Upload
lephuc
View
254
Download
1
Embed Size (px)
Citation preview
Add-on Profile (AOP) Expansion
21
More Choices for Integrated EtherNet/IP Devices• Addition of Electronic Data Sheet AOPs makes integration of EtherNet/IP devices easier than
ever before• Use text-based Electronic Data Sheets• Add devices directly from RSLogix 5000 design environment• Provides configuration, connection information, I/O tags, and configuration screens, other
pre-defined tabs
Socket Connections
Scanners
Printers
Socket ConnectionRobots
Non-Windows Based Workstations
Any Standard Ethernet Devices
Connect Even More Devices to Integrated Architecture• Allows Logix connection to non-CIP
devices• Barcode scanners, vision systems,
printers, robots, competitive controllers, databases, and more
• Socket-specific messaging available in RSLogix 5000
• Supported in:– 1756-EWEB and 1768-EWEB– CompactLogix 5370 L1, L2, L3– 1756-EN2x and 1756-EN3TR
More Efficient Communications Extended to Safety I/O
Logix PACs communicate to other EtherNet/IP devices via Unicast• Offers more IT-friendly communication method• Standard I/O in V18• Standard produced/consumed tags in V18• Safety Produced/Consumed tags in V19• Safety I/O in V20Allow communications to span multiple VLANs or subnets• Example application includes interlocking of
remote controllers over plant infrastructure
23
New Profiles Added to RSLogix 5000 V20
24
Kinetix Integrated Drive Motor (Sercos Interface)
Kinetix 350 EtherNet/IP CIP
Motion
Flex I/OEIP w/DLR
Motor ProtectionEtherNet/IP Adaptor
w/ DLR
ArmorStartEIP w/DLR
SLC EtherNet/IP Adaptor
What changes in V21?
(Confidential – For Internal Use Only) C i h © 2010 R k ll A i
25
Extended data around tags & structures – “Meta Data”
High Speed Button Control
Logix & View Shared Tag Definitions
Controller Based High Speed Data Log
InstanceTag.MotorSpeed.@Max
InstanceTag.MotorSpeed.@EU
InstanceTag.MotorSpeed.@Min
Jog MotorJog Motor
A-B Controller Based High Speed Alarm Log
Copyright © 2011 Rockwell Automation, Inc. All rights reserved. 26
1. Programmable Automation Controllers Hardware
2. Programmable Automation Controllers Software
3. Input and Output Enhancements
(Confidential – For Internal Use Only) 27
• Controller Configures Input & Output Modules to define their behavior:– Input module configuration defines when the module “Produces” Output Command data
• For the –IB16IF: any Input Change of State• For the –LSC8XIB8I: any Input Change of State or any Output Window definitions
– Output module configuration defines which Input module to “Listen” to and what combination of parameters, from both the Controller and the Input module, the Output Pts will respond to
• Output module “Hears” parameters required to energize an Output
1756 I/O Enhancement ProjectPeer to Peer I/O Control Concept
When Input criteria is met, Outputs will respond in less than 50uS
Configuration
Configuration
Input Module produces data
“Gate” CmdsOptional Controller Output
(Confidential – For Internal Use Only) Copyright © 2009 Rockwell Automation, Inc. All rights reserved.28
1756 I/O EnhancementFast DC I/O (target late-summer 2012)
• 1756-IB16IF Fast 24vdc Input Module• <25 uS Symmetrical On /Off response time• 10 uS Pulse Capture capability• Per Point CIPSynch Timestamping • Sink / Source Capable (Isolated)• Event Tags / 2nd Connection support• Uses Peer to Peer I/O Connection to the –OB16IEF for Output control
• 1756-LSC8xIB8I 24vdc Low-Speed Counter• 8 – 40kHz Counters w/Rollover and Preset values in Output Tags• Returns Accum Count + Instantaneous and Average Frequency Values• 8 “Control” Inputs for Up/Dn, Reset and Gate functions• 2 Configurable Output Windows per Counter• Uses Peer to Peer I/O Connection to the –OB16IEF for Output control
• 1756-OB16IEF Fast 24vdc Output• <25 uS Symmetrical On /Off response time• 2A Capability @ 30deg C• Per point E-Fusing (Thermal)• Programmable Fault State Delays• Built-in Pulse Width Modulation • Master to both the –IB16IF Input and the –LSC8XIB8I Counter modules
• 1756-OB16IEFS Scheduled Output• Per Point Scheduling for all 16 outputs
• 32 Schedules• 2 Schedule / Output (On and Off)
• 2A Capability @ 30deg C• Per point E-Fusing (Thermal)• Programmable Fault State Delays• Built-in Pulse Width Modulation greatly simplifies Stitching applications
World class, highest performance IO platform available only from Rockwell AutomationPeer to Peer Control capabilities resulting in Screw to Screw performance <100uS
Peer Device Peer Device
Peer Device
Copyright © 2011 Rockwell Automation, Inc. All rights reserved. 29
1. Programmable Automation Controllers Hardware
2. Programmable Automation Controllers Software
3. Input and Output Enhancements
4. Human-Machine Interface Hardware