8030 Attachments 10-06 - Deere · Issue 10-2006 (RI, RII) ATTACHMENTS FOR FIELD INSTALLATION 8030 Series Tractors-5 Cigarette Lighter and Ash Tray Cigarette Lighter heat element and

8030 Series TractorsATTACHMENTS

Issue 10/2006 Region II

John Deere Werke Mannheim

Issue 10-2006 (RI, RII) ATTACHMENTS FOR FIELD INSTALLATION 8030 Series Tractors-2

ATTACHMENTS FOR FIELD INSTALLATIONUnless otherwise indicated, the following attachments can be installed on all 8030-Series tractors. Please note thatunder „Order From“ it is indicated where the individual field installation kits can be sourced through. The denoted„EPDC“ bundles can be ordered through the normal parts channels. The denoted „CG“ bundles are availablethrough complete goods channels.

OPERATOR STATION

Instructional Seat

Padded and upholstered Instructional Seat provides com-fortable seating for an additional passenger. The seatincludes a back rest with storage netting at the rear and aretractable seatbelt.

Field Office

Field Office provides a convenient area for storage of officesupplies. Mounts in an easy to access location at the left rearside of the cab:

• Ideal for storage of such items as mobile phone, papers,calculator, PDA’s, writing materials and other uses.

• Lid provides a flat writing surface.• An external 12-volt electrical outlet is provided with the

Field Office

Order From Bundle Description

EPDC RE192707Instructional Seat.Not compatible with AR116863 Field Office.


EPDC AR116863Field Office.Not compatible with RE192707 Instructional Seat.


Rear Pull Down Sun Shade

A pull-down shade for the rear windscreen improves opera-tor visibility on sunny days by blocking direct light andreducing glare.

Accessories Mounting Bracket

The accessories mounting bracket assists the installation ofmonitors, phones, radios and other accessories in single con-venient location. The bracket bolts into existing holes on the8030 Series tractors.

Utility Tray and Beverage Holder

(8020 shown)

The utility tray contains an additional beverage holder and astorage platform in which to place papers and other materi-als.

Order From Bundle DescriptionEPDC RE197944 Rear Pull Down Sun Shade.

Order From Bundle DescriptionEPDC RE245374 Accessories Mounting Bracket.


EPDC RE162644Utility Tray and Beverage HolderRequires Accessories Mounting Bracket RE245374


Left Hand Convenience StepLeft-Hand Convenience Step provides improved access tothe front window for cleaning and for GreenStar StarFireReceiver mounting / dismounting:

• Tread serrated design is self cleaning and slipresistant.

(8020 shown)

Right Hand Step KitThe right-hand step kit includes full-sized steps and handrailto aid cleaning of the front and side cab windows.

(8020 shown)

INSULATED COOL BOX

The Insulated Cool Box aids operator comfort by keepingfood and drinks cool and stored securely. The box can bequickly removed for cleaning or movement betweenmachines. Includes fastening straps and mounting hardware.

REFRIGERATED COOL BOX

The 12-volt Refrigerated Cool Box will keep food anddrinks chilled through hot working conditions. The box iscapable of maintaining a 30°C difference to ambient tem-peratures and its 6-litre capacity will take standard 0.75 lbottles.

The kit additionally features a battery security system pre-venting accidental discharge while the box is still connectedto the cabin’s 12-volt cigarette lighter outlet without theengine running. The box can be easily removed for cleaningor for movement between machines.

Order From Bundle DescriptionEPDC AR252678 Left Hand Convenience Step


EPDC RE255767 Right Hand Step KitIncludes steps and handrail

Order From Bundle DescriptionEPDC AL112070 Insulated Cool Box

Order From Bundle DescriptionEPDC MC900001 Refrigerated Cool BoxEPDC MC900002 Mounting kit


Cigarette Lighter and Ash Tray

Cigarette Lighter heat element and Ash Tray can be suppliedfor those customers wishing to equip their tractor.

Replacement Floor Mat

Replacement rubber Floor Mats can be purchased to helprestore the cabin’s original appearance.

OPERATOR STATION ELECTRICAL

Powerstrip Adapters

Powerstrip adapters allow electrical connection for monitorsand equipment not fitting the tractor’s standard Powerstripor 3-pin oulets. Available adapters include:

• 1m cable for custom hard-wiring to components• Cigarette lighter-style outlet• North American-style flat 3-pin adapter (replicates 3-

pin outlet found on Command Console)• European-style round 3-pin adapter (as available on

6020-Series and pictured above).Powerstrip adapters can also be used with the Field Office.

Antenna Mount and Wiring for Business Band (Two-way) Radio

Provides the wiring and an external antenna mount for busi-ness band (two-way) radios.

Order From Bundle DescriptionEPDC AH104259 Ash TrayEPDC R212866 Ash Tray InsertEPDC AR60937 LighterEPDC AH108380 Bulb

Order From Bundle DescriptionEPDC R244128 Floor Mat


EPDC RE67013 Standard Connector with 1m Cable (for hard-wiring electrical components)

EPDC RE67014 Cigarette Lighter Outlet AdapterEPDC RE67016 RII 3 Pin Adapter for Powerstrip


EPDC RE219922 Antenna Mount and Wiring for Business Band (Two-way) Radio.


LIGHTING

Field Vision Xenon HID Rear Lighting

The fender-mounted Field Vision Rear Lighting bundle pro-vides a Xenon High Intensity Discharge (HID) light forimproved visibility to rear hitched implements when work-ing at night or in low light conditions. Xenon HID lightsprovide extreme brightness and a daylight colour output forexcellent field definition.

• 2.5x greater light flux (illuminance) than halogenworking lights

• 35% lower energy consumption than halogen bulbs• 5x greater service life than halogen bulbs.

Two Roof-Mounted Side Flood LightsFor improved vision to the side of the tractor, the 8030Series Tractors may be equipped with two 65W floodlights,one on each side of the cab. The two roof-mounted halogenside floodlights that are also included in the factory installedField Vision Xenon HID Front Lighting Package.

Rotary Beacon Light

Rotary beacon lights are available to meet requirements incommercial or governmental applications. The rotating,high-intensity light mounts on the front left corner of the cabroof in the up position when in use and can be lowered whennot required to prevent damage. On / Off switch for the bea-con light is located within easy reach of the operator.

Extremity Lighting

Extremity Lighting offers additional road safety when trans-porting tractors where large rear tyres, the extra-width rearfenders, or wide tread widths means the tractor exceeds atotal 2.55 metre width. The lights include:

• Integrated turn signal (amber).• Continuous extremity warning lights front (white) and

rear (red):- Continuous red lens brightens when brakes are

applied.• Foldable arms:

- Arms tuck inside the fenders when not in use forprotection from damage


EPDC RE242550Field Vision Xenon HID Rear Lighting Conversion Kit.Includes two rear fender-mounted lights per kit.


EPDC AR223359 Two Roof-Mounted Side Flood Lights.Lights Included in Code 9066

Order From Bundle DescriptionEPDC RE239930 Rotary Beacon KitEPDC RE235448 Rotary Beacon Switch Kit


- Unfolded, the lighting kit offers a total vehiclecoverage of 2.95 metres edge-to-edge.

PERFORMANCE MANAGEMENT

Dual Beam Radar Sensor Kit

The new dual beam ground speed Radar Sensor activatesfunctions contained within the CommandCenter and corner-post displays by allowing the tractor to reliably calculate theactual ground travel speed independent of wheel speed. Theradar needs to be installed in order to utilise the hitch slipcommand or to calculate actual wheel slip.

Additionally, the radar improves the accuracy of the follow-ing CommandCenter readouts:

• Area covered• Area / hour • Distance and ground speed

Note: Additional Radar Mounting Bracket KitRE244407 is required for field installation ofDual Beam Radar Sensor.

Implement Switch

Mounts on the implement and monitors when the implementis raised or lowered. When used in conjunction with theRadar Sensor and Performance Monitor gives 100% accu-rate hectare coverage.

9-Pin Implement Feedback Connector for TouchSet Depth Control

(8020 shown)

Order From Bundle DescriptionEPDC RE207025 Right-hand Bracket, order 1xEPDC RE207026 Left-hand Bracket, order 1xEPDC RE216040 Arm, order 2xEPDC 37M7372 Screw, order 4xEPDC RE193222 Lamp, order 2xEPDC R204170 Lens, order 2x EPDC R179273 Shield, order 2xEPDC 21M7303 Screw, order 14xEPDC R106529 Nut, order 4xEPDC R180671 Washer, order 4xEPDC 21M7447 Screw, order 4xEPDC 14M7450 Flange Nut, order 4xEPDC RE193224 Lamp, order 2xEPDC R204172 Lens, order 4xEPDC R204171 Lens, order 2xEPDC 19M7785 Screw, order 4xEPDC R216838 Screw, order 2xEPDC R171976 Grommet, order 2xEPDC RE193252 Turn Signal Wiring Harness, order 2xEPDC R174049 Shield, order 2xEPDC RE12363 Electrical Connector Assy, order 2xEPDC 57M7244 Elec. Connector Terminal, order 2xEPDC 57M8416 Elec. Connector Terminal, order 2x

Order From Bundle DescriptionEPDC RE243242 Radar Sensor Kit (not UK).EPDC RE218823 Radar Sensor Kit (for UK only).

EPDC RE244407Radar Mounting Bracket KitNote: Required for Installation of Dual Beam Radar Sensor


EPDC RE21519 Implement Switch with 3m (10 Ft.) Harness.


The 9-pin implement feedback connector required forTouchSet depth control of implements is available as a field-installed attachment. The connector and wiring harness ena-bles a position input to be provided to the tractor’s Elec-tronic Selective Control Valve (SCV) control unit onAutoPowr tractors, enabling TouchSet depth control func-tionality through the first SCV.

The feature allows the operator to adjust height and depth ofremote lift cylinders by using the TouchSet controls in thecab.

AG MANAGEMENT SOLUTIONS

Parallel TrackingGreenStar Parallel Tracking provides a unique, modularsolution for straight and curved-line tractor guidance, elimi-nating overlap and skipping. The operator can easily keeptrack of straight-line progress by occasionally glancing atthe GreenStar Display or by listening to audible tones.GreenStar Parallel Tracking system thereby allows for:

• Reduced overlap and skipping• Successful night-time operation• Operation through adverse weather conditions

Parallel Tracking kits are available from AMS Europe usingJDmint. Dealers are free to source the remaining GreenStarCommon Components and a subscription to the StarFireSF1 or SF2 differential correction signal required to form afunctional system through using existing customer-owneditems or by sourcing from AMS Europe and StellarSupportrespectively.

For further code details, please refer to the AMS Sales Man-ual and Price Pages.

AutoTrac Assisted Steering

The AutoTrac Assisted Steering System greatly enhancestractor utility by providing fully automated vehicle guidancealong successive parallel passes.

AutoTrac field kits containing all necessary hardware,brackets and the geofenced, platform-specific or genericAutoTrac KeyCard in a single bundle are available fromAMS Europe using JDmint. Dealers are then free to sourcethe remaining GreenStar Common Components (inclusiveTerrain Compensation Module) and a subscription to theStarFire SF1 or SF2 differential correction signal required toform a fully functional AutoTrac system by using existingcustomer-owned items or by sourcing from AMS Europeand StellarSupport respectively.


Field Doc

GreenStar Field Doc offers a simple way to record informa-tion on operations including tillage, seeding, spraying, ferti-lising and in applying manual or automatically variableinput rates required for modern farm documentation prac-tices. In addition, customers can also draw upon a simpleand highly accurate boundary measurement tool incorpo-rated into the Field Doc system.

Collected data is readily transferable to a home PC runningJDOffice or other approved desktop software to provide val-uable farm management information. Field Doc assists cus-tomers by:

• Optimising production.• Reducing administrative paperwork for effective farm

management.



EPDC RE588279-Pin Connector Implement Feedback.Required for TouchSet depth control. Only compatible with Codes 0994 and 0995.


JDLink

The innovative GreenStar JDLink system from AMS allowscustomers to optimise the true performance capabilities oftheir 8030 Series Tractor by collecting machine data formanagement purposes. Using mobile phone technology,JDLink continuously transmits signals from the tractor’sCAN Bus system to a central John Deere server where theinformation can then be made available to users via theJDLink website or through email, fax or SMS messaging.

JDLink field kits containing the Communications Controllerand Cab Hardware are available from AMS Europe throughJDmint. For information on the JDLink system and theappropriate tractor bundles required to form a fully func-tional JDLink system, please refer to the AMS Ag SalesManual and Price Pages.

ENGINE

Engine Block (Coolant) Heater

A 220 V engine block coolant heater is available to providequick, positive engine starting in cold conditions.

• Required where tractors are expected to be started attemperatures below -18 degree C (0 degree F)

CHASSIS & BRAKES

Air Brake Couple Kit - 3rd/Single LineA kit containing all of the necessary components to upgradethe factory installed 2 line Air Brake System to a 3 line AirBrake System.

Hydraulic Trailer Brakes

Hydraulic trailer brakes allow modulated braking of trailersequipped with hydraulic brake systems for safer and morecontrolled braking. The system utilises a delay valves thatactuates the trailer brakes immediately prior to tractor brak-ing:

• Connects directly to tractors hydraulic system.• Does not require a separate oil reservoir.

The attachment kit includes hydraulic trailer brake valve,coupler and installation hardware & instructions.


EPDC RE524692 Engine Coolant Heater (220 Volts).Kit is not CE Certified


CG AR223585 Air Brake Couple Kit - 3rd LineRequires coded 9010 - Air Brakes


EPDC RE231703Hydraulic Trailer Brake.Compatible with tractor fitted with and without Power Beyond.


TRANSMISSION AND PTO

Back-up Alarm

A Back-up Alarm is available to accommodate governmen-tal or industrial sales of the 8030 Series Tractors notequipped with pneumatic air brakes. The alarm soundswhenever the transmission is placed in reverse.

PTO Equipment

A kit, designed for 8030 Series Tractors allows converstionof a 1000rpm PTO shaft in a 540/1000rpm PTO shaft..

WHEELS AND BALLAST

Pick up Weight - 900 kg

The 900kg Big Pack 'Monster' weight provides customerswith convenient ballasting to optimise tractor performance.The weight can be quickly mounted onto the front weightsupport and, when equipped with an additional centrelinkbracket, also fits Cat. II / III front or rear 3-point hitches.

Pick up Weight - 1150kg

For additional front ballast the 1150kg “Monster” weightcan be added for simple and quick addition of ballast, the1150kg weight can be fitted directly to the base weight andwhen equipped with an additional Center link bracket it isalso compatible with the factory installed front hitch.


CG RE224298 Back-up AlarmIncompatible with Air Brake system.


EPDC RE218639

Conversion Kit from 44.5 mm (1-3/4 In.) 1000 rpm to 34.9 mm (1-3/8 In.) 540/1000 rpm PTO.Conversion for tractor equipped with Code 2418.

Order From Bundle DescriptionEPDC AL112166 Pick up weight, 900 kgEPDC AL113121 Center link bracket for pick up weight


Front Weight Set - Regular

The attachment kit includes 22 Quick Tatch weights, eachweighing 50 kg.

Front Weight Mounting Kits

Attachment hardware for installing front weights can beordered as follows. Two retainers, two washers and two cap-screws (as appropriate) are required.

Trailer Coupling Front Weight SetThe attachment kit includes 2 special coupling weightsweighing 50 kg each that can be used within a front weightpackage to create a trailer coupling. The total kit weighs 100kg.

Rear Wheel Weights

Rear wheel weights are available for optimum ballastingand can be mounted on either of the inner or outer sides ofthe heavy-duty cast rear wheels as desired. Weight carryingcapacities of the tyres must always be observed.

When mounting cast weights on the outside of the wheel, a75 kg weight should first be mounted. Up to three, 205 kgweights can then be added per side. The first 75 kg weight isrequired to allow clearance to the gear for the rack and pin-ion when changing tread settings. Mounting the 205 kgweights directly to the rear wheel otherwise requires remov-ing the weights when adjusting tread width.

Note: Mounting hardware required. See partscatalogue.

Order From Bundle DescriptionEPDC AL172542 Pick up weight, 1150kgEPDC AL113121 Center link bracket for pick up weight


EPDC AL71258Weight Set, 1100 kg in totalRequires Mounting Hardware - see following.


EPDC AR68810 Retainer Order 2 x AR68810

EPDC 24M7241 WasherOrder 2 x 24M7241

EPDC 19H1926Capscrew for mounting 4 suitcase weightsOrder 2 x 19H1926

EPDC R59761Capscrew for mounting 12, 16 or 20 suitcase weightsOrder 2 x R59761

Order From Bundle DescriptionEPDC AL119964 Weight Set, 100 kg

Order From Bundle DescriptionCG R167153 Rear Wheel Weight, 75 kg (Qty 2)CG R207782 Rear Wheel Weight, 205 kgCG R167151 Rear Wheel Weight, 645kg


Rims for Heavy Duty Cast Wheel

Customers utilising the Substitutable Rear Shipping Wheelsoption can source rims to mount on the Heavy Duty Casthub and centres supplied with the tractor.

• Allows for custom fitment of rear tyres• Tight fit hole and slot hole on both the disk-to-rim and

disk-to-axle centres the disc to rim.• Well suited for heavier draft applications.

The following rims are available for all models in observ-ance of restrictions offered ex-factory (Group 48:AutoPowr, 5-step front: rear, tyre capacities, etc). Unlessstated, rims have 76.2 mm offset.

Note:Tyre load carrying capacities must be observed.

Drive Wheel Hardware for Clamp-on Dual Usage

Hardware kits for the Heavy Duty Cast Rear wheels are tobe used when using clamp on duals:

• Provides extra clamping force for hub to axle.

Heavy Duty Dual Wheel KitOrder From Bundle Description

EPDC RE161991 Wheel Rim for fitment of 320/90R54 tyres


EPDC RE172896Wheel Rim for fitment of 380/90R50 tyres174.8 mm offset

EPDC RE175533 Wheel Rim for fitment of 480/80R46, 18.4R46 or 520/85R46 tyres

EPDC RE175484 Wheel Rim for fitment of 520/85R42 or 20.8R42 tyres

EPDC RE176460 Wheel Rim for fitment of 620/70R42 or 650/65R42 tyres

EPDC RE166180 Wheel Rim for fitment of 650/75R38, 710/70R38 or 650/85R38 tyres

EPDC RE175489Wheel Rim for fitment of 900/50R42 tyres0 mm offset



EPDC RE224262Wheel Rim for fitment of 710/70R42 tyres100 mm axle only

EPDC RE171973Wheel Rim for fitment of 800/70R38 tyres0 mm offset


CG AR219840Drive Wheel Hardware for Cast Wheel.Hardware for cast hub to be used when clamp-on duals are used.


For heavy duty applications, a kit is available that adds anadditional extension to the axle which permits the use ofaxle mounted dual wheels for draft and heavy duty applica-tions. Currently no kit or bundle is available however thefollowing list of parts is needed to attach dual wheels to theaxle of any 8030 series tractor.

HYDRAULICS

Selective Control Valve EquipmentTo enhance hydraulic performance and improve tractor pro-ductivity, the following kits are available for 8030 SeriesTractors.

Power Beyond

Many implements including manure spreaders, forage wag-ons, seeders and sprayers requiring hydraulic power areequipped with their own pressure and flow compensatinghydraulic valves to independently control oil flow. For theseapplications, the Power Beyond System can be equipped toprovide live hydraulic power independent of the tractor’sown SCV performance, ensuring adequate, controlledpower supply to the implement and optimising tractor per-formance when the supply is no longer needed.

The attachment kits include couplers, connecting hoses, dustcovers and installation hardware & instructions.

Hydraulic Motor Return

Hydraulic motor return kits allow the return of used hydrau-lic oil directly into the tractor’s sump, bypassing the remotecoupler and SCV. The kits are then ideal for use with imple-ments where minimal back pressure is desired, i.e. thoseequipped with hydraulic motors or where hitch valves withlift assist wheels are installed.

Two kit versions are available with either with single or dualreturn lines. The dual return line version includes a casedrain.

Order From Part No. Qty DescriptionEPDC R192506 2 Dual HubsEPDC R212196 2 Clamp Rings

EPDC R192511 2 Half Sleeve 120mm PinionNote: For 120mm axle

EPDC R192512 2 Half Sleeve 120mm KeyNote: For 120mm Axle

EPDC R192508 2 Half Sleeve 110mm PinionNote: For 110mm Axle

EPDC R192510 2 Half Sleeve 110mm KeyNote: For 110mm Axle

EPDC R193201 2 Hub Extension 254mmEPDC R52006 60 WashersEPDC R111434 60 Cap Screw MJ22x130EPDC R113692 20 Spacer (Hardened)EPDC R182940 4 Cap Screw Hex Socket HeadEPDC 34M7275 8 Pin SpringEPDC R51719 8 Spring

EPDC RE191201 2Wheel MW23Ax38 10 bolt 2 PositionNote: For 650/85R38 tyres

EPDC RE191206 2Wheel MW23Ax42 10 bolt 2 PositionNote: For 710/70R42 tyres


EPDC RE2385794th Remote Cylinder Control Valve with Breakaway Couplers and Armrest Control Lever

EPDC AR221648

5th Remote Cylinder Control Valve with Breakaway Couplers, Electronic Control Unit and Armrest Control Lever.Can also be used as SCV 4 on tractors equipped with a front hitch.5 SCV’s are not possible on tractors with a front hitch


EPDC RE231706

Power Beyond Coupler Kit.For use on tractors with and without hydraulic trailer brakes. Kit includes load sense, pressure and return couplers.


EPDC AR114664

Hydraulic Motor Return Kit, Multiple/Auxiliary Hitch Coupler/Sump Return KitFor use with hydraulic motor returns, hitch valve with lift assist wheels or Motor Drains/Sump Returns.


Low Stand-by Pressure Control KitHydraulic kit to prevent the main hydraulic pump fromoperating during engine start-up. Useful for seeding unitswith hydraulically driven motors.

Single-Lever Control (Joystick)The Single-Lever Control (Joystick) Kit allows operation ofthe tractor’s 3rd and 4th SCV’s with the Joystick, to providean additional means of raising/lowering implements, trailersor any other hydraulically powered implements.

The Joystick connects to the CommandArm and can be ena-ble/disabled through the CommandCenter.

• NOTE: When the Single Lever Control (Joystick) isenabled, the 3rd and 4th SCV paddle pot controls on theCommandArm will become disabled.

Additional Hydraulic Oil Reservoir KitTo provide additional hydraulic oil take-out capacity forpowering large hydraulically driven implements or to tiplarge trailers this additional reservoir will allow and addi-tional 18 litres of hydraulic oil to be added to the systemgiving a total of 58 litres of oil that can be withdrawn fromthrough the SCV’s before the SCV cuts off. The reservoir islocated underneath the rear axle housing (shown in red) andis moulded to create and integrated look to the tractor.

HITCH AND DRAWBAR

3 In 1 Hitch Equipment

To fulfil the future hitch equipment demands of customers, anumber of the 3 in 1 hitch design components are also avail-able for field installation. The 3-in-1 rails, auto couplingWagon Hitch, Piton Fix and Ball type hitches and the Regu-lar Cat 2 drawbar (see later) can be supplied.

Order From Bundle DescriptionEPDC RE221284 Low Stand-by Pressure Control Kit


CG AR243091

Single-Lever Control (Joystick) for CommandArmIncludes single lever control, wiring and bracket for CommandArmRequires 4 x SCV’s

Order From Bundle DescriptionEPDC AR255999 Hydraulic Oil Reservoir 18L

Order From Bundle DescriptionTBD 3 in 1 Hitch Rails.TBD Ball Hitch for 3-in-1 rails.TBD Piton Fix Hitch for 3-in-1 rails.AL160390 Wagon Hitch Kit (Automatic Coupling).


Pickup Hitch

The Pickup Hitch with Drawbar allows for fast one-manhitching of twin axle trailers or trailed implements requiringclose-coupled hitch points:

• Hydraulically coupled to first SCV and then controlledfrom within the cab via that SCV control.

The hitch includes both a Cat 2 drawbar and hook.

VANDALISM PROTECTION

Lockable Fuel Tank Cap

A lockable fuel filler cap can be equipped for pre-MY2005customers looking to gain additional protection against van-dalism and theft.

Door Lock Kit

Door lock kit provides individually keyed cabin door locksas a deterrent to vandalism and theft. The kit also aids in sat-isfying insurance policies where commonly keyed vehiclescannot be guaranteed cover against damage or theft.

Kit contains two handles with lock cylinders, four keysand installation instructions. Further spare keys can becut from the blank.

Battery Disconnect

Externally-mounted battery disconnect kit can be used bothto immobilise the tractor and prevent unintended use as wellas in avoiding battery draining from running monitors orradios.

Order From Bundle DescriptionTBD Pickup Hitch


EPDC RE211434Kit, Locking Fuel Cap.Included in base equipment for MY2005 tractors.

Order From Bundle DescriptionEPDC AL71345 Door Lock KitEPDC AL71350 Blank Key

Order From Bundle DescriptionEPDC AR255881 Battery Disconnect


STORAGE

Storage Container - 45 l

(6020 shown)

The 45 l Tool Storage Container can be mounted to either ofthe tractor’s base weight, its Quick Tatch weights (requiresTrailer Coupling Set) or the 900 kg Pick up Weight for con-venient storage of tools and implement equipment.

The volumous sheet metal storage container can carry up to45kg of gear and includes side handles for easy movementbetween machines. A quick lock pin secures the containerlid.


EPDC AL120005 Storage container, 45 lMax. 45kg payload

Documents

8030 Attachments 10-06 - Deere · Issue 10-2006 (RI, RII) ATTACHMENTS FOR FIELD INSTALLATION 8030 Series Tractors-5 Cigarette Lighter and Ash Tray Cigarette Lighter heat element and