300kVA Resistive-Reactive Compact Load Bank

With over 30 years of load bank manufacturing, Crestchic support their load banks of varying sizes and age across the world.

Our 300kVA Resistive-Reactive compact load bank, operating at 480V-208V 60Hz, is suitable for simulating a lagging power factor, which is vital for the ease of commissioning multiple generators synchronised on a common bus. Its unique compact size and low weight makes it an ideal solution for projects where easy transportation between sites is required or difficult access is an issue. Featuring three different control options, accurate load can easily be applied and monitored.

300kVA Resistive/Reactive Load Bank

� 300kVA Resistive/Reactive variable power factor

� 480V - 208V @60Hz

� Compact dimensions: 5’ x 3’4” x 5’5”H, weighing less than 3,550lbs

� Easily transported between jobsites and no tractor trailer necessary

� Easy to operate: Three different control options, inc: Integrated control – the kW & kVAr move under control proportionately with each other

� Eclipse PC control if required (reports and data acquisition) see controls overleaf

� Parallel with your other Crestchic Load banks to easily increase your capacity with one controller

� Available immediately for rental

www.crestchic-usa.com

ENHANCED CONTROLS – Microprocessor Based (MCS)

� LC60 Handheld: A ruggedized field controller suitable for all MCS-controlled load banks with IP67 connection points. It provides robust control up to 100m, with basic instrumentation display, pre-set load programmes and motor start facility. Includes the option of manual control. The LC60 comes with an IP65 daylight viable screen for outdoor operation.

� Eclipse Software: Our state-of-the-art software is ideal for more complex testing scenarios where accurate, real-time data capture and ultra-precise control of one or more load banks in a familiar windows environment is preferred. Can also be controlled manually.

� Modbus Interface: A Modbus over industrial ethernet using TCP-IP protocol interface is available on all MCS-controlled load banks for easy integration in to the client’s own system.

Crestchic Product Overview

AC Resistive OnlyLoad Banks

AC Resistive-Reactive Load Banks

Medium VoltageLoad Banks

� 1000kW - 7000kW � 380V - 690V Range � Lloyds Register Approved

10 & 20 foot ISO Containers

� 1000kVA - 62500kVA � 380V - 690V Range � Lloyds Register Approved

10 & 20 foot ISO Containers

� 1000kVA to 2500kVA @0.8pf and up to 5000kW @1.0pf

� Load bank and transformer in one ISO container

� Reduced footprint � Voltages to 36kV

About Crestchic

� Global locations

� Over 30 years’ load bank manufacture

� Over 150MVA available worldwide

� Operating in all seven continents

For further information contact:CRESTCHIC INC USA,235 Sweet Spring Rd,Glenmoore, PA, 19343.United States of America

T: (610) 458-8182E: Rental-USA@crestchic.comE: Sales-USA@crestchic.comwww.crestchic-usa.com

The information given in this literature is, to the best of our knowledge, correct at the time of going to print. However, Crestchic is constantly looking at ways of improving their products and services and therefore reserve the right to change, without prior notice, any of the data contained in this publication. Any orders placed will be subject to our Standard Conditions of Sale, available on request. Crestchic is part of the NBI group of companies.

Copyright © 2017 – Crestchic Limited