FORESTRY TOOLS

A registered trademark of SNA Europe Group

Our Forestry assortment includes traditional forestry tools as well as new products. Some of the products are Bahco branded, but most of the products carry our special forestry brand, EIA (Edsbyns Industri Aktiebolag). The production of Forestry hand tools has a long - more than 80 years in fact - tradition within EIA. With innovative products and a quality second to none, the tools have become the first choice for forestry workers all over the world. The assortment is adapted to manual forestry work and wood handling, including breaking bars, logging hooks and tongs, wedges, planting tools, measuring tapes, brush and grass cutting blades, accessories like belts and holsters and protective clothing. Due to the in-house plastic production, utilized on these hand tools, EIA has the process control and can take full responsibility for the complete product. Within our Forestry assortment we also offer Bahco chain saw files, axes, saws, as well as practical and protective clothing and storage.

A registered trademark of SNA Europe Group

3

INDEXChain Saw Files........................................................................................................................................5

Wedges ....................................................................................................................................................7

Axes..........................................................................................................................................................8

Saws & Knifes ........................................................................................................................................ 11

Bowsaws ................................................................................................................................................12

Logging Tools .........................................................................................................................................14

Measuring Tools .....................................................................................................................................23

Clearing Tools .........................................................................................................................................26

Planting Tools .........................................................................................................................................28

Holsters ..................................................................................................................................................29

Storage ...................................................................................................................................................32

Protective Clothing .................................................................................................................................33

Debarking Tools ......................................................................................................................................39

Clearing Blades ......................................................................................................................................41

4

CHAIN SAW FILES

.Round chain saw file for sharpening of the cutting tooth on the saw chainEach file is packed in a skin pack which can be reused as a protective sleeve

731151mm

Ømm

168-6-3.2-1P 8152338 12 150 3.2 1/4” 13

168-6-3.5-1P 8152345 12 150 3.5 1/4” 15

168-8-4.0-1P 8152352 12 200 4.0 3/8” RG 23

168-8-4.5-1P 8152369 12 200 4.5 .325 27

168-8-4.8-1P 8152376 12 200 4.8 .325 31

168-8-5.2-1P 8152383 12 200 5.2 3/8” 36

168-8-5.5-1P 8152390 12 200 5.5 3/8” 39

168-8-6.3-1P 8152406 12 200 6.3 1/2” 51

Round chain saw files168 - 1P

.Round chain saw file for sharpening of the cutting tooth on the saw chainThe files are packed in a three pce protective skin pack with perforations for easy separation12 three packs (36 files) are packed in a combined display/storage box

Round chain saw files

731151mm

Ømm

168-6-3.2-3P 8152413 12 150 3.2 1/4” 39

168-6-3.5-3P 8152420 12 150 3.5 1/4” 45

168-8-4.0-3P 8152437 12 200 4.0 3/8” RG 69

168-8-4.5-3P 8152444 12 200 4.5 .325 81

168-8-4.8-3P 8152451 12 200 4.8 .325 93

168-8-5.2-3P 8152468 12 200 5.2 3/8” 108

168-8-5.5-3P 8152475 12 200 5.5 3/8” 117

168-8-6.3-3P 8152482 12 200 6.3 1/2” 153

168 - 3P

.Round chain saw file for sharpening of the cutting tooth on the chain saw blade6 packFor professional usersThe outer box can also be used as a counter display10 six packs (60 files) are packed in a combined display/storage box

Round chain saw files

731151mm

Ømm

168-8-4.0-6 8217419 6 200 4.0 3/8” RG 23

168-8-4.5-6 8217426 6 200 4.5 .325 27

168-8-4.8-6 8217433 6 200 4.8 .325 31

168-8-5.2-6 8217440 6 200 5.2 3/8” 36

168-8-5.5-6 8217457 6 200 5.5 3/8” 39

168-6

5

CHAIN SAW FILES

.File handle developed according to the scientific ERGO™ processParallel flat file with round uncut edges for filing of depth gauges on saw chains and for sharpening of brushcutter blade

Flat chain saw files Single pack, carded166-2

731151

Amm

Bmm

Cmm

166-6-16-2.5-2 8209698 5 150 16.0 2.5 105

.Parallel flat file with round uncut edgesFor filing of depth gauges on saw chains and for sharpening of brush cutter blades

Flat chain saw files In-dustry pack, unhandled

166/167-12731151

Amm

Bmm

Cmm

167-8-21-3.2-12 8021986 12 200 21.0 3.2 94

166-6-16-2.5-12 8021979 12 150 16.0 2.5 48

.File handle developed according to the scientific ERGO™ processCombination pack with two round chain saws files and one 6” flat chain saw file Chain saw files, set

168-C

731151mm

Ømm

168-COMBI-4.0 8209667 1 200 4.0 3/8” RG 150

168-COMBI-4.8 8209674 1 200 4.8 .325 160

168-COMBI-5.5 8209681 1 200 5.5 3/8” 175

6

CHAIN SAW FILES

.File handle developed according to the scientific ERGO™ processCombination pack of two round chain saws files, one 6” flat chain saw file and a filing guide Chain saw files, set

including filing guide168-C-G731151

mm

Ømm

168-COMBI-4.0-6922 8209612 1 200 4.0 3/8” RG 185

168-COMBI-4.8-6920 8209643 1 200 4.8 .325 195

168-COMBI-5.5-6924 8209650 1 200 5.5 3/8” 210

.

File handle developed according to the scientific ERGO™ processThis handle can hold both round chain saw files (type 168) and the flat chain saw file (type 166)

Handle for round and flat chain saw files Pack of 10 loose handles9-486-C-10

731151

9-486-C-10 8209599 10 45

.

File handle developed according to the scientific ERGO™ processThis handle can hold both round chain saw files (type 168) and the flat chain saw file (type 166)

Handle for round and flat chain saw files Single pack carded9-486-C-1P731151

9-486-C-1P 8209605 10 50

.

Handle for 8” round chain saw files with three integrated angle guides Handle for round chain saw files

PH-6604731151

PH-6604-1P 8152819 15 55

PH-6604-25 8141134 25 50

3D filing guide for chain saw chains. Due to its unique construction the guide controls all 3 dimensions. Bevel

,

vertical angle and depth. Time saving, as the filing guide, without any tools, is mounted on the chain, still onthe guide bar.Includes integrated chrome plated guide for filing of the depth guage with a flat file.

Ø

6920 7311518298241 325 30

6921 7311518329563 325 30

6922 73115183295701 3/8" 30

6924 7311518329587 1

1

3/8" 30

6925 7311518329594 1

1

3/8" 30

6926 7311518329600 1

1

.404 30

Sharpening tools6920 - 6926

5/32”

3/16”

7/32”

3/16”

7/32”

7/32”

7

12 cm Polyamide wedge, grooved on one side for a non-slip function.

6300 7311518119072 1 120 70

Wedge6300

12 cm aluminium wedge. Grooved on one side for a non-slip function.

6304 7311518119096 1 130 180

6304

24 cm felling wedge of durable special plastic. The wedge to use, with 1002 breaking bar for the best tree-fellingmethod.

6310 7311518119195 1 240 410

6310

WEDGES

8

AXES

.For general purpose applications such as camping or gardening work and occasional branch trimming High-quality tool steel according to DIN 7287, class BCurved ash wood handle, according to DIN 5132, form BHandle secured by a jagged carbon-fibre wedge equipped with a euro suspension hole Additional 8 mm (European standard) suspension hole in the handle for easy storageAlso available with fully polished axe head for an easier cut and a non-slip soft grip for comfort

Camping axesHUS

HUS-0.7-500SG

HUS-0.8-500

731151

mm

HUS-0.6-380 8123659 4 380 850

HUS-0.7-500SG 8281229 4 500 1030

HUS-0.8-500 8123666 4 500 1150

.

For occasional use by home owners, very much an all-round general purpose axe Thin wide blade for a clean cut Curved ash wood handle, secured by a jagged carbon-fibre wedge Equipped with a euro hole in addition to an 8 mm (European standard) suspension hole in the handle for easy storage

Camping axesHGPS

731151

mm

HGPS-0.6-360 8123680 4 360 800

HGPS-0.8-380 8123697 4 380 1000

HGPS-1.0-400 8123703 4 400 1250

.

Short general purpose axe for lighter applications Backside of the axe head can also be used as hammer Straight 3-component handle with non-slip grip (polypropylene handle with elastomer grip and fibreglass core) for comfort

Camping axesHFGPS

731151

mm

HFGPS-0,7-400FG 8275877 4 380 1070

.

For branch trimming and general purpose gardening work High-quality tool steel according to DIN 7287, class B Curved ash wood handle, according to DIN 5132, form B, secured by a jagged carbon-fibre wedge equipped with a euro suspension hole Additonal 8 mm (European standard) suspension hole in the handle for easy storageAlso available with fully polished axe head for an easier cut and a non-slip soft grip for more comfort

HatchetsHUS

731151

mm

HUS-1.0-650 8123673 4 650 1400

HUS-1.0-650SG 8281236 4 650 1350

HUS-1.0-650

HUS-1.0-650SG

9

AXES

.For branch trimming and felling small trees Slightly wider at the eye, the thin, wide blade ensures a clean and easy cut into the branch High-quality tool steel according to DIN 17200, carbon 45 Curved ash wood handle, secured by a jagged carbon-fibre wedge equipped with a euro suspension hole for easy storageAdditional 8 mm (European standard) suspension hole in the handle for easy storage

HatchetsFGS

731151

mm

FGS-1.0-600 8123796 4 600 1500

FGS-1.25-700 8123802 4 700 1800

.

For felling trees and branch trimming Slightly wider at the eye, the thin, wide blade ensures a clean and easy cut into the branch High-quality tool steel according to DIN 17200, carbon 45 Curved ash wood handle, secured by a jagged carbon-fibre wedge equipped with a euro suspension hole Additional 8 mm (European standard) suspension hole in the handle for easy storage

Felling axesFGS

731151

mm

FGS-1.6-810 8123819 4 800 2200

FGS-1.8-810 8123826 4 800 2400

Felling axes

.

For felling trees and also for cutting off branches from felled trees Thin blade makes it swing smoothly through the branch High-quality hardened tool steel according to DIN 7287, class B Surface fine-polished in full First-grade hickory handle, secured with a jagged carbon-fibre wedge and an additional metal ring-wedge Wedge equipped with a euro suspension hole Handle has an 8 mm (European standard) suspension hole for easy storage

FCP

731151

mm

FCP-1.8-810 8123970 4 800 2400

FCP-2.3-860 8123994 2 850 3000

.

For felling trees and also for cutting off branches from felled trees Fully polished axe head and thin blade cuts smoothly through the branch High-quality tool steel according to DIN 7287, class B Curved ash wood handle, according to DIN 7295, form B, secured by a jagged carbon-fibre wedge which is fixed by an additional metal ring-wedge and equipped with a euro suspension hole for easy storageHandle equipped with a non-slip soft grip for comfort and security

Felling axesFCS

731151

mm

FCS-2.0-900SG 8281243 2 900 2530

10

AXES

.

.Flare-headed felling axe with long, straight handle, which enables a long swing and a deep cut3-component handle (fibreglass core, polypropylene around the core and elastomer grip) for comfortComfortable, soft non-slip grip offers with large suspension hole for easy storage

Felling axesFFSS

731151

mm

FFSS-1.5-900FG 8275884 4 900 2400

Traditional axe handles made of selected ash wood of high quality Professional handles made of a very resistant 3-component fibreglass material for comfort Each wooden spare handle is supplied with a plastic wedge for fixation of the handle in the axe-head Advice:

Remove the old handle, clean out the eye of the head and fix the new handle into the eye Drive the plastic wedge into the handle using a hammer until it has reached the same level as the head itself For details see instruction card attached to each ash wood handle

Spare handles axesSH

.

731151

mm

SH-FCS-810 8140540 1 800 450SH-FCS-860 8140557 1 850 500SH-FGS-600 8140649 1 600 400SH-FGS-700 8140656 1 700 450SH-FGS-800 8140663 1 800 500SH-HFGPS-400FG 8282301 1 400 250SH-HGPS-400 8207618 1 400 200SH-MES-F-900 8141554 1 900 500SH-HGPS-360 8140618 1 360 150SH-HGPS-380 8140625 1 380 180SH-HUS-380 8140502 1 380 190SH-HUS-500 8140519 1 500 250SH-HUS-650 8140526 1 650 400SH-MES-900 8140601 1 900 550SH-MES-900FG 8282318 1 900 1000SH-SUS-800 8140809 1 800 500SH-MCS-800 8140595 1 800 500SH-PAGS-900FG 8326944 1 920 1030

11

SAWS AND KNIVES

.General-purpose folding saw for cutting both green and dry wood, plastic, bone etc Specially designed for wildlife enthusiasts, hunters and campers XT hardpoint toothing, 7 TPI. Blade specially coated for rust protection and low friction 2-component plastic handle for perfect grip, with leather strap. Safety lock, locked also when folded

Folding saw396-LAP

731151

Amm

Bmm

Cmm

396-LAP 8172367 10 190 230 405 189

396-BLADE 8299057 1 190 – – 44

.

Robust knife with a solid stainless steel blade for multipurpose use 2-component handle for comfort in use and a safe grip Overall product length 220 mm, blade length 100 mm Supplied with a practical sheath for belt carrying Packaging: retail hanging card

Laplander knife SB-2446-LAP

731151

Amm

Bmm

SB-2446-LAP 314150222353 10 220 100 128

.

Foldable saw (396-LAP) + knife (2446-LAP)

LAP-KNIFE 731151

Amm

Bmm

LAP-KNIFE 7311518216443 10 220 100 317

Folding saw + Knife

12

BOWSAWS

.Bowsaw frame developed according to the scientific ERGO™ process ERGO™ handle with knuckle protector gives ergonomic comfort and safety Heavy duty bowsaw Made from high-quality steel and protected from rust and corrosion by a coating of high-impact enamel

paint Designed for demanding applications and tough environments as construction sites Lightweight tubing, 24” - 750 g, for easy handling Innovative tensioning mechanism for high blade tension (up to 120 kp) and straight cutting Better and stronger blade fitting for easy and safe blade change

Ergo™ Bowsaws10

.Professional bowsaw for all types of work, especially in building, gardening, farming and forestry applicationsComplete saw with a peg toothed blade, type 51, for cutting dry woodPowder painted steel tube for excellent rust protectionTeeth points high-frequency, heat-induction hardened for long lasting performanceThe knuckle protector gives comfort and safetySE-16-21 with pointed nose for better access in tight areas23 raker toothed blade for pruning and gardening (wet wood)

BowsawsSE-15/-16

SE-15

SE-16-21

731151 mm

SE-16-21 8029807 5 530 21 51 570

SE-16-21-23 8273934 5 530 21 23 570

SE-15-24 8029838 5 610 24 51 675

SE-15-30 8029821 5 760 30 51 800

SE-15-30-23 8029845 5 760 30 23 800

SE-15-32 8249168 5 810 32 51 840

SE-15-36 8141202 5 910 36 51 920

SE-15-36-23 8258276 5 910 36 23 920

731151 mm

10-21-51 8229344 5 530 21 51 680

10-24-23 8229368 5 604 24 23 743

10-24-51 8229351 5 604 24 51 743

10-30-23 8229382 5 760 30 23 865

10-30-51 8229375 5 760 30 51 865

13

BOWSAWS

.

.

For cutting dry, seasoned wood, as well as for cross-cutting fresh, green woodPeg toothingHardened and tempered high-quality steelTooth points high-frequency, heat-induction hardened for long lasting performanceRust-prevention treated and packed in individual sleeve printed with graphically illustrated text for correct blade selection

Suitable for sawing in green wood Raker toothing Hardened and tempered high-quality steel Tooth points high-frequency, heat-induction hardened for long lasting performance Rust-prevention treated and packed in individual sleeve printed with graphically illustrated text for correct blade selection

Bowsaw blades

Bowsaw blades

51

23

731151

Lmm

51-12 8044565 10 320 30

51-21 8003906 10 530 50

51-24 8003913 10 607 65

51-30 8003920 10 759 80

51-32 8003937 10 810 90

51-36 8003944 10 912 100

731151

Lmm

23-15 8274665 10 380 33

23-21 8012274 10 530 45

23-24 8003852 10 607 60

23-30 8003869 10 759 75

23-32 8003876 10 810 85

14

Short, lightweight, tubular steel bar.Comfortable and warm direct-on moulded thermoplastic rubber handle.

1000 7311518106744 1 430 700

Breaking bar1000

Steel body with comfortable and warm direct-on moulded thermoplastic rubber handle.

1002 7311518106751 1 530 1000

1002

Fully hardened breaking bar of standard length, lightweight, tubular steel with holder for cant hook.Comfortable and warm direct-on moulded thermoplastic rubber handle.

1010 73115181067681 800 1450

1010

LOGGING TOOLS

Fully hardened breaking bar with hammer heel to be used in a combination with felling wedges

1

15

Fully hardened breaking bar of standard length, lightweight, tubular steel bar equipped with sliding canthook.Comfortable and warm direct-on moulded thermoplastic rubber handle.

1014 7311518106775 1 800 1800

1014

1022Fully hardened heavy duty forged steel bar with sliding cant hook.Comfortable and warm direct-on moulded thermoplastic rubber handle.

1022 7311518106799 1 800 2400

1030Fully hardened heavy duty forged steel bar, tubular steel extension with sliding cant hook.Comfortable and warm direct-on moulded thermoplastic rubber handle.

1030 7311518106812 1 1300 3400

LOGGING TOOLS

16

tSpare par1029

Canthook clamp for 1022, 1030

1029 7311518106805 1 200

Cant hook for 1014, 1022, 1030

1039 7311518106829 1 300

1039

Fully hardened solid forged steel hook with thermoplastic rubber handle.

1204 7311518106997 1 400

Lifting hook1204

LOGGING TOOLS

17

Fully hardened solid forged steel hook. Plastic handle complete with holder for marking pen 11 mm.

1206 7311518107000 1 500

1206

1210Fully hardened solid forged steel lifting hook with transverse handle.

1210 7311518107017 1 500

Lifting tongs1401Fully hardened solid steel lifting tongs with direct-on molded thermoplastic rubber handle.

Set shanks with ground tips. Jaw opening 2 - 19 cm

1401 7311518107208 1 450

LOGGING TOOLS

18

1406Solid, fully hardened steel lifting tongs. Extended 34 cm for lifting and pulling logs in an upright position.Set shanks with ground tips. Direct-on molded thermoplastic rubber handle.Jaw opening 2 - 19 cm

1406 7311518328368 1 610 700

Fully hardened solid steel lifting tongs with direct-on molded thermoplastic rubber handle. One shank equippedwith non-slip plastic grip for rolling.Set shanks with ground tips. Jaw opening 2 - 19 cm

1408 7311518107215 1 450

1408

Fully hardened solid steel lifting tongs with direct-on molded thermoplastic rubber handle.Set shanks with ground tips. Jaw opening 6 - 29 cm

1423 7311518169787 1 900

1423

Fully hardened solid steel lifting tongs with direct-on molded thermoplastic rubber handle. Extended for liftingand pulling logs in an upright position.Set shanks with ground tips. Jaw opening 6 - 29 cm

1426 7311518298890 1 1200

1426

LOGGING TOOLS

19

Tractor tongs1432

Heavy duty lifting truck tong, fully hardened steel.Loop for lifting and handle for releasing.Set shanks with ground tips. Jaw opening 6 - 55 cmCE-certified for lifting capacity 1500 kg / 3300 lbs1460 spare spring.

1432 7311518107253 1

1

4600

1460 7311518107314

1434Heavy duty lifting truck tong, fully hardened steel.Loop for lifting and handle for releasing.Set shanks with ground tips. Jaw opening 8 - 70 cmCE-certified lifting capacity 1500 kg / 3300 lbs1460 spare spring.

1434 7311518107260 1 7300

1460 7311518107314 1

1440Heavy duty lifting truck tong, fully hardened steel.Hook with locking ring for lifting.Set shanks with ground tips. Jaw opening 6 - 52 cmCE-certified lifting capacity 1000 kg / 2200 lbs1460 spare spring.

1440 7311518107277 1

1

4900

1460 7311518107314

LOGGING TOOLS

20

20

20

20

1449Heavy duty lifting truck tong, fully hardened steel.Loop for lifting.Set shanks with ground tips. Jaw opening 6 - 42 cmCE-certified lifting capacity 1500 kg / 3300 lbs1460 spare spring.

1449 7311518107284 1 3500

1460 7311518107314 1

Stirdy lifting truck tong, fully hardened steel. Suitable for use with 4-wheel tractors (ATV).Loop for lifting and spring for clamping.Set shanks with ground tips. Jaw opening 3 - 42 cmCE-certified lifting capacity 800 kg / 1800 lbs

1450 7311518248819 1 1100

1450

Heavy duty skidding tong, fully hardened steel.Set shanks with ground tips. Jaw opening 0 - 42 cmCE-certified capacity 1000 kg / 2200 lbs

1451 7311518107307 1 5000

Skidding tongs1451

LOGGING TOOLS

20

21

Solid forged steel lever, complete with chain and hooks. To be used in combination with chains when fasteningand tightening. Length given is excluding chains and hooks.

8000-8 7311518119447 1 295 540

8000-10 7311518119409 1 365 775

8000-12 73115181194161 415 900

8000-15 7311518119423 1

1

Tension lever8000-8 -10 -12 -15

sChain accessorie8100

Closed steel hook for tension lever. Intended for chain size 5/16" and 3/8" diameter.mm

8100-5-16 7311518119478

8100-3-8 7311518119461

75

8110Open hook for tension lever. All steel. Intended for chain size 1/4" and 5/16" dia.mm

8110-1-4 7311518119508

8110-5-16 7311518119522

LOGGING TOOLS

1

1

515 1800

6

8 175

1

1

5

6

25

50

22

8250Patent hook with locking device. All steel.8259 = Spare spring

8250 7311518119577

8259 7311518119584

Link lock/chain joiner. All steel, galvanized.mm

8300-1-4 7311518119614 40

8300-5-16 7311518119652 100

8300-3-8 7311518119645 195

8300-1-2 7311518119607 350

8300

Solid steel fully hardened pike hook with steel ring to fit handle.

8200 7311518119591 1 300

Pike hook8200

LOGGING TOOLS

1

1

420

15

1

1

1

1

6.4

7.9

9.5

12.7

23

Measuring tape, 15 or 20 metres, in aluminium case, with hook and belt clip.

2000 7311518110093 520

2200 73115181105671 20 625

Measuring tape2000/2200

2600/2604

Calipers2800/2802

Lightweight precision calipers of aluminium and plastic.

2800 7311518110857 1

1

320 215

2802 73115181108641 500 315

MEASURING TOOLS

Marking chalk holder with chalk 11 mm.

4500 7311518117061

Chalk holder4500

Replacement marking chalk, 11 mm, for 4500 marking chalk holder and 1206 lifting hook.(12 chalks/carton)

4509 7311518117085 1 250

Chalk4509

1

1

1515

Measuring tape, 15 metres, in plastic case with hook and belt clip.2604, as 2600, but with hook of scissors type.

2600 7311518110789 515

2604 7311518129040 515

1

1

15

15

1 40

24

Spare parts2029-2130-2210-2647

Spare parts for measuring tapes.For measuring tape 20002029 = Drum with pinion2034 = Main spring2036 = Gear cover plate2037 = Gear house with bearings2038 = Gear cover plate with bearings2039 = Locking ring2043 = Main spring housingFor measuring tape 22002210 = Tape refill 20 m, with hinge and rivets2219 = Drum with bearings2224 = Main spring2226 = Gear cover plate2227 = Gear house with bearings2228 = Gear cover plate with bearings2245 = Main spring housing2259 = Locking ring

= Clip for spring hook

= Swivel for release hook

For measuring tape 26002610 = Tape refill 15 m, with drum2634 = Main spring housing2637 = Gear house, complete2647 = Locking screwFor measuring tapes 2000 and 22002130 = Main shaft with bearings2131 = Gear wheel2132 = Bearing bushing with screw and nut2133 = Spacer with 2 screws2135 = Spring hub2140 = Nylon guide post with 2 screws2147 = Locking screw for 2133 and 21402152 = Rivet for spring housingSpare parts in common for measuring tapes 2000, 2600 and 2601.2110 = Tape refill 15 m, with holder and rivets2112 = Tape refill 15 m, complete with release hook 2102Spare parts in common for all measuring tapes.2102 = Release hook with hinge and rivets2106 = Release hook2141 = Spring hook21422149 = Hinge2150 = Rubber stop2151 = Screw for tape21542156 = Rivet2157 = Plastic end, 0,5 m2159 = Plastic band, 25 m

MEASURING TOOLS

25

2029 7311518110109 5

2034 7311518110116 220

2036 7311518110123 5

2037 7311518110130 7

2038 7311518110147 8

2039 7311518110154

2043 7311518110185 5

2210 7311518110574 206

2219 7311518110581 1

2224 7311518110611 216

2228 7311518110642

2610 7311518110796 1 175

2634 7311518110802 1

1

1

1

226

2637 7311518110819 0

2647 7311518110826 10 4

2130 7311518110307 9

2132 7311518110321 10 3

2133 7311518110338 10 2

2135 7311518110345

2140 7311518110352 10 2

2147 7311518110420 25 1

2110 7311518110284 1 162

2112 7311518110291 1

1

175

2102 7311518110239 10 12

2106 7311518110253

2141 7311518110383 51 0

2142 7311518110413 51

2149 7311518110437 10 1

2150 7311518110444 10 2

2151 7311518110451 10 2

2156 7311518110499 100 1

2157 7311518110505 10 2

2159 7311518110529 1 110

Repair tool for measuring tapes.2900 = Tape repair tool2908 = Replacement punch for 29002909 = Replacement riveting punch for 2900.

2900 7311518110871 1

1

1

310

2908 7311518110888

2909 7311518110895

2900/2908/2909

MEASURING TOOLS

11

1

1

1

1

11

1

1

1

1

1

8

5

1

1

2

22

3

18

1

5

9

1

1

4

6

26

Clearing tool3005

Clearing knife with hardened special steel blade and hickory handle.To be used for brush clearing and debranching of trees.Total length 60 cm (handle 31 cm).Plastic edge protector.

3005 7311518110918 1 600 720

3010Slashing knife for ground clearing. Tubular steel handle with direct-on molded thermoplastic grip.

3010 7311518110925 1 700 600

3022Multipurpose clearing and debranching axe with replaceable blade, hickory handle.3028 - Spare blade3029 - Spare handle

3022 7311518121693 1 660 960

CLEARING TOOLS

27

3028Replacement blade for 3022 clearing axe.

3028 7311518122911

Replacement hickory handle for 3022 clearing axe.

3029 7311518110963 1 370

3029

CLEARING TOOLS

1 90

28

Drill hoe3405

Drill hoe for planting of bare-root plants. Hardened steel blade, hickory handle.

3405 7311518111090 1 900 130

Planting auger3420

Planting auger for bare-root plants. Hardened steel blade, tubular steel shaft and wooden handle.

3420 7311518111106 1 900 2200

3424Planting auger for bare-root plants. Tubular steel shaft and hardened steel blade. Wooden handle.

3424 7311518111120 1 950 2100

PLANTING TOOLS

Planting auger for bare-root plants. Hardened steel blade, tubular, bent steel shaft and wooden handle.

3426 7311518141370 1 800 2000

3426

29

Holster4002

Holster for hooks (1204, 1206) and tongs (1401, 1408), leather and polyethylenewith spring clamp.

4002 7311518116354 1 230

4004Holster for hook (1204, 1206) and tongs (1401, 1406), leather and polyethylene with spring clamp. Withinsulated back.

4004 7311518116361 1 210

4006Holster for hook (1204, 1206) or tongs (1401, 1408), polyethylene.With rings for hanging and securing the logging tape.

4006 7311518116378 1 180

HOLSTERS

30

4010Holster for hooks (1204, 1206) or tongs (1401, 1408), polyethylene.

4010 7311518130015 1 155

Holster for hook (1204, 1206) or tongs (1401, 1408), and 6310 felling wedge.Leather and polyethylene.

4015 7311518116392 1 240

4015

General purpose tool bag for chinsaw files, hanging and securing measuring tape, including pocket for first aidkit. With insulated back

4025 7311518116415 1 130

4025

Holster for tree calipers (2800 or 2802). Leather and polyethylene.

4060 7311518116576

4060

HOLSTERS

1 80

31

4070Narrow holster for breaking bars (1000, 1002). Polyethylene with steel holder.

4070 7311518116583 1 100

4080Holder with rings for hanging and securing logging tape. Polyethylene.

4080 7311518116606

Work belt4030

Leather belt. Length 125 cm, width 40 mm.

4030 7311518116484 1 200

HOLSTERS

1 70

32

4032Terylene belt. Length 125 cm, width 40 mm.

4032 7311518116491 1 150

HOLSTERS

STORAGE

.

Composite virgin polypropylenePortable tote trayABS and brass closuresPadlock optionTools not included

Plastic Tool BoxesPTB201390/PTB201420

731415 mm

PTB201390 0140794 4 190x390x210 1000

PTB201420 0140800 4 230x420x230 1400

33

PROTECTIVE CLOTHING

.

General purpose work glove

731151

3870-GLOVE 8285531 12 8 223

Gloves

3870-GLOVE

.A thin PU material gives user better touch and feelAbsorption pad on thumb

731415

GL008-10 0167050 6 10 72

GL008-8 0167043 6 8 69

Gloves

GL008

Gloves5620

Loggers gloves with saw protection and separated right index finger. Made of leather and polyamide.3 sizes.

5620-8 7311518329501 1 160

5620-10 7311518329518 1 165

5620-12 7311518329525 1 170

34

PROTECTIVE CLOTHING

.Anti-vibration pads on fingers and palms Reflective strip across the back Absorption patch on the thumb

Gloves

GL010

731415

GL010-10 0167098 6 10 140

GL010-8 0167081 6 8 137

.Reinforced grip pads on fingers and palm Missing ends on thumb, index and middle fingers Absorption pad on thumb

Gloves

GL012

731415

GL012-10 0167104 6 10 91

GL012-8 0167111 6 8 87

.99.9% UV protection Flexible ear pieces for better fit and comfort Polycarbonate material AS - Anti scratch HV - High visibility SP - Sun protection UV - UV Protection AF - Anti mist

Eyewear

3870

731415

3870-SG11 0178865 6 UV, AS 63

3870-SG12 0178872 6 UV, SP 63

3870-SG13 0178902 6 UV, AS, HV 63

3870-SG22 0178889 6 UV, SP 70

3870-SG31 0178919 6 UV, AF, AS 78

3870-SG32 0178926 6 UV, SP 78

3870-SG12

35

5020-S

5020-M

5020-L

5020-XL

5020-XXL

5020-XXXL

Comfortable tunic in 4-way stretch Teflon treated Texxion fabric (86% Cordura & 14% Spandex).Resistant against water, oil, dirt etc.The "ripstop" weaving method makes the trousers extremely rip-safe.Velcro closing at arm ends, extened and ventilated back,Suitatable for all outdoor work. Visibility class 2, EN 471.Warm water wash, 40°C. Six sizes.

7311518328955 1 625

7311518328962 1 660

7311518328979 1 690

7311518328986 1 725

7311518328993 1 755

7311518329006 1 790

Tunic5020

PROTECTIVE CLOTHING

5120Comfortable loggers waist-trousers in stretch fabric, black colour. Front and side chainsaw protection safety class 2 (24 m/s).Exposed parts reinforced with Hydura fabric which also has an anti-wicking function.The "ripstop" weaving method makes the trousers extremely rip-safe.Stretch in waistline, extended back, buttons for braces. Warm water wash, 40°. Six sizes.

5120-S 7311518329075 1 1700

5120-M 7311518329082 1 1750

5120-L 7311518329099 1 1800

5120-XL 7311518329105 1 1850

5120-XXL 7311518329112 1 1900

5120-XXXL 7311518329129 1 1950

Straps5220

Tightening straps of nylon with clasp.Supplied in pairs.

5220 7311518118211 1 650 50

5110-XXXL

Comfortable waist trousers for outdoor work. Visibility class 1 (EN 471). Special removable inside pad on right hip for comfortable work with brushcutter.Exposed parts at bottom of legs reinforced with Hydura fabric which also has an anti-wicking function.The "ripstop" weaving method makes the trousers extremely rip-safe.Zipper on the inside of thighs for extra ventilation and stretch material in crotch for comfort and durability.Stretch in waistline, extended back, buttons for braces. Warm water wash, 40°. Six sizes.

5110-S 7311518329013 1 720

5110-M 7311518329020 1 740

5110-L 7311518329037 1 760

5110-XL 7311518329044 1 780

5110-XXL 7311518329051 1 800

7311518329068 1 900

Trousers5110

36

Ear protector5421

Ear protectors (H31P3K) with fastening of slit type to fit head protector 5405.CE certified (95081S01).

5421 7311518208875 1 200

PROTECTIVE CLOTHING

Extra wide (5 cm) strong braces.5230 - with clasps5232 - for buttons

5230 7311518118228 1 230

5232 73115183294191 175

Braces5230/5232

Complete, head protector, consisting of helmet (G3000 with UV indicator), metal net visor, visor cap, ear muffsand neck cover.Adjustable in sizes 54 - 61.

5405 7311518118242 1 700

Head protector5405

37

Loggers safety boots with penetration safe PE sole, toe cap and chainsaw protection (Class 2).2,3 mm leather plus waterproof and breathing membrane.EN ISO 20345, class II, 52 and EN ISO 17249Sizes 40 - 47.

5820-40 7311518328375 1 2400

5820-41 7311518328382 1 2425

5820-42 7311518328399 1 2450

5820-43 7311518328405 1 2475

5820-44 7311518328412 1 2500

5820-45 7311518328429 1 2525

5820-46 7311518328436 1 2550

5820-47 7311518328443 1 2575

Safety boot5820

Hygiene set (H3) for ear protectors 5421.

5430 7311518118327

Spare parts5430

PROTECTIVE CLOTHING

5428Ear protectors H520A (407 GQ) with head strap. CE certified (21359S01).

5428 7311518118303 1 270

pHead stra5450

Complete, adjustable head strap, with transparent safety visor 5446 and ear protectors 5428.

5450 7311518118396 1 490

111 80

38

5429-5480/5590Spare parts and accessories for head protectors.5444: Safety steel-mesh visor with improved visibility, for mounting onto head protector 54055445: Safety steel-mesh visor for helmet 54065446: Transparent plastic safety visor for mounting onto head strap 5450 and/or helmet 54065448: Link system, pair for visor 54445429: Fastening for head straps (4)5455: Visor cap for helmet 54065462: Safety visor cap of nylon for head protector5464: Sweatband of plastic for head protector5465: Pair, Link system for helmet 54065468: Inserts for head protector5470: Fastening for ear protectors5480: Knitted hood for head protector5590: Rain guard neck cover for head protectors

5445 7311518208974

5446 7311518118365

5464 7311518118419

5465 7311518208981

5468 7311518118426

5470 7311518130244

5480 7311518118433

5590 7311518118457

PROTECTIVE CLOTHING

1

1

1

1

1

1

1

1

175

1100

110

120

157

151

134

155

39

Debarking iro9410

nDebarking iron, complete with shaft.Blade thickness 1.5 mm / .06"With plastic edge protector.Suitable to be used as scraper for concrete, ice etc.

9410 7311518327965 1 1185 1040

9400Debarking iron blade with holder and plastic edge protector.Blade thickness 1.5 mm / .06"

9400 7311518327958 1 465

9408Replacement blade for debarking iron 9410.Blade thickness 1.5 mm / .06"With plastic edge protector.

9408 7311518327972 1 160

DEBARKING TOOLS

9430Spare shaft for debarking iron 9410

9430 7311518327989 1 1050 570

40

DEBARKING TOOLS

Concrete scraper blade with holder and plastic edge protector.Blade thickness 1.5 mm / .06"

9000 7311518119911 1 470

9000

Replacement blade for concrete scraper 9010.Blade thickness 1.5 mm / .06"With plastic edge protector.

9008 7311518119935 1 160

9008

Spare shaft for concrete scraper 9010

9030 7311518119980 1 1050 615

9030

.

.

Debarking tool with holder for shaft and replaceable blade. Opening 14 cm.Spare blade: 9429Shaft: 9430

Spare blade for 9420. Length 185 mm

9420

9429

731415

9420 7311518329433 1 45 x 280 x 200 420

731415

9429 7311518329440 1 2 x 185 x 35 50

41

Brushcutter bladesMAXI

Brushcutter blade MAXI, for professional clearing. Aggressive blade suitable for brushcutters with straight shaftand a cylinder volume over 40 cm³. Approved for 13000 rpm which is steel stamped into the blade.Blade made of hardened steel.Filing instructions inside the packaging.ISO 7113

Amm

Bmm

C

MAXI-200-20BA 7311518291365 10 200 20 22 410

MAXI-200-25BA 7311518291372 10 200 25,4 22 405

MAXI-225-20BA 7311518291389 10 225 20 24 585

MAXI-225-25BA 7311518291396 10 225 25,4 24 580

EIABrushcutter blade EIA, for professional all round clearing. Suitable for brushcutters with straight shaft and acylinder volume over 30 cm³. Approved for 13000 rpm which is steel stamped into the blade.Blade made of hardened steel.Filing instructions inside the packaging.ISO 7113

Amm

Bmm

C

EIA-200-20BA 7311518291402 10 200 20 22 405

EIA-200-25BA 7311518291419 10 200 25,4 22 400

EIA-225-20BA 7311518291426 10 225 20 24 590

EIA-225-25BA 7311518291433 10 225 25,4 24 585

CLEARING BLADES

42

ISO 7113

XRT-200-20BA 731151829144

XRT-200-25BA

XRT-225-20BA

XRT-225-25BA 7311518291471

Brushcutter blade XRT, for professional clearing. Blade runs smoothly due to the integrated depth gauge.Suitable for brushcutters with straight shaft and a cylinder volume over 24 cm³. Approved for 13000 rpm which issteel stamped into the blade.Blade made of hardened steel.Filing instructions inside the packaging.

Amm

Bmm

C

0 200 20 22 415

7311518291457 10

10

200 25,4 22 410

7311518291464 10 225 20 24 590

10 225 25,4 24 585

XRT

Professional grass and weed cutting blade with 8 teeth which are ground for sharpness. Approved for 13000rpm which is steel stamped into the blade.Blade made of hardened steel.Filing instructions inside the packaging.ISO 7113

Amm

Bmm

C

GRA8-200-20BA 7311518291570 10 200 20

GRA8-200-25BA 7311518328030 10 200 25,4 8

8

395

GRA8-225-20BA 7311518291594 10

10

225 20 8 595

GRA8-225-25BA 7311518328040 225 25,4 8 590

Grass and weedcutting bladesGRA8

CLEARING BLADES

004

43

OLD Forestry hand toolsLOGGING TOOLSMEASURING TOOLSCLEARING TOOLSPLANTING TOOLSHOLSTERSPROTECTIVE CLOTHINGWEDGESDEBARKING IRONSCLEARING BLADES

GRA4Professional grass cutting blade with 4 teeth. Double edged teeth makes the blade turn able to be used in bothdirections. Approved for 13000 rpm which is steel stamped into the blade.Blade made of hardened steel.Filing instructions inside the packaging.ISO 7113

Amm

Bmm

C

GRA4-200-20BA 7311518291532 10 200 20 4

44

320

GRA4-200-25BA 7311518328016 10 200 25, 315

GRA4-225-20BA 7311518291556 10 225 20 4

44

460

GRA4-225-25BA 7311518328023 10 225 25, 455

CLEARING BLADES

GRA3Professional grass cutting blade with 3 teeth. Double edged teeth makes the blade turn able to be used in bothdirections. Approved for 13000 rpm which is steel stamped into the blade.Blade made of hardened steel.Filing instructions inside the packaging.ISO 7113

Amm

Bmm

C

GRA3-255-20BA 7311518291495 10 255 20 3

3

375

GRA3-255-25BA 7311518327996 10 255 25, 370

GRA3-300-20BA 7311518291518 10 300 20 3

3

500

GRA3-300-25BA 7311518328009 10 300 25, 495

4

4