2
TECHNICAL SPECIFICATION:PVC TRAFFIC CONES 750mm UT 5003 (WITHOUT REFLECTIVE SHEETING) UT 5004 (WITH SINGLE REFLECTIVE SHHETING) UT 5005 (WITH DOUBLE REFLECTIVE SHHETING ) 1. MAIN BODY 1.1 SHAPE, SIZES, WEIGHT and COLOR Shape: The traffic cone illustrated above is whole with its body and base, has a hook with handle on the top and the base with rectangular shapes. The corners and edges of the base are rounded. There are feets on the corners and edges of the base. There is reflective sheeting (single or double reflective sheetings) on the body. Its surface is flat and smooth. Owing to suitable shape, identical cones can be stacked easily. Dimensions: Height:(H) 750mm (excluding the handle), base: 385 mm (each of 4 sides) Weight: 3.0 ± 0.2 kg Color: Cone fluorescent is in red or orange color, UV-tempered. Reflective sheetings are in white color. 1.2 FUNCTIONAL PROPERTIES On the base of the cone, there are openings for the accumulated water to flow. Cone is made of flexible material, easily twisted and straightened , unbreakable. 1.3 MATERIAL PROPERTIES Raw Material is PVC, and has the following properties. MATERIAL PROPERTIES TEST METHOD UNIT VALUE Hardness Icı solvic pcc 152 shore A 90 ± 5 Density ASTM D 792 gr/cm³ 1,24 ± 0,1 Tensile stress at break Icı solvic pcc 160/67 kg/cm² ˃100 Resistance in %100 elongation Icı solvic pcc 160/67 kg/cm² ˃40 Elongation at break Icı solvic pcc 160/67 % ˃150 Üstün Baskı Tekstil Plastik Uluslararası Tic.A.Ş. Çakmaklı Mevkii Akçaburgaz Mah. 85. Sk. No: 8 34522 Esenyurt - İstanbul TURKIYE Tel : +90 2123255544 Fax : +90 2123255540 [email protected] www.ustunas.com Page 1/2

75 Cm Traffic Cones

Embed Size (px)

DESCRIPTION

75 Cm Traffic Cones

Citation preview

  • TECHNICAL SPECIFICATION:PVC TRAFFIC CONES 750mm

    UT 5003 (WITHOUT REFLECTIVE SHEETING) UT 5004 (WITH SINGLE REFLECTIVE SHHETING)

    UT 5005 (WITH DOUBLE REFLECTIVE SHHETING ) 1. MAIN BODY

    1.1 SHAPE, SIZES, WEIGHT and COLOR

    Shape: The traffic cone illustrated above is whole with its body and base, has a hook with handle on the top and the base with rectangular shapes. The corners and edges of the base are rounded. There are feets on the corners and edges of the base. There is reflective sheeting (single or double reflective sheetings) on the body. Its surface is flat and smooth. Owing to suitable shape, identical cones can be stacked easily.

    Dimensions: Height:(H) 750mm (excluding the handle), base: 385 mm (each of 4 sides)

    Weight: 3.0 0.2 kg Color: Cone fluorescent is in red or orange color, UV-tempered. Reflective sheetings are in white color.

    1.2 FUNCTIONAL PROPERTIES

    On the base of the cone, there are openings for the accumulated water to flow. Cone is made of flexible material, easily twisted and straightened , unbreakable.

    1.3 MATERIAL PROPERTIES

    Raw Material is PVC, and has the following properties.

    MATERIAL PROPERTIES TEST METHOD UNIT VALUE Hardness Ic solvic pcc 152 shore A 90 5 Density ASTM D 792 gr/cm 1,24 0,1 Tensile stress at break Ic solvic pcc 160/67 kg/cm 100 Resistance in %100 elongation Ic solvic pcc 160/67 kg/cm 40 Elongation at break Ic solvic pcc 160/67 % 150

    stn Bask Tekstil Plastik Uluslararas Tic.A.. akmakl Mevkii Akaburgaz Mah. 85. Sk. No: 8 34522 Esenyurt - stanbul TURKIYE Tel : +90 2123255544 Fax : +90 2123255540 [email protected] www.ustunas.com

    Page 1/2

  • Raw Material is resistant to natural weather conditions between -20 C and +60 C,

    1.4 PRODUCTION METHOD Cone, as a whole part with its base is manufactured by plastic injection method

    1.5 PACKAGING

    In strong carton boxes, each box contains 10 cones.

    2. REFLECTIVE SHEETING

    2.1 PERFORMANCE SPECIFICATION

    2 pcs micro-prismatic polymeric PVC film on the cone is attached. The table below shows the performance characteristic

    2.2 REFLECTIVE PROPERTIES

    * Reflective total thickness: 500 10mikron * Reflective weight: 560 10 gram/m2

    Angle of observation Angle of entry Degree of reflection cd/lx/m2

    0,2 -4 210

    Page 2/2