Upload
abolfazl-mazloomi
View
146
Download
19
Embed Size (px)
DESCRIPTION
Airbus A380 Technical Training Manual (TTM)Full DocumentNew VersionThe first A380 technical manual, the "Airplane Characteristics for Airport Planning," was released this month. It can be consulted and/or downloaded from the A380 Family page on Airbus' web site at www.airbus.com. This is the first time a technical manual of this nature has been made available so early, some three years before the first flight of the aircraft.The Airplane Characteristics manual provides specific A380 data needed by airport authorities and planners to support the operation of the A380 within their airports. Data such as airplane dimensions, take off and landing distances, terminal operations data, taxiing, parking and pavement loading requirements are provided for the A380-800 and A380-800F, the passenger and freighter versions of the A380.Airbus has been working with planning teams from 50 major airports in five continents to ensure smooth handling of the A380 when it enters service in 2006 and the Airplane Characteristics manual is a major support for this.Following release of this first manual and up to entry into service of the A380, Airbus will deliver a full range of technical data for the maintenance, engineering, material support and flight operations departments of A380 airline customers. Technical data for the A380 will be available in electronic format according to the most recent aviation industry standards, which are more efficient and user friendly. They will be accessible through Airbus On Line Services, the Airbus portal for Customer Support.
Citation preview
A380TECHNICAL TRAINING MANUAL
MAINTENANCE COURSE - T1 & T2 (RR / Metric)LEVEL III - ATA 50 Cargo & Accessory Compartments
This document must be used for training purposes only
Under no circumstances should this document be used as a reference
It will not be updated.
All rights reservedNo part of this manual may be reproduced in any form,
by photostat, microfilm, retrieval system, or any other means,without the prior written permission of AIRBUS S.A.S.
LEVEL III - ATA 50 CARGO & ACCESSORY COMPARTMENTSCargo Loading System Description (3) . . . . . . . . . . . . . . . . . . . . . . . . 2Cargo Loading System Maintenance (3) . . . . . . . . . . . . . . . . . . . . . . 16
MAINTENANCE COURSE - T1 & T2 (RR / Metric)LEVEL III - ATA 50 Cargo & Accessory Compartments
TABLE OF CONTENTS Mar 21, 2006Page 1
A380 TECHNICAL TRAINING MANUALL0
Y06
082
- L0D
T0T0
CARGO LOADING SYSTEM DESCRIPTION (3)Proximity Switches
Proximity Switch - Door Sill LatchThe Door Sill Latches (DSLs) are connected in series. All YZ-doorsill latches have to be in the "down" position to let the power supplythe Cargo Loading System (CLS). Then the cargo compartment doormechanism will be electrically isolated.All YZ-door sill latches have to be in the "up" position to let the powersupply the main CC door opening/closing operation. Then the CLSwill be electrically isolated. As the Door Sill Latches are connectedin series, if at least one of them differs from the other ones, both CLSand cargo door will be electrically isolated.
MAINTENANCE COURSE - T1 & T2 (RR / Metric)LEVEL III - ATA 50 Cargo & Accessory Compartments
CARGO LOADING SYSTEM DESCRIPTION (3) Mar 17, 2006Page 2
A380 TECHNICAL TRAINING MANUALL0
Y06
082
- L0D
T0T0
- LM
50D
1CLS
0000
01
PROXIMITY SWITCHES - PROXIMITY SWITCH - DOOR SILL LATCH
MAINTENANCE COURSE - T1 & T2 (RR / Metric)LEVEL III - ATA 50 Cargo & Accessory Compartments
CARGO LOADING SYSTEM DESCRIPTION (3) Mar 17, 2006Page 3
A380 TECHNICAL TRAINING MANUALL0
Y06
082
- L0D
T0T0
- LM
50D
1CLS
0000
01
PROXIMITY SWITCHES - PROXIMITY SWITCH - DOOR SILL LATCH
MAINTENANCE COURSE - T1 & T2 (RR / Metric)LEVEL III - ATA 50 Cargo & Accessory Compartments
CARGO LOADING SYSTEM DESCRIPTION (3) Mar 17, 2006Page 4
A380 TECHNICAL TRAINING MANUALL0
Y06
082
- L0D
T0T0
- LM
50D
1CLS
0000
01
This Page Intentionally Left Blank
MAINTENANCE COURSE - T1 & T2 (RR / Metric)LEVEL III - ATA 50 Cargo & Accessory Compartments
CARGO LOADING SYSTEM DESCRIPTION (3) Mar 17, 2006Page 5
A380 TECHNICAL TRAINING MANUALL0
Y06
082
- L0D
T0T0
- LM
50D
1CLS
0000
01
CARGO LOADING SYSTEM DESCRIPTION (3)Proximity Switches (continued)
Proximity Switches - ConveyanceThe proximity switches - conveyance indicate if the latch is in thelifted or lowered position. If the latch is lifted, the proximity switchwill signal the relevant control boxes: Compartment Control Box(CCB) or Sector Control Box (SCB), to cut the power supply tospecific Power Drive Units (PDUs) where Unit Load Device (ULD)transportation movements are no longer required.
MAINTENANCE COURSE - T1 & T2 (RR / Metric)LEVEL III - ATA 50 Cargo & Accessory Compartments
CARGO LOADING SYSTEM DESCRIPTION (3) Mar 17, 2006Page 6
A380 TECHNICAL TRAINING MANUALL0
Y06
082
- L0D
T0T0
- LM
50D
1CLS
0000
01
PROXIMITY SWITCHES - PROXIMITY SWITCHES - CONVEYANCE
MAINTENANCE COURSE - T1 & T2 (RR / Metric)LEVEL III - ATA 50 Cargo & Accessory Compartments
CARGO LOADING SYSTEM DESCRIPTION (3) Mar 17, 2006Page 7
A380 TECHNICAL TRAINING MANUALL0
Y06
082
- L0D
T0T0
- LM
50D
1CLS
0000
01
CARGO LOADING SYSTEM DESCRIPTION (3)Door-area Control Box (DCB) InterfacesThe DCB is linked with the other control boxes and the Doors and SlidesManagement Control Unit (DSMCU) via CAN bus. The DCB receivesfeedback from the door sill latch proximity switches via a discrete signaland sends a signal to the Outside Control Panel (OCP) via an analogsignal. The DCB has also a link with the Central Maintenance System(CMS) via a bi-directional ARINC 429 link with the SecuredCommunication Interfaces (SCIs).
MAINTENANCE COURSE - T1 & T2 (RR / Metric)LEVEL III - ATA 50 Cargo & Accessory Compartments
CARGO LOADING SYSTEM DESCRIPTION (3) Mar 17, 2006Page 8
A380 TECHNICAL TRAINING MANUALL0
Y06
082
- L0D
T0T0
- LM
50D
1CLS
0000
01
DOOR-AREA CONTROL BOX (DCB) INTERFACES
MAINTENANCE COURSE - T1 & T2 (RR / Metric)LEVEL III - ATA 50 Cargo & Accessory Compartments
CARGO LOADING SYSTEM DESCRIPTION (3) Mar 17, 2006Page 9
A380 TECHNICAL TRAINING MANUALL0
Y06
082
- L0D
T0T0
- LM
50D
1CLS
0000
01
CARGO LOADING SYSTEM DESCRIPTION (3)Compartment Control Box (CCB) InterfacesThe Compartment Control Box (CCB) is linked with the other controlboxes via CAN bus. The CCB receives discrete signals from the InsideControl Panel (ICP) and the OCP. Analog data is exchanged with theOCP. The CCB receives feedback from the ball-mat area proximityswitches via a discrete signal and sends discrete commands to thetransverse PDUs.
MAINTENANCE COURSE - T1 & T2 (RR / Metric)LEVEL III - ATA 50 Cargo & Accessory Compartments
CARGO LOADING SYSTEM DESCRIPTION (3) Mar 17, 2006Page 10
A380 TECHNICAL TRAINING MANUALL0
Y06
082
- L0D
T0T0
- LM
50D
1CLS
0000
01
COMPARTMENT CONTROL BOX (CCB) INTERFACES
MAINTENANCE COURSE - T1 & T2 (RR / Metric)LEVEL III - ATA 50 Cargo & Accessory Compartments
CARGO LOADING SYSTEM DESCRIPTION (3) Mar 17, 2006Page 11
A380 TECHNICAL TRAINING MANUALL0
Y06
082
- L0D
T0T0
- LM
50D
1CLS
0000
01
CARGO LOADING SYSTEM DESCRIPTION (3)Sector Control Box (SCB) InterfacesThe SCBs are linked with the other control boxes via a CAN bus. TheSCBs receive discrete signals from the proximity switches and senddiscrete commands to the PDUs.
MAINTENANCE COURSE - T1 & T2 (RR / Metric)LEVEL III - ATA 50 Cargo & Accessory Compartments
CARGO LOADING SYSTEM DESCRIPTION (3) Mar 17, 2006Page 12
A380 TECHNICAL TRAINING MANUALL0
Y06
082
- L0D
T0T0
- LM
50D
1CLS
0000
01
SECTOR CONTROL BOX (SCB) INTERFACES
MAINTENANCE COURSE - T1 & T2 (RR / Metric)LEVEL III - ATA 50 Cargo & Accessory Compartments
CARGO LOADING SYSTEM DESCRIPTION (3) Mar 17, 2006Page 13
A380 TECHNICAL TRAINING MANUALL0
Y06
082
- L0D
T0T0
- LM
50D
1CLS
0000
01
CARGO LOADING SYSTEM DESCRIPTION (3)Electrically Powered Pallet Turning and Extended T-ShapeCLS in AFT CC
This option is used for the loading of three additional pallets (88 in / 96in x 125.0 in lengthwise position in T-shape area) in the AFT cargocompartment. These pallets will be turned in the ball mat area. Additionalcomponents will be installed in the T-shape area of the cargocompartment. The Pallet Turning Unit (PTU) is basically the same as theSCB and additionally monitors the pallet turning function. It is integratedin the floor panels and replaces one SCB.
MAINTENANCE COURSE - T1 & T2 (RR / Metric)LEVEL III - ATA 50 Cargo & Accessory Compartments
CARGO LOADING SYSTEM DESCRIPTION (3) Mar 17, 2006Page 14
A380 TECHNICAL TRAINING MANUALL0
Y06
082
- L0D
T0T0
- LM
50D
1CLS
0000
01
ELECTRICALLY POWERED PALLET TURNING AND EXTENDED T-SHAPE CLS IN AFT CC
MAINTENANCE COURSE - T1 & T2 (RR / Metric)LEVEL III - ATA 50 Cargo & Accessory Compartments
CARGO LOADING SYSTEM DESCRIPTION (3) Mar 17, 2006Page 15
A380 TECHNICAL TRAINING MANUALL0
Y06
082
- L0D
T0T0
- LM
50D
1CLS
0000
01
CARGO LOADING SYSTEM MAINTENANCE (3)Tests
Text of step 1 of topic page 1
OMS Interactive Tests OverviewThe Cargo Loading System provides the following interactive tests:- FWD BITE memory dump,- AFT BITE memory dump.These tests are launched from the OMS HMI (using the OMT, OITor PMAT).
MAINTENANCE COURSE - T1 & T2 (RR / Metric)LEVEL III - ATA 50 Cargo & Accessory Compartments
CARGO LOADING SYSTEM MAINTENANCE (3) Mar 17, 2006Page 16
A380 TECHNICAL TRAINING MANUALL0
Y06
082
- L0D
T0T0
- LM
50Y
1MA
INT0
001
TESTS - OMS INTERACTIVE TESTS OVERVIEW
MAINTENANCE COURSE - T1 & T2 (RR / Metric)LEVEL III - ATA 50 Cargo & Accessory Compartments
CARGO LOADING SYSTEM MAINTENANCE (3) Mar 17, 2006Page 17
A380 TECHNICAL TRAINING MANUALL0
Y06
082
- L0D
T0T0
- LM
50Y
1MA
INT0
001
AIRBUS S.A.S.31707 BLAGNAC cedex, FRANCE
STMREFERENCE L0Y06082
MARCH 2006PRINTED IN FRANCEAIRBUS S.A.S. 2006
ALL RIGHTS RESERVED
AN EADS JOINT COMPANYWITH BAE SYSTEMS
Table of ContentsCargo Loading System Description (3)Proximity SwitchesProximity Switch - Door Sill LatchProximity Switches - Conveyance
Door-area Control Box (DCB) InterfacesCompartment Control Box (CCB) InterfacesSector Control Box (SCB) InterfacesElectrically Powered Pallet Turning and Extended T-Shape CLS in AFT CC
Cargo Loading System Maintenance (3)TestsOMS Interactive Tests Overview