wiring Chamber

Robust Thermal Management System for Long Life

Standard Wraparound Yoke Mount

Durable Glass Lens

Standard Cord Grip on Yoke Mount

Die-Cast Low CopperAluminum Housing

Standard Confi gurationIncludes Stainless Door Closure Bolts

ORDERING INFORMATION Example: ACP1LED 207A 120 55 4K TM BK 05

ACP Series - ACP1LED & ACP2LED

10.6”25.1”

27.9”

18.5”

ACP2LED

Effective Projected Area (EPA) The EPA for the ACP1LED is 3.1 sq. ft.,Approx. Wt. = 40 lbs. (MVOLT) Knuckle, Approx. Wt. = 47 lbs., (MVOLT) Yoke

23.91”

14.02”

22.52” 10.6”

ACP1LED

Effective Projected Area (EPA) The EPA for the ACP1LED is 3.8 sq. ft.,Approx. Wt. = 54 lbs. (MVOLT) Knuckle, Approx. Wt. = 65 lbs., (MVOLT) Yoke

ACP1LED FloodACP2LED Flood

120 120V 347 347V 480 480V MVOLT Mulit-volt (120-277)

55 5 X 565 6 X 566 6 X 6

Controls (blank)7 3-Pin Photocontrol Receptacle (standard) P57 5-Pin Photocontrol Receptacle NR4 No Photocontrol Receptacle PCSS Solid State Lighting Photocontrol (120-277V) PCL14 Solid State Long Life Photocontrol (120-277V) PCL34 Solid State Long Life Photocontrol (347V) PCL44 Solid State Long Life Photocontrol (480V) SH4 Shorting Cap DE5,6 ROAM CONCIERGE Dimming Control VE5,6 ROAMVIEW Dimming Control DM4,5 0-10V Dimming Control (controls provided by others)

Options

Voltage Nema PatternPerformance Package Series

Accessories (Shipped Separately)ACP2LEDFV- __ 9,10 Full VisorACP2LEDUBV-__9,11 Upper/Bottom VisorACP2LEDVG 12 Vandal GuardACP2LEDWG 13 Wire Guard

Notes: 1. Available with ACP1LED only 2. Available with ACP2LED only 3. Requires cord length and cord type 4. Not available with DM, NR, PCL1, PCL3, PCL4, PCSS, SH, or VE 5. Not available with DE, VE options 6. Specifies a ROAM dimming enabled fixture with a dimming control module factory installed. NEMA photocontrol receptacle required. Additional hardware and services required ROAM deployment must be purchased separately 7. Not available with NR 8. Not available with TM mounting. Must be combined with a cord type. EX: 0463 9. Paint designator needed. 10. Not compatible with WG, VG, or UBV 11. Not compatible with WG, VG, or FV 12. Not compatible with WG, FV, or UBV 13. Not compatible with FV, UBV or VG

4K 4000K5K 5000K

Color Temperature (CCT)

TM Tenon Slipfitter - KnuckleYK3 Yoke PaintedYG3 Yoke Galvanized

BZ Bronze BK Black GY Gray WH White GI Graphite

04 4’05 5’06 6’08 8’10 10’12 12’15 15’

TL Tool Less EntryNL Nema Label

Mounting Paint Cord Length7 Cord Type7 Misc

20 20’25 25’30 30’63 16-343 14-323 12-3

207A1 2 Modules, 700mA Driver210A1 2 Modules, 1050mA Driver307A1 3 Modules, 700mA Driver310A1 3 Modules, 1050mA Driver407A1 4 Modules, 700mA Driver410A1 4 Modules, 1050mA Driver507A1 5 Modules, 700mA Driver510A1 5 Modules, 1050mA Driver607A1 6 Modules, 700mA Driver610A1 6 Modules, 1050mA Driver

707A2 7 Modules, 700mA Driver710A2 7 Modules, 1000mA Driver807A2 8 Modules, 700mA Driver810A2 8 Modules, 1000mA Driver907A2 9 Modules, 700mA Driver910A2 9 Modules, 1050mA Driver

Product OverviewOptical

Performance of the ACP1 is to replace 100-400 watt HID

product. Performance of the ACP2 is to replace 400-1000

watt HID product.

The optical system utilizes state-of-the-art chip-on-board

technology. The luminaire uses a highly specular internal

refl ector designed for superior fi eld to beam ratios,

uniformity and spacing.

NEMA beam pattern choices of 5X5, 6X5, and 6X6 are

available. Optional shielding is available to control uplight

and light trespass. The optical enclosure is glass.

Electrical

Long Life: LED light engines are rated > 100,000 hours

at 25°C, L70. Electronic driver has a rated life of 100,000

hour at a 25°C ambient.

Surge protection device provides IEEE/ANSIc62.41

Category C (10kV/5kA) level of protection.

Mechanical

Rugged die cast aluminum housing is painted with a

super durable polyester paint fi nish for durability and

corrosion resistance. Rigorous fi ve stage pre-treating

and paint process yields a fi nish that achieves a scribe

creepage rating of 9 after over 2,500 hours exposure

to salt fog chamber.

The luminaire is available in either knuckle mount or yoke

mount. The knuckle mount is adjustable and is designed

to fi t 2.375 inch to 2.875 inch tenons. The yoke mount is

available in either painted steel or galvanized steel.

The luminaire comes standard with a 3 stage terminal

block that comes prewired eliminating the lineman from

opening the unit during installation. The knuckle version

is pre-wired to the wiring chamber at the fi tter. The yoke

mount has provision for a pre-wired cord drop to

specifi ed length in the ordering information.

The luminaire comes standard with the door frame bolted

to the housing. Optional tool-less stainless steel latches

are available to allow easy access to LED drivers,

surge protection, and terminal block.

The optical enclosure is sealed and gasketed to

an IP66 rating.

Controls

The NEMA three pin photocontrol receptacle is standard

on all units. An optional fi ve pin receptacle is available.

Dimming version (available with DE and VE option) uses

proprietary Acuity Brands components to enable

continuous 0-10V dimming down to 10% output via

the ROAM smart controls system. (sold separately)

Photocontrol for solid-state lighting meets

ANSI C136.10 criteria.

Warranty & Standards

UL 1598 A wet location

Full warranty terms located at www.acuitybrands.com/

CustomerResources/Terms_and_conditions.aspx