1
4361 Firestone Blvd. South Gate, CA 90280 Toll Free: (888) 295-4531 | Fax: 323 336-8307 | Web: fhc-usa.com 4361 Firestone Blvd. South Gate, CA 90280 Toll Free: (888) 295-4531 | Fax: 323 336-8307 | Web: fhc-usa.com LIT0082 07.20 2-1/2" Square and Tapered Low Profile Door Rails For 3/8", 1/2" or 9/16" Tempered Glass FHC-ADVANCE SERIES FRAMELESS GLASS ENTRANCE SYSTEM FHC-ADVANCE SERIES FRAMELESS GLASS ENTRANCE SYSTEM For Technical Support Call Toll Free at (888) 295-4531 • FHC American Manufacturing • Patent Pending UNITIZING GASKET / Dual-Inclined Control Surfaces • Easiest and Fastest Rail to Install in the Industry • New Modern Crisp Corner Design • For 3/8" or 1/2" Monolithic Tempered and 9/16" Laminated Tempered Glass • Class 1 Anodizing UV Stable Finishes That Will Not Fade • Increased Glass Bite Improves Holding Strength and Aesthetics • Solid One Piece Aluminum Housing • State of the Art Solid Forged Brass Plated End Caps With Premium Finishes • New Innovative Anti-Clamshell Pad End Cap • Available With or Without Lock • Available In a Wide Range of Architectural Finishes 4" Square and Tapered Door Rails For 3/8, 1/2" or 9/16" Tempered Glass PRODUCT INFO/SPECIFICATIONS: - CSI Format Specifications are Available for Download - End Caps are Included with Every Door Rail - Door Rails With Locks are Supplied Prepped and Installed, Keyed Cylinders, and Thumbturns are Sold Separately - FHC Follows GANA Guidelines for Maximum Door Height and Widths. Reference the FHC Herc-Door Sizing Guidelines. Visit fhc-usa.com to see our full line of Architectural Hardware 10" Square Door Rails For 3/8", 1/2" or 9/16" Tempered Glass FRAMELESS HARDWARE CO. ADVANCE RAIL 4" Patent Pending Unitizing Clamping Gasket Solid One Piece Rail Housing PAS Pivot Alignment System With Hardware Mounting Block Allows 3/8" Adjustments Optional Weatherstripping Seal Sold Separately Item No. RWS36 For 3/8" or 1/2" Monolithic Tempered and 9/16" Ionoplast Laminated Glass Cladding Included on Stainless Steel and Brass Finishes Innovative Concealed Actuation Hardware Allows for Uninterrupted Hardware Mounting Patent Pending Dual-Inclined Bearing Surface Controls Angularity and Self Centering of the Rail 2" 1/4" Clearance Standard 3-1/8" Glass Deduct Each FHC Door Rail is Factory Designed to Allow for Vertical Adjustment of Plus 1/8" or Minus 1/16" With our Included Door Rail Setting Blocks. 2-1/2" Patent Pending Unitizing Clamping Gasket Solid One Piece Rail Housing Optional Weatherstripping Seal Sold Separately Item No. RWS36 Cladding Included on Stainless Steel and Brass Finishes Patent Pending Dual-Inclined Bearing Surface Controls Angularity and Self Centering of the Rail 2" 1/4" Clearance Standard 2-1/8" Glass Deduct For 3/8" or 1/2" Monolithic Tempered and 9/16" Ionoplast Laminated Tempered Glass Each FHC Door Rail is Factory Designed to Allow for Vertical Adjustment of Plus 1/16" or Minus 1/16" With our Included Door Rail Setting Blocks. FHC Low Profile Rails are Factory Prepped Directly to Door Rail Web 10" Patent Pending Unitizing Clamping Gasket Solid One Piece Rail Housing PAS Pivot Alignment System With Hardware Mounting Block Allows 3/8" Adjustments Optional Weatherstripping Seal Sold Separately Item No. RWS36 For 3/8" or 1/2" Monolithic Tempered and 9/16" Ionoplast Laminated Glass Cladding Included on Stainless Steel and Brass Finishes Socket Head Cap Screw Patent Pending Dual-Inclined Bearing Surface Controls Angularity and Self Centering of the Rail 2" 1/4" Clearance Standard 9-1/8" Glass Deduct Each FHC Door Rail is Factory Designed to Allow for Vertical Adjustment of Plus 1/8" or Minus 1/16" With our Included Door Rail Setting Blocks. • Low Profile Accepts Standard Size Mounting Hardware • New Improved Pivot Alignment System “PAS” Included With Each Rail • New Improved Pivot Alignment System “PAS” Included With Each Rail New Modern Crisp Corner Design New Modern Crisp Corner Design New Modern Crisp Corner Design 60 Degree A.D.A Compliant Tapered Top Edge 60 Degree A.D.A Compliant Tapered Top Edge New Innovative Built-In Anti-Clamshell Pad New Innovative Built-In Anti-Clamshell Pad Square Profile End View Shown Tapered Profile End View Shown 4" and 2-1/2" Low Profile 9-1/2" Corner Patch Rails For 3/8", 1/2" or 9/16" Tempered Glass New Innovative Built-In Anti-Clamshell Pad INTRODUCING R4T MODEL R4S MODEL R25T MODEL R25S MODEL R10S MODEL PR25S MODEL PR25T MODEL PR4T MODEL PR4S MODEL

ADVANCE RAIL · 4361 Firestone Blvd. South Gate, CA 90280 Toll Free: (888) 295-4531 | Fax: 323 336-8307 | Web: fhc-usa.com 4361 Firestone Blvd. South Gate, CA 90280 Toll Free: (888)

  • Upload
    others

  • View
    2

  • Download
    0

Embed Size (px)

Citation preview

Page 1: ADVANCE RAIL · 4361 Firestone Blvd. South Gate, CA 90280 Toll Free: (888) 295-4531 | Fax: 323 336-8307 | Web: fhc-usa.com 4361 Firestone Blvd. South Gate, CA 90280 Toll Free: (888)

4361 Firestone Blvd. South Gate, CA 90280 Toll Free: (888) 295-4531 | Fax: 323 336-8307 | Web: fhc-usa.com 4361 Firestone Blvd. South Gate, CA 90280 Toll Free: (888) 295-4531 | Fax: 323 336-8307 | Web: fhc-usa.com

LIT0

082

07.2

0

2-1/2" Square and Tapered Low Profile Door RailsFor 3/8", 1/2" or 9/16" Tempered Glass

FHC-ADVANCE SERIES FRAMELESS GLASS ENTRANCE SYSTEM FHC-ADVANCE SERIES FRAMELESS GLASS ENTRANCE SYSTEM

For Technical Support Call Toll Free at (888) 295-4531

• FHC American Manufacturing• Patent Pending UNITIZING GASKET /

Dual-Inclined Control Surfaces • Easiest and Fastest Rail to Install in the Industry• New Modern Crisp Corner Design• For 3/8" or 1/2" Monolithic Tempered and

9/16" Laminated Tempered Glass• Class 1 Anodizing UV Stable Finishes That Will Not Fade

• Increased Glass Bite Improves Holding Strength and Aesthetics

• Solid One Piece Aluminum Housing• State of the Art Solid Forged Brass Plated

End Caps With Premium Finishes• New Innovative Anti-Clamshell Pad End Cap• Available With or Without Lock• Available In a Wide Range of Architectural Finishes

4" Square and Tapered Door Rails For 3/8, 1/2" or 9/16" Tempered Glass

PRODUCT INFO/SPECIFICATIONS:

- CSI Format Specifications are Available for Download

- End Caps are Included with Every Door Rail- Door Rails With Locks are Supplied Prepped

and Installed, Keyed Cylinders, and Thumbturns are Sold Separately

- FHC Follows GANA Guidelines for Maximum Door Height and Widths. Reference the FHC Herc-Door Sizing Guidelines.

Visit fhc-usa.com to see our full line of Architectural Hardware

10" Square Door Rails For 3/8", 1/2" or 9/16" Tempered Glass

FRAMELESS HARDWARE CO.

ADVANCE RAIL

4"

Patent Pending Unitizing Clamping Gasket

Solid One Piece Rail Housing

PAS Pivot Alignment System With Hardware Mounting Block Allows

3/8" Adjustments

Optional Weatherstripping

Seal Sold SeparatelyItem No. RWS36

For 3/8" or 1/2" Monolithic Tempered

and 9/16" Ionoplast Laminated Glass

Cladding Included on Stainless Steel and Brass Finishes

Innovative Concealed Actuation Hardware Allows for Uninterrupted Hardware Mounting

Patent Pending Dual-Inclined Bearing Surface Controls Angularity and Self Centering of the Rail

2"

1/4" ClearanceStandard

3-1/8" Glass

Deduct

Each FHC Door Rail is Factory Designed to Allow for Vertical Adjustment of Plus 1/8" or Minus 1/16"

With our Included Door Rail Setting Blocks.

2-1/2"

Patent Pending Unitizing Clamping GasketSolid One Piece

Rail Housing

Optional Weatherstripping

Seal Sold SeparatelyItem No. RWS36

Cladding Included on Stainless Steel and Brass Finishes

Patent Pending Dual-Inclined Bearing Surface Controls Angularity and Self Centering of the Rail

2"

1/4" ClearanceStandard

2-1/8" Glass

Deduct

For 3/8" or 1/2" Monolithic

Tempered and 9/16" Ionoplast Laminated

Tempered Glass

Each FHC Door Rail is Factory Designed to Allow for Vertical Adjustment of Plus

1/16" or Minus 1/16" With our Included Door

Rail Setting Blocks.

FHC Low Profile Rails are Factory Prepped Directly to Door Rail Web

10"

Patent Pending Unitizing Clamping Gasket

Solid One Piece Rail Housing

PAS Pivot Alignment System With Hardware Mounting Block Allows

3/8" Adjustments

Optional Weatherstripping

Seal Sold SeparatelyItem No. RWS36

For 3/8" or 1/2" Monolithic Tempered

and 9/16" Ionoplast Laminated Glass

Cladding Included on Stainless Steel and Brass Finishes

Socket HeadCap Screw

Patent Pending Dual-Inclined Bearing Surface Controls Angularity and Self Centering of the Rail

2"1/4" ClearanceStandard

9-1/8" Glass

Deduct

Each FHC Door Rail is Factory Designed to Allow for Vertical Adjustment of Plus 1/8" or Minus 1/16"

With our Included Door Rail Setting Blocks.

• Low Profile Accepts Standard Size Mounting Hardware

• New Improved Pivot Alignment System “PAS” Included With Each Rail

• New Improved Pivot Alignment System “PAS” Included With Each Rail

New Modern Crisp Corner

Design

New Modern Crisp Corner

Design

New Modern Crisp Corner

Design

60 DegreeA.D.A CompliantTapered Top Edge

60 DegreeA.D.A CompliantTapered Top Edge

New Innovative Built-In Anti-Clamshell Pad

New Innovative Built-In Anti-Clamshell Pad

Square Profile End View Shown

Tapered Profile End View Shown

4" and 2-1/2" Low Profile 9-1/2" Corner Patch Rails For 3/8", 1/2" or 9/16" Tempered Glass

New Innovative Built-In Anti-Clamshell Pad

INTRODUCING

R4T MODEL

R4S MODEL

R25T MODEL

R25S MODEL

R10S MODEL

PR25S MODEL

PR25T MODEL

PR4T MODEL

PR4S MODEL