adaptations - Ergochair · adaptations TM adapt®200 adapt®500 adapt®600 adapt®700 adapt ® 7 00... The Heavy-duty Solution Ergochair Ltd t: 01454 329210 f: 01454 329266 e: [email protected]

Use

r W

eig

ht

kgB

ack

Hei

gh

tm

mS

eat

Dep

thm

mS

eat

Wid

thm

m

adapt 700adapt 600adapt 500adapt 200




kg?

mm?

Please selectSeat Depthof the user(back of buttockto back of knee)

Please selectSeat Widthof the user

Please selectBack Heightof the user

Please selectBody Weightof the user

mm?

mm?

190 185 180 175 170 165 160 155 150 145 140 135 130 125 120 115 110 105 100 95 90 85 80 75 70 65 60 55 50 45 40 35

740 730 720 710 700 690 680 670 660 650 640 630 620 610 600 590 580 570 560 550 540 530 520 510 500 490 480 470 460 450 440 430 420 410 400 390 380 370 360 350

660 650 640 630 620 610 600 590 580 570 560 550 540 530 520 510 500 490 480 470 460 450 440 430 420 410 400 390 380 370 360 350 340 330 320 310 300 290 280

620 610 600 590 580 570 560 550 540 530 520 510 500 490 480 470 460 450 440 430 420 410 400 390 380 370 360 350 340 330 320 310 300 290 280 270

The Range SelectorMove each slide to select the nearestvalue for each of the user’s measurements

A colour match in all four categories will indicate which adapt® range is best suited to the user

adapt®

easiSpec™

®

from

www.ergochair.co.uk

adapt®

easiSpec™

from

?Measure from seat surface to bony part of

shoulder. This is easier when seated on a hard, flat surface

1

mm?

Measure the user’s hip width across the widest

point whilst they are seated. Placing a ruler, piece of card or thin book vertically against the sides of the user, then measuring in between, will help

3

mm

mm

?

Measure from back of buttock to back of knee. You

may find It easier to place a piece of card or a thin book behind the user to assist with finding the correct start point

2

4 Go to the corresponding easiSpec™ guideHere’s a quick overview of the adapt® ranges:

adapt 200

adapt 500

adapt 600

adapt 700

Made-to-measure only, for petite users

Entry level ergonomics with good adaptability

Unlimited adaptability for the widest range of users

Heavy duty use, for larger users

If you would like to talk to someone about using this guide, we’re always on hand to help:

Just call us on 01454 329210 or email:[email protected]

®

www.ergochair.co.uk

adaptationsTM

adapt®200 adapt®600 adapt®700adapt®500

adap

t®

700 ... The

Heavy-dutySolution

Ergochair Ltd

t: 01454 329210f: 01454 329266e: [email protected]: www.ergochair.co.uk

your local ergochair distributor is...

made tomeasure

adapt® 700

LaunchBrochure

using the system to create your perfect adapt® chair prescription

®

200

500

600

700

Use the adapt easiSpec Seating Evaluation and Measurement Form to jot down some key body measurements

and specifying one is as easy as 1,2,3 with our system

The relevant easiSpec assesment guide will then allow you to create the complete chair prescription

Once that’s done we’ll help you get in touch with the right person to place your order

It’s that simple...

and the result is a unique, adapt chair personally specified by you, and made-to-measure to your exact individual requirements

because you are unique... ... so is each and every one of our adapt® chairs

Use

r W

eig

ht

kgB

ack

Hei

gh

tm

mS

eat

Dep

thm

mS

eat

Wid

thm

m





kg?

mm?





mm?

mm?

190 185 180 175 170 165 160 155 150 145 140 135 130 125 120 115 110 105 100 95 90 85 80 75 70 65 60 55 50 45 40 35

740 730 720 710 700 690 680 670 660 650 640 630 620 610 600 590 580 570 560 550 540 530 520 510 500 490 480 470 460 450 440 430 420 410 400 390 380 370 360 350

660 650 640 630 620 610 600 590 580 570 560 550 540 530 520 510 500 490 480 470 460 450 440 430 420 410 400 390 380 370 360 350 340 330 320 310 300 290 280

620 610 600 590 580 570 560 550 540 530 520 510 500 490 480 470 460 450 440 430 420 410 400 390 380 370 360 350 340 330 320 310 300 290 280 270

The Range SelectorMove each slide to select the nearest

value for each of the user’s measurements

A colour match in all four categories will indicate

which adapt® range is best suited to the user

adapt®

easiSpec™

®

from

www.ergochair.co.uk

adapt®

easiSpec™

from



1

mm?


point whilst they are seated. Placing a ruler, piece of card or thin book

vertically against the sides

of the user, then measuring

in between, will help

3

mm

mm

?


may find It easier to place

a piece of card or a thin book behind the user to assist with finding the correct start point

2

4 Go to the corresponding easiSpec™ guide

Here’s a quick overview of the adapt® ranges:

adapt 200

adapt 500

adapt 600

adapt 700





If you would like to talk to someone about using

this guide, we’re always on hand to help:

Just call us on 01454 329210 or

email:[email protected]

®

www.ergochair.co.uk

Use

r W

eig

ht

kgB

ack

Hei

gh

tm

mS

eat

Dep

thm

mS

eat

Wid

thm

m





kg?

mm?





mm?

mm?

190 185 180 175 170 165 160 155 150 145 140 135 130 125 120 115 110 105 100 95 90 85 80 75 70 65 60 55 50 45 40 35

740 730 720 710 700 690 680 670 660 650 640 630 620 610 600 590 580 570 560 550 540 530 520 510 500 490 480 470 460 450 440 430 420 410 400 390 380 370 360 350

660 650 640 630 620 610 600 590 580 570 560 550 540 530 520 510 500 490 480 470 460 450 440 430 420 410 400 390 380 370 360 350 340 330 320 310 300 290 280

620 610 600 590 580 570 560 550 540 530 520 510 500 490 480 470 460 450 440 430 420 410 400 390 380 370 360 350 340 330 320 310 300 290 280 270





adapt®

easiSpec™

®

from

www.ergochair.co.uk

adapt®

easiSpec™

from



1

mm?






3

mm

mm

?




2



adapt 200

adapt 500

adapt 600

adapt 700









®

www.ergochair.co.uk

Use

r W

eig

ht

kgB

ack

Hei

gh

tm

mS

eat

Dep

thm

mS

eat

Wid

thm

m





kg?

mm?





mm?

mm?

190 185 180 175 170 165 160 155 150 145 140 135 130 125 120 115 110 105 100 95 90 85 80 75 70 65 60 55 50 45 40 35

740 730 720 710 700 690 680 670 660 650 640 630 620 610 600 590 580 570 560 550 540 530 520 510 500 490 480 470 460 450 440 430 420 410 400 390 380 370 360 350

660 650 640 630 620 610 600 590 580 570 560 550 540 530 520 510 500 490 480 470 460 450 440 430 420 410 400 390 380 370 360 350 340 330 320 310 300 290 280

620 610 600 590 580 570 560 550 540 530 520 510 500 490 480 470 460 450 440 430 420 410 400 390 380 370 360 350 340 330 320 310 300 290 280 270





adapt®

easiSpec™

®

from

www.ergochair.co.uk

adapt®

easiSpec™

from



1

mm?






3

mm

mm

?




2



adapt 200

adapt 500

adapt 600

adapt 700









®

www.ergochair.co.uk

Use

r W

eig

ht

kgB

ack

Hei

gh

tm

mS

eat

Dep

thm

mS

eat

Wid

thm

m





kg?

mm?





mm?

mm?

190 185 180 175 170 165 160 155 150 145 140 135 130 125 120 115 110 105 100 95 90 85 80 75 70 65 60 55 50 45 40 35

740 730 720 710 700 690 680 670 660 650 640 630 620 610 600 590 580 570 560 550 540 530 520 510 500 490 480 470 460 450 440 430 420 410 400 390 380 370 360 350

660 650 640 630 620 610 600 590 580 570 560 550 540 530 520 510 500 490 480 470 460 450 440 430 420 410 400 390 380 370 360 350 340 330 320 310 300 290 280

620 610 600 590 580 570 560 550 540 530 520 510 500 490 480 470 460 450 440 430 420 410 400 390 380 370 360 350 340 330 320 310 300 290 280 270





adapt®

easiSpec™

®

from

www.ergochair.co.uk

adapt®

easiSpec™

from



1

mm?






3

mm

mm

?




2



adapt 200

adapt 500

adapt 600

adapt 700









®

www.ergochair.co.uk

Use

r W

eig

ht

kgB

ack

Hei

gh

tm

mS

eat

Dep

thm

mS

eat

Wid

thm

m





kg?

mm?





mm?

mm?

190 185 180 175 170 165 160 155 150 145 140 135 130 125 120 115 110 105 100 95 90 85 80 75 70 65 60 55 50 45 40 35

740 730 720 710 700 690 680 670 660 650 640 630 620 610 600 590 580 570 560 550 540 530 520 510 500 490 480 470 460 450 440 430 420 410 400 390 380 370 360 350

660 650 640 630 620 610 600 590 580 570 560 550 540 530 520 510 500 490 480 470 460 450 440 430 420 410 400 390 380 370 360 350 340 330 320 310 300 290 280

620 610 600 590 580 570 560 550 540 530 520 510 500 490 480 470 460 450 440 430 420 410 400 390 380 370 360 350 340 330 320 310 300 290 280 270





adapt®

easiSpec™

®

from

www.ergochair.co.uk

adapt®

easiSpec™

from



1

mm?






3

mm

mm

?




2



adapt 200

adapt 500

adapt 600

adapt 700









®

www.ergochair.co.uk

1

2Move the grey slides on the easiSpec Range Selector to match the key body measurements you’ve recorded

The Range Selector then indicates which adapt chair is best for you by indicating a colour match in each of the four catagories

3

Nobody else is able to offerthis bespoke service.

But then no other chair is an adapt®

adap

t®

600 ... made to

measure

Ergochair Ltd


your local Ergochair distributor is...

made tomeasure

adapt®

600

®

®

®

CompatibilityFound all the right adaptations? Want to know if it’s achievable? Look for the traffic light system to see if an item is compatible with your chosen model of chair. But of course the chances are we will be able to do it - just ask.

®

Basic anatomy and how we can adapt it

Most people know about the major elements that make up an office chair. What’s more interesting though is what we can do to them.

“We tried counting how many different combinations of adaptations we offer but at over 10,000 we figured we probably had it covered”

So, in this adaptations book, we’ve tried to show you as much of what we do as possible, starting right here, with the basics; the anatomy of a chair.

the myth of the average person getting under the skin of an adapt® chairMost ergonomic seating is mass-manufactured on

a component basis aimed at the 50th percentile of the adult population in the belief that it will fit the ‘average’ sized person.

The 50th percentile, however, differs for males and females and also between Asia (where much standard chair componentry is made) and Europe/UK.

The reality is that even the best ‘off-the-shelf’ chair with a standard level of adjustability will only fit up to 40% of the population and even then will not address any specific postural concerns.

Taking care of postural issues and disabilities

We can construct a chair from our Adapt range to fit 99.9% of the adult UK population and we can customise it to support any postural or disability requirements.

The relevant easiSpec guide will then allow you to customise it and create the complete chair pre-scription

“

“

even the best ‘off-the-shelf’ chair will only fit 40% of the population and will not address any specific posture issues...

Commonly experienced pain hotspots

Neck strain and thoracic pain Lumbar and lower back pain Sacral and coccyx issues Sit bones - pressure discomfort

“ 60% of people sit for over 6 hours per day in a chair that doesn’t fit...

“There is no such thing as an average sized person

Which is why we cut the chair to fit the person, so that the starting point or template is the right size for you before we begin to fine-tune it.

Neck Supports• Height and angle adjustable• Different pad shapes and sizes• Can be custom-made

Armrests• Height, width and depth adjustment options• Custom-made options available

Seat• Can be cut to fit you in all the right places• Lots of air-cell and foam modifications available

Mechanism• Wide range available • Free-float function for dynamic sitting• Body-weight tension adjustable

Gas lifts• Huge range of seat heights catered for• Anti-swivel and lock options

Castors• “This is how we roll”• Brake-loaded & unloaded options

Backrest• Can be cut to fit your exact seated height• Lumbar air-cell fitted as standard• Lots of air-cell and foam modifications available

adapt®200

Min

: 156

0mm

- M

ax: 2

210m

m1

2 4

3

Asynchronous Knee-Tilt

Min

: 150

0mm

- M

ax: 2

200m

m

1

2 4

3

Asynchronous Pelvic-Tilt

the adapt® range because people are not made to standard specifications... neither are our chairs

Min

:120

0mm

- M

ax: 2

100m

m

1

2 4

3


Min

: 156

0mm

- M

ax: 2

210m

m

1

2 4

3


adapt®600 adapt®700adapt®500

adap

t®

700 ... The

Heavy-dutySolution

Ergochair Ltd


your local ergochair distributor is...

made tomeasure

adapt® 700

LaunchBrochure

110kg190kg

Min Max1 Back Height 450mm 660mm2 Seat Depth 420mm 570mm*3 Seat width 620mm 620mm**4 Seat Height 490mm 670mm

*Seat depth can be tailored**Fixed seat width

35kg100kg

45kg150kg

45kg150kg

Min Max1 Back Height 350mm 670mm2 Seat Depth 340mm 660mm3 Seat width 410mm 610mm4 Seat Height 430mm 630mm*

*Higher gas columns available for use in specific

environments


*Higher gas columns available for use in specific

environments


*Optional Brake Loaded Footrest / Step will allow

for any minimum lower leg dimension

All Adapt chairs are tested to: BS5459: Part2: 2000

1234 arm rest Height and width adjustable arm restRetractable arm pads – slide actionCode: 1234

Approx. Dimensions: Seat to pad: 150 - 240 mmPad width: 90 mm Pad length: 250 mm

HAA arm restHeight-adjustable arm restWidth adjustable on most chair models (hand wheel) Code: 1233

Approx DimensionsSeat to pad: 150 - 240 mmPad width: 90 mmPad length: 240 mm

level 1 adaptations: arm restsArm rests are the perfect first level of enhancement to your office chairThey should provide support under your elbow without you having to stretch to reach them. The adapt® range of arm rests has been

Gel PadsSupplied as a pair, these gel pads add an extra layer of comfort to our 1234 arm rests Code: GEL

Upholstered armpadIf you’d like to match your arm pads to your chair colour, we can do that!We also make bespoke arm pads for specific needs – talk to us and tell us what you needCode: UPARM / BESPARM

The Upholstered Arm Pad is an optional extra which is added separately and is compatible with 1233, 1234, 4D and WSARM

Compatibility

Rotating armrest Height adjustableBackward rotation functionIdeal for wheelchair transferCode: WSARM

Mobile Support arm restMulti-function arm restDesigned for severe upper-limb disorders and disabilitiesSuitable for light loading onlyCode: MSA

created to give the best possible level of adjustability and function. All of our arm rests are height-adjustable with many of them offering additional width and depth adjust-ment.We can also custom-make arm rest pads to specific sizes and shapes.

200

500

600

700

200

500

600

700

3D Trigger arm rest Height and width adjustable arm restRetractable arm pads – button controlWidth adjustable arm pads – button controlCode: 3DTARM

Approx. Dimensions: Seat to pad: 160 - 250 mm Pad width: 90 mm Pad length: 240 mm

200

500

600

700

4D arm restHeight and width adjustable arm restRetractable arm pads – slide actionWidth adjustable arm pads – slide action Rotatable arm pads – twist action Code: 4DARM

Approx. Dimensions: Seat to pad: 160 - 240 mmPad width: 100 mm Pad length: 240 mm

200

500

600

700

200

500

600

Approx DimensionsSeat to pad: 170 - 250 mmPad width: 45 mm (wrist cup) Pad length: 150 mm (wrist cup)

200

500

600

Approx DimensionsSeat to pad: 160 - 230 mmPad width: 80 mm Pad length: 280 mm

Approx DimensionsPad width: 100 mmPad length: 280 mm

200

500

600

700

200

500

600

700

Approx DimensionsPad width: 80 mm Pad length: 280 mm

200

500

600

Note: Dimensions provided are approximate and in relation to a typical adapt 600 configuration. Please contact us if you need approximate dimensions in relation to other adapt ranges.

ADARMIf our standard arm height adjustment range doesn’t meet your need,we can increase or decrease this by +/- 50 mm using our Adarm bracket.Compatible with 1234, HAA, 3D & 4D arm rests.

Extended FootplateThe third option in this range offers a deeper plate along with the height adjustment function.

Aluminium BaseFive-star base in polished aluminium to enhance the look of your chair. Dimensions: 695 mm (27”)

level 1 adaptations: neck rests, gas lifts, castors, bases foot rests and movement control

If ordered as an option on the adapt 700 chair, a larger version will be supplied

Footring with Half FootplateThe second in our range, the Half Footplate option also offers height adjustment.

MLOCKTM

This clever device will hold your chair still should you need to transfer to and from a wheelchair or prevent the chair from moving, for intricate tasks. Activate the hand or battery pump to inflate the air-cell and engage the non-slip feet. Comes with non-swivel column as standard. Other gas lifts available upon request.

Dimensions: 695 mm (27”) footprint

FootringThis option is the first of our places to rest your feet whilst sitting.

It’s also height adjustable.

Gas lifts We can offer seat heights from approximately 360 mm to 820 mm. Let us know what you need and we can recommend the appropriate gas lift. Optimum seat height is determined not only by your body dimensions but equally by the height of the work surface you use.

Neck curve™As the name suggests, this clever little curve provides support to the neck and base of the skull . Available as a mini, standard or large* version.

Approx. pad dimensions: Mini Standard LargeHeight: 80 mm 80 mm 110 mm Width: 210 mm 270 mm 330 mm

The adapt range of neck rests, castors gas lifts and swivel locksTo enhance your comfort, whilst working, resting or taking a posture-break we offer

a range of head and neck supports. With a variety of pad shapes and sizes. These supports also move and articulate in different ways to provide an option to suit everyone.

200

500

600

700

200

500

600

700

Neck rollThis neck rest offers a deeper, fuller and more rounded cushioning support to the neck. Available in one size.

Approx. pad dimensions:Height: 110 mm Width: 220 mm

V- restThis versatile support can be used as a neck support or as a flatter-style head rest due to the pad shape and multiple articulation points.Available in one size.


200

500

600

700

Head restThis support offers a more traditional, flatter shapeAvailable in one size.


200

500

600

700

Swivel lock Our Swivel Lock gas lift functions as a regular gas lift until you want to keep it still. Raise and lower the handle to lock and unlock as needed.

Castors The right castors can have a huge effect on how your chair moves. As standard we fit 65 mm castors as this enables optimum ‘roll’.For hard floors we offer a soft-wheel option. For alternative movement control we also offer brake-loaded and a brake-unloaded options.

The adapt range of basesWhether you would like to change the way your chair base looks, alter the way it functions, or find a place to rest your feet, we offer a solution to help.

200

500

600

700

200

500

600

700

Dimensions: Depth = 250 mm Width = 500 mm

200

500

600

700

200

500

600

700

Dimensions: Depth = 400 mmWidth = 500 mm (narrowing to 450 mm)

200

500

600

700

Dimensions: Diameter 500 mm

*200

500

600

700

level 2 adaptations: Backrest Modifications

X X

300

160

*200

500

600

700300

300

A

300300

B

200

600

700

Y

X X

Y Right of centre

Y+

Left of centre Y-

Y

Y

X X

Right of centre

Y+200

200

Left of centre Y-

*200

500

600

700

Once the backrest has been specified to fit using the easiSpec system, we can then create the perfect contouring with built-in adjustability, using a combination of air-cells and foam sculpting. All chairs come with an inflatable lumbar cell as standard, so we’ve not shown it here.

We’ll even place it just where you need it on the adapt 200, 600 & 700 ranges

Here are someof our most popular and often specified modifications.

* Available in standard positioning only

Sacral CellThis option offers an inflatable support across the sacrum. Useful for Sciatic and Pelvic support issues.

Thoracic CellAs the name suggests, this air cell can be placed between the shoulder blades to offer thoracic support.

Vertical Support CellThis air cell can be placed on either the left or right hand side (or both) to help accommodate a gap in back contact or offer general lateral support

Sculpted Back FoamWe can tailor, sculpt and shape the foam in our back rests to your specification. Examples shown here. We provide an easiSpec diagram template for you and offer guidance along the way.

200

500

600

700

Memory Foam LayerFor enhanced back rest moulding, we can build in a layer of memory foam with an optional further enhancement of a stitched cover to reduce surface tansion.

Reactive Lumbar CellThis inflatable air-cell has three reactive chambers between which the air is squeezed when pressure is applied. Useful for a larger, gentler lumbar support.

Reactive Vertical CellPlaced vertically this reactive air-cell can help accommodate uneven contact across the back. Useful for Scoliosis and other spine formation issues.

RIG

HT

(as

seat

ed)

X X

LEFT (as seated)

Y

200

600

700

100

200

200

600

700

*200

500

600

700

Thigh Support(Left, right or pair)These inflatable air-cells can be used singly on the left or right side, or as a pair. Useful for muscle-wastage related conditions or to provide pressure relief through the middle of the seat. Approx. cell size is 200 mm x 100 mm

ErgocoreTM Seat CellThis dual-chamber air-cell option sits inside the seat and provides a ‘reactive sit’ to gently activate your core and lower back muscles whilst cushioning your sit bones. Useful for sciatic relief and general core strengthening. Approx. cell size: 380 mm W x 230 mm D

Wave SeatWe can cut the leading edge of the seat to reflect the differences with unequal thigh length. All we need are your measurements from the easiSpec assessment. Minimum seat depth: 340 mm

Split SeatThe Split Seat option has deflecting front sections and is ideal for cases where the thigh length differential is significant, for fused hip or knee joints or to help accommodate a prosthesis. We can custom-make this seat to your measurements. Min overall depth: 450 mm Min width: 410 mm

Coccyx Cut OutThis is the complete cut-out option for pressure relief around the coccyx area. Approx. dimensions of cut-out: 140 mm L x 100 mm WBespoke cut-outs available.

Coccyx ZoneFor a slightly more subtle solution to coccyx issue, the coccyx zone provides an invisible relief zone. Approx. dimensions of zone: 140 mm W x 100 mm W

level 2 adaptations: seat modificationsAs with the back rests, once the seat is cut to size the adaptation begins.We can offer everything from a basic air-cell insert to a fully-tailored solution, giving you unlimited levels of seat customisation.

200

500

600

700

200

500

600

700

200

500

600

Super Memory Foam Seat(adapt 600 only)This high-density visco-elastic foam option offers superior levels of comfort as the seat conforms to you. To enhance this further and get a softer sit, you can opt for a stitched seat cover.

600

LEFT

(as

seat

ed)

FRONTRIG

HT

(as

seat

ed)

200

600

All of our seats come with a memory-foam layer as standard: extra layers are easily added, bespoke cut-outs are available.

What happens next is up to you.

200

500

600

*200

500

600

700

200

500

600

700

* Available in standard size / positioning only

Extra Memory Foam LayerWe can add extra memory foam layers to any chair. Each layer is approx. 20 mm thick (non-compressed)

because people are not made to standard specifications...

...neither are our chairsU

ser

Wei

gh

tkg

Bac

k H

eig

ht

mm

Sea

t D

epth

mm

Sea

t W

idth

mm





kg?

mm?





mm?

mm?

190 185 180 175 170 165 160 155 150 145 140 135 130 125 120 115 110 105 100 95 90 85 80 75 70 65 60 55 50 45 40 35

740 730 720 710 700 690 680 670 660 650 640 630 620 610 600 590 580 570 560 550 540 530 520 510 500 490 480 470 460 450 440 430 420 410 400 390 380 370 360 350

660 650 640 630 620 610 600 590 580 570 560 550 540 530 520 510 500 490 480 470 460 450 440 430 420 410 400 390 380 370 360 350 340 330 320 310 300 290 280

620 610 600 590 580 570 560 550 540 530 520 510 500 490 480 470 460 450 440 430 420 410 400 390 380 370 360 350 340 330 320 310 300 290 280 270

The Range SelectorMove each slide to select the nearestvalue for each of the user’s measurements

A colour match in all four categories will indicate which adapt® range is best suited to the user

adapt®

easiSpec™

®

from

www.ergochair.co.uk

adapt®

easiSpec™

from



1

mm?


point whilst they are seated. Placing a ruler, piece of card or thin book vertically against the sides of the user, then measuring in between, will help

3

mm

mm

?


may find It easier to place a piece of card or a thin book behind the user to assist with finding the correct start point

2

4 Go to the corresponding easiSpec™ guideHere’s a quick overview of the adapt® ranges:

adapt 200

adapt 500

adapt 600

adapt 700





If you would like to talk to someone about using this guide, we’re always on hand to help:

Just call us on 01454 329210 or email:[email protected]

®

www.ergochair.co.uk

Our Adaptions™ range is constantly growing in response to each and every new challenge or project

So, if you don’t see what you need within this book, come and talk to us…

includes a totally bespoke section, plus our in-house manufacturing and testing capability means we can go back to the drawing board and design something completely new!

®

Documents

adaptations - Ergochair · adaptations TM adapt®200 adapt®500 adapt®600 adapt®700 adapt ® 7 00... The Heavy-duty Solution Ergochair Ltd t: 01454 329210 f: 01454 329266 e: [email protected]