suction-drainers combination suction-drainers combination with prechamber with collecting basin (50 litres)

Article 46064 46065 46114 46115 46116 46215

Tank capacity 65 65 115 115 115 115Max draining capacity 52 52 97 97 97 97Prechamber capacity - - - - 8 -Bowl capacity 14 14 14 14 14 50Air pressure for depressurisation - 6,5 - 7 - 6,5 - 7 6,5 - 7 6,5 - 7Depressurisation time - 2 - 3 - 3,5 3 - 3,5 3 - 3,5Noise level - 75 - 75 75 75Suction speed - 1,5 - 2 - 1,5 - 2 1,5 - 2 1,5 - 2Total suction capacity - 43 - 45 - 85 - 90 85 - 90 85 - 90

Discharging/suction hose 2 2/2 2 2/2 2/2 2/2Max pressure for draining 0,5 0,5 0,5 0,5 0,5 0,5

Set of probes - 45560 - 45560 45560 45560Packing 3 - 0,247 4 - 0,310 3 - 0,360 4 - 0,420 4 - 0,420 4 - 0,5Weight 38,2 42,7 51 54 58 68

Dimensions (A - B - C) 57 - 49 - 100 57 - 49 - 100 65 - 58 - 150 65 - 58 - 150 65 - 58 - 150 70 - 62 - 156Max dimensions (D) 200 200 240 240 240 255

Air-operated combination suction-drainer (50 litre) with pantograph collection bowl and wheel-mounted 115 litre tank. Waste oil can be collected whether by gravity, using the recovering basin on the floor or in the upper position if vehicles are over car lift, or by suction through the supplied probes. After depressurisation the drainer works independently without requiring continuous connection to the compressed air systemSuck hot oil at 70 - 80 °C

PANTOGRAPHwaste oilsuction-drainers

C

B

A

Caution: do not suck brake fluids, fuels, flammable or corrosive liquids

D

The collection tank can be placed on the floor

or raised under an auto lift by means of the

cantilever arms

litres

litreslitreslitres

barmindB

l/minlitres

mbarArt.

N° - m3

kgcm cm

48

moto and cars

Details and advantages

Protection screen/filtersplash guard and support base for filter

Tank with antisplash

The air pressure for correctdepressurisation is

between 6,5 and 7 bar

To empty the tank with device already depressurised, open the bowl/tank connection cock and in a few seconds the oil will be

sucked in the tank

suction-drainers combination suction-drainers combination with prechamber with collecting basin (50 litres)

Article 46064 46065 46114 46115 46116 46215

Tank capacity 65 65 115 115 115 115Max draining capacity 52 52 97 97 97 97Prechamber capacity - - - - 8 -Bowl capacity 14 14 14 14 14 50Air pressure for depressurisation - 6,5 - 7 - 6,5 - 7 6,5 - 7 6,5 - 7Depressurisation time - 2 - 3 - 3,5 3 - 3,5 3 - 3,5Noise level - 75 - 75 75 75Suction speed - 1,5 - 2 - 1,5 - 2 1,5 - 2 1,5 - 2Total suction capacity - 43 - 45 - 85 - 90 85 - 90 85 - 90

Discharging/suction hose 2 2/2 2 2/2 2/2 2/2Max pressure for draining 0,5 0,5 0,5 0,5 0,5 0,5

Set of probes - 45560 - 45560 45560 45560Packing 3 - 0,247 4 - 0,310 3 - 0,360 4 - 0,420 4 - 0,420 4 - 0,5Weight 38,2 42,7 51 54 58 68

Dimensions (A - B - C) 57 - 49 - 100 57 - 49 - 100 65 - 58 - 150 65 - 58 - 150 65 - 58 - 150 70 - 62 - 156Max dimensions (D) 200 200 240 240 240 255

49

cars trucks

50

Aticle with seals in 33125

Aticle with seals in 33550

Ratio 1:1 1:1

Capacity 40 23Pump 33/2011NHHV2 33070Flexible suction tube 2 m 38026 38026Air inlet flowregulator 37803 37803

Wall bracket 33590 33115Packing 1 - 0,030 1 - 0,029Weight 14 8,4

Distance (A) 150 150

Wall-mounted transfer kit. A practical solution for drainingmovable equipment, waste oil suction/drainers by means ofconnection with quick-coupling valve. Wall application enables connection to a fixed system for discharging the sucked liquid directly into the storage tank.

VITON

NBR

l/min

Art.Art.

Art.

Art.N° - m3

Kgcm

Modular kit for TRANSFER or EMPTYINGoil, waste oil and similar

A

Art. 33119

Art. 33127

Art. 33127

Art. 33118

To connect waste oil drainers with above mentioned emptying kit it is necessary to mount a male quick coupler. Depending on the kind of waste oil drainers (standard, for pit or floor mounted) a different nipple must be used as shown in the examples (Pic. 1 - 2 - 3).

1 Pit waste oil drainer

2 Floor waste oil drainer

3 Standard waste oil drainer

Art. 33134 Female quick coupler and nipple to connect pump suction hose with waste oil drainers. In their turn drainers must be equipped with male quick coupler.

Art. 33134

Art. 33127

Art. 33118

D

Wheel-mounted waste oil drainers. Ideal for use with jerry cans, drums and containers of various sizes, up to 220 kg. Suitable for gravity draining of engine, gearbox and differential oil from all motor vehicles placed on an car lift or pit.The height-adjustable bowl (15 litres) is mounted on a swivel joint that facilitates positioning.

A

total operating range of bowl 780 mm

ø bowl 580 mm

C

B

Details and advantages

In addition toserving as a filter,

the antisplash screen is also a

useful support for draining the filters

just changed

adjustable bowl wheel-mounted wheel-mounted

Article 42004 42050 42000

Trolley capacity - 20 - 60 180 - 220trolley - 80050 80200Bowl capacity 15 15 15Antisplash screen yes yes yesDrum clamping ring yes yes yes

Packing 1 - 0,350 2 - 0,120 2 - 0,150Weight 9 17 29

Dimensions (A - B - C) 58 - 58 - 115 64 - 50 - 120 70 - 77 - 130Max dimensions (D) 115 180 180

litres

Art.litres

N° - m3

kgcm cm

Caution: do not use with flammable or corrosive liquids

Antisplashscreen

Adjustable bowl to increase

operating range

Removable oversize funnel

Oil valveon collection

bowlHeight-adjustable

ring

Waste oildrainersfor DRUM

51

15 litre adjustable bowl