.75” (19)

4.00”(102)

3.00” (76)

.75” (19)

Solitediffusion lens

4.00”(102)

3.00” (76)

Ball CatchRetainers

Aperture LensLocation

CATALOG NUMBERTYPEPROJECT

HI-EFFICIENCYTRIMLESS LED

VF150 Series - 9702 TrimRECESSED SQUARE BEVELED ACCENT 1-LIGHT

SQUARE BEVELED TRIMLESS ACCENT - The VF150 Series is a large aperture, high efficiency family of products that meet and exceed the needs of today’s lighting designers and specifiers that are seeking performance. Formed of die-cast aluminum.

9702

SQUARE BEVELED TRIMLESS ACCENT• Fixed or adjustable light output application• 4.00” square die-cast aluminum• 3.00” square large aperture• .75” bevel regress• Trimless insert• Ball catch retainer for easy trim insertion and removal• Safety cable included• Powder coat finish

Specifications

Measurements in ( ) are metric equivalents.

(Shown with lens)

3000K

2%

100

%

CCT

Dimming Curve

Ou

tpu

t

1800K

TM

HEADQUARTERS

9200 Deering Avenue

Chatsworth CA 91311

Telephone: 818-885-1335

Toll Free: 855-885-1335

Fax: 818-576-1335

©2018 LF ILLUMINATION LLC

We reserve the right to change or

withdraw specifications without prior notice.

C US

®

Limited

LF Illumination’s new warm dimming allows the features of warm dimming technology to be installed in fixtures and price points once thought impossible.The small footprint LED COB design uses many of our standard subassembly components and is compatible with virtually all standard dimming protocols currently available.The LED itself maintains 95CRI typ (92CRI min) across the usable CCT range of 3000K to 1800K and dims down to around 2% visible light output.

www.lfillumination.comPAGE 1rev: 112018

TRIM ORDERING INFO

TRIM SERIES TRIM FINISH OPTIONAL APERTURE LENS

9702

4.00” Square Beveled AccentLarge ApertureDie-Cast AluminumTrimless Insert

MW WhiteMB BlackXX Custom

CL Clear Glass Lens

DL Diffused Glass Lens

DF Diffused HE* Lens

WF Wide Distribution HE* Lens

SHCL Shower Rated Clear Glass Lens

SHDL Shower Rated Diffused Glass Lens

SHDF Shower Rated Diffused HE* Lens

SHWF Shower Rated Wide Distribution HE* Lens

* High Efficiency

9702

Example: 9702-MB-DL

Optical AccessoryLocation

40° TiltDie Cast Alum.RotatableMud Plate

6.40”(163)

5.40”(137)

Tie downTabs

Accommodates  1/2”, 5/8”, 3/4” & 1.0”

Ceiling Thickness

1

9.40” (239)

10.88”(276)

Integral Power Supplyt

4.00”(102)

45° Rotatable45° Rotatable

1”

Accommodates  1/2”, 5/8”, 3/4” & 1.0”

Ceiling Thickness

1

ButterflyBracket

ButterflyBracket

45° Rotatable45° Rotatable

Die Cast Alumn.RotatableMud Plate

8.65”(220)

Integral Power Supply& Wiring Compartment

6.64” (169)

4.63”(118)

3.63”(92)

Tie downTabs

4.00”(102)

360°Rotation

AdjustablePlaster Frame

AdjustablePlaster Frame

OpticalAccessory Location

* Housing shipped with removable mud-guard for protecting the inside of housing / components from dust, debris, plaster & paint during installation.

Straight Collar

Solid Ceiling Collar: For trimless installation in wood, stone, etc.

SOLID CEILING APPLICATIONHVS-1AA-T / HVS-1BA-T

Solid Ceiling

1” Max. Depth

Mud-GuardMud-Guard

VF150 - 9702 Series HousingSQUARE FIXED AND ADJUSTABLE RECESSED DOWNLIGHT

SQUARE TRIMLESS HOUSING• Housing of all steel construction• Adjustable die cast aluminum mud plate• Black powder coat finish• Ceiling Cut-out - 6.50” x 6.50”• Solid Ceiling Cut-out: - 4.10” x 4.10”

ELECTRICAL• Field-replaceable integral LED driver• Electrical wiring compartment integrated into housing construction• Internal thermal protection• Easy maintenance access through ceiling opening• Rated for through-branch wiring• Dimmable

MOUNTING• Butterfly brackets for commercial installation in drywall and other mud in ceiling types• Perforated plate adjusts for 1/2”, 5/8”, 3/4” & 1.0” ceiling thickness• Includes heavy-duty L-Bars™ hanger bar system for residential • installation

LABELS• Suitable for damp location, except when ordered with shower trim - Suitable for wet location• Air-Tight / IC Optional

Specifications

Measurements in ( ) are metric equivalents.

(HVS-1AA-S)MINI SIZED HOUSING

(FD) Fixed Downlight Only

(HVS-1BA-S)SMALL SIZED HOUSING(AD) Adjustable Downlight

(FD) Fixed Downlight (Also available)

HEADQUARTERS

9200 Deering Avenue

Chatsworth CA 91311

Telephone: 818-885-1335

Toll Free: 855-885-1335

Fax: 818-576-1335

©2018 LF ILLUMINATION LLC

We reserve the right to change or

withdraw specifications without prior notice.

HOUSING ORDERING INFO

SERIESLED MODULE WATTAGE AND INFORMATION CRI / COLOR BEAM HOUSING TYPE DRIVER VOLTAGE OPTIONS

HVS-1AA-S Mini Square TrimlessNew Construction Housing

HVS-1BA-S Small Square TrimlessNew Construction Housing

HVS-1AA-T Mini Square Solid CeilingNew Construction Housing

HVS-1BA-T Small Square Solid CeilingNew Construction Housing

Black finish is standard

ValuDIM™15V 15W LED / 1223lm del.3000-1800K Warm Dimming

Delivered Lumens@ 92CRI / 3000K / Narrow Beam Fixed

9220 92CRI / 3000-1800KWarm Dimming ValuDIM Only

ValuDIM™N Narrow 17°M Medium 25°W* Wide 38°

FD Fixed

AD* Adjustable

* HVS-1BA-X Small housing only

DM Dimming MultipleForward/Reverse Phase (@ 120V only)0-10V Wires Present(@ 120-277V)

D3* Lutron Hi-lume™ Forward Phase 1% (@ 120V only)DE* Lutron Hi-lume™ EcoSystem™

1% with Soft-On, Fade-to-Black™

DP* Lutron Hi-lume™ Premier™ 19w max.0.1% with Soft-On, Fade-to-Black™

* HVS-1BA-X Housing only

U 120-277V*1 120V**2 277V**

* Not Available in 26C

** 26C Only

IC Insulated Ceiling*

* Not Available in 26C

For Emergency LED Inverter Options See Page 5CREE

08C 08W LED / 1094lm delivered13C 13W LED / 1473lm delivered19C 19W LED / 2117lm delivered*26C 26W LED / 2850lm delivered*

Delivered @ 80CRI / 3000KNarrow Beam Fixed

* HVS-1BA-X Small housing only

8027 80CRI / 2700K8030 80CRI / 3000K8035 80CRI / 3500K8040 80CRI / 4000K9227 92CRI / 2700K 9230 92CRI / 3000K9235 92CRI / 3500K9240 92CRI / 4000K9827 98CRI / 2700K9830 98CRI / 3000K9835 98CRI / 3500K9840 98CRI / 4000K

CREE N Narrow 16°M Medium 28°W Wide 42°V Wide 73°

“WF” Aperture lens recommended for wider distributions.

Example: HVS-1BA-S-19C-8030-W-AD-DM-U-IC

C US

®

Limited

CALIFORNIA TITLE 24IC / Air-Tight

www.lfillumination.comPAGE 2

rev: 122818

OPTICAL ACCESSORIESVF150 SERIES

OPTICAL ACCESSORY DESCRIPTION

LIGHT SOURCE

LED

Clear Glass Lens OPTB-CLR

Clear Acrylic Lens OPTBS-P-CLR

Hex Cell Louver OPTB-HXL

Diffusion Glass Lens - Solite OPTB-DFL

Diffusion Textured Acrylic Lens OPTBS-P-TFL

Diffusion Acrylic Lens Diffusion Lens is included on all Luminaires installed with ValuDIM (15V9220) sources

OPTBS-P-DFL

Wide Diffusion Acrylic Lens OPTBS-P-WFL

Linear Spread Glass Lens OPTB-LSL

Linear Spread Acrylic Lens OPTBS-P-LSL

Prismatic Glass Spread Lens OPTB-PSL

Prismatic Acrylic Spread Lens OPTBS-P-PSL

Reflector

Narrow Beam OPTB-REFLN

Medium Beam OPTB-REFLM

Wide Beam(Not recommended for 1.80” small adjustable aperture)

OPTB-REFLW

Very Wide Beam(Not recommended for 1.80” small aperture)

OPTB-REFLV

HEADQUARTERS

9200 Deering Avenue

Chatsworth CA 91311

Telephone: 818-885-1335

Toll Free: 855-885-1335

Fax: 818-576-1335

©2018 LF ILLUMINATION LLC

We reserve the right to change or

withdraw specifications without prior notice.

* Other filters, colored glass, dichroics & micro-lenses available upon request

www.lfillumination.comPAGE 3

rev: 102518

VF150 Series - Optical Lens Holder makes for ease of installation and field changeable options

©Tripar® 08/2016 Patent Pending

T-bar slot

Auxiliary nailing hole

Five-feature integral nail

Slot to allow upper tab to deflect

Optional T-bar locking hole, for #8 self-tapping

screw

Tabs for joist positioning

The parts are assembled by aligning the end of one, with the alignment marks of the other.

L-shaped cross section for each member, when assembled together provides a ½” X 1 ½” C-Channel shaped profile for superior rigidity. Ordered separately for MF100, MF150, MF300, MF350, MF400, Iride, Moli, & Multiquadro

Consists of two identical parts in all aspects, therefore interchangeable. Fits into C-Channel notches in Butterfly Bracket.

Marking lines for 12”, 16” & 24” joist spacing & 24” T-bar, allow locking before affixing to ceiling

For 12” joist spacing,

Cut to relief hole

Optional: To lock, pry arrowhead outward or push in

1

2

Hole/Slot for nailing to underside of joist. Slot allows up to 5/8” lateral fixture adjustment or

removal

36’’- 48’’ capacity with addition of 1 or 2 more identical members

Alignment marks for easy assembly

Contains integral nails, which are:

1. Located as far away as possible from the main bar to permit easy nailing.

2. Oriented parallel to joist wood grain for easier installation.

3. Toothed to resist pullout. 4. The sharpest available achieved through a

proprietary process. 5. Retracted and surrounded for added safety

prior to installation

10’’- 24’’ **

Fastenerless bar hanger extension lock, accessible from side or bottom. Using pliers, twist until vertical

*

**

*

Installation videos available at www.TriparInc.com/L-Bar

Item #LBARS4PK - 4 pack of bars included (Good for 1 fixture).(Included with Bullseye, VF100, VF150, VF300 New Construction & IC Housings)Not compatible with VF100 Max-A & Remodel Housings

L-Bars™FEATURE OVERVIEW

HEADQUARTERS

9200 Deering Avenue

Chatsworth CA 91311

Telephone: 818-885-1335

Toll Free: 855-885-1335

Fax: 818-576-1335

2018 LF ILLUMINATION LLC

We reserve the right to change or

withdraw specifications without prior notice.

HEADQUARTERS

9200 Deering Avenue

Chatsworth CA 91311

Telephone: 818-885-1335

Toll Free: 855-885-1335

Fax: 818-576-1335

HEADQUARTERS

9200 Deering Avenue

Chatsworth CA 91311

Telephone: 818-885-1335

Toll Free: 855-885-1335

Fax: 818-576-1335

www.lfillumination.comPAGE 4

rev: 061518

CATALOG NUMBERTYPEPROJECT

EMERGENCY INVERTERS

LED ELV MLV

HEADQUARTERS

9200 Deering Avenue

Chatsworth CA 91311

Telephone: 818-885-1335

Toll Free: 855-885-1335

Fax: 818-576-1335

©2018 LF ILLUMINATION LLC

We reserve the right to change or

withdraw specifications without prior notice.

The emergency inverter provides full power up to its load rating for no less than 90 minutes as prescribed by UL 924 Listed for US and Canada & CSA C22 No. 141 Unit Equipment for Emergency Lighting.

The inverter is installed remotely, behind an access panel or with above ceiling access required (behind grid ceilings are also acceptable). The inverter is not accessible through the fixture opening in the ceiling. The inverters are rated for 120-277V and will work for LED, ELV, MLV, incandescent & fluorescent loads.

The inverter is paired for the connected load wattage of the light source(s).

If the load rating requirement is 25W (or less) then we recommend LF #EMREM25 IOTA #IIS-25-I: http://www.iotaengineering.com/iis25.htm Instructions: http://iotaengineering.com/Inverter/iis25_manual.pdf Wiring Diagram: http://iotaengineering.com/diagrams/ad10.pdf

If the load rating requirement is 25-35W then we recommend LF #EMREM35 IOTA #IIS-35-I: http://iotaengineering.com/Inverter/iis35_spec.pdf Instructions: http://iotaengineering.com/Inverter/iis35_manual.pdf Wiring Diagram: http://iotaengineering.com/diagrams/ad10.pdf

If the load rating requirement is 35-50W then we recommend LF #EMREM50 IOTA #IIS-50-I: http://iotaengineering.com/Inverter/iis50_spec.pdf Instructions: http://iotaengineering.com/Inverter/iis50_manual.pdf Wiring Diagram: http://iotaengineering.com/diagrams/ad10.pdf

Consult LF Illumination for higher wattage inverter offerings.

25W

35W

50W

www.lfillumination.comPAGE 5

rev: 061518