Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
DARNELL-ROSEdivision evans Industries, Inc.
26
Dual-Wheel Industrial
Load Capacity: 200 to 400 lbs.
An exceptionally strongdual-wheel caster for
applications where heavy loadcapacity, low overall height, and floor
or carpet protection is required.Each wheel rolls independentlyfor easy swiveling under heavy,
low profile loads.
Used extensively on:
• Computer Frames
• Electronic Enclosures
• Copy Machines
• Disk Storage Devices
• Display Racks
• Airport Terminal Stands
No other low profile caster matchesthe strength and performance of the 30 series. Available in either standard bright zinc or optional
black oxide finishes.
SERIES
Wheel SelectionWheel Selection
Ball Bearings(ø.250 Upper Race)
Upper Raceway(Top Cap)
King Pin(Rivet)
Retaining Washer(Reinforcing Washer)
Top Plate
Yoke
Holes for5/16" Bolts
Lower Raceway(Ball Retainer)
Ball Bearings(ø.187 Lower Race)
Dust Cap
ø.500
.187
SWIVEL
RIGID
FOUR SIDED DOUBLE BALL BEARING RACEWAY30 SERIES
SERIES Quality Features• FOUR-SIDED, DOUBLE BALL RACEWAY.
Hardened steel ball bearings touch upper andlower swivel raceway “on all four sides.” Thisprotects the pin from shock loading for freeswiveling under heavy loads.
• HEAT-TREATED MOVING PARTS.All moving parts are hardened to a precise molecular depth and Rockwell hardness. Thisextends caster life under rugged conditions andshock loads.
• RACEWAY DUST CAP. Dust cap protects the raceway from contamination by dust, dirt, moisture,
and other environmental debris.• LOW OVERALL HEIGHT.
Heavy loads are supported by two wheelsthat roll independently to assure easy maneuver-ability in applications where a low profile isrequired.
Options• Thumb-Style Wheel Brake
• Conductive or Static-Dissipative Wheels
• Gray, Non-Marking Wheels
• Power Coated or BlackOxide Finishes
• Maintenance-Free SwivelBearings
3030
NEOPRENE RUBBERPAGE 108
HI-CAP NEOPRENEPAGE 110
DONUT-STYLE NEOPRENEPAGE 114
27
ALTERNATES3-5/8"
2-7/8 to 3"
1-3/4"
2-1/2"
SlottedHoles for5/16" Bolts
4"3"
3" 4"
Holesfor5/16" Dia.Bolts
STANDARD
Dimension D
*1/2"5⁄8"*3⁄4"7⁄8"1"
Dimension L
1-1/2"2"2"2"
2-1/2"
Stem Number
O-12-112O-58-2O-34-2O-78-2O-1-212
Dimension T
1/2"-131/2"-135⁄8"-11*5⁄8"-113/4”-103/4”-103/4”-10
Dimension L
1-1/2"2"2"
2-1/2"1-1/2"
2"2-1/2"
Stem Number
L-1213-112L-1213-2L-5811-2L-5811-212L-3410-112L-3410-2L-3410-212
Other stem sizes and dimensions available.*Special Order/Minimum Quantity
POLYURETHANE/CAST IRON
TOP PLATE
#20#3
5 "
4 "
3" 4"
Holesfor 3/8"Dia. Bolts4-1/8"
3-3/8"
2-3/8"
3-1/8"
Holesfor1/4" Bolts
4-1/2"3 to 3-5/8"
2-5/8to 3"
3-3/4"
SlottedHoles for3/8" Dia.Bolts
#14 #24#6
STEMS
“O” STEM TABLE
L
D
“L” STEM TABLE
L
T
HARD RUBBERPAGE 112 PAGE 128
Subtract .187" from overall height for stem casters.Other stem sizes and dimensions available.*Special Order/Minimum Quantity
DiameterTreadWidth
LoadCapacity
Wheel Material Bearing Swivel Part Number Rigid Part Number Approx.Weight
OverallHeight
SwivelRadius
NEOPRENE RUBBER BALL 32-20-XDN 32-20-XRDN
HI-CAP NEOPRENE BALL 32-20-XKN 32-20-XRKN
HARD RUBBER BALL 32-20-XH 32-20-XRH
ADVANCED ELASTOMER BALL 32-20-XAE 32-20-XRAE
21⁄27⁄8
250 NEOPRENE RUBBER BALL 32 1/2-20-XDN 32 1/2-20-XRDN
2-1/2
3-3/4 2-5/8350 HARD RUBBER BALL 32 1/2-20-XH 32 1/2-20-XRH
HI-CAP NEOPRENE BALL 32 1/2-20-XKN 32 1/2-20-XRKN
ADVANCED ELASTOMER BALL 32 1/2-20-XAE 32 1/2-20-XRAE
3 7⁄8
220 EXTRA SOFT NEOPRENEACETAL 33-20-PEZN-RD 33-20-PREZN-RD
2-3/4 7-1/4 3
BALL 33-20-XEZN-RD 33-20-XREZN-RD
NEOPRENE RUBBERACETAL 33-20-PDN 33-20-PRDNBALL 33-20-XDN 33-20-XRDN
HARD RUBBERACETAL 33-20-PH 33-20-PRHBALL 33-20-XH 33-20-XRH
375 HI-CAP NEOPRENEACETAL 33-20-PKN 33-20-PRKNBALL 33-20-XKN 33-20-XRKN
4 7⁄8
220 EXTRA SOFT NEOPRENEACETAL 34-20-PEZN-RD 34-20-PREZN-RD
3 5-1/4 3-1/2
BALL 34-20-XEZN-RD 34-20-XREZN-RD
250 NEOPRENE RUBBERACETAL 34-20-PDN 34-20-PRDNBALL 34-20-XDN 34-20-XRDN
375 HI-CAP NEOPRENEACETAL 34-20-PKN 34-20-PRKNBALL 34-20-XKN 34-20-XRKN
400 HARD RUBBERACETAL 34-20-PH 34-20-PRHBALL 34-20-XH 34-20-XRH
5 7⁄8
220 EXTRA SOFT NEOPRENEACETAL 35-20-PEZN-RD 35-20-PREZN-RD
3-1/4 6-1/4 4
BALL 35-20-XEZN-RD 35-20-XREZN-RD
250 NEOPRENE RUBBERACETAL 35-20-PDN 35-20-PRDNBALL 35-20-XDN 35-20-XRDN
375 HI-CAP NEOPRENEACETAL 35-20-PKN 35-20-PRKNBALL 35-20-XKN 35-20-XRKN
400 HARD RUBBER ACETAL 35-20-PH 35-20-PRH
LBS LBS
350
250
2 7⁄8250
ROUND DONUT / NEOPRENE BALL 32-20-XDN-RD 32-20-XRDN-RD
2 3-1/4 2-1/4
40011⁄4 2-1/2
4POLYURETHANE / CAST IRON HUB BALL 32 1/2-20-XADI-M-CI 32 1/2-20-XRADI-M-CI
400
300
400