Productivity in Maintenance Operations
A fast-curing, easy to apply method to repair torn and
damagedconveyor belts
Available in 400g or 800g kits Cures in 90 minutes @ 25C
Requires no special tools Belts repaired in place Extended belt
life
Kit contains: Resin Parts A & B Primer Cleaning Cloths
Instructions
1. Prepare surface (cleaning, abrading, wipewith cleaning
cloths)2. Apply primer (if necessary*)3. Mix Resin Parts A &
B4. Apply to area of repair* Polyurethane, Hypalon, PVC, or Nitrile
rubber do not require primingSee reverse for technical
information
TECHNICAL DATAOperating temperature: - 10C to 80C Resin should
be at room temperature (max 30C) prior to
applying. If temperature is below 15C, mix resin until it feels
warm.Working time: Paste forms 1 minute after mixingPot Life: 5
minutes after mixing (@ 25C)Cure time: Cures in 60 minutes @ 35C,
90 minutes @ 25CCoverage area: BR17 400g 350cm3
BR17 800g 630cm3 Hardness: 70 to 80 Shore AStorage: Store in a
dry place at under 40C
Shelf life of 6 months
FEATURES Easy to use 2-part system Inclusive kit Cures in 90
minutes @ 25C
ADVANTAGES Requires no special tools Belt repaired in place
Specialized distribution for easy ordering Flexible and abrasion
resistant
BENEFITS Reduced downtime Prolonged belt life
Note: Scotchflex BR17 is not suitable for splicing conveyor
belts.
Use BR17 with 3M Scotch-Seal Polyurethane Sealant DP-5001 as
part of acomplete conveyor belt maintenance programme.
3M MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, STATUTORY OR
OTHERWISE, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTYOR
CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR
COURSE OF PERFORMANCE OR USAGE OF TRADE. User isresponsible for
determining whether the 3M product is fit for a particular purpose
and suitable for users method of use or application. Given the
variety offactors that can affect the use and application of a 3M
product, some of which are uniquely within the users knowledge and
control, it is essential that the userevaluate the 3M product to
determine whether it is fit for a particular purpose and suitable
for users method of use or application.
For more information contact 3M MiningPhone: 1-519-452-6765 x
2249Fax: 1-519-452-6286e-mail: [email protected] or visit
www.3M.com/mining/BR17
33M Mining
P.O. Box 5757London, Ontario, CanadaN6A 4T1
3M, Scotchflex and Scotch-Seal are trademarks of 3M. Used under
license in Canada.0310 CP 18295-E
