Hanger designed to facilitate axial movement of suspended piping caused by thermal expansion / contraction or mechanical shifting. Features solid steel roller for superior performance compared to conventional cast iron rolls. Product Application Usage of Roller Hangers is recommended for installations with long horizontal pipe runs involving changes in the temperature of the fluid medium or external environment. If pipes are gripped rigidly in such cases, forces arising from expansion / contraction can cause piping failure or structural damage. Typical examples include: HVAC piping in buildings with large ground areas, oil refineries, chemical plants Product Features WEICCO rollers are made from solid steel shaft, for higher load bearing capacity and smoother operation than the hollow cast iron rollers supplied by others. Yoke design permits vertical level adjustment of 30- 75mm (based on hanger size) after pipe installation. Supplied fully galvanised as standard. Material: Finish: Roller, Roller Pin, Frame - Steel Electrogalvanised post manufacture upto WRLH 600, primer painted for larger sizes Epoxy Powder Coated finish (suffix 'P') Hot Dip Galvanised finish (suffix 'HOG') Stainless Steel construction (suffix 'SS') Options: Selection For insulated pipe, please specify effective 00 or pipe size plus insulation thickness. Standard (as below) or intermediate models will be selected as appropriate. Compliance - US Standards MSS-SP58 (Type 43), r>. MSS-SP69; EG to ASTM 8633 SC3, 851706 FE/ZN12 Suspension Rod 'd' (by others) F~ o ~' c Installation Guidelines Provide oversize washers under both suspension nuts. Tighten the nuts to ensure proper hanger performance. Insulation Protection Shield (IPS) or Pipe Covering Protection Saddle (PCPS) should be used at location of roller hanger when suspending insulated pipe. - -- --- - ---------- ----- ----- - -------------- SELECTION TABLE FOR ADJUSTABLE ROLLER HANGERS 711 Model, Steel Pipe " "ii. Dimensions (mm) Max. 'Nominal g A ;!"8 C 0 E F d !'.~ load (Kg) WRLH 50 2" 115 68 40 60 30 4x30 10 140 WRLH 65 2)1," 131 84 49 68 30 4x30 12 140 WRLH 75 3" 152 97 56 80 35 4x30 12 140 WRLH 100 4" 180 123 70 92 35 6x38 12 240 WRLH 125 5" 220 150 86 110 40 8x50 16 350 WRLH 150 6" 250 178 100 123 40 8x 50 16 350 WRLH 200 8" 310 230 130 150 40 10x50 20 350 WRLH 250 10" 380 285 160 186 50 12x50 22 450 WRLH 300 12" 440 335 190 212 50 12x60 22 560 WRLH 350 14" 480 370 210 228 50 12x60 24 560 WRLH 400 16" 530 420 235 253 50 12x75 24 730 WRLH 450 18" 595 470 265 289 60 12x75 24 730 WRLH 500 20" 660 520 290 314 60 16x75 30 850 WRLH 600 24" 785 625 350 380 75 16 x 100 30 950 WRLH 750 30" 980 780 435 455 75 40 x 80 Chi 30 2300 WRLH 900 36" 1170 940 520 525 75 50 x 100 Chi 36 3500 Stockist: WRLH 1E0412 Product specifications are subject t~ change without prior notice ~I"'~ MOODY , INTERNATIONAL 00' ISO 9001 :2008

Adjustable Roller Hanger

Download PDF Report

Upload
syed-kamal-fareedee
View
264
Download
3

Tags:

Embed Size (px)

DESCRIPTION

Roller hanger adjustable from weicco

Citation preview

Product ApplicationUsage of Roller Hangers is recommended for installationswith long horizontal pipe runs involving changes in thetemperature of the fluid medium or external environment.If pipes are gripped rigidly in such cases, forces arisingfrom expansion / contraction can cause piping failure orstructural damage.Typical examples include: HVAC piping in buildings withlarge ground areas, oil refineries, chemical plants

Product FeaturesWEICCO rollers are made from solid steel shaft, forhigher load bearing capacity and smoother operationthan the hollow cast iron rollers supplied by others.Yoke design permits vertical level adjustment of 30-75mm (based on hanger size) after pipe installation.Supplied fully galvanised as standard.

Material:Finish:

Roller, Roller Pin, Frame - SteelElectrogalvanised post manufacture uptoWRLH 600, primer painted for larger sizesEpoxy Powder Coated finish (suffix 'P')Hot Dip Galvanised finish (suffix 'HOG')Stainless Steel construction (suffix 'SS')

Options:

SelectionFor insulated pipe, please specify effective 00 or pipesize plus insulation thickness. Standard (as below) orintermediate models will be selected as appropriate.

Compliance - US Standards MSS-SP58 (Type 43),r>. MSS-SP69; EG to ASTM 8633 SC3, 851706 FE/ZN12

Suspension Rod 'd'(by others)

F~o

~'c

Installation GuidelinesProvide oversize washers under both suspension nuts.Tighten the nuts to ensure proper hanger performance.

Insulation Protection Shield (IPS) or Pipe CoveringProtection Saddle (PCPS) should be used at locationof roller hanger when suspending insulated pipe.

- -- --- - ---------- ----- ----- - --------------SELECTION TABLE FOR ADJUSTABLE ROLLER HANGERS

711 Model, Steel Pipe " "ii. Dimensions (mm) Max.'Nominal g A ;!"8 C 0 E F d !'.~ load (Kg)

WRLH 50 2" 115 68 40 60 30 4 x 30 10 140WRLH 65 2)1," 131 84 49 68 30 4 x 30 12 140WRLH 75 3" 152 97 56 80 35 4 x 30 12 140WRLH 100 4" 180 123 70 92 35 6 x 38 12 240WRLH 125 5" 220 150 86 110 40 8 x 50 16 350WRLH 150 6" 250 178 100 123 40 8x 50 16 350WRLH 200 8" 310 230 130 150 40 10 x 50 20 350WRLH 250 10" 380 285 160 186 50 12 x 50 22 450WRLH 300 12" 440 335 190 212 50 12 x 60 22 560WRLH 350 14" 480 370 210 228 50 12 x 60 24 560WRLH 400 16" 530 420 235 253 50 12 x 75 24 730WRLH 450 18" 595 470 265 289 60 12 x 75 24 730WRLH 500 20" 660 520 290 314 60 16 x 75 30 850WRLH 600 24" 785 625 350 380 75 16 x 100 30 950WRLH 750 30" 980 780 435 455 75 40 x 80 Chi 30 2300WRLH 900 36" 1170 940 520 525 75 50 x 100 Chi 36 3500

Stockist: WRLH 1E0412

Product specifications are subject t~ change without prior notice

~I"'~MOODY ,INTERNATIONAL 00' ISO 9001 :2008