ACE Light Source - Alan Wood’s Web site · Extension Cord 115 Volt ACE® Remote Light Source with EKE lamp, A20560 ACE® Remote Light Sources ACE® Remote Light Sources with Iris

LLiigghhtt SSoouurrccee wwiitthhoouutt MMoodduullaammpp® UUnniitt

ACE® Light Source with EKE lamp, A20500

ACE® Light Source Models

LLiigghhtt SSoouurrcceess wwiitthh IIrriiss DDiiaapphhrraaggmm

SSttaannddaarrdd LLiigghhtt SSoouurrcceess

EKE, DDL, and EJA lamps and Modulamp® unitscan be purchased separately.

115 Volt 230 Volt Description

A20500 A20510 EKE Lamp

A20500.1 A20510.1 EJA Lamp

A20500.2 A20510.2 DDL Lamp


A20520.1 A20530.1 EJA Lamp

A20520.2 A20530.2 DDL Lamp

A20500.115 A20510.230 No LampPower Supply Only

ACE® Light SourceCompact, rugged, AC halogen light source with solid state dimmer for variable

light intensity and maximizing lamp life.

Standard Featuresn Solid state dimmer for continuous control zero to full intensity.n Heavy duty, grounded metal housing.n 115 or 230 input voltage versions available.n IR interference filter for cool illumination.n Full illumination on .60" active diameter input.n Interchangeable Modulamp® Units offer 2 positions to maximize individual

lamp efficiencies. n Choice of three, 150 watt halogen lamps - EJA, EKE, and DDL for intense,

uniform illumination.n Built-in thermal shut down.n Quiet rear exhaust.n CSA approved to UL spec, CE compliant to low voltage and EMC directives.n Stackable with retractable handle.n Low housing temp - slightly above ambient.n Detachable IEC cord.n 3-year warranty (excludes lamp and socket).n Manufactured in the USA.

AA2200550000

Optionsn Rear baffle.n Dimmer lock.n Shutter module.n Private labeling available.n Infinite setting, thirteen blade iris

diaphragm version available to reduce

intensity while maintaining color

temperature.n ACE® Remote light source is also

available. See section 01.01.05 in

product catalog.

01.01.01 REV G

CCoolldd VViiss iioonn SSeerr iieess

Power Consumption 190 Watts (nominal)

Output Voltage 0 - 21 VAC

Fiber Receptacle .720 (13.3 mm)

Input Voltage 115 VAC / 60 Hz

230 VAC / 50/60 Hz

Temperature Range: Operating 0° to 50°C

Power Supply Specifications

Modulamp® Unit with Iris Diaphragm

Product improvements may result in specificationor feature changes without notice.

Fiber OpticsSCHOTT North America, Inc.62 Columbus StreetAuburn, NY 13021-3137USAPhone: +1315/255-2791Fax: +1315/255-2695E-mail: [email protected]/fiberoptics

G20500.ai

Modulamp®... SCHOTT Innovation!Two positions optimize light intensityoutput, depending on the lamp in use.Entire housing is interchangeable forquick setup.

Choice of Lamps.. SCHOTT Versatility!Three different bulbs (EJA, EKE, DDL)offer light intensity and color temper-ature options to maximize productivity and accuracy.

Solid State Dimmer..SCHOTT Control! Continuous intensity control for lamp life management.

Input: 115 VAC/60 Hz, 230 VAC/50/60 Hz, Output: 0–21 VAC

ACE® Light SourceDimensions in ( ) are in mm

Extension Cord

115 Volt ACE® Remote Light Source with EKE lamp,A20560

ACE® Remote Light Sources

ACE® Remote Light Sources with Iris

EKE, DDL, and EJA lamps and Modulamp® units canbe purchased separately.

115 Volt 230 Volt Description


A20560.1 A20570.1 EJA Lamp

A20560.2 A20570.2 DDL Lamp

A20580 A20590 EKE Lamp and Iris

A20580.1 A20590.1 EJA Lamp and Iris

A20580.2 A20590.2 DDL Lamp and Iris

A20560.115 115 V Power Supply Only

A20570.230 230 V Power Supply Only

A29505 10' extension - CE and CSA Comp.

ACE® Remote Light SourceAll the features of our universally accepted ACE® light source with the added

convenience of the following:

Remote Features n 6' shielded black cable provides remote intensity control, including

ON/OFF. n Positive locking, quick disconnect cable will not pull out.n CSA approved to UL spec, CE compliant to low voltage and EMC directives.n 10' shielded extension available as an option.n Control assembly is supplied in black only.n Quantities delivered in 4-5 weeks.

Standard Features

n Heavy duty, grounded metal housing.n 115 or 230 input voltage versions available.n IR interference filter for cool illumination.n Full illumination on .60" active diameter input.n Solid state dimmer control.n Interchangeable Modulamp® Units offer 2 positions to maximize individual

lamp efficiencies.n Choice of three, 150 watt halogen lamps - EJA, EKE, and DDL for intense,

uniform illumination.n Built-in thermal shut down.n Quiet rear exhaust.n Zero to full intensity.n Stackable with retractable handle.n Low housing temp - slightly above ambient.n Detachable IEC cord.n 3-year warranty (excludes lamp and socket).n Manufactured in the USA.

A20560

Optionsn Rear baffle.n Shutter module.n Infinite setting, thirteen blade iris



temperature.

01.01.05 REV F

Power Consumption 190 Watts (nominal)

Output Voltage 0 - 21 VAC

Fiber Receptacle .720 (13.3)

Input Voltage 115 VAC / 60 Hz

230 VAC / 50/60 Hz



ACE® Remote Power Supply Modulamp®/lamp not included

10" Extension Cord with CPC connectors, A29505

ColdVis ion Ser ies



Modulamp®... SCHOTT Innovation! Twopositions optimize light intensity output,depending on the lamp in use. Entirehousing is interchangeable for quicksetup.

Choice of Lamps.. SCHOTT Versatility!Three different bulbs (EJA, EKE, DDL) offerlight intensity and color temperatureoptions to maximize productivity and accuracy.

Solid State Dimmer..SCHOTT Control! Continuous intensity control for lamp life management.

Input: 115 VAC/60 Hz, 230 VAC/50/60 Hz, Output: 0–21 VAC

ACE® Remote Light SourceDimensions in ( ) are in mm

DCR ® III Light Source with EKE lamp, A20800

DCR® III Light Source Models

Light Sources with Iris Diaphragm and US Power Cord Included

Standard Light Sources with US Power Cord Included


Part No. Description

A20800 with EKE Lamp

A20800.1 with EJA Lamp

A20800.2 with DDL Lamp




A20801 No Lamp – Power Supply Only




DCR® III Light SourceDC regulated light source provides intense, cool illumination.

Standard Features■ DC-regulated light source limits light fluctuation to ± 0.5% due to

line voltage variation.■ Universal input voltage – accepts 90 to 265 VAC.■ Current limiting – protects the unit from over heating due to defective and

aging bulbs.■ Transient protection – allows remote location of bulb.■ Lamp change indicator light – LED located on front panel changes from

green to red when lamp should be replaced. This is due to either an open

or partially shorted filament.■ Soft start “lamp saver” circuitry.■ IR interference filter for cool illumination.■ Solid state dimmer control for continuous dimming.■ Interchangeable Modulamp® Units offer 2 lamp positions to maximize

individual lamp efficiencies.■ Choice of three, 150 watt halogen lamps - EJA, EKE and DDL for intense,

uniform illumination.■ Can power the RS232 from the 9-pin connector.■ Built-in 9-pin connector for analog remote control or RS-232 connection.■ Detachable IEC cord.■ Quiet rear exhaust.■ CSA approved to UL spec, CE compliant.■ Stackable, with retractable handle.■ Low housing temp – slightly above ambient. ■ 2-year warranty (excludes lamp and socket).■ Manufactured in the USA.

A20800

Options■ Rear baffle.■ Dimmer lock.■ Mechanical shutter.■ Wired, manual remote control and

RS232 connection.■ Infinite setting, thirteen blade iris



temperature.

01.10.01 REV F

Rated Power Output 150 Watts

Output Voltage 0.0, 0.5 to 20.5 VDC

Input Voltage Rating, 50/60 Hz. 90 to 265 VAC

Power Factor Correction @ 230 VAC, 50 Hz. > 0.99, < 4°

Hold-up Time, Nominal AC Input, Full Load 8.3 milliseconds

Line Regulation, Over Entire Input Range ±0.5%

Current Limit Set Point 8.5 Amps


Storage -25° to 85°C

Relative Humidity, Non-condensing 5% to 95%


ColdVis ion Ser ies

LIG

HT

SO

UR

CE

S

Light Source without Modulamp® Unitand US Power Cord Included

Standard Light Sources EU Version - No Power Cord Included

Light Sources with Iris Diaphragm EU Version - No Power Cord Included


Fiber Optics

SCHOTT North America, Inc.62 Columbus StreetAuburn, NY 13021-3137USAPhone: +1315/255-2791Fax: +1315/255-2695E-mail: [email protected]/fiberoptics


Choice of Lamps.. SCHOTT Versatility!Three different bulbs (EJA, EKE, DDL) offerlight intensity and color temperatureoptions to maximize productivity and accuracy.

Note: If the intensity control knob is turned to the R (Remote) position, lamp intensity control isswitched to the rear 9-pin connector. Front panelintensity control will always override the remoteintensity control.

Input: 115/230 VAC – 50/60 Hz, Output: 0–20.5 VDC

DCR® III Plus Light SourceDimensions in ( ) are in mm

TE

CH

NIC

AL

SP

EC

IFIC

AT

ION

S
















A20665 Triple Cable with Plug, 12"

DCR® III Plus Light SourceIncludes all the standard features of the DCR® III in addition to a built-in RS232

interface providing intense, cool illumination via remote control.

Benefitsn Remote controllable using built-in integrated RS232 interface.n Designed to control up to three additional DCR® III units via a built-in

15-pin connector. Expansion cable and DCR® III light sources sold separately.n Automatically restores user settings on power up.n Enhanced communications available by embedding error checking codes in

command strings.n Easier programmability with simplified command structure.

Standard Featuresn DC-regulated light source limits light fluctuation due to line voltage

variation up to ±0.5%.n Current limiting circuitry protects the unit from over heating due to

defective and aging bulbs.n Lamp indicator light (LED) located on front panel changes color from green

to red when lamp requires replacement. Lamp status output on RS232 is

available.n Solid state intensity control adjusts from 0 to 100% light output.n Interchangeable Modulamp® units offer 2 lamp positions to maximize

individual lamp efficiencies.n Soft start “lamp saver” circuitry.n IR interference filter for cool illumination.n CSA certified to UL, CE compliant to low voltage and EMC directives.n Universal input voltage – accepts 90 to 265 VAC, 50/60 Hz.n Stackable, with retractable handle and detachable cord.n 2-year warranty (excludes lamp and socket).n Manufactured in the USA.

Light Source without Modulamp® Unit

US Power Cord Included

DCR ® III Plus Light Source with EKE lamp, A20870

DCR® III Plus Light Source Models

Light Sources with Iris Diaphragm

US Power Cord Included

Standard Light Sources US Power Cord Included


A20870

Optionsn Rear baffle.n Dimmer lock.n Mechanical shutter.n Infinite setting, thirteen blade iris



temperature.n Expansion cable.n Remote light source.











01.11.01 REV D


ColdVis ion Ser iesL

IGH

T S

OU

RC

ES

Expansion Cable


Light Source with Iris Diaphragm

EU Version - No Power Cord Included

Light Source without Modulamp® Unit

EU Version - No Power Cord Included




Choice of Lamps.. SCHOTT Versatility!Three different bulbs (EJA, EKE, DDL) offerlight intensity and color temperatureoptions to maximize productivity andaccuracy.

Note: If the intensity control knob is turned to the R (Remote) position, lamp intensity control isswitched to the RS232 interface. Front panel intensi-ty control will always override the remote intensitycontrol. Remote control of attached DCR IIIs isdependent on each individual unit’s setting, whichshould be in R (Remote) position for remote control.

DCR® III Plus Light SourceDimensions in ( ) are in mm

9-PIN Connector

User SuppliedRS232 M-F Extension Cables

15-PIN Connector

SCHOTT EXPANSIONCABLE (A20665)

DCRIII Plus/IV Light Source

ComputerSerial Port DCRIII Light Source

DCRIII Light Source

DCRIII Light Source

9-PIN Connector

Light Source without Modulamp® UnitUS Power Cord Included

DCR ® IV Light Source with DDL lamp, A20890

DCR® IV Light Source Models

Light Source with Iris Diaphragm US Power Cord Included

Standard Light Sources US Power Cord Included

DDL lamp and Modulamp® units can be purchasedseparately.


A20890 Integrated Equalizer™ (complete with

Reference Modulamp® assembly

and DDL Lamp).


Modulamp® assembly and DDL Lamp.

Does not include reference bundle).

A20892 Modulamp® with DDL Lamp



Reference Modulamp® assembly

and DDL Lamp).


Modulamp® assembly and DDL Lamp.

Does not include reference bundle).

A20897 Modulamp® with DDL Lamp


A20665 Triple Cable with Plug, 12"

DCR® IV Light SourceDC regulated light source with integrated Equalizer™ light feedback to provide

stabilized light output for the most demanding machine vision inspection

applications. (See DCR® III Plus datasheet for base description.)

Benefitsn Stable lamp output over the life of the lamp and minimized lamp to lamp

variation.n Remote controllable using integrated RS232 interface.

Standard Featuresn Flexible - Two configurations available:

A. DCR® IV used with a reference Modulamp® unit and off-the-shelf fiber

optics, maintains DDL lamp output at ±2% over the life of the lamp and±8% lamp to lamp.

B. For even greater control, use the DCR® IV with fiber optic products that

have an integrated reference bundle; special order only. This will

maintain DDL lamp output and lamp to lamp variation within ±1%. n All of the features of the DCR® III Plus Light Source including control of up

to three additional DCR® III light sources via an expansion cable.n LED’s located on the front panel indicate that the lamp intensity is stabilized.n Easy to use front panel controls for calibration and intensity control.n CSA certified to UL, CE compliant to low voltage and EMC directives.n Universal input voltage – accepts 90 to 265 VAC, 50/60 Hz.n Stackable, with retractable handle and detachable cord.n 2-year warranty (excludes lamp and socket).n Manufactured in the USA.

A20890

Options

n Rear baffle.

n Dimmer lock.

n Mechanical shutter.

n Infinite setting, thirteen blade iris diaphragm

unit available to reduce intensity while

maintaining color temperature. Cannot be

used with reference Modulamp®.

n Expansion cable. 01.12.01 REV D

Light Output with Reference Modulamp Unit ±2%

Light Output with Independent Reference Bundle ±1%

Lamp to Lamp Variation with Reference Modulamp Unit ±8%

Lamp to Lamp Variation with Independent Reference Bundle ±1%







Lamp Type DDL, Ushio or GE, 150 W Halogen Bulb





Performance Specifications

ColdVis ion Ser ies

Expansion Cable



Light Source with Iris Diaphragm EU Version - No Power Cord Included

Light Source without Modulamp® UnitEU Version - No Power Cord Included



DDL lamp is offered as the standard lampfor this unit.

Note: If the intensity control knob is turned to the R (Remote) position, lamp intensity control isswitched to the RS232 interface. Front panel intensi-ty control will always override the remote intensitycontrol. Remote control of attached DCR IIIs isdependent on each individual unit’s setting, whichshould be in R (Remote) position for remote control.

DCR® IV Light SourceDimensions in ( ) are in mm

9-PIN Connector

User SuppliedRS232 M-F Extension Cables

15-PIN Connector

SCHOTT EXPANSIONCABLE (A20665)

DCRIII Plus/IV Light Source

ComputerSerial Port DCRIII Light Source

DCRIII Light Source

DCRIII Light Source

9-PIN Connector

60%

65%

70%

75%

80%

80%

85%

90%

95%

100%

0 5 10 15 20

Lamp Intensity vs. Time

Equalizer™ LightFeedback Module

DC Regulated Light SourceWithout Feedback

Equa

lizer

™M

odul

e

DC

Regulated

LightSourceW

ithoutFeedback

Days

DDDDLL

MHR ®-50 Light Source, A20900

MHR®-50 Light Source Models


A20900 MHR-50 with 50W Lamp

A20901 Replacement 50W Lamp

MHR®-50 Light SourceCompact metal halide regulated light source for applications that

require bright, white light.

Standard Features■ Color temperature of 6000K.■ Twice the light output of DDL lamps.■ Bulb lifetime of 3500 hours average at 50W output.■ Metal halide lamp specifically designed with highest uniformity.■ Solid state dimmer control.■ Heavy duty, grounded metal housing.■ Universal input voltage - accepts 90 to 265 VAC.■ IR interference filter for cool illumination.■ Full illumination on .50 active diameter input.■ Soft start “lamp saver” circuitry.■ Built-in 9-pin connector for analog remote control.■ Built-in thermal shut down.■ Quiet rear exhaust.■ Infinite setting, thirteen blade iris diaphragm to reduce intensity while

maintaining the color temperature.■ Stackable with retractable handle.■ Low housing temp - slightly above ambient.■ Detachable IEC cord.■ CSA approved to UL spec, CE compliant.■ 2-year warranty (excludes lamp and socket). ■ Manufactured in the USA.

Benefits■ More light output than Halogen

Lamps with similar lifetimes.■ Extremely high light output available

at shorter lifetimes.■ Extremely high uniformity.

01.15.01 REV A

Rated Power Output 40 to 60 Watts

Output Current @ 50V 0.8A to 1.3A


Input Surge Current (cold start) Less than 37A

Input Frequency 47 - 63 Hz

Hold-Up Time, nominal AC input, full load 500 ms

Efficiency, nominal AC line, full power 72 - 85% typ.



Relative Humidity, non-condensing 5% to 95%

Light intensity PARD (Periodic and Random Deviation) - Better than 80 dB down

FCC & VDE - Class A EMI Filter


ColdVis ion Ser ies

LIG

HT

SO

UR

CE

S


MHR®-50 Light SourceDimensions in ( ) are in mm

TE

CH

NIC

AL

SP

EC

IFIC

AT

ION

S

Lamp Output, without filters

Fiber Optics

SCHOTT North America, Inc.62 Columbus StreetAuburn, NY 13021-3137USAPhone: +1315/255-2791Fax: +1315/255-2695E-mail: [email protected]/fiberoptics

Diffuse DomeFor use with 4” Fiber Optic Ringlight A08700

Standard Features� Eliminates specular glints and/or shadows on reflective parts� Used in conjunction with 4” diameter ringlight A08700� 4.9” (124 mm) diameter x 2.70” (69 mm) height (without ringlight)� Viewing aperature: 0.98 (25 mm)

Typical Applications

� Data matric code reading� OCR/OCV� Semiconductor wafer inspection� Foil inspection� Can inspection

Diffuse Dome A25045 with Ringlight, A08700(Ringlight not included)

01.22.10 REV A

Diffuse Dome A25045 with Ringlight, A08700(Ringlight not included)

ColdVis ion Ser ies

Dimensions in [ ] are mm. All other dimensions are Inches.


Lighting and ImagingSCHOTT North America, Inc.122 Charlton StreetSouthbridge, MA 01550USAPhone: +1508/765-9744Fax: +1508/764-6273E-mail: [email protected]/lightingimaging

Documents

ACE Light Source - Alan Wood’s Web site · Extension Cord 115 Volt ACE® Remote Light Source with EKE lamp, A20560 ACE® Remote Light Sources ACE® Remote Light Sources with Iris