NOTICE INVITING e-TENDER

Tender Enquiry No. IISERB/S&P/2020-21/175 Dated: 0 6 / 0 8 / 2 0 2 0

Indian Institute of Science Education and Research (IISER), Bhopal, is an autonomous Institute

established under Ministry of HRD, Government of India. Institute would like to procure Cadence VLSI Software (Cadence Research Bundle 3 Years Term Based License- 10 Users) and for

this purpose e-Tenders are invited from the reputed & bonafide Manufacturers and Authorised Dealers/Distributers. The potential bidders are required to visit the website www.tenderwizard.com/IISERB

for submission of tender.

1. Brief Details of item(s)/ material

Cadence VLSI Software (Cadence Research Bundle 3 Years Term Based License- 10 Users)

The Detailed Technical Specifications of the material to be procured under this tender are given separately in

Annexure – I .

The Bidders are requested to submit single bid tender.

a) Provide complete information in Annexure-II. This part of the tender shall contain company profile

and commercial terms & conditions of contract for the supplies to be made and services to be

rendered.

b) No brochures/leaflets etc. should be submitted in loose form. Please indicate page nos. on your quotation.

c) The Price Bid shall contain rates of the items. The price should be FOR Destination / FOB International Airport (in case of foreign manufacturer) and be quoted indicating the basic price,

discount on basic price, taxes and duties as applicable.

d) In case of any discrepancy in the rates indicated in the Price bid either in figures or words, the rates in words will be considered for evaluation.

e) Format of price bid is enclosed with document and annexed as Annexure-III

4. Contact for information:

a) For any Technical Details:

Dr. Pydi Ganga Mamba Bahubalindruni

Assistant Professor, EECS

Tel. No. +91-755-269 2650

Email: ganga@iiserb.ac.in

b) For any commercial terms and condition:

Stores and Purchase Office,

(IISER) Bhopal , Bhopal by Pass Road,

Bhauri Bhopal-462066 Tel: +91-0755-2692311/312

Email: purchase@iiserb.ac.in

भारतीय विज्ञान शिक्षा एिं अनसुन्धान संस्थान भोऩाऱ Indian Institute of Science Education and Research Bhopal

http://www.tenderwizard.com/IISERBhttp://www.iisc.ernet.in/tender/furniture.htm%23Annexure-Imailto:purchase@iiserb.ac.in

5. Submission of Bids:

1) Bidmustbesubmittedonlythrough e-tendering mode on www.tenderwizard.com/IISERB

(2) Bid submission through any other mode will not be accepted. EXCEPT In case of Foreign Bidders can

submitsealedoffers to Stores& purchaseofficeandwithout EMDbydulyenclosingan undertaking to

this effect on or before the date & time of submission of tender.

Time and Date of Submission: On or before 3.00 PM on 21-08-2020 Time and Date of opening Bid: At 4.00 PM on 21-08-2020

6. Instructions to Bidders:

a) If the bid is submitted by authorized dealer/ distributer for branded makes, a authorization letter from principals clearly indicating that the vendor is the authorized to sell and provide services

for the items mentioned in the scope of supply given in tender documents shall be produced.

b) Purchase Orders if any, for identical equipments supplied to other IISERs/IITs/Central Universities etc. for the preceding three years should be given together with the prices

eventually or finally paid.

c) Copy of CST/VAT/TIN No. and PAN No./GSTIN No. allotted by the concerned authorities should be enclosed.

a) In case of foreign quote, the address of Principal’s / Manufacturer’s and their Banker’s details should be furnished along with certificate.

b) All pages of the tender document shall be invariably signed by the authorized Personnel and Company’s rubber stamp affixed. Photocopies of all certificates shall be self-attested by the

authorized personnel. There shall be no corrections or overwriting in the tender document.

Corrections, if any, should be made clearly and countersigned.

c) The makes/brand and name and address of the manufacturer, Country of Origin, and currency in which rates are quoted are to be clearly mentioned.

7. Other Terms and Conditions

1. IISER,BHOPAL reserves the right to accept orreject any bid in part or full without assigning Any reason whatsoever.The Institute will not hold any responsibility for postal loss or delay of

Any bid.

2. Period of validity of bids: Bids shall be valid for a minimum period of 90 days from the date of opening of the Techno-Commercial Bid.

3. In case your quote is Ex-works basis estimated insurance coverage charges may please be indicated.

4. In case of Foreign Quote, the mode of dispatch should be by Air / Post Parcel. The approximate dimensions of the packages and weight of consignment are to be indicated.

5. In case of INR bids the price quoted should be on F.O.R., IISER Bhopal. Govt. Levies like excise duty, sales tax, octroi, WCT etc., if any, shall be paid at actual rates applicable on the

date of delivery. Rates should be quoted accordingly giving the basic price, Excise Duty, VAT/

Central Sales Tax, levies, octroi etc. Note that all the additional charges must be clearly

mentioned in the quotation. The vendor will have to bear any increase in pricing due to increase

in foreign currency exchange rates. Please note that IISER Bhopal is exempted from payment

of Central Excise duty vide Govt. Notification No.10/97-Central Excise dated 1st March, 1997.

6. Being an Educational and Research Institute IISER, BHOPAL is exempted from payment of Custom

Duty vide Govt. Notification No.51/96-Customs dated 23rd July, 1996. The Institute shall provide

standard exemption certificate on request by the vendor and certificate in any other format may be

issued on specific request solely based on discretion of the Institute. Any other commercial terms &

conditions mentioned by the vendor will not be binding on the Institute in any way unless agreed

specifically beforehand by the Institute in writing.

http://www.tenderwizard.com/IISERB

7. For imported items the agency commission payable to Indian Agent may be indicated. Agency commission will be paid in INR after satisfactory commissioning and acceptance of the item.

8. EMD: EMD for Rs 32,000/-should be in the form of online bank transfer (SBI I-Collect) only. For details logon https://www.onlinesbi.com/prelogin/icollecthome.htm. Except in case of

foreign bidders without having Indian agents may be exempted for EMD by enclosing an

undertaking.Techno- commercial Bids must accompany details of EMD payment. No interest

shall be paid on earnest money deposited. Bidders having valid registration with NSIC/MSMEs

for tendered item and value will be considered for exemption from EMD amount as per extant

rules.

9. In accordance with the Ministry of Finance Office memorandum No F 20/2/2014 PPD (Pt)

dated 25th

July 2016 the institute may relax condition of prior turnover and prior experiences

for Startups and MSMEs subject to meeting of quality and technical specifications on case to

case basis.

10. Beingan Educational and Research Institute IISER, BHOPAL is eligible for concessional GST rates, as

applicable vide Govt. Notification No.45/2017, 47/2017 and 48/2017- Integrated tax rate dated

14/11/2017. The Institute shall provide standard exemption certificate on request by the vendor’.

11. Penalty for delayed supply Time is the essence of the contract and the supplier shall pay or allow the Institute to realize the

sum equivalent to 01(One) per cent of the total order value per week, subject to a maximum

limit of 10% of the order value.

12. Payment term:100 % after delivery delivery and Installation.

13. Jurisdictions The disputes, legal matters, court matters, if any, shall be subject to Bhopal Jurisdiction only.

Stores and Purchase Officer

For and on behalf of Director IISER Bhopal

https://www.onlinesbi.com/prelogin/icollecthome.htm

Annexure I

Technical Specifications of Cadence VLSI Software (Cadence Research Bundle

3 Years Term Based License- 10 Users)

Research Bundle

Description Part Number

Analog and Digital FE and BE: Advanced Tool Set (System Development Suite - SW)

Virtuoso(R) Schematic Editor XL 95115

Virtuoso Multi-mode Simulation with Spectre XPS 90004

Virtuoso(R) Analog Design Environment GXL 95220

Virtuoso(R) Layout Suite GXL 95321

AMS Designer with Flexible Analog Simulation 70020

Virtuoso AMS Designer Verification Option 70030

Incisive Enterprise Simulator - XL 29651

Genus Synthesis Solution GEN100

Innovus Implementation System INVS100

Cadence® Physical Verification System Design Rule Checker XL 96210

Cadence® Physical Verification System Layout vs. Schematic Checker XL 96220

Cadence Quantus QRC Extraction - XL QRCX300

Virtuoso Implementation Aware Design Option 95510

Options with Advanced Tool Set

Circuit Simulation

Virtuoso® RelXpert 33580

Virtuoso Accelerated Parallel Simulator 91050

Virtuoso Multi-mode Simulation Power option 91400

Virtuoso Multi-mode Simulation CPU Accelerator option 91500

Virtuoso(R) Power System XL VPS200

Spectre Extensive Partitioned Simulator 91600

Spectre Characterization Simulator Option 3500

Virtuoso® Analog Oasis Run-Time Option 32100

Cadence(R) OASIS for RFDE 32101

Schematic Interface

Virtuoso(R) Schematic VHDL Interface 21060

Virtuoso(R) Schematic Editor Verilog(R) Interface 21400

Virtuoso(R) Analog HSPICE Interface Option 32760

Synthesis

Genus Low Power Option GEN30

Genus Physical Option GEN40

Genus CPU Accelerator Option GEN80

Stratus HLS XL STR101

Test

MODUS ATPG MOD200

Modus Daignostics MOD300

MODUS DFT Option MOD30

Modus Heirarchical Option MOD60

Modus LBIST Option MOD50

Modus MBIST Option MOD40

Verification Bundle

Enterprise Simulator - XL Interface for MTI 29661

Enterprise Simulator - XL Interface for VCS 29671

Incisive™ Formal Verifier 23560

Incisive™ Enterprise Verifier - XL IEV101

Digital Mixed Signal Option to IES 29710

Encounter™ Low Power Conformal - GXL CFM550

Jasper Formal tech

JasperGold Connectivity Verification APP JGCON100

JasperGold Coverage APP Option JGCOV100

JasperGold Formal Property Verification APP JGFPV100

JasperGold Interactive Option JGINT100

JasperGold Structural Property Synthesis APP JGSPS100

JasperGold X-Propagation Verification APP JGXPR100

JasperGold Automatic Formal Linting App JGAFL100

Extraction

Cadence Quantus QRC Advanced Analysis GXL option QRCX310

Cadence Quantus QRCX Display Technology Option QRCX330

Cadence® Quantus QRC Advanced Node Modeling Option QRCX530

Physical verification

Cadence® QuickView Layout and Mask Data Viewer K2200

Cadence® QuickView Layout Data Viewer K2210

Cadence® QuickView Sign-off Data Analysis Environment K2211

Cadence® Physical Verification System Programmable Electrical Checker XL 96235

Cadence® Physical Verification System Results Manager 96240

Cadence® Physical Verification System Design Analysis Option 96245

Cadence® Physical Verification System QuickView Signoff Environment 96246

Cadence® Physical Verification System Constraint Validator XL 96305

Cadence® Physical Verification System Advanced Device Option 96330

Cadence® Physical Verification System Advanced Analysis Option 96320

Device modelling

Virtuoso Advanced Device Modeling HVMOS (For Eldo) P6191

Virtuoso Advanced Device Modeling HVMOS (For HSPICE) P6192

Pcell Generator PASPCG

Graphical Technology Editor PASGTE

Design for Manufacturing

Litho Physical Analyzer LPA108

Litho Electrical Analyzer LEA108

Signoff Power Analysis

Voltus IC Power Integrity Solution XL VTS200

Voltus IC Power Integrity Solution Advanced Analysis GXL VTS201

Voltus-Fi Custom Power Integrity Solution - XL VTS500

Signoff Timing Analysis

Tempus Timing Signoff Solution XL TPS200

Tempus Timing Signoff Solution TSO TPS300

Tempus Timing Signoff Solution MP TPS400

Characterization

Virtuoso Liberate Server ALT110

Virtuoso Liberate Client ALT111

Virtuoso Variety Server ALT210

Virtuoso Variety Client ALT211

Virtuoso Liberate MX Server ALT410

Virtuoso Liberate MX Client ALT411

Virtuoso Liberate LV Server ALT610

Virtuoso Liberate LV Client ALT611

Digital Implementation

Innovus 20/16/14nm Option INVS20

Innovus Mixed Signal Option INVS30

Innovus DFM Option INVS50

Silicon-Package-Board Products

PCB Design and Layout

Allegro® PCB Librarian - XL PX3500

Allegro(R) Physical Viewer PX3600

Allegro PCB Designer PA3100

Allegro PCB High-Speed Option PA3110

Allegro PCB Miniaturization Option PA3120

Allegro PCB Analog/RF option PA3420

Allegro PCB Routing Option PS3500

Allegro Design Authoring High-Speed Option PA1410

Allegro FPGA system Planner option PA8610

Allegro AMS Simulator PS2200

Allegro AMS Simulator SLPS interface PA2212

Signal Integrity Analysis

Allegro® Sigrity SI base PA5700

Allegro Sigrity PI Base PA5800

Allegro Sigrity Power Aware SI option SIGR915

Power Integrity Sign off and Optimization Option SIGR925

Allegro Sigrity system Serial Link Option SIGR935

Allegro Sigrity Package Assessment and Extraction Option SIGR945

IC Packaging

Cadence SiP Digital Architect - XL SIP110

Cadence® SiP Layout - XL SIP225

Cadence 3D Design Viewer PA6605

[

TECHNO-COMMERCIAL BID

Annexure – II

Cadence VLSI Software (Cadence Research Bundle 3 Years Term Based License- 10 Users) 1. Name of Tendering Company with Registration No. & Date issued

by appropriate authorities (Please enclose copy of certificate of

registration)

2. Do you possess trade license issued by Competent Authorities in India? If so, please enclose a copy.

3. Name of Proprietor / Director

4. Furnish following particulars of the Registered Office a. Complete Postal Address

b. Telephone No.

c. Fax. No.

d. E-Mail Address

5. Furnish following particulars of the Local Branch Office. (if any)

a. Complete Postal Address

b. Telephone No.

c. Fax. No.

d. E-Mail Address

6. PAN No. (Attach Attested Copy)

7. TIN No. (Attach Attested Copy)/GSTIN

8. If Manufacturer – Pl. attach the certificate of Registration

If Authorised Dealer / Distributer – Pl. attach relevant

certificate.

9. Financial turnover for the three financial Years.(Please attach copy of certificate by Chartered Accountant in original )

Financial Year Amount ( ` In Lakhs ) Remarks, if any

2017-2018

2018-2019

2019-2020

(Attach separate sheet if space provided is insufficient)

10. Give details of the major clients – Educational Institutes/Universities, Government Departments, Research Organisations, to whom item/material of same type have been supplied by the bidder during the last five years in the following format.

Sl. Name & address of the Name & Purchase Order/Indent Amount

client with details - quantity of the No. & Date

No Name of the contact items sold

person, telephone no.,

Fax no., e-mail id

1

2

3

4

5

(If the space provided is insufficient, a separate sheet may be attached)

11. The agency should not have been black listed or banned by any Govt. Department, Government Organization, PSU,

University, Autonomous Institute etc.

12. Are you an ISO certified manufacturer? If so, please attach a copy of the certificate.

13. Please specify the minimum time required to supply the item / material from the date of receipt of the Purchase

Order

14. Additional information, if any (Attach separate sheet, if required)

(The Annexure II must be submitted in the given format on the website only)

Date: Signature of Authorized Signatory

Place: Stamp

Annexure – III

PRICE BID

Enquiry No. IISERB/SP/2020-2021/175 dated 06/08/2020

Cadence VLSI Software (Cadence Research Bundle 3 Years Term Based License- 10 Users)

(The price bid needs to be submitted as given format on –tendering website)

Date Signature of the Tenderer

Place Stamp

S. No. Description ot items Qty Currency Rate Total Amount

1. Cadence VLSI Software (Cadence Research Bundle 3 Years Term Based License- 10 Users)

1

(For 10 User)

Total

Discount offered

Discounted Price

GST/TAXES/DUTIES

FOR IISER Bhopal

Net offered Price

Remarks:

Name of the authorized Signatory:

Name of the Company:

Date:

1. Thebasicpriceshouldbe FOR, Institute. / FOB International Airport (in caseof foreign supply) Please indicate basic Note

price, discount offered, Taxes, Duties, separately.

2. Price of Optional items and accessories shall be quoted separately. 3. I/We declare that price quoted is as per the prevailing market price and we have never offered lower than these rates for

evidence for supply of similar items are attached with technical bid.

INSTRUCTION TO SUPPLIERS/BIDDERS:

The tender shall be accepted only through online e-tendering process and all details pertaining

to the tender and guidelines for e-tendering are available on the website

www.tenderwizard.com/IISERB.

Intending contractors needs to register themselves on the e-tendering website

www.tenderwizard.com/IISERB to get the USER ID and PASSWORD by paying required

registration fee (Annual & Non-Refundable) through e-payment only and completing the steps

specified on above referred website.

Special Note: The price bid and other documents has to be Submitted separately online at

www.tenderwizard.com/IISERB. The date of Submission of online Technical and Financial will

be as per tender notice.

Requirement for Vendors:-

P.C. Connected with internet

Registration with portal www.tenderwizard.com/IISERB

Class-III Digital signature certificate in the name of the company of the vendor is mandatory (in the

name of the company who will be submitting the EMD & general information).this may be

obtained by calling our helpdesk ( 09981783170 and 011-49424365).Bids will not be recorded

without Digital signature Certificate.

Bidders will have to pay Tender Processing fee Rs. /- including GST (Non-Refundable)

through e- payment in favour of M/S ITI Ltd.

Note: Please check the Digital Signature Certificate. For more details bidders may visit e-

tendering portal and download the help manuals uploaded in the website.

Contact Person:-

Mr. Ranjit Kumar Ranjan

Mob: 09981783170

Email: twhelpdesk674@gmail.com

Mr. Raviraj Yadav

Mob: 7471123444

Email:twhelpdesk673@gmail.com

Help Desk No: 011-49424365

http://www.tenderwizard.com/IISERBhttp://www.tenderwizard.com/IISERBhttp://www.tenderwizard.com/IISERBhttp://www.tenderwizard.com/IISERBmailto:twhelpdesk674@gmail.com