About us

History

Company Goal

Navutec has defined three core assets which shall form the basis for all employeesbehavior both internally and externally: Efficiency, Innovation and Responsibility.

• To be flexible in order to adopt changes in technology, market and societyand to be able to solve all kinds of challenges that arise.

COMPANY PROFILE

The main goal is to create profit for future growth and R&Dby taking care of customers, employees, cooperating partners and the interests of societyin general. The economic assets shall be created through profitable and healthy growth.This growth is based on developing solutions which simplify the use and enhances the value ofadvanced technology. Through this will contribute to provide the customers with a freedom ofchoice and a greater number of opportunities.

Navutec designs, produces, assembles, tests, installs and does commissioning onan enormous variety of high quality active firefighting systems for offshore, marine industriesand onshore.

The knowledgeable staff at Navutec is incredibly experienced,with some employees having worked in the active fireprotection industry for over 15 years.

Our Objectives

and to be able to solve all kinds of challenges that arise.

• To be innovative in a constant search of new opportunities for development and growth.

• To be responsible with realistic expectations, deliver as promised and have an active relationship to the society which this company is part of.

• Promoting a positive culture based on improving our HSE performance;• Complying with all legal and regulatory requirements;• Providing training and resources for staff to maintain safe systems of work;• Designing products for world’s best practice to achieve sustainable HSE objectives.• Integrating HSE management into all aspects of the organization;• Employing contractors who aspire to the same HSE standards.

02

Memo

39

Project ManagementTop quality project management is a vital key to the successful delivery of a wide range offire and safety systems for engine rooms, cargo spaces and deck areas for all types ofcommercial vessels, FPSO and Rigs. At Navutec, we ensure that project management isperformed by individuals that fully understand every aspect of project management processes.We focus on standardizing and following project management policies, processes, and methods.

• System functional specifications• Reliability and availability studies• Factory Acceptance Test (FAT)• Commissioning• Fire risk consideration and selection on type of fire• Preparation of fire protection plot plans, piping• Instrument diagrams• Design of layout drawings

Qualification• Technical safety design• Fire and explosion protection• Firewater ring main and distribution system design• Static and transient hydraulic calculations• Design by NFPA, PED, SIL, ATEX, ASME, API, ANSI, BS, DNV, Lloyds, NMD, NORSOK etc.

Engineering Service

COMPANY PROFILE

Factory & Test Facility

• Design of fire fighting system• Hydraulic calculations• Material selection• Functional specification• SDRL and data sheets• Estimated cost, delivery time and needed recourses

• Factory - Fabrication Shop : 826 m2 / Crane 5ton x 2ea - Assembly Shop : 662 m2 x 2ea - Warehouse : 826 m2

• Test Facility - Water Tank : 6,000 liter x 2set - Pump Capacity : 550 m3/hr at 7bar

03

DESIGN & MANUFACTURING

1. DESIGN & MANUFACTURING - DIFF SYSTEM UNIT / HELIDECK - FIRE MONITOR & TANK UNIT / HELIDECK - DUAL AGENT SKID UNIT - DELUGE SKID - SPRINKLER TANK UNIT - WATER MIST SKID UNIT - FOAM TANK UNIT - HELI-REFUELING PACKAGE - QUICK CLOSING VALVE UNIT - N2 REDUCING CABINET - INSTRUMENT & CONTROL PANEL - FABRICATION

PIPE SPOOL - PIPE SPOOL2. SYSTEM EQUIPMENT3. FIRE FIGHTING SYSTEM FOR CONTAINER CARRIERS

04

DESIGN & MANUFACTURING

DIFF SYSTEM UNIT / HELIDECKSpecificationSpecificationThe DIFF system consist of deck integratedpop-up nozzles, foam skid and release panels.Standard design criteria is CAP437, but the systemcan be delivered according to any regulations andrequirements. The nozzles are installed flush withthe deck top surface. When the system is releasedthe nozzles will be lifted up by the water pressure andmake an effective spray distribution of water/foam

FIRE MONITOR & TANK UNIT / HELIDECK

make an effective spray distribution of water/foammixture to the entire landing area.

SpecificationThe helideck systems include self containedfoam stations consisting of combinedhose reels and monitors as per CAP 437requirements. The foam tanks meeting specificrequirements are also provided depending onthe client's requirements

FIRE MONITOR & TANK UNIT / HELIDECK

the client s requirements.Detailed engineering and construction drawingsare provided.

DUAL AGENT SKID UNITSpecificationDual Agent Units are manually operated units,discharging dry chemical powder and water/foam,intended to be used by trained firefighting personnel.These Units are extremely efficient for protection ofThese Units are extremely efficient for protection ofareas containing hydrocarbons or alcohols, such ashelicopter decks and process areas.The Dual Agent hose reels are supplied with twoindividual hoses, where one hose is flowing drychemical and the other is flowing water/foam.The hoses are connected to a common nozzle, givingindividual control of the two agents.The Dual Agent Units must be installed in the vicinityThe Dual Agent Units must be installed in the vicinityof the area they are to protect.

05

06

DESIGN & MANUFACTURING

FOAM TANK UNITSpecificationThe fixed deck foam system protects the cargotank deck area from fires. The system is designed forsafe, simple and reliable operation., p pOperating instructions are located in the foam central:an operator stands by with the foam monitor on deck.The system consists of two main elements :the foam monitors and the foam central.

FOAM TANK SYSTEMSpecificationType : Foam systemType : Foam systemFoam storage tank : 20,000L x 2 tanks 30,000L x 2 tanksTank material : PE

FOAM SYSTEM IN CONTAINERSpecificationType : Foam system in containerFoam storage bladder tank : ASME SECTION VIII 1200 GalContainer house :Carbon steelInside : Elec. heater and Lighting

07

DESIGN & MANUFACTURING

HELI-REFUELING PACKAGESpecificationIt has to be equipped with Heli-decking-facilities.Among its facilities, Heli-Refueling System is a Devicethat supplies fuel to the helicopter in case ofpp pemergencies. This Heli-Refueling System consists ofTank Skid & Pump Unit and Dispensing Unit.The using of Heli-Refueling System in offshore,it has a very strict Rule and Code Compliance.

It has to be based on SOLAS(Chap. II-2/Part G-Reg.18)and CAP 437(7th) usually.The helideck, it should be installed on platform or shipin offshore.

QUICK CLOSING VALVE UNITSpecificationThe quick closing valves are designed to ensureThe quick closing valves are designed to ensurea safe and simple operation.The low height also allows the usage in narrow spaces.They are available in nodular cast iron, cast steel andbronze.For pipes from DN 15 up to DN 200, in straight andangle type, with flanges acc. to DIN, ANSI or JIS.On request our Quick Closing Valves are availablein the design "fire-safe" and/or with position indicationg / pby installed limit switches.

The valves are type approved by ABS, GL, LR, BV and DNV.

N2 REDUCING CABINETSpecificationThe N2 reducing cabinet is one of consists ofNitrogen Membrane Inert Gas System which installedon a wide range of ships that require a clean, dryinert gas, either for maintaining a non-explosiveatmosphere in the cargo tanks or for preservationof cargo quality, and for gas carriers requiringprotection of insulation from damage by icingprotection of insulation from damage by icing.

08

DESIGN & MANUFACTURING

INSTRUMENT & CONTROL PANEL

FABRICATION

PIPE SPOOL

09

SYSTEM EQUIPMENT

PROPORTIONERSpecificationThe balanced pressure proportioner PP induces foamconcentrate into the water feed line.The proportioning rate can be adjusted on site.p p g jThe foam concentrate is supplied to the proportionerby a foam concentrate pump.The proportioning accuracy is maintained duringvariations in the water flow and pressure.The water flow range is related to the system pressuredrop, caused by the proportioner.

Inlet : ANSI or DIN counter flangeMaterial : BronzeType : NP-100/50, NP-150/50, NP-200/80

SpecificationThe fog/jet fire monitor, SOM is powerful units with

WATER / FOAM MONITOR

The fog/jet fire monitor, SOM is powerful units withexceptional good throw characteristics.It is designed for an optimized delivery of water orfoam in a solid het as well as in a spray pattern.The monitor is self-oscillating by a water-driven turbine,and has a low weight due to the welded stainless steeland bronze construction.The SOM S has an integrated foam concentrateinductor, eliminating the need for a separate, g pproportioning system. When running with foamthe SOM S shall be adjusted to nominal capacity foraccurate proportioning. The loose inlet flange allowsfor easy mounting and adjustment for the oscillatingsweep area direction.

WATER OSCILLATING DEVICESpecificationThe self oscillating device transforms an existingmanual station monitor into an oscillator.Type : WOD-100 & WOD-80Applicable fluid : Sea water, FoamMaterial : Stainless SteelColor : Fire RedOscillating angle : 30 50 70 100 degreeOscillating angle : 30, 50, 70, 100 degreeMax. working pressure : 16 barBase flange connection :- WOD-100 : 100 DIN PN16 , 4" ANSI 150LBS or 100A JIS B 2210 10K- WOD-80 : 80 DIN PN16, 3" ANSI 150LBS or 80A JIS B 2210 10K

10

SYSTEM EQUIPMENT

HYDRANT PILLARSpecificationMaterial : Cu-Ni 90/10, Stainless Steel or Carbon Steel (or other optional)Size : 6", 4" or 3" (or other optional), ( p )Outlet : Flange End or with ValveFinishing: Red painted or Natural

FOAM HOSE REEL UNITSpecificationType : Fire hose reel with foam tankType : Fire hose reel with foam tankMaterial : Hose reel : Galvanized steel or stainless steel Water way : Gunmetal/stainless steel Hose : Oil resistant, antistatic rubber hose Foam tank : Stainless steel or carbon steel

HOSE REELSpecificationType : Foam / water hose reelMaterial : Galvanized steel or Stainless SteelPainting : Fire Red

11

SYSTEM EQUIPMENT

MULTI NOZZLESSpecificationPremium quality water range of water spray nozzlesare designed for use in properly engineered fireprotection systems Ideal for providing exposureprotection systems. Ideal for providing exposureprotection for capital equipment in refineries,offshore platforms, power stations, process plantand LPG/LNG installations.

Material : Stainless Steel, Bronze or Titanium (or other optional)

SpecificationThe Low Expansion Foam Nozzles consist of a body

FOAM SPRAY NOZZLE

The Low Expansion Foam Nozzles consist of a bodyand deflector especially designed for an optimizedfoam distribution.The foam solution stream is fractioned and air is suckedin inside brass body, and then distributed by thedeflectorwith covering angles up to ~ 100°.Foam expansion rate typically 1:5.

Material : Body - Brass / Seat - Stainless SteelModel : US30, US50, US80, US100, US150

PRESSURE/VACUUM RELIEF VAVLESpecificationType : PRV 1 1/2" TwinactMaterial : Stainless Steel 316Operation : AutomaticPressure setting : 0.21 barVacuum setting : 25.4 mm HgConnection : 1 1/2" BSP maleWeight : 0 64 kgWeight : 0.64 kg

12

FIRE FIGHTING SYSTEMFOR CONTAINER CARRIERSFOR CONTAINER CARRIERS

WATER MIST LANCE & SPECIAL HAMMER NVT WM-LANCESpecificationApplication : IMO's Marine Safety Committee's 96rd session and SOLAS Reg. II-2/10.7.3.2Type : NVT WM-LANCEypMaterial : Lance - Stainless Steel 316 Hammer - SteelMax.Working pressure : 20 barNominal capacity : 72 LPM at 4 barNominal discharge length : over 10m at 4 barCertificate : KR Type Approval

MOBILE WATER MONITOR WM-80MSpecificationApplication : Mobile water monitor for the protectionApplication : Mobile water monitor for the protection of on deck container stacks in accordance with SOLAS Reg. II-10.7.3.2 & MSC.1/Circ.1472Material : Body - Stainless Steel 316 Nozzle : Bronze/BrassVertical swivel range : 0 ~ 90 degreeHorizontal range : 0 ~ 250 degreeMax. Working pressure : 16 barg pNominal capacity : 1300 LPM (78m3/h) at 4 barNominal discharge length : over 40m at 4 barOperation : ManualCertificate : KR Type Approval

13

SAFETY EQUIPMENT

1. FIREMAN'S OUTFIT2. FIRE EXTINGUISHERS3. HYDRANT EQUIPMENT4. PERSONAL PROTECTION EQUIPMENT5. HELIDECK RESCUE EQUIPMENT6. OTHER

14

FIREMAN'S OUTFIT

AIR BREATHING APPARATUSSpecificationType :SCBA_RN-A1603Air cylinder volume : 6LAir storage capacity : 1800Lg p yNormal working pressure : 300BarAlarm pressure : 55 ± 5BarDuration : 55 min at an average consumption of 30 l/min for a single userWeight : Approx 15kg (including air cylinder)Approval : MED

FIRE SUITSpecificationType : Proximity fire-fighting suit with BagType : Proximity fire fighting suit with BagTesting Standard : Fire suit : EN469 Helmet : EN443 Gloves : EN659, EN60903 Boots : EN 345-2 Suit Size : XL (available for other size )Approval : MED 96/98/EC (Amended on April 2009)

FIRE AXE WITH COVERSpecificationType : Shaft typeMaterial : Steel head, Rubber shaft coverDesign Standard : DIN 14924Weight : 1 Kg

15

16

17

18

19

20

21

22

FIRE EXTINGUISHERS

PORTABLE FOAM APPLICATORDescriptionDescriptionType : Low expansion branch pipe with Foam LiquidDevice Capacity : 20 LtrFoam Liquid : ProteinWeight : Empty : 9 kg / Full : 33 kgApproval : RINA

MOUNTING BRACKET / PORTABLEMOUNTING BRACKET / PORTABLEDescriptionType : Mounting Bracket / Portable TypeMaterial : SteelColor : RedWeight : 1.5 kg

MOUNTING BRACKET / MOBILEDescriptionType : Mounting Bracket / Mobile TypeMaterial : Stainless SteelColor : NaturalWeight : 0 5 kgWeight : 0.5 kg

23

HYDRANT EQUIPMENT

JET SPRAY NOZZLE / NV-NOZZLESpecificationSpecificationType : Combined Spray/Jet Water NozzleMaterial : Operated head : Rubber and Brass, chrome-plated Body : Polyethylene(POM), impact-resistant, resistant to high & low temperaturesWorking Pressure : Up to 16 barNozzle Type : NV-12, NV-16 & NV-19Inlet Connection : 2" BSP Male ThreadWeight : 0 8 kgWeight : 0.8 kgApproval : MED

TURBOJET NOZZLE WITH PISTOL GRIPTURBOJET NOZZLE WITH PISTOL GRIPSpecificationType : 1-1/2'' Turbojet nozzle with pistol gripNominal Pressure : 16 barDesign Pressure : 40 barInlet Connection : 1 1/2'' (38 mm)Design Code : EN15182-1 and 2 type 3Approval : MEDApproval : MED

JET SPRAY NOZZLE / BRANCHPIPESpecificationType : Man protection Device TypeMaterial : BrassWorking Pressure : 16 barNozzle Tip : 12mm 19mmNozzle Tip : 12mm, 19mmWeight : 3.9 kgApproval : MED

24

25

HYDRANT EQUIPMENT

HYDRANT COUPLING / JIS TYPESpecificationMaterial : Brass, BronzeLug Size : JIS 40A : 61 mm JIS 50A : 71 mm JIS 65A : 91 mmAvailable Coupling :- Hose Coupling- Coupling w/ Male Thread- Coupling w/ Female Thread- Spanner

HYDRANT COUPLING / STORZ TYPESpecificationMaterial : Brass, BronzeMaterial : Brass, BronzeLug Size : Storz C : 66 mm Storz 65 mm : 81 mm Storz B : 89 mmAvailable Coupling :- Hose Coupling- Coupling w/ Male Thread- Coupling w/ Female Thread- Blanking Cap w/ Chaing p /- Spanner

HYDRANT COUPLING / BS336 TYPESpecificationMaterial : Brass, BronzeAvailable Coupling :- Male Coupling w/ Hose Sleeve- Female Coupling w/ Hose Sleeve- Male Coupling w/ Male Thread- Male Coupling w/ Female Thread- Blanking Cap Female w/ Chain Blanking Cap Female w/ Chain- Blanking Cap Male w/ Chain

26

HYDRANT EQUIPMENT

HYDRANT COUPLING / ANSI TYPESpecificationMaterial : Brass, BronzeSize : 1-1/2" 2" 2-1/2"Available Coupling :- Hose Coupling- Coupling w/ Male Thread- Coupling w/ Female Thread- Spanner

HYDRANT COUPLING / MACHINO TYPESpecificationMaterial : Brass, BronzeMaterial : Brass, BronzeSize : 40A 50A 65AAvailable Coupling :- Hose Coupling- Coupling w/ Male Thread- Coupling w/ Female Thread- Blanking Cap w/ Chaing p /

INTERNATIONAL SHORE CONNECTIONSpecificationConnections come with bolts, nuts, washers and gaskets.The international shore connection is manufacturedaccording to the requirement of IMO "International systemregulation for fire safety" and its working pressure is 0.1Mpa,one side is a flange, other side is a joint that fittingwith fire cock and fire hose of shipping.

Material : Brass, BronzeSize : Outside diam: 178mm Inside diam: 64mm Flange thickness: 14.5mmBolts and nuts: 16mm diam x 50mm length x 4pcsPlease specify the required type of ship's hydrant coupling.

27

HYDRANT EQUIPMENT

HYDRANT VALVE / PRVSpecificationMaterial : Bronze, Nickel Aluminum Bronze, TitaniumSize : 40A / 50A / 65ADesign Pressure : 20 bargBody Test Pressure : 30 barInlet Pressure : 5 bar to 20 barAvailable Coupling :- Hose Coupling- Coupling w/ Male Thread- Coupling w/ Female Thread- Blanking Cap w/ Chain

HYDRANT VALVE /ANGLESpecificationType : Angle TypeType : Angle TypeMaterial : BronzeSize : 40A 50A 65ACapacity : PN16Temperature Range : 0 ~ 120 degreeInlet Flange : To be specified by customerDesign Code : DIN 86211Approval : DNV

HYDRANT VALVE / STRIGHTSpecificationType : Straight TypeMaterial : BronzeSize : 40A 50A 65ACapacity : PN16Temperature Range : 0 ~ 120 degreeInlet Flange : To be specified by customerDesign Code : DIN 86211Design Code : DIN 86211Approval : DNV

28

HYDRANT EQUIPMENT

FIRE HOSE BOXSpecificationMaterial : GRP Hinge, Clip, Bolt/Nut : Stainless SteelSize : W 475 x H 575 x D 200 mmColor : RedWeight : 9.5 kgApproval : KR ( Korean Register of Shipping ) After the completed environment test as dry hest test, salt mist cyclic test, weather resistance test and vibration test, According to IEC60068-2-2:2007, IEC60068-2-52:2007, IEC60068-2-6:2007 and etc.

FOAM HOSE BOXSpecificationMaterial : GRPMaterial : GRP Hinge, Clip, Bolt/Nut : Stainless SteelSize : W 600 x H 850 x D 210 mmColor : RedWeight : 15 kgTest : After the completed environment test as dry hest test, salt mist cyclic test, weather resistance test and vibration test According to IEC60068-2-2:2007, IEC60068-2-52:2007, IEC60068-2-6:2007 and etc.

FOAM HOSE BOX

,

LARGE HOSE BOXSpecificationMaterial : GRP Hinge, Clip, Bolt/Nut : Stainless SteelSize : W 580 x H 560 x D 245 mmColor : RedWeight : 14.5 kgTest : After the completed environment test as dry hest test,

salt mist cyclic test weather resistance test and salt mist cyclic test, weather resistance test and vibration test According to IEC60068-2-2:2007, IEC60068-2-52:2007, IEC60068-2-6:2007 and etc.

29

HYDRANT EQUIPMENT

HOSE REELSpecificationMaterial : Mild SteelColor : RedAvailable Hose Dia. : Max. 64mmAvailable Hose Length : Max. 25mtrWeight : 0.5 kg

SpecificationType : Ridge Hose Reel

HOSE REEL

Type : Ridge Hose ReelWorking Pressure : Max. 12 bar (5-38 deg C)Test Pressure : 18 barFlowrate : Jet - 71L/Min, Spray - 210L/Min @ 6barAvailable Hose Dia. : 19mm, 25mmHose Length : Max. 30mtrDesign Code : EN671-1 : 2001Fire Hose : EN694:2001Drum Plates : Mild Steel - Red Epoxy Powder Coatedp yTotal Weight : Approx. 29kgApproval : MED

HOSE REEL / NORSOKSpecificationType : Ridge Hose Reel according to Norsok RequirementHose Size : 1 ¼ ” x 30mDesign Pressure : 20 barHydrostatic Test Pressure : 30 bar at 5 minFeature:- Outdoor UV Resistance Polyester Powder Coated Hose Reel- High Quality and Pressure Red Semi-Rigid Fire Hose High Quality and Pressure Red Semi Rigid Fire Hose Approved to EN694 : 2001- 3 Way Control Nozzle (Spray-Jet-Off)- Gunmetal 180° Double Swing Waterway- Flexible Mounting Position- For Offshore Application

30

PERSONAL PROTECTION EQUIPMENT

GAS DETECTORSpecificationType : Personal gas detectorWeight : 500gDimensions : 122h x 128w x 57d mmGas Response Time : Typical [sec.] : flamm. 20, Oxygen 10, Toxic 20 Expected SensorExpected life : [year] : Flamm. 5, Oxygen 2, Toxic 3Alarm : Audible : 90dB / 0.3mVisible : Red/ Blue LED aprisVibrating : Internal Vibrating alarmIngress Protection : IP65Approval : MED

GAS DETECTORSpecificationType : Personal gas detector

pp

Type : Personal gas detectorWeight : 270gDimensions : 122h x 72w x 49d mmGas Response Time : Typical[sec.] : flamm. 20, Oxygen 10, Toxic20Expected Sensor Life : [year] : Flamm. 5, Oxygen 2, Toxic 3Alarm : Audible : 95dB Visible : Red/ Blue LED aprisVibrating : Internal Vibrating alarmApproval : MED

STRETCHER

Approval : MED

SpecificationType : Neil-Robertson StretcherMaterial : Fabric : Canvas Slats : Wood Rope : PolypropyleneColor : Off : WhiteSize : 1000 x 1500 mmSafety Load : Horizontal moving & Vertical lifting : 120kgWeight : 8 kg

31

32

PERSONAL PROTECTION EQUIPMENT

STRETCHERSpecificationType : Basket TypeSize : L 2180 mm x W 610 mm x H 190 mmWeight : 11 kgLoad Limits : 144 kgOption : 4-point bridle

RESUSCITATORSpecificationType : ResuscitatorType : ResuscitatorOxygen Cylinder : 2 ltr / 200 barOverall Length : 530 mmWeight : 5.1 kg including MOX-2 cylinderComponents : Bag for resuscitator set Adjustable reducing valve yoke Ventilator w/ mask, reservoir, tubing Head harness Guedel airways set 2 sizes 2,3,4 Extension tube w/ adapter Seal, , / p for PISS valve (Pin Index Safety System) knob manipulator(tool f/ opening PISS valve 5 pcs)

PORTABLE GAS WELDING / NMDSpecificationType : Parable welding and cutting machineWeight : 42.5 kgNote : Suitable for NMD rule requirement

33

34

35

OTHERS

OIL SPILL KITSpecificationThe requirement of OPA'90 is that tankers 400 ft or greaterin length which is carrying oil in bulk shall have equipment tohandle a 12 barrels (1900 ltrs) of deck spill.( ) pTankers under 400 ft must be equipped to deal with 7 barrels(1100 ltrs), while in-land oil barges must be able to deal withat least 1 barrel.

Type : 12 barrel Kit 7 barrel Kit 1 barrel Kit

RECEPTACLESpecificationType : Switch and interlocking typeType : Switch and interlocking typeMaterial : Marine plasticDesign : IEC standardPower Source : 380/440v, 3-pole and earth, 32 AIP Grad : IP 67Weight : 1.1 kgNote : Other power source available on request

PLUGSpecificationType : PlugMaterial : Marine plasticDesign : IEC standardPower Source : 380/440v, 3-pole and earth, 32 AIP glad : IP 67Cable Size : 10 mm ~ 19 mmWeight : 0 25 kgWeight : 0.25 kg

36

PARTNERSHIP

37

38

Memo

About us

History

Company Goal

Navutec has defined three core assets which shall form the basis for all employeesbehavior both internally and externally: Efficiency, Innovation and Responsibility.

• To be flexible in order to adopt changes in technology, market and societyand to be able to solve all kinds of challenges that arise.

COMPANY PROFILE

The main goal is to create profit for future growth and R&Dby taking care of customers, employees, cooperating partners and the interests of societyin general. The economic assets shall be created through profitable and healthy growth.This growth is based on developing solutions which simplify the use and enhances the value ofadvanced technology. Through this will contribute to provide the customers with a freedom ofchoice and a greater number of opportunities.

Navutec designs, produces, assembles, tests, installs and does commissioning onan enormous variety of high quality active firefighting systems for offshore, marine industriesand onshore.

The knowledgeable staff at Navutec is incredibly experienced,with some employees having worked in the active fireprotection industry for over 15 years.

Our Objectives

and to be able to solve all kinds of challenges that arise.

• To be innovative in a constant search of new opportunities for development and growth.

• To be responsible with realistic expectations, deliver as promised and have an active relationship to the society which this company is part of.

• Promoting a positive culture based on improving our HSE performance;• Complying with all legal and regulatory requirements;• Providing training and resources for staff to maintain safe systems of work;• Designing products for world’s best practice to achieve sustainable HSE objectives.• Integrating HSE management into all aspects of the organization;• Employing contractors who aspire to the same HSE standards.

02

Memo

39