2
Catalog # Project Comments Prepared by Type Date SPECIFICATION FEATURES 07/25/2011 11:15:35 AM Consult your representative for additional options and finishes. Specifications and Dimensions subject to change without notice. ADN100244 ORDERING INFORMATION DESCRIPTION A return to simplicity, elegance and minimalism ... Slender lines of light set in an architectural environment are the essence of Straight and Narrow. This series accommodates most architectural lighting design applications. Generation II enhancements and new features: - Extruded housing offers precise in-line appearance and enhanced rigidity - Staggered lamping minimizes socket shadow - Flush and regressed lay in lens provides clean look and easy maintenance - Unique snap in louver design for easy installation and better retention - Continuous runs are provided to the nearest foot Construction Extruded aluminum housing. Nominal 3', 4', 6' or 8' illuminated sections. Used in run configuration. Shielding Trimless, lay-in, white, high transmission or regressed acrylic diffuser. Snap-in, high performance, parabolic louver with or without ovelay. Electrical 120, 277 or Universal (120-277) Voltage electronic ballast. Fixtures and electrical components certified to UL and CUL standards. Finish Durable, low gloss, white, powder coated acrylic. Optional custom finish. Mounting Recessed. Specify: (ETG) 15/16" Exposed T-grid (STG) 9/16" Screw Slot Grid (SR) Sheet Rock (Flanged) (FSR) Flangeless Sheet Rock (FTG) 9/16" Exposed T-grid 22DR Straight & Narrow Gen II Continuous 1 T5 1 T5HO Recessed Direct Light Distribution: Indirect = 0% Direct = 100% S22DR/1T5 ETG WITH LENS S22DR/1T5 ETG WITH LOUVER SUPPORT WIRE (BY OTHERS) 2 3/8” 4” 3” SAMPLE NUMBER: S22DR-1T5HO-ETG-XX-UEB-EM-GLR-S92 Length xx =Continuous Run Series 22 =Straight & Narrow 22 Light Output D=Direct Number of Lamps (not included) 1=1 Lamp Lamp Type T5 T5HO V oltage 1=120V 2=277V U =Universal Ballast 1 EB =Electronic Ballast (standard) DB =Dimming Ballast Fusing GLR GMF Mounting R =Recessed 1 R D Ceiling Type ETG =15/16” exposed T-grid STG =Slot T-grid SR =Sheet Rock (Flanged) FSR=Sheet Rock (Trimless) FTG =9/16” exposed T-grid Shielding Options S91 =High performance louver S91P =High performance louver with acrylic overlay S92 =Satin white lens S92HT =High transmission lens S22R=Satin white regress lens • Acrylic lenses will be slightly shorter than housing length at ambient temperature in order to compensate for normal thermal expansion during operation Emergency EM = Emergency Pack EC = Emergency Circuit 1 2 For some electronic, dimming and EM battery pack ballast combinations, fixture has space limitation (consult factory). For dimming, specify ballast option Standard EM Pack is for 1 lamp Due to various constraints, some options may not be combined with others. Please consult your COOPER Lighting representative for additional information. 2 Regress lens not available with T5HO lamping 1 Required voltage information. Maximum ballast width=1.18” S91WP =White painted louver S91W =White painted louver with acrylic overlay 1 Electronic Dimming Balast Options 1 = Lutron 3 wire line voltage 1% dimming 2 = Lutron 3 wire line voltage 10% dimming 3 = Lutron Eco System Bus 1% dimming 4 = Lutron Eco System Bus 10% dimming 5 = 0-10 Volt dimming 7 = 2 step dimming 6 = Hot & Neutral line voltage dimming NEO-RAY

,9 - Cooper Industries. Shielding Trimless, lay-in, white, ... 277 or Universal ... dimming and EM CBUUFSZ pack CBMMBTU

Embed Size (px)

Citation preview

Catalog #

Project

Comments

Prepared by

Type

Date

SPECIFICATION FEATURES

07/25/2011 11:15:35 AMConsult your representative for additional options and finishes.

Specifications and Dimensions subject to change without notice. ADN100244

ORDERING INFORMATION

DESCRIPTION

A return to simplicity, elegance and minimalism ... Slender lines of light set in an architectural environment are the essence of Straight and Narrow. This series accommodates most architectural lighting design applications.Generation II enhancements and new features:- Extruded housing offers precise in-line appearance and enhanced rigidity- Staggered lamping minimizes socket shadow- Flush and regressed lay in lens provides clean look and easy maintenance - Unique snap in louver design for easy installation and better retention- Continuous runs are provided to the nearest foot

ConstructionExtruded aluminum housing. Nominal 3', 4', 6' or 8' illuminated sections. Used in run configuration.

ShieldingTrimless, lay-in, white, high transmission or regressed acrylic diffuser. Snap-in, high performance, parabolic louver with or without ovelay.

Electrical120, 277 or Universal (120-277) Voltage electronic ballast. Fixtures and electrical components certified to UL and CUL standards.

FinishDurable, low gloss, white, powder coated acrylic. Optional custom finish.

MountingRecessed. Specify: (ETG) 15/16" Exposed T-grid (STG) 9/16" Screw Slot Grid (SR) Sheet Rock (Flanged)(FSR) Flangeless Sheet Rock(FTG) 9/16" Exposed T-grid

22DR

Straight &Narrow

Gen II

Continuous

1 T51 T5HO

Recessed

Direct

Light Distribution:

Indirect = 0%

Direct = 100%

S22DR/1T5 ETG WITH LENS S22DR/1T5 ETG WITH LOUVER

SUPPORT WIRE(BY OTHERS)

2 3⁄8”

4”

3”

S A M P L E N U M B E R : S 2 2 D R - 1 T 5 H O - E T G - X X - U E B - E M - G L R - S 9 2

Lengthxx =Continuous Run

Series22 =Straight & Narrow

22

Light OutputD=Direct

Number of Lamps(not included) 1=1 Lamp

Lamp TypeT5T5HO

Voltage1=120V2=277VU =Universal

Ballast 1

EB =ElectronicBallast (standard)DB =DimmingBallast

FusingGLRGMF

MountingR =Recessed

1RD

Ceiling TypeETG =15/16” exposed T-gridSTG = Slot T-gridSR =Sheet Rock

(Flanged)FSR=Sheet Rock

(Trimless)

FTG =9/16”exposed T-grid

Shielding OptionsS91 =High performance louverS91P =High performancelouver with acrylic overlay

S92 =Satin white lensS92HT =High transmission lensS22R=Satin white regress lens• Acrylic lenses will be slightly shorter than housing length at ambient temperature in order to compensate for normal thermal expansion during operation

EmergencyEM = EmergencyPackEC = EmergencyCircuit

1

2

• For some electronic, dimming and EM battery pack ballast combinations, �xture has space limitation (consult factory).

•• For dimming, specify ballast option

• Standard EM Pack is for 1 lamp

Due to various constraints, some options may not be combined with others. Please consult your COOPER Lighting representative for additional information.

2 Regress lens not available with T5HO lamping

1 Required voltage information. Maximum ballast width=1.18”

S91WP =White painted louver S91W =White painted louver

with acrylic overlay

1Electronic Dimming Balast Options1 = Lutron 3 wire line voltage 1% dimming2 = Lutron 3 wire line voltage 10% dimming3 = Lutron Eco System Bus 1% dimming4 = Lutron Eco System Bus 10% dimming 5 = 0-10 Volt dimming

7 = 2 step dimming6 = Hot & Neutral line voltage dimming

NEO-RAY

Neo-Ray • Customer First Center • 1121 Highway 74 South • Peachtree City, GA 30269 • TEL 770.486.4800 • FAX 770.486.4801 07/25/2011 11:15:35 AMSpecifications and Dimensions subject to change without notice. ADN100244

PHOTOMETRICS

MOUNTING INFORMATION

FEATURES AND OPTIONS

22DRStraight & Narrow - Gen IIZonal Lumen Summary

Zone Lumens %Lamp %Fixt

0-30 913.40 18.30 30.700-40 1448.08 29.00 48.700-60 2407.59 48.20 81.000-90 2973.02 59.50 100.000-180 2973.02 59.50 100.00 Total Luminaire Efficiency = 59.50%

Candela

Angle 0 45 90 0 1243 1243 1243 5 1235 1232 1221 10 1210 1203 1187 15 1171 1156 1136 25 1054 1023 990 35 895 854 812 45 713 672 630 55 526 491 458 65 347 324 303 75 186 176 166 85 56 51 49 90 0 0 0(1) T5 Lamp

S92HT - High Transmission LensWhite Painted Upper ReflectorWhite Painted Optic ChamberEfficiency: 59.50%Report#: P30295

22DRS22DR/1T5HO/STG4D/UEB-SI-S92HT

LEGEND: 0-deg: 45-deg: 90-deg:

450

900

1350

0˚ 15˚ 30˚

45˚

60˚

75˚

90˚

ETG (15/16" Exposed T-Grid) Mounting Details

3” Grid center to center 3” Grid center to center 25⁄8” Rough in wide opening 27⁄8” Rough in wide opening3¼” Grid center to center

SR (Sheetrock) Mounting Details

FSR (Flangeless Sheetrock) Mounting Details

STG (9/16" Slot T-Grid) Mounting Details

FTG ( 9/16" Fine T-Grid) Mounting Details

2 316 "

44-3/16" 4FT BOR62-3/16" 6FT BOR86-3/16" 8FT BOR

3 316 "

916 "

WIREFEED

MOUNT

40" 4FT BOR58" 6FT BOR82" 8FT BOR

BOR FIXTURE INT FIXTURE EOR FIXTURE

3/16 " END PL ATE

30" 3FT INT42" 4FT INT60" 6FT INT84" 8FT INT

33-3/16" 3FT EOR44-3/16" 4FT EOR62-3/16" 6FT EOR86-3/16" 8FT EOR

30" 3FT INT42" 4FT INT60" 6FT INT84" 8FT INT

33" 3FT EOR44" 4FT EOR62" 6FT EOR86" 8FT EOR

S91 High Performance

Louver

S91PHigh Performance Louver with Acrylic

Ovelay

S22RSatin White Regress

Lens

S92Satin White Lens

S92HTHigh Transmission

LensCorner