50303906A HDGI-N31NPV2S9D Nobrandeng.hitron.co.kr/wp-content/uploads/2016/07/HDGI-N31NPV2... · 2017. 4. 27. · plastic dome camera hdgi-n31npv2s9d/nobrand production release & revision

2.MATERIAL:

3.COLOR: BLACK

14

8+

/-5

)mm

Full HD Dome Camera

3-AXIS INFRARED-LEDPLASTIC DOME CAMERA

HDGI-N31NPV2S9D/NoBrand

PRODUCTION RELEASE & REVISION

REV DESCRIPT’N/BUYER DWG No PARTS No. BY CHK DATE

TITLE

SIZE REV.

SCALE

MATERIAL

UNLESS OTHERWISE SPECIFIEDALL DIMENSIONS ARE IN MM.- TOLERANCE LABEL +/- 3 MANUAL +/- 5 GUIDE +/- 5

COLOR

DATE

DRAWN

CHKED

APPROVALS

PARTS LIST

DESCRIPTION/MATERIALITEM QTY

A4DO NOT SCALE

2

2

3

전자

105(+/-5)mm

J.Y.LIU

M.J.KWON

50303906

A

강영구

M.J.KWON 15-04-15

15-04-15 15-04-15

K.H.JUNG

Instruction Manual

15-04-15

15-04-15

50303906

Full HDDome Camera

Instruction Manual

2

FCC COMPLIANCE STATEMENT

CE COMPLIANCE STATEMENT

CAUTION : Changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

WARNING : This is a Class A product. In a domestic environment this product may cause

radio interference in which case the user may be required to take adequate measures.

FCC INFORMATION : This equipment has been tested and found to comply with the limits

for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in accordance with the instruction

manual, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in which case the user

will be required to correct the interference at his own expense.

1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions.

5.. Do not block any ventilat ion openings. Install in accord ance with the manufacturer`s

instructions. 6. Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce heat. 7. Only use attachments/accessories specified by the manufacturer. 8. Use only with the ca rt, stand, tripod, bracket, or table specified by

the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid

injury from tip-over.

9. CAUTION - THESE SERVICING IN STRUCTIONS ARE FOR USE BY QUALIFIED SERVICE PERSONNEL ONLY. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING OTHER THAN THAT CONTAINED IN THE OPERATING INSTRUCTIONS UNLESS YOU ARE QUALIFIED TO DO SO.

10. Use satisfy clause 2.5 of IEC60950-1/UL 60950-1 or Certified/Listed Class 2 power source only.

11. Indoor use only.

EXPLANATION OF GRAPHICAL SYMBOLS

IMPORTANT SAFETY INSTRUCTIONS

3

4

5

6

7

8

10

21

20

VIDEO OUT CHECK

CONTENTS & PACKAGE 6

BASE INSTALLATION

8

8

LENS ADJUSTMENT

DC AUTO IRIS LENS

5

The 1/2.8" 2.4M HD CMOS camera, especially for closed circuit televisionCCTV and security surveillance application.

1/2.8"

30 EA, 850nm IR LED

Auto and manual white balance modes (ATW/AWC/Manual/AWB)

3

HSBLC

DWDR

4

BLC (Back-light compensation)

25/30 fps @ 1080p

30

6

(IR Model 5 Watts)

Switch Cable : -Green & Black : open -> AHD signal BNC output

-Green & Black : short -> CVBS signal BNC output

BNC connector used to connect the camera to a DVR, etc.

7

8

9

1/2.8" CMOS

2.8 - 12mm

2.8mm : 109˚12mm : 37.8˚

WHITE BALBACKLIGHT

SENS-UP

D-WDR

<WHITE BAL>

OFFBLCHSBLC

<BACKLIGHT>

ATWAWC->SETINDOOROUTDOORMANUALAWB

<DAY&NIGHT>

SHARPNESSLSCD-EFFECTRETURN

CAM TITLEMONITORVIDEO OUTLANGUAGECOMETRETURN

<EXIT>

SAVE& ENDRESET

DEFECT DETNOT SAVE

10

11

MAIN MANU

LENSEXPOSUREBACK LIGHTWHITE BALDAY&NIGHTIMAGEFUNCTIONSYSTEMEXIT

DC

OFFATWAUTO

SAVE&END

MAIN MANU


MANUAL

OFFATWAUTO

SAVE&END

1)

2)

< EXPOSURE > MODE

1/50000, x2 ~ x30

Adjust the Auto Gain Control level. ▶ 0 - 15AGC

3) SENS-UP Select the Digital Slow Shutter level. ▶ OFF, AUTO (x2 ~ x30)

BRIGHTNESS Adjust the BRIGHTNESS level. ▶ 0 - 100

D-WDR

DEFOG

Select the Digital WDR.▶ AUTO, ON(level 0~8), OFF

AUTO, OFF

POS/SIZEGRADATION

DEFAULT

Adjust the window position & size▶ 0~2

Initialize the setting values

SHUTTERAGCSENS-UPBRIGHTNESSD-WDRDEFOGRETURN

AUTO|▪▪▪l▪| 11AUTO|▪▪l▪▪| 48OFFOFFRET

MAIN MANU


DC

OFFATWAUTO

SAVE&END

The EXPOSURE menu is used to set the automatic light control method for the camera. It provides the ability to adjust the SHUTTER speed, AGC, SENS-UP, BRIGHTNESS, D-WDR,and DEFOG functions of the camera.

Select the DC iris speed ▶ 0~15

▶ INDOOR, OUTDOOR

12

BACKLIGHT

The BACKLIGHT menu is used to the ability to prevent back lighting from the image.

1)BLC Prevents such a back light effect to secure a clear image under All illuminationenvironments.Adjust the size of Back Light Compensation area.

2)HSBLC Mask the high light zone with specific color & level.

Adjust the window position & sizeAREA

Initialize the setting valuesDEFAULT

Select the HSBLC area ▶ AREA1 - AREA4SELECT

Adjust the HSBLC area window position & sizeDISPLAY

Select the HSBLC level 0 ~ 100▶ LEVEL

All Day, NightMODE

Initialize the setting values.DEFAULT

HLBLC

SELECTDISPLAYBLACK MASKLEVELMODEDEFAULTRETURN

AREAONON|▪▪l▪▪| 30ALL DAY

RET

< BACKLIGHT >

BLC

LEVELAREADEFAULTRETURN

MIDDLE

RET

Select the BLC gain ▶ Low, Middle, HighLEVEL

Select the BLACK MASK ON, OFF▶ BLACK MASK

MAIN MANU


DC

OFFATWAUTO

SAVE&END

13

WHITE BALANCE

The screen color can be adjusted by using the Auto White Balance function.It compensates for deviations in the white color caused by changes in the color temperature of the light source so that the colors are reproduced correctly.

1)ATW

2)AWC->SET

3)INDOOR

4)OUTDOOR

5)MANUAL

Automatically adjust color temperature.

Automatically readjust only by pressing AWC→SET.

Set the color temperature to 3200°K

Set the color temperature to 6300°K

Manual mode. User can change Red and Blue gain value manually.

BLUE

RED

0 ~ 100

0 ~ 100

6)AWB Automatically extended range of color temperature adjustment.

MANUAL

BLUEREDRETURN

| I | 50|▪▪I▪▪| 50RET

▪▪ ▪▪

< WHITE BALANCE > MODE

MAIN MANU


DC

OFFATWAUTO

SAVE&END

14

.

CDS

IR SMART LEVEL 1~15 AREA Adjust the window position & size.

DAY&NIGHT mode are changed according to the brightness of the image.Use only when the camera is installed in a dark place but the camera is viewing a bright place. When used in a normal installation, hunting may occur.

< DAY&NIGHT > MODE

D&N AUTO

D N (CDS)D N (DELAY)N D (CDS)N D (DELAY)RETURN

| | 206|▪I▪▪▪| 3|▪▪▪I▪| 180|▪I▪▪▪| 3RET

▪▪▪I▪

B&W

IR SMARTRETURN

ONRET

MAIN MANU


DC

OFFATWAUTO

SAVE&END

The DAY&NIGHT menu is used to configue the day and night related setting for the camera.

15

The IMAGE menu provides the ability to adjust the SHARPNESS, LSC and D-EFFECT functionsof the camera.

1) SHARPNESS Adjust the SHARPNESS level. ▶ OFF, AUTO (0 - 10)2) LSC Select the lens Lens Shading Compensation. ▶ ON, OFF3) D-EFFECT FREEZE Select real or still mode ▶ ON, OFF

MIRROR Select OFF, MIRROR, V-FLIP, ROTATE NEG. IMAGE Select Negative image mode ▶ ON, OFF

IMAGE


AUTOOFF

RET

MAIN MANU


DC

OFFATWAUTO

SAVE&END

< SHARPNESS >

IMAGE


AUTOOFF

RET

SHARPNESS

LEVELSMART AGCEND AGCRETURN

|▪▪I▪▪| 5|▪▪▪I▪| 128|▪▪▪I▪| 160RET

< D-EFFECT >

IMAGE


AUTOOFF

RET

D-EFFECT

FREEZEMIRRORNEG. IMAGERETURN

OFFOFFOFFRET

16

1) DNR 2D3D

Select Digital Noise Reduction.▶ OFF, LOW, MIDDLE, HIGH▶ OFF, LOW, MIDDLE, HIGH

2) MOTIONSELECTDISPLAYSENSITIVITY

Detects the Motioned Object in the image. ▶ ON, OFF

ALARM

DEFAULT

Select the Motion area ▶ AREA1 - AREA4Adjust the Motion area window position & sizeAdjust the Motion sensitivity level ▶ 0 - 100

Select the Motion alarm


3) PRIVACYSELECTDISPLAY

COLOR

Hide an area you want to hide on the screen.

TRANSDEFAULT

Select the privacy zone ▶ AREA1 - AREA4Adjust the Privacy window type, position & size▶ OFF, INV., MOSAIC, COLORSelect the privacy zone color ▶ WHITE - USER


4) DEFECT DETLIVE DPC

WHITE DPC

START

Compensates for bad pixels.

LEVELAGC

Select the Live DPC mode ▶OFF, ON

Select the White DPC mode ▶ OFF, ON

Start the white pixels correction

Select the White DPC level ▶ 0 - 60Select the AGC Level ▶ 0 - 14

SENS-UP Select the Sens-up level ▶ x2 - x30

< >FUNCTION

DPC VIEW ▶ OFF, ON

POS/SIZE Adjust the White DPC area window position & size

BLACK DPC Select the Black DPC mode ▶ OFF, ON

START

LEVEL

Start the Black pixels correction

Select the Black DPC level ▶ 0 - 100DPC VIEW ▶ OFF, ON

POS/SIZE Adjust the Black DPC area window position & size

COLOR Select the motion area color ▶WHITE - Red, Green, BlueTRANS Select the motion area transparency.▶1.0, 0.75, 0.5, 0.25

and

VIEW TYPE Select view type of the Motion area ▶ OFF, BLOCK, OUTLINE, ALLOSD VIEW Select the Motion OSD view ▶ OFF, ONTIME Select the Motion Alarm time ▶ 1 - 15

Select the privacy zone transparency ▶ 1.0, 0.75, 0.5, 0.25

AGC LEVEL Select the AGC level ▶ 0 - 255LEVEL Select the Live DPC level ▶ 0 - 100

FUNCTION

DNRMOTIONPRIVACYDEFECT DETRETURN

OFFOFF

MAIN MANU


DC

OFFATWAUTO

SAVE&END

17

<DNR>

<MOTION>

DNR

2D3DRETURN

MIDDLEMIDDLEOFF

FUNCTION


OFFOFF

RET

FUNCTION


OFFOFF

RET

< >PRIVACY

PRIVACY

SELECTDISPLAYCOLORTRANSDEFAULTRETURN

AREA1COLORWHITE1.0 RET

FUNCTION


OFFOFF

RET

< >DEFECT DET

DEFECT DET

LIVE DPCWHITE DPCBLACK DPCRETURN

ONONOFF RET

FUNCTION


OFFOFF

RET

MOTION

SELECTDISPLAYSENSITIVITYCOLORTRANSALARMDEFAULTRETURN

AREA1ON |▪I▪▪▪| 10WHITE1.0

RET

DEFECT DET


ONONOFF RET

LIVE DPC

AGC LEVELLEVELRETURN

|▪I▪▪▪| 4|▪I▪▪▪| 2RET

WHITE DPC

POS/SIZESTARTDPC VIEWLEVELAGCSENS-UPRETURN

OFF|▪▪▪▪| 4|▪▪▪▪| 14X2RET

DEFECT DET


ONONON RET

BLACK DPC

POS/SIZESTARTDPC VIEWLEVELRETURN

OFF|▪▪▪▪| 100RET

CLOSE THE IRISTHEN

PRESS ENTERWAITING...

18

SYSTEM

The IMAGE menu provides the ability to adjust the CAM TITLE, RS485, MONITOR, CVBS CROP, VIDEO OUT, LANGUAGE and VERSION functions of the camera.

1) CAM TITLE Maximum of 15 characters are allowed.

2) MONITORLCD

BLUE GAIN

Select the Monitor type ▶ LCD, CRT

RED GAINGAMMA

Adjust the Blue gain level ▶ 0 - 100Adjust the Red gain level ▶ 0 - 100Select the gamma level ▶ USER, 0.45 - 1.0

CRTBLUE GAINRED GAINGAMMA

Adjust the Blue gain level ▶ 0 - 100Adjust the Red gain level ▶ 0 - 100Select the gamma level ▶ USER, 0.45 - 1.0

4) VIDEO OUT Select the video out type ▶ NTSC, PAL

5) LANGUAGE OSD menu LANGUAGE (16ea) ▶ ENGLISH etc.

6) COMET Select the COMET function ▶ OFF, ON

< >SYSTEM

< >CAM TITLE

CAM TITLE

0 1 2 3 4 5 6 7 8 9A B C D E F G H I J KL M N O P Q R S T U VWXYZ▶ → ← ↑ ↓ ()¯ － _■ /=& : ~ , .

← → CLR POS END_ _ _ _ _ _ _ _ _ _

SYSTEM


OFFLCD NTSCENGLISHOFFRET

MAIN MANU


DC

OFFATWAUTO

SAVE&END

SYSTEM



19

< >MONITER

LCD

GAMMARED GAINBLUE GAINRETURN

USER|▪▪|▪▪| 69|▪▪|▪▪| 60RET

EXIT

The EXIT menu provides the ability to adjust the RESET, SAVE & END and NOT SAVE functionsof the camera.

1) EXITRESET Factory initialization of camera settings

SYSTEM



SAVE & END Save and exit menuNOT SAVE Exiting the menu without saving

20

760g146x 106mm(H)

f=2.8 ~ 12mm F1.2 ~ 360 Varifocal Lens, ICR (D&N)

Fixed mount

BNC Connector - AHD, CVBS

LIVE DPC / WHITE DPC / BLACK DPC

CRT / LCD

NTSC / PAL

Video out

Monitor

D-Effect OFF / FREEZE / MIRROR / NEG.IMAGE

Privacy MaskingMotion Detection OFF / ON (4 zone)

LSC (Shading) OFF / ON

Camera Title OFF / ON

OFF / LOW / MIDDLE / HIGH

D-WDR OFF / ON / AUTO

SENS-UP1 ~ 15

1 ~ 100

MAX 4.8 Watts (400mA)

1/2.8" 2.4M Sony CMOS

2000(H) x 1121(V)

1920(H) x 1080(V)

1000 TVL

BNC(AHD high definition video output /CVBS(srarted definition video output)

AUTO, 1/60, FLK ~ 1/50,000 sec

OFF / AUTO (x2, x4, x6, x8, x10, x15, x20, x25, x30)

DC 12V ± 10%

DC Jack

Full HD CAMERA

OSD (Joystick Switch, coaxial communication)

1920x1080@25fps ; 1920x1080@30fpsVideo Frame Rate

Exposure

OFF / BLC / HSBLCOFF / AUTO

BacklightATW / AWC / INDOOR / OUTDOOR / AWBWhite Balance

DNR 2DNR3DNR OFF / LOW / MIDDLE / HIGH

OFF / ON (4 zone)ENG / CHN1 / CHN2 / GER / FRA / ITA / SPA / POL / RUS / POR / NED / TUR / KOR / JPN / HEB / ARB

OFF / AUTO (0 ~ 10)

COMET OFF / ONSave & Exit SAVE & EXIT / NO SAVE / RESET

Over 500m via 75-3 coaxial cableTransmission Distance

CVBS Resolution

Sync. System

Scanning system

Active Pixels

Total Pixels

Image sensor

Power Consumption

Power Source

MODEL

Power

General

Min. illumination

Video Output

1.0 lux(COLOR), 0 lux(BW, IR LED ON)

30 IR LED(850nm)30M

More than 50dB (AGC off)

Distance

IR LEDIR

S/N Ratio

Camera Control

Shutter

AGC

Lens

Function

Brightness

Day & Night

Defog

Language

Video mode

SharpnessDefect Detection

Power input

Lens mountLensOperating temperatureOperating humidity

WeightExternal dimension

Connector&

etc.

DC / MANUAL

AUTO / COLOR / B&W

0 ~ 96% (non-condensing)

IP66Ingress Protection

50303906A

2.5

1.67lb. (760g)

2.20lb. (1.0kg)

Documents

50303906A HDGI-N31NPV2S9D Nobrandeng.hitron.co.kr/wp-content/uploads/2016/07/HDGI-N31NPV2... · 2017. 4. 27. · plastic dome camera hdgi-n31npv2s9d/nobrand production release & revision