28 CA6000 Effective Date: January 2012 PRODUCT CATALOG · residencial pinares de suiza pol. 15 #44, nva. san salvador, el salvador phone: +503 2288-1519 fax: +503 2288-1518. chile

CA6000Effective Date:January 2012

PRODUCT CATALOG

28

Catlogo tambindisponible en Espaol

Baldor Electric CompanyCA6000

Printed in the U.S.A.01/12 TCP 10,000

BALDOR ELECTRIC COMPANYP.O. Box 2400 Fort Smith, AR 72902-2400 U.S.A.

Ph: (479) 646-4711 Fax (479) 648-5792 International Fax (479) 648-5895www.baldor.com www.maskapulleys.com

JAPAN DIA BLDG 802, 2-21-1 TSURUYA-CHO, KANAGAWA-KU YOKOHAMA, 221-0835, JAPAN PHONE: 81-45-412-4506 FAX: 81-45-412-4507

MEXICO LEON, GUANAJUATO KM. 2.0 BLVD. AEROPUERTO LEN 37545, GUANAJUATO, MXICO PHONE: +52 477 761 2030 FAX: +52 477 761 2010 MIDDLE EAST & NORTH AFRICA VSE INTERNATIONAL CORP. P. O. BOX 5618 BUFFALO GROVE, IL 60089-5618 PHONE: 847 590 5547 FAX: 847 590 5587

PANAMA AVE. RICARDO J. ALFARO EDIFICIO SUN TOWERS MALL PISO 2, LOCAL 55 CIUDAD DE PANAM, PANAM PHONE: +507 236-5155 FAX: +507 236-0591

SINGAPORE 18 KAKI BUKIT ROAD 3, #03-09 ENTREPRENEUR BUSINESS CENTRE SINGAPORE 415978 PHONE: (65) 6744 2572 FAX: (65) 6747 1708

SWITZERLAND POSTFACH 73 SCHUTZENSTRASSE 59 CH-8245 FEUERTHALEN SWITZERLAND PHONE: +41 52 647 4700 FAX: +41 52 659 2394

TAIWAN 1F, NO 126 WENSHAN 3RD STREET, NANTUN DISTRICT, TAICHUNG CITY 408 TAIWAN R.O.C PHONE: (886) 4 238 04235 FAX: (886) 4 238 04463

UNITED KINGDOM 6 BRISTOL DISTRIBUTION PARK HAWKLEY DRIVE BRISTOL BS32 0BF U.K. PHONE: +44 1454 850000 FAX: +44 1454 859001

VENEZUELA AV. ROMA. QTA EL MILAGRO. URB. CALIFORNIA NORTE CARACAS, 1070 VENEZUELA PHONE/FAX: +58 212 272 7343 MOBILE: +58 414 114 8623

NEW YORK AUBURN ONE ELLIS DRIVE AUBURN, NY 13021 PHONE: 315-255-3403 FAX: 315-253-9923

NORTH CAROLINA GREENSBORO 1220 ROTHERWOOD ROAD GREENSBORO, NC 27406 PHONE: 336-272-6104 FAX: 336-273-6628

OHIO CINCINNATI 2929 CRESCENTVILLE ROAD WEST CHESTER, OH 45069 PHONE: 513-771-2600 FAX: 513-772-2219

CLEVELAND 8929 FREEWAY DRIVE MACEDONIA, OH 44056 PHONE: 330-468-4777 FAX: 330-468-4778

OKLAHOMA TULSA 5555 E. 71ST ST., SUITE 9100 TULSA, OK 74136 PHONE: 918-366-9320 FAX: 918-366-9338

OREGON PORTLAND 12651 SE CAPPS ROAD CLACKAMAS, OR 97015 PHONE: 503-691-9010 FAX: 503-691-9012

PENNSYLVANIA PHILADELPHIA 1035 THOMAS BUSCH MEMORIAL HIGHWAY PENNSAUKEN, NJ 08110 PHONE: 856-661-1442 FAX: 856-663-6363 PITTSBURGH 159 PROMINENCE DRIVE NEW KENSINGTON, PA 15068 PHONE: 724-889-0092 FAX: 724-889-0094

TENNESSEE MEMPHIS 4000 WINCHESTER ROAD MEMPHIS, TN 38118 PHONE: 901-365-2020 FAX: 901-365-3914

INDIANA INDIANAPOLIS 5525 W. MINNESOTA STREET INDIANAPOLIS, IN 46241 PHONE: 317-246-5100 FAX: 317-246-5110

IOWA DES MOINES 1943 HULL AVENUE DES MOINES, IA50313 PHONE: 515-263-6929 FAX: 515-263-6515

MARYLAND BALTIMORE 6660 SANTA BARBARA RD. SUITES 22-24 ELKRIDGE, MD 21075 PHONE: 410-579-2135 FAX: 410-579-2677

MASSACHUSETTS BOSTON 6 PULLMAN STREET WORCESTER, MA 01606 PHONE: 508-854-0708 FAX: 508-854-0291

MICHIGAN DETROIT 5993 PROGRESS DRIVE STERLING HEIGHTS, MI 48312 PHONE: 586-978-9800 FAX: 586-978-9969

MINNESOTA MINNEAPOLIS 21080 134TH AVENUE NORTH ROGERS, MN 55374 PHONE: 763-428-3633 FAX: 763-428-4551

MISSOURI ST LOUIS 13678 LAKEFRONT DRIVE EARTH CITY, MO 63045 PHONE: 314-373-3032 FAX: 314-373-3038

KANSAS CITY 1501 BEDFORD AVENUE NORTH KANSAS CITY, MO 64116 PHONE: 816-587-0272 FAX: 816-587-3735

TEXAS DALLAS 2920 114TH STREET SUITE 100 GRAND PRAIRIE, TX 75050 PHONE: 214-634-7271 FAX: 214-634-8874

HOUSTON 10355 W. LITTLE YORK ROAD SUITE 300 HOUSTON, TX 77041 PHONE: 281-977-6500 FAX: 281-977-6510

UTAH SALT LAKE CITY 2230 SOUTH MAIN STREET SALT LAKE CITY, UT 84115 PHONE: 801-832-0127 FAX: 801-832-8911

WISCONSIN MILWAUKEE 1960 SOUTH CALHOUN ROAD NEW BERLIN, WI 53151 PHONE: 262-784-5940 FAX: 262-784-1215

INTERNATIONAL SALES FORT SMITH, AR P.O. BOX 2400 FORT SMITH, AR 72902 PHONE: 479-646-4711 FAX: 479-648-5895 CANADA

EDMONTON, ALBERTA 4053-92 STREET EDMONTON, ALBERTA T6E 6R8 PHONE: 780-434-4900 FAX: 780-438-2600

TORONTO OAKVILLE, ONTARIO 2750 COVENTRY ROAD OAKVILLE, ONTARIO L6H 6R1 PHONE: 905-829-3301 FAX: 905-829-3302

MONTREAL, QUEBEC 5155 J-ARMAND BOMBARDIER SAINT-HUBERT, QUBEC CANADA J3Z 1G4 PHONE: 514-933-2711 FAX: 514-933-8639

VANCOUVER, BRITISH COLUMBIA 1538 KEBET WAY PORT COQUITLAM, BRITISH COLUMBIA V3C 5M5 PHONE 604-421-2822 FAX: 604-421-3113

WINNIPEG, MANITOBA 54 PRINCESS STREET WINNIPEG, MANITOBA R3B 1K2 PHONE: 204-942-5205 FAX: 204-956-4251

INTERNATIONAL

AUSTRALIA UNIT 3, 6 STANTON ROAD SEVEN HILLS, NSW 2147, AUSTRALIA PHONE: (61) (2) 9674 5455 FAX: (61) (2) 9674 2495

UNIT 8, 5 KELLETTS ROAD ROWVILLE, VICTORIA, 3178 AUSTRALIA PHONE: (61) (3) 9753 4355 FAX: (61) (3) 9753 4366

EL SALVADOR RESIDENCIAL PINARES DE SUIZA POL. 15 #44, NVA. SAN SALVADOR, EL SALVADOR PHONE: +503 2288-1519 FAX: +503 2288-1518

CHILE ALCNTARA 200, FLOOR 8, POSTAL CODE 7550159, LAS CONDES, SANTIAGO, CHILE PHONE: (56)-(2)-6514707

CHINA 160 SONG SHENG ROAD SONGJIANG INDUSTRY ZONE SHANGHAI 201613, CHINA PHONE: +86 21 5760 5335 FAX : +86 21 5760 5336

GERMANY HERMANN-HEINRICH - GOSSEN 3 50858 KOLN, GERMANY PHONE: 49-2234379410 FAX: 49-22343794164

DIESELSTRASSE 22 D-85551 KIRCHHEIM MUNICH, GERMANY PHONE: +49 89 90 5080 FAX: +49 89 90 50 8492

INDIA 14, COMMERCE AVENUE MAHAGANESH COLONY PAUD ROAD PUNE - 411038 MAHARASHTRA, INDIA PHONE: +91 20 25 45 27 17 / 18 FAX: +91 20 25 45 27 19

INDONESIA TALAVERA OFFICE PARK, 28TH FLOOR, SUITE M18 JI. T.B. SIMATUPANG, KAV. 22-26 JAKARTA 12430, INDONESIA PHONE: +62 21 7599 9879 FAX: + 62 21 7599 9878

ITALY VIA SOTTOBISIO 30 BALERNA CH-6828 PHONE: +41 91 683 6161 FAX: +41 91 630 2633

UNITED STATES

ARIZONA PHOENIX 4211 S 43RD PLACE PHOENIX, AZ 85040 PHONE: 602-470-0407 FAX: 602-470-0464

ARKANSAS CLARKSVILLE 1001 COLLEGE AVENUE CLARKSVILLE, AR 72830 PHONE: 479-754-9108 FAX: 479-754-9205

CALIFORNIA LOS ANGELES 6480 FLOTILLA STREET COMMERCE, CA 90040 PHONE: 323-724-6771 FAX: 323-721-5859

HAYWARD 21056 FORBES AVENUE HAYWARD, CA 94545 PHONE: 510-785-9900 FAX: 510-785-9910

COLORADO DENVER 3855 FOREST STREET DENVER, CO 80207 PHONE: 303-623-0127 FAX: 303-595-3772

CONNECTICUT WALLINGFORD 65 SOUTH TURNPIKE ROAD WALLINGFORD, CT 06492 PHONE: 203-269-1354 FAX: 203-269-5485

FLORIDA TAMPA/PUERTO RICO/ VIRGIN ISLANDS 3906 EAST 11TH AVENUE TAMPA, FL 33605 PHONE: 813-248-5078 FAX: 813-247-2984

GEORGIA ATLANTA 62 TECHNOLOGY DRIVE ALPHARETTA, GA 30005 PHONE: 770-772-7000 FAX: 770-772-7200

ILLINOIS CHICAGO 340 REMINGTON BLVD. BOLINGBROOK, IL 60440 PHONE: 630-296-1400 FAX: 630-226-9420

EDMONTONVANCOUVER

DISTRICT OFFICE & WAREHOUSES

PORTLAND

HAYWARD

LOS ANGELES

PHOENIX

MONTERREY

GUADALAJARA

TAMPA

FORTSMITH

MEMPHIS

WINNIPEG

ATLANTA

KANSAS CITY

ST LOUIS

DENVER

DES MOINES

GREENSBORO

BALTIMORE

PITTSBURGH

CINCINNATI

INDIANAPOLIS

DALLAS

CHICAGO

PHILADELPHIANEW YORK

BOSTONAUBURN

CLEVELAND

DETROIT

TORONTOMINNEAPOLIS MILWAUKEE

SALT LAKE CITY

TULSA

MONTREAL

HOUSTON

LEON

WALLINGFORD

CLARKSVILLE

MEXICO CITY

BALDORMASKA SALES OFFICES

Baldor specializes in large sheaves, bushings & HTD sprockets for a variety of heavy-duty industries. Here is a sampling of some recent orders:

12 groove - 8V 98 Sheaves

Industry: Mining Equipment

60 split hub Sheave

Industry: Mining equipment

W Bushing

Industry: Con-Ag & Oilfield

HTD Sprocket - 37.78

Industry: Sawmills

8V 21.2- GE 752 Series

Industry: Mudpumps

12 groove- 8V 81 Sheave

Industry: Mudpumps

Baldor can assist you in choosing and designing the best parts for your drives needs - contact our Technical Sales people for a detailed analysis based on your specifications.

www.baldor.com www.maskapulleys.com

Baldor Keeps you Connected

Seeing as every MTO is unique, Baldor does not have a pre-established evaluation scale.We will rather give every request our personalized consideration.

MTO form available in PDF format at http://www.maskapulleys.com, tab Products - Request Quote

INDUSTRIAL APPLICATIONS

SPECIAL APPLICATIONS & MTO (MADE-TO-ORDER) PRODUCTS

BaldorMaska Products keep showing up EVERYWHERE. And Baldors flexibility allows us to meet your needs in ductile or grey cast iron for your special or custom pulleys. See the inside back cover for more information on Baldors capabilities for large parts.

Agriculture Hubs, cast sprockets & idler pulleys are among our many agri-MTO parts.

Mining Inertia wheels, deep groove sheaves, and up to 98" available upon request.

Wood Processing HTD sprockets & ductile sheaves complement our standard product line.

Air Handling Complete line of adjustable sheaves in stock. Value-added kitting of V-Belt drive components.

Aggregate Specialized deep groove sheaves.

QD style available in ductile and/or dynamically balanced upon request.

Oilfield Oilfield machinery, such as mud pumps, use trac-tion motors that require a special hub for a shrink-fit.

BaldorMaska now has several GE 752 Series

sheaves in stock, as well as the driven Off-Set series, with W & S bushings.

Air Compressors & PumpsFin type flywheel sheaves with taper or other bore styles.

WEB SITE FEATURES

Benefit from a host of time-saving services with many on-line features.

1. The BaldorVIP On-line Tool for both OEMS &Distributors!Reliable real-time data that offers our valued customers effective solutions to be more effective and productive.

3. CAD DRAWINGSConsult or download 2D & 3D drawings of BaldorMaska standard product line without cost.

4. e-CATALOGFind Cross References quickly & easily.

5. PDF CATALOGConsult our print catalog in an easily readable format.

BaldorVIP ADVANTAGES: Order Entry & Order Status Inventory Check Account Activity Reports EDI Orders using your part numbers Cross References

2. DRIVE SELECTION PROGRAM

OEM:Welcome to a world where complicated formulas and engineering tables are a thing of the past, when it comes to selecting the right V belt drive components.

DISTRIBUTORS:It isnt always easy helping your customers determine their requirements for PT components. Now, selecting the right drive has never been easier!

FEATURES: Improved accuracy, quicker, easier & includes cross references Direct access to BaldorMaska catalog Print it, fax it or e-mail the results with just ONE click

Find at www.maskapulleys.com

INDEX

PROMOTIONAL ITEMS Product Display Units Four-sided Floor Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Wall Mount Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 V-Belt Drive Accessories V-Belt Tension Meter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Sheave & Belt Gage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

BUSHINGS & HUBS QD Bushings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-15 BK2 Bushings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-17 Taper-lock Bushings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-22 Short QD Bushings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 QD Weld-on Hubs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24-25 XT Bushings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26-27 XT Hubs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

SHEAVESGeneral Sheaves Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29-34 Light Duty: MA, MB, MAL, MBL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35-44 Fractional Fixed Bore: MFAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45-46 Step Pulleys: MAS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47-48 Reducer Bushings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Adjustable Pitch: MVL, 8000 Series, VP Series, MVS . . . . . . . . . . . . . . . . . . 50-60 Classical Sections: A/B Combination, C, D . . . . . . . . . . . . . . . . . . . . . . . . . . 61-84 Narrow Sections: 3V, 5V, 8V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85-106

Page #

NOTE: All dimensions are subject to change without prior notice.

INDEX

SYNCHRONOUS DRIVESGeneral Synchronous Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 Timing Pulleys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108-116 HTD Sprockets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .117-126

COUPLINGSGeneral Couplings Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .127-132 Maska Starflex: Elastomeric jaw type . . . . . . . . . . . . . . . . . . . . . . . . . . . . .133-146 4-Flex: Elastomeric gear type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .147-161 Maskaflex: Elastomeric tire type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .162-168

BELTSGeneral Belts Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .169-172 Classical V-belts - A, B, C Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .173-175 Classical cogged, Narrow & Narrow cogged. . . . . . . . . . . . . . . . . . . . . . . .176-180 Link V-belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179 Synchronous: Trapezoidal (Timing) & Curvilinear (H.T.B.) . . . . . . . . . . . .181-186

CROSS REFERENCES Listing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .186-189

TERMS & CONDITIONS are located on the Companys web site at www.baldor.com

Page #

NOTE: All dimensions are subject to change without prior notice.

PR

OM

OTIO

NA

L

3

PRODUCT DISPLAY UNITS

4-SIDED FLOOR MODELTOP 17" X 17"

HEIGHT 48"BOTTOM 22" X 22"

Attractive 4-sided floor model allows you to display BaldorMaska popular sizes of single and double groove light duty cast iron sheaves, and accompanying QD bushings. All hardware, mounting instructions and labels are included.

DESCRIPTION PRODUCT #:

Display Stand only DIS-4S-STANDParts DIS-4S-ITEMSParts&Stand DIS-4S-COMPLETE LIST PRICEDisplay Stand only: $300.00Display Stand (bought with the parts): $150.00Parts: $2,427.50Combined Cost: $2,577.50 APPROX. WEIGHT:Display Stand 93 lbs.Parts 242 lbs.

TOTAL 337 lbs.

PartNo.

Size/Qty ListPrice Extension1/2 5/8 7/8

MA 20 2 2 2 = 6 $8.32 $49.92MA 25 2 2 2 = 6 9.60 57.60MA 30 2 2 2 = 6 11.88 71.28MA 35 2 2 2 = 6 13.32 79.92MA 40 2 2 2 = 6 19.16 114.96MA 45 2 2 2 = 6 20.56 123.36MA 50 2 2 2 = 6 21.92 131.52

TOTAL: 42 $628.56

PartNo.

Size/Qty List Price

Extension1/2 5/8 7/8

MB 20 2 2 2 (3/4) = 6 $11.25 $67.50MB 25 2 2 2 = 6 12.00 72.00MB 30 2 2 2 = 6 13.20 79.20MB 35 2 2 2 = 6 18.08 108.48MB 40 2 2 2 = 6 20.56 123.36MB 45 2 2 2 = 6 22.72 136.32MB 50 2 2 2 = 6 23.12 138.72

TOTAL: 42 $725.58

PartNo.

Qty List Price

Extension

L X 1/2 2 $9.00 $18.00L X 5/8 2 9.00 18.00L X 3/4 2 9.00 18.00L X 7/8 2 9.00 18.00L X 1 2 9.00 18.00

L X 1 1/8 2 9.00 18.00L X 1 1/4 2 9.00 18.00L X 1 3/8 2 9.00 18.00L X 1 3/16 2 9.00 18.00 TOTAL: 18 $162.00

PartNo.

QtyList

PriceExtension

MBL 31 2 $21.68 $43.36MBL 33 2 23.06 46.12MBL 35 2 23.10 46.20MBL 37 2 23.28 46.56MBL 39 2 23.34 46.68MBL 44 2 24.36 48.72MBL 47 2 24.92 49.84MBL 49 2 25.44 50.88MBL 54 2 26.46 52.92MBL 57 2 26.76 53.52MBL 59 2 28.20 56.40MBL 64 2 30.96 61.92MBL 69 2 33.52 67.04MBL 77 1 35.96 35.96MBL 87 1 42.48 42.48MBL 97 1 47.44 47.44MBL 107 1 52.16 52.16MBL 127 1 63.16 63.16

TOTAL: 31 $911.36

TOTAL LIST PRICE OF PARTS: $2,427.50

(without displayboard)

SIDE 1: Fixed bore sheaves A Belt SIDE 4: Bushings

SIDE 2: Fixed bore sheaves B Belt

SIDE 3: Bush type sheaves A-B Belts

PR

OM

OTIO

NA

L

4

PRODUCT DISPLAY UNITS

WALL MODEL

This 1-sided wall unit, with a detachable bottom shelf, is offered with a selection of our popular light-duty sheaves & QD bushings.

Or you can Do-it-yourself and put together a display with your best-sellingBaldorMaska products.

1. Light-DutySheaves&Bushings Includes board, shelf, parts, pegs & labels: DIS-W1-COMPLETE(itemslistedonfacingpage)

2. Do-it-yourself Includes board, shelf and 40 4" pegs: DIS-W-BOARD

48"h X 33"w hardware to attach to wall not included.

PRODUCT # LIST PRICEDIS-W-BOARDSHELF $225.00DIS-W1-ITEMS $1,519.68DIS-W1-COMPLETE $1,744.68

(Example)

Parts List

Part No.Size/Qty. List

PriceTotal

1/2 5/8 7/8MA 20MA 25MA 30MA 35MA 40MA 45MA 50

2222222

2222222

2222222

= 6= 6= 6= 6= 6= 6= 6

42

$ 8.32 9.60 11.88 13.32 19.16 20.56 21.92

$ 49.92 57.60 71.28 79.92 114.96 123.36 131.52

$628.56

FIXED BORE SHEAVES, A BELTPart No.

Qty. List Price Total

MBL 31MBL 33MBL 35MBL 37MBL 39MBL 44MBL 47MBL 49MBL 54MBL 57MBL 59MBL 64

222222222222

24

$ 21.68 23.06 23.10 23.28 23.34 24.36 24.92 25.44 26.46 26.76 28.20 30.96

$ 43.36 46.12 46.20 46.56 46.68 48.72 49.84 50.88 52.92 53.52 56.40 61.92

$603.12

BUSH TYPE SHEAVES, A-B BELT

Part No.

Qty. List Price Total

L X 1/2L X 5/8L X 3/4L X 7/8L X 1

L X 1-1/8L X 1-1/4L X 1-3/8

44444444

32

$ 9.00 9.00 9.00 9.00 9.00 9.00 9.00 9.00

$ 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00

$288.00

QD BUSHINGS

TOTAL LIST PRICE OF WALL MODEL PARTS: $1,519.68

PR

OM

OTIO

NA

L

5

V-BELT DRIVE ACCESSORIES

Indispensable tools for maintenance mechanics to ensure efficient, cost-saving operations.

V-BELT TENSION METER

Belts that are too loose will slip, causing excessive belt and sheave wear. Saggingbeltscansnapduringstart-uporduringpeakloads. Belts that are too tight can damage bearings. Both situations reduce power transmission performance levels.

Proper tension and installation can lengthen belt life and lessen expensive downtime.

IMPORTANT REMINDER

Improper belt tension, either too tight or too loose, can result in belt drive problems. For critical drives, a manual verification is insufficient.

DID YOU KNOW THAT...Part No. 006347Call for pricing.

This indispensable maintenance tool is a handy way ofcheckingbelttensiononsinglestrandbeltsupto1" wide within the ranges listed below. Scales are provided for checking the required force and thebelt deflection distance.

For use with all small V-belt and synchronous drives.

Comes in a protective plastic tube with instructions.

ForceRange: 0-35lbs. 0-15.9kg.

TensionRange: 0-560lbs. 0-255kg.

PR

OM

OTIO

NA

L

6

V-BELT DRIVE ACCESSORIES

SHEAVE & BELT GAGE

Inspect sheaves often for optimal operating efficiency. Worn grooves cause one ormorebeltstoridelowerthantheothers,knownasdifferentialdriving,resultingin premature wearing of belts and reduced performance levels.

Rounded sheave sidewalls ruin belts quickly by wearing their bottom corners (see illustration below). The belts wedging action is also reduced.

If more than 1/32" of wear is evident, reduced V-belt life will result.

IMPORTANT REMINDER

You can also use these gages to determine the corresponding belt that fits with each sheave. Find the gage that fits, depending on size (groove must not be worn), and it will indicate the belt type.

The belt gages help you determine the proper belt section; just insert the old belt in the V to determine belt cross section.

DID YOU KNOW THAT...

Part No. 006346Call for pricing.

Molded plastic and color-matchedwith our V-beltsheaves.9keysforsheavegroovesand2forbelts.

To determine whether the sheave grooveis worn, select the proper sheave gage and insert the correct angle, based on the sheaves diameter, into the groove.

ForusewithallClassical,NarrowandA/Bcombi-nation sheaves.

Not more than 1/32" wear

BU

SH

ING

S &

HU

BS

7

QD BUSHINGS

QD BUSHING

All Bushings up to sizes M, and those with a shallowkeyseat,aremanufacturedinDUCTILEiron,a stronger material offering numerous advantages

All sizes have a set screw over the keywayto secure the key which is advantageous in vertical appli cations

100% in terchangeab le w i th l icensed manufacturers products

Availableininches&metricsizesAvailableShortforweld-onhubsFull,notpartialsplit


EXAMPLE:SFX1-1/16

SF X1-1/16

SF: BUSHINGSIZE

X1-1/16: BORESIZE(1-1/16") Inch bore sizes are designated with the

whole inch followed by the fraction. For example, a 1.5" diameter bore would be 1-1/2. Metric bore sizes are designatedwith MM after the metric dimension (X25MM).

HOW TO ORDER

BU

SH

ING

S &

HU

BS

8

QD BUSHINGS

TAPERED, PRECISION FIT.

Precision machining of the tapered bore in the hub of the QD rim and the tapered mating surface of the bushing insures a snug, precision fit between rim and bushing. Tightening the cap screws draws the sheave up tight on the bushing - BaldorMaska QD Bushings and Sheaves are true running.

FULL - NOT PARTIAL SPLIT.

This feature, together with the tapered, precision fit of rim and bushing, enables the QD Bushing to compress evenly through the overall bushing length, thus gripping the shaft with tremendous pressure, the equivalent of a press fit onthe shaft. And the full split makes it just as easy to install QD Sheaves on all standard size shafts as it is to install them on shafts which may be slightly oversized or slightly undersized.

EASY TO INSTALL, EASY TO REMOVE.

ToinstallBaldorMaska QD Sheaves, the cap screws are used as pull-wrench only - noadditionalleverageisnecessary.ToremoveQDSheaves,thecapscrewsaretakenoutandusedasjackscrews.Afewquickturnsoneachscrew,andthetightgripofthebushingontheshaftiseasilybroken.

SET SCREW OVER THE KEY.

Once the correct position of the QD Sheave on the shaft is determined, tightening the setscrewinthebushingflangedownonthekeywillholdthebushinginthispositionwhilethepull-upboltsaretightened.Thissetscrewholdsthekeyinplaceontheshaftduring drive operation - an especially desirable feature on drives that have vertical shafts facing down. Available on all QD bushings except W AND S.

FULLY INTERCHANGEABLE WITH OTHER QD BUSHINGS.

As in thecaseofBaldorMaska QD Sheaves, the QD Bushings also conform to standardized QD dimensions and sheave types. Because of this feature, any QD Stock Bushing may be interchanged with the same size bushing that other QD manufacturers produce.

QDbushingsisaregistredtrademarkandmanufacturedbyBaldorunderlicense.

BU

SH

ING

S &

HU

BS

9

QD BUSHINGS

STANDARD MOUNTING

REVERSE MOUNTING

QD Bushings can be mounted either way Capscrews are always accessible from the outside


DRY MOUNTING: Do not use lubricants or antiseize compounds on bushing and hub mounting area.

IMPORTANT REMINDER

QD BUSHING MOUNTING

STANDARD - BUSHING FLANGE TOWARD MACHINE OR MOTOR

1. Align tapped holes in bushing flange with drilled holes in sheave hub.

2. Insert capscrews through drilled holes in sheave hub and thread loosely into tapped holes in bushing flange.

3. Position assembly on shaft and tighten capscrews progressively and uniformly.

TO REMOVE

1. Remove capscrews and thread into tapped holes in sheave hub. Tighten progressively until bushing is free from sheave taper.

2. Remove assembly from shaft.

REVERSE - BUSHING FLANGE AWAY FROM MACHINE OR MOTOR

1. Align drilled holes in bushing flange with tapped holes in sheave hub.

2. Insert capscrews through drilled holes in bushing flange and thread loosely into tapped holes in sheave hub.

3. Position assembly on shaft and tighten capscrews progressively and uniformly.

TO REMOVE

1. Remove capscrews and thread into tapped holes in bushing flange. Tighten progressively until bushing is free from sheave taper.

2. Remove assembly from shaft.

BU

SH

ING

S &

HU

BS

10

QD BUSHINGS

QD BUSHING PROPER WRENCH TORQUE

TIGHTENING IMPORTANTTighten screws evenly and progressively. Never allow the sheave to be drawn in contact with the flange of the bushing. If extreme screw tightening forces are applied, excess pressures will be created in the hub of the mounted sheave which may cause it tocrack.

Set Screw Size

Socket / Allen Key Size

(Across Flat)

Recommended Tightening Torque

Set Screw Axial Load ( 30%)Cup Point Knurled Point

Newton - Meter (Nm)

LBF - Inches Newtons (N)

LBF Newtons (N)

LBF

#10 - 24 3/32 3.62 32 1500 340 2225 5001/4 - 20 1/8 6.8 60 2500 560 3650 8205/16 - 18 5/32 12.4 110 3500 785 5110 11503/8 - 16 3/16 22.6 200 4500 1010 6580 14801/2 - 13 1/4 45.2 400 9000 2025 13230 29755/8 - 11 5/16 97.2 860 12000 2720 17800 4000

Note: For axial loads in excess of the values listed, a shouldered shaft against the face of the inner ring is recommended.

SET SCREW TIGHTENING TORQUES AND AXIAL LOADS

Bushing Size

Screw size

Inches

Torque Wrench Ft-Lbs

Open end or socket wrench Torque Capacity In-Lbs

Length Inches

Pull (LBS)

L 1/4 6 4 18 1,200JA # 10 5 4 15 1,000SH 1/4 9 4 27 3,500

SDS-SD 1/4 9 4 27 5,000SK 5/16 15 6 30 7,000SF 3/8 30 6 60 11,000E 1/2 60 12 60 20,000F 9/16 75 12 75 30,000J 5/8 135 15 108 45,000M 3/4 225 15 180 85,000N 7/8 300 15 240 150,000P 1 450 18 300 250,000W 1 1/8 600 24 300 375,000S 1 1/4 750 30 300 625,000

PROPER WRENCH TORQUE TO TIGHTEN SCREWS

BU

SH

ING

S &

HU

BS

11

QD BUSHINGS

Bushing Size

List Price

$

Dimensions - InchesCap Screws

Required NC Grade 5

Set Screw

Dimensions

Bore Range

A B D E F G H LBolt

Circle M

Min. Max.

L 9.00 11/32 1 5/8 2 1/2 1 29/32 3/16 3/32 1 11/32 2 2=1/4X7/8 10-24 UNC x 1/4" 3/8 1 1/2

JA 10.90 5/16 1 3/8 2 11/16 5/8 13/64 9/64 1 1 21/32 3=10-24X1 10-24 UNC x 1/4" 1/2 1 1/4

SH 14.90 3/8 1 7/8 2 11/16 7/8 3/4 1/4 1/8 1 1/4 2 1/4 3=1/4X1 3/8 1/4-20 UNC x 1/4" 1/2 1 11/16

SDS 17.30 7/16 2 3/16 3 3/16 7/8 3/4 1/4 1/8 1 5/16 2 11/16 3=1/4X1 3/8 1/4-20 UNC x 1/4" 1/2 2

SD 20.80 7/16 2 3/16 3 3/16 1 3/8 1 1/4 1/4 1/8 1 13/16 2 11/16 3=1/4X1 7/8 1/4-20 UNC x 1/4" 1/2 2

SK 26.80 1/2 2 13/16 3 7/8 1 3/8 1 1/4 5/16 3/16 1 7/8 3 5/16 3=5/16X2 1/4-20 UNC x 1/4" 1/2 2 5/8

SF 33.00 1/2 3 1/8 4 5/8 1 1/2 1 1/4 5/16 1/16 2 3 7/8 3=3/8X2 5/16-18 UNC x 3/8" 1/2 2 15/16

E 69.20 3/4 3 27/32 6 1 7/8 1 5/8 5/16 1/16 2 5/8 5 3=1/2X2 3/4 3/8-16 UNC x 3/8" 7/8 3 1/2

F 128.00 13/16 4 7/16 6 5/8 2 13/16 2 1/2 13/32 3/32 3 5/8 5 5/8 3=9/16X3 5/8 3/8-16 UNC x 3/8" 1 4

J 160.00 1 5 5/32 7 1/4 3 1/2 3 3/16 13/32 3/32 4 1/2 6 1/4 3=5/8X4 1/2 3/8-16 UNC x 3/8" 1 7/16 4 1/2

M 320.00 1 1/4 6 1/2 9 1/8 5 1/2 5 3/16 13/32 3/32 6 3/4 7 7/8 4=3/4X7 3/8-16 UNC x 1/2" 2 5 1/2

N 560.00 1 1/2 7 10 6 5/8 6 1/4 9/16 3/16 8 1/8 8 1/2 4=7/8X8 1/2-13 UNC x 5/8" 2 3/4 6

P 840.00 1 3/4 8 1/4 11 3/4 7 5/8 7 1/4 5/8 1/4 9 3/8 10 4=1X9 1/2 5/8-11 UNC x 1 1/4" 2 15/16 7

W 1480.00 2 10 7/16 15 9 3/8 9 5/8 1/4 11 3/8 12 3/4 4=1 1/8X11 1/2 1-8 UNC x 1 1/2" 4 1/4 8-1/2

S 3480.00 3 1/4 12 1/8 17 3/4 12 1/2 12 13/16 5/16 15 3/4 15 5=1 1/4X15 1/2 1 1/4-7 UNC x 2" 5 1/2 10

SX5** 3132.00 3 1/4 12 1/8 17 3/4 12 1/2 12 13/16 5/16 15 3/4 15 5=1 1/4X15 1/2 1 1/4-7 UNC x 2" - -

SX7-1/2** 3132.00 3 1/4 12 1/8 17 3/4 12 1/2 12 13/16 5/16 15 3/4 15 5=1 1/4X15 1/2 1 1/4-7 UNC x 2" - -

Refer to page 10 for Cap screw torque ratings Note: Approx. weight in lbs. for an average size bore. ** RB = Rough bore

Bushing L

(H - Cross Reference)

Bushing JA to J Inclusive

Bushing M to W Inclusive

Bushing S Taper 3/4 per FT on Diameter - B -

QD BUSHINGS BORE AND KEYSEAT DIMENSIONS

DIMENSIONS

BU

SH

ING

S &

HU

BS

12

QD BUSHINGSNote:TaperedBushingsareavailable fromstock inallboresandkeyseats listed. Insomecases,as thebore increases indiameter,ashallowkeyseatisprovided-duetoinsufficientmetalthickness.Whenthishappens,Baldorfurnishesthecorrectrectangularkey(inchesorimperialboreonly).Thisdoesnotaffectthebushingsabilitytotransmittheload.Therectangularkey,orflatkeyassomecallit,fitsintothestandardkeywayintheshaft.Keys not supplied for standard keyseat dimension.

QD BUSHINGS STANDARD STOCK BORES (INCHES)

* Bushings with 1/2" wide keyway will be shipped unless the 5/8" wide keyway is specified when ordering. ** Shallow keyseat Baldor supplies the key All 1/2" bore sizes are stocked without a keyseat. A standard keyseat 1/8" X 1/16" is available upon request. Keys not supplied for standard keyseat dimension.

Bushing # Keyseat Key Wt

L

LX3/8 No. K.S. --- 1.1LX7/16 No. K.S. --- 1.1LX1/2 1/8 X 1/16 1/8 X 1/8 1.0LX9/16 1/8 X 1/16 1/8 X 1/8 1.0LX5/8 3/16 x 3/32 3/16 X 3/16 0.9LX11/16 3/16 x 3/32 3/16 X 3/16 0.9LX3/4 3/16 x 3/32 3/16 X 3/16 1.0LX13/16 3/16 x 3/32 3/16 X 3/16 0.9LX7/8 3/16 x 3/32 3/16 X 3/16 0.9LX15/16 1/4 x 1/8 1/4 X 1/4 0.8LX1 1/4 x 1/8 1/4 X 1/4 0.8LX1-1/16 1/4 x 1/8 1/4 X 1/4 0.7LX1-1/8 1/4 x 1/8 1/4 X 1/4 0.7LX1-3/16 1/4 x 1/8 1/4 X 1/4 0.7LX1-1/4 1/4 x 1/8 1/4 X 1/4 0.7LX1-5/16 5/16 x 1/16** 5/16 x 7/32 0.6LX1-3/8 5/16 x 1/16** 5/16 x 7/32 0.6LX1-7/16 3/8 x 1/16** 3/8 X 1/4 0.6LX1-1/2 3/8 x 3/64** 3/8 x 15/64 0.5

JA

JAX1/2 1/8 x 1/16 1/8 X 1/8 0.5JAX9/16 1/8 x 1/16 1/8 X 1/8 0.5JAX5/8 3/16 x 3/32 3/16 X 3/16 0.5JAX11/16 3/16 x 3/32 3/16 X 3/16 0.5JAX3/4 3/16 x 3/32 3/16 X 3/16 0.5JAX13/16 3/16 x 3/32 3/16 X 3/16 0.4JAX7/8 3/16 x 3/32 3/16 X 3/16 0.4JAX15/16 1/4 x 1/8 1/4 X 1/4 0.4JAX1 1/4 x 1/8 1/4 X 1/4 0.4JAX1-1/16 1/4 x 1/16** 1/4 X 3/16 0.4JAX1-1/8 1/4 x 1/16** 1/4 X 3/16 0.4JAX1-3/16 1/4 x 1/16** 1/4 X 3/16 0.3JAX1-1/4 1/4 x 1/32** 1/4 X 5/32 0.3

SH

SHX1/2 1/8 x 1/16 1/8 X 1/8 1.2SHX9/16 1/8 x 1/16 1/8 X 1/8 1.1SHX5/8 3/16 x 3/32 3/16 X 3/16 1.2SHX11/16 3/16 x 3/32 3/16 X 3/16 1.1SHX3/4 3/16 x 3/32 3/16 X 3/16 1.1SHX13/16 3/16 x 3/32 3/16 X 3/16 1.1SHX7/8 3/16 x 3/32 3/16 X 3/16 1.1SHX15/16 1/4 x 1/8 1/4 X 1/4 1.0SHX1 1/4 x 1/8 1/4 X 1/4 1.0SHX1-1/16 1/4 x 1/8 1/4 X 1/4 0.9SHX1-1/8 1/4 x 1/8 1/4 X 1/4 0.9SHX1-3/16 1/4 x 1/8 1/4 X 1/4 0.9SHX1-1/4 1/4 x 1/8 1/4 X 1/4 0.8SHX1-5/16 5/16 x 5/32 5/16 X5/16 0.8SHX1-3/8 5/16 x 5/32 5/16 X5/16 0.7SHX1-7/16 3/8 x 1/8** 3/8 X 5/16 0.8SHX1-1/2 3/8 x 1/16** 3/8 X 1/4 0.7SHX1-9/16 3/8 x 1/16** 3/8 X 1/4 0.7SHX1-5/8 3/8 x 1/16** 3/8 X 1/4 0.6SHX1-11/16 No K.S. --- 0.5

SD

S

SDSX1/2 1/8 x 1/16 1/8 X 1/8 1.7SDSX9/16 1/8 x 1/16 1/8 X 1/8 1.7SDSX5/8 3/16 x 3/32 3/16 X 3/16 1.7SDSX11/16 3/16 x 3/32 3/16 X 3/16 1.7SDSX3/4 3/16 x 3/32 3/16 X 3/16 1.7SDSX13/16 3/16 x 3/32 3/16 X 3/16 1.6SDSX7/8 3/16 x 3/32 3/16 X 3/16 1.6


SD

S

SDSX15/16 1/4 x 1/8 1/4 X 1/4 1.6SDSX1 1/4 x 1/8 1/4 X 1/4 1.5SDSX1-1/16 1/4 x 1/8 1/4 X 1/4 1.5SDSX1-1/8 1/4 x 1/8 1/4 X 1/4 1.5SDSX1-3/16 1/4 x 1/8 1/4 X 1/4 1.5SDSX1-1/4 1/4 x 1/8 1/4 X 1/4 1.4SDSX1-5/16 5/16 x 5/32 5/16 X5/16 1.3SDSX1-3/8 5/16 x 5/32 5/16 X5/16 1.3SDSX1-7/16 3/8 x 3/16 3/8 X 3/8 1.2SDSX1-1/2 3/8 x 3/16 3/8 X 3/8 1.2SDSX1-9/16 3/8 x 3/16 3/8 X 3/8 1.1SDSX1-5/8 3/8 x 3/16 3/8 X 3/8 1.1SDSX1-11/16 3/8 x 1/8** 3/8 X 5/16 1.1SDSX1-3/4 3/8 x 1/8** 3/8 X 5/16 1.1SDSX1-13/16 1/2 x 1/8** 1/2 X 3/8 1.0SDSX1-7/8 1/2 x 1/16** 1/2 X 5/16 1.0SDSX1-15/16 1/2 x 1/16** 1/2 X 5/16 0.9SDSX2 No K.S. --- 0.8

SD

SDX1/2 1/8 x 1/16 1/8 X 1/8 2.2SDX9/16 1/8 x 1/16 1/8 X 1/8 2.1SDX5/8 3/16 x 3/32 3/16 X 3/16 2.1SDX11/16 3/16 x 3/32 3/16 X 3/16 2.1SDX3/4 3/16 x 3/32 3/16 X 3/16 2.1SDX13/16 3/16 x 3/32 3/16 X 3/16 2.1SDX7/8 3/16 x 3/32 3/16 X 3/16 2.0SDX15/16 1/4 x 1/8 1/4 X 1/4 1.9SDX1 1/4 x 1/8 1/4 X 1/4 1.9SDX1-1/16 1/4 x 1/8 1/4 X 1/4 1.9SDX1-1/8 1/4 x 1/8 1/4 X 1/4 1.8SDX1-3/16 1/4 x 1/8 1/4 X 1/4 1.7SDX1-1/4 1/4 x 1/8 1/4 X 1/4 1.7SDX1-5/16 5/16 x 5/32 5/16 X5/16 1.6SDX1-3/8 5/16 x 5/32 5/16 X5/16 1.6SDX1-7/16 3/8 x 3/16 3/8 X 3/8 1.6SDX1-1/2 3/8 x 3/16 3/8 X 3/8 1.5SDX1-9/16 3/8 x 3/16 3/8 X 3/8 1.4SDX1-5/8 3/8 x 3/16 3/8 X 3/8 1.3SDX1-11/16 3/8 x 1/8** 3/8 X 5/16 1.3SDX1-3/4 3/8 x 1/8** 3/8 X 5/16 1.2SDX1-13/16 1/2 x 1/8** 1/2 X 3/8 1.2SDX1-7/8 1/2 x 1/16** 1/2 X 5/16 1.1SDX1-15/16 1/2 x 1/16** 1/2 X 5/16 1.0SDX2 No K.S. --- 0.8

SK

SKX1/2 1/8 x 1/16 1/8 X 1/8 3.7SKX9/16 1/8 x 1/16 1/8 X 1/8 3.6SKX5/8 3/16 x 3/32 3/16 X 3/16 3.6SKX11/16 3/16 x 3/32 3/16 X 3/16 3.6SKX3/4 3/16 x 3/32 3/16 X 3/16 3.6SKX13/16 3/16 x 3/32 3/16 X 3/16 3.5SKX7/8 3/16 x 3/32 3/16 X 3/16 3.5SKX15/16 1/4 x 1/8 1/4 X 1/4 3.5SKX1 1/4 x 1/8 1/4 X 1/4 3.4SKX1-1/16 1/4 x 1/8 1/4 X 1/4 3.3SKX1-1/8 1/4 x 1/8 1/4 X 1/4 3.3SKX1-3/16 1/4 x 1/8 1/4 X 1/4 3.2SKX1-1/4 1/4 x 1/8 1/4 X 1/4 3.2SKX1-5/16 5/16 x 5/32 5/16 X5/16 3.1SKX1-3/8 5/16 x 5/32 5/16 X5/16 3.1SKX1-7/16 3/8 x 3/16 3/8 X 3/8 3.0


SK

SKX1-1/2 3/8 x 3/16 3/8 X 3/8 2.9SKX1-9/16 3/8 x 3/16 3/8 X 3/8 2.8SKX1-5/8 3/8 x 3/16 3/8 X 3/8 2.8SKX1-11/16 3/8 x 3/16 3/8 X 3/8 2.7SKX1-3/4 3/8 x 3/16 3/8 X 3/8 2.6SKX1-13/16 1/2 x 1/4 1/2 X 1/2 2.5SKX1-7/8 1/2 x 1/4 1/2 X 1/2 2.4SKX1-15/16 1/2 x 1/4 1/2 X 1/2 2.3SKX2 1/2 x 1/4 1/2 X 1/2 2.2SKX2-1/16 1/2 x 1/4 1/2 X 1/2 2.1SKX2-1/8 1/2 x 1/4 1/2 X 1/2 2.0SKX2-3/16 1/2 x 1/8** 1/2 X 3/8 2.1SKX2-1/4 1/2 x 1/8** 1/2 X 3/8 1.9SKX2-1/4KW5/8 5/8 x 1/8** 5/8 X 7/16 1.9SKX2-5/16 5/8 x 1/8** 5/8 X 7/16 1.9SKX2-3/8 5/8 x 1/8** 5/8 X 7/16 1.8SKX2-7/16 5/8 x 1/16** 5/8 X 3/8 1.7SKX2-1/2 5/8 x 1/16** 5/8 X 3/8 1.6SKX2-9/16 No K.S. --- 1.3SKX2-5/8 No K.S. --- 1.2

SF

SFX1/2 1/8 x 1/16 1/8 X 1/8 5.1SFX9/16 1/8 x 1/16 1/8 X 1/8 5.0SFX5/8 3/16 x 3/32 3/16 X 3/16 5.0SFX11/16 3/16 x 3/32 3/16 X 3/16 5.0SFX3/4 3/16 x 3/32 3/16 X 3/16 5.0SFX13/16 3/16 x 3/32 3/16 X 3/16 4.9SFX7/8 3/16 x 3/32 3/16 X 3/16 4.8SFX15/16 1/4 x 1/8 1/4 X 1/4 4.8SFX1 1/4 x 1/8 1/4 X 1/4 4.8SFX1-1/16 1/4 x 1/8 1/4 X 1/4 4.7SFX1-1/8 1/4 x 1/8 1/4 X 1/4 4.7SFX1-3/16 1/4 x 1/8 1/4 X 1/4 4.6SFX1-1/4 1/4 x 1/8 1/4 X 1/4 4.7SFX1-5/16 5/16 x 5/32 5/16 X5/16 4.5SFX1-3/8 5/16 x 5/32 5/16 X5/16 4.4SFX1-7/16 3/8 x 3/16 3/8 X 3/8 4.4SFX1-1/2 3/8 x 3/16 3/8 X 3/8 4.3SFX1-9/16 3/8 x 3/16 3/8 X 3/8 4.1SFX1-5/8 3/8 x 3/16 3/8 X 3/8 4.2SFX1-11/16 3/8 x 3/16 3/8 X 3/8 4.0SFX1-3/4 3/8 x 3/16 3/8 X 3/8 4.0SFX1-13/16 1/2 x 1/4 1/2 X 1/2 3.9SFX1-7/8 1/2 x 1/4 1/2 X 1/2 3.8SFX1-15/16 1/2 x 1/4 1/2 X 1/2 3.7SFX2 1/2 x 1/4 1/2 X 1/2 3.6SFX2-1/16 1/2 x 1/4 1/2 X 1/2 3.4SFX2-1/8 1/2 x 1/4 1/2 X 1/2 3.4SFX2-3/16 1/2 x 1/4 1/2 X 1/2 3.3SFX2-1/4 1/2 x 1/4 1/2 X 1/2 3.2SFX2-1/4KW5/8 5/8 x 5/16 5/8 X 5/8 4.0SFX2-5/16 5/8 x 3/16** 5/8 X 1/2 3.3SFX2-3/8 5/8 x 3/16** 5/8 X 1/2 3.1SFX2-7/16 5/8 x 3/16** 5/8 X 1/2 3.0SFX2-1/2 5/8 x 3/16** 5/8 X 1/2 2.9SFX2-9/16 5/8 x 1/16** 5/8 X 3/8 2.7SFX2-5/8 5/8 x 1/16** 5/8 X 3/8 2.6SFX2-11/16 5/8 x 1/16** 5/8 X 3/8 2.5SFX2-3/4 5/8 x 1/16** 5/8 X 3/8 2.3SFX2-13/16 3/4 x 1/16** 3/4 x 7/16 2.2

BU

SH

ING

S &

HU

BS

13

QD BUSHINGS

QD BUSHINGS STANDARD STOCK BORES (INCHES)Bushing # Keyseat Key Wt

SF SFX2-7/8 3/4 x 1/16** 3/4 x 7/16 2.1

SFX2-15/16 3/4 x 1/32** 3/4 x 13/32 2.0

E

EX7/8 3/16 X 3/32 3/16 X 3/16 10.5EX15/16 1/4 x 1/8 1/4 X 1/4 10.6EX1 1/4 x 1/8 1/4 X 1/4 10.4EX1-1/16 1/4 x 1/8 1/4 X 1/4 10.4EX1-1/8 1/4 x 1/8 1/4 X 1/4 10.4EX1-3/16 1/4 x 1/8 1/4 X 1/4 10.3EX1-1/4 1/4 x 1/8 1/4 X 1/4 10.3EX1-5/16 5/16 x 5/32 5/16 X5/16 10.3EX1-3/8 5/16 x 5/32 5/16 X5/16 10.1EX1-7/16 3/8 x 3/16 3/8 X 3/8 10.0EX1-1/2 3/8 x 3/16 3/8 X 3/8 10.1EX1-9/16 3/8 x 3/16 3/8 X 3/8 9.8EX1-5/8 3/8 x 3/16 3/8 X 3/8 9.6EX1-11/16 3/8 x 3/16 3/8 X 3/8 9.7EX1-3/4 3/8 x 3/16 3/8 X 3/8 9.5EX1-13/16 1/2 x 1/4 1/2 X 1/2 9.3EX1-7/8 1/2 x 1/4 1/2 X 1/2 9.1EX1-15/16 1/2 x 1/4 1/2 X 1/2 9.1EX2 1/2 x 1/4 1/2 X 1/2 8.9EX2-1/16 1/2 x 1/4 1/2 X 1/2 8.7EX2-1/8 1/2 x 1/4 1/2 X 1/2 8.6EX2-3/16 1/2 x 1/4 1/2 X 1/2 8.5EX2-1/4 1/2 x 1/4 1/2 X 1/2 8.3EX2-1/4KW5/8 5/8 x 5/16 5/8 X 5/8 7.6EX2-5/16 5/8 x 5/16 5/8 X 5/8 8.2EX2-3/8 5/8 x 5/16 5/8 X 5/8 8.0EX2-7/16 5/8 x 5/16 5/8 X 5/8 7.9EX2-1/2 5/8 x 5/16 5/8 X 5/8 7.9EX2-9/16 5/8 x 5/16 5/8 X 5/8 7.5EX2-5/8 5/8 x 5/16 5/8 X 5/8 7.6EX2-11/16 5/8 x 5/16 5/8 X 5/8 7.4EX2-3/4 5/8 x 5/16 5/8 X 5/8 7.1EX2-13/16 3/4 x 3/8 3/4 x 3/4 6.8EX2-7/8 3/4 x 3/8 3/4 x 3/4 6.6EX2-15/16 3/4 x1/8** 3/4 x 1/2 6.8EX3 3/4 x1/8** 3/4 x 1/2 6.8EX3-1/16 3/4 x1/8** 3/4 x 1/2 6.5EX3-1/8 3/4 x1/8** 3/4 x 1/2 6.2EX3-3/16 3/4 x1/8** 3/4 x 1/2 6.0EX3-1/4 3/4 x1/8** 3/4 x 1/2 5.8EX3-5/16 7/8 x 1/16** 7/8 X 1/2 5.7EX3-3/8 7/8 x 1/16** 7/8 X 1/2 5.5EX3-7/16 7/8 x 1/16** 7/8 X 1/2 5.5EX3-1/2 7/8 x 1/16** 7/8 X 1/2 5.0

F

FX1 1/4 x 1/8 1/4 X 1/4 18.0FX1-1/16 1/4 x 1/8 1/4 X 1/4 17.9FX1-1/8 1/4 x 1/8 1/4 X 1/4 17.9FX1-3/16 1/4 x 1/8 1/4 X 1/4 17.6FX1-1/4 1/4 x 1/8 1/4 X 1/4 17.5FX1-5/16 5/16 x 5/32 5/16 X5/16 17.4FX1-3/8 5/16 x 5/32 5/16 X5/16 17.3FX1-7/16 3/8 x 3/16 3/8 X 3/8 17.2FX1-1/2 3/8 x 3/16 3/8 X 3/8 17.0FX1-9/16 3/8 x 3/16 3/8 X 3/8 16.9FX1-5/8 3/8 x 3/16 3/8 X 3/8 16.8FX1-11/16 3/8 x 3/16 3/8 X 3/8 16.7FX1-3/4 3/8 x 3/16 3/8 X 3/8 16.5FX1-13/16 1/2 x 1/4 1/2 X 1/2 16.3FX1-7/8 1/2 x 1/4 1/2 X 1/2 16.1FX1-15/16 1/2 x 1/4 1/2 X 1/2 15.9FX2 1/2 x 1/4 1/2 X 1/2 15.7FX2-1/16 1/2 x 1/4 1/2 X 1/2 15.5FX2-1/8 1/2 x 1/4 1/2 X 1/2 15.3


F

FX2-3/16 1/2 x 1/4 1/2 X 1/2 15.1FX2-1/4 1/2 x 1/4 1/2 X 1/2 15.0FX2-1/4KW5/8 5/8 x 5/16 5/8 X 5/8 15.0FX2-5/16 5/8 x 5/16 5/8 X 5/8 14.7FX2-3/8 5/8 x 5/16 5/8 X 5/8 14.5FX2-7/16 5/8 x 5/16 5/8 X 5/8 14.3FX2-1/2 5/8 x 5/16 5/8 X 5/8 14.0FX2-9/16 5/8 x 5/16 5/8 X 5/8 13.8FX2-5/8 5/8 x 5/16 5/8 X 5/8 13.5FX2-11/16 5/8 x 5/16 5/8 X 5/8 13.3FX2-3/4 5/8 x 5/16 5/8 X 5/8 13.1FX2-13/16 3/4 x 3/8 3/4 x 3/4 12.8FX2-7/8 3/4 x 3/8 3/4 x 3/4 11.7FX2-15/16 3/4 x 3/8 3/4 x 3/4 12.2FX3 3/4 x 3/8 3/4 x 3/4 11.2FX3-1/16 3/4 x 3/8 3/4 x 3/4 11.7FX3-1/8 3/4 x 3/8 3/4 x 3/4 11.4FX3-3/16 3/4 x 3/8 3/4 x 3/4 11.1FX3-1/4 3/4 x 3/8 3/4 x 3/4 10.8FX3-5/16 7/8 x 3/16** 7/8 X 5/8 11.0FX3-3/8 7/8 x 3/16** 7/8 X 5/8 10.7FX3-7/16 7/8 x 3/16** 7/8 X 5/8 10.4FX3-1/2 7/8 x 3/16** 7/8 X 5/8 10.1FX3-9/16 7/8 x 3/16** 7/8 X 5/8 9.8FX3-5/8 7/8 x 3/16** 7/8 X 5/8 9.4FX3-11/16 7/8 x 3/16** 7/8 X 5/8 9.1FX3-3/4 7/8 x 3/16** 7/8 X 5/8 8.8FX3-13/16 1 x 1/8**

11 X 5/8 8.5

FX3-7/8 x 1/8**1

1 X 5/8 8.2FX3-15/16 x 1/8** 1 X 5/8 7.8FX4 No K.S --- 7.0

J

JX1-7/16 3/8 x 3/16 3/8 X 3/8 27.7JX1-1/2 3/8 x 3/16 3/8 X 3/8 27.6JX1-9/16 3/8 x 3/16 3/8 X 3/8 27.4JX1-5/8 3/8 x 3/16 3/8 X 3/8 27.3JX1-11/16 3/8 x 3/16 3/8 X 3/8 27.1JX1-3/4 3/8 x 3/16 3/8 X 3/8 26.9JX1-13/16 1/2 x 1/4 1/2 X 1/2 26.7JX1-7/8 1/2 x 1/4 1/2 X 1/2 26.4JX1-15/16 1/2 x 1/4 1/2 X 1/2 26.2JX2 1/2 x 1/4 1/2 X 1/2 26.0JX2-1/16 1/2 x 1/4 1/2 X 1/2 25.6JX2-1/8 1/2 x 1/4 1/2 X 1/2 25.5JX2-3/16 1/2 x 1/4 1/2 X 1/2 25.2JX2-1/4 1/2 x 1/4 1/2 X 1/2 25.1JX2-5/16 5/8 x 5/16 5/8 X 5/8 24.4JX2-3/8 5/8 x 5/16 5/8 X 5/8 24.5JX2-7/16 5/8 x 5/16 5/8 X 5/8 24.3JX2-1/2 5/8 x 5/16 5/8 X 5/8 23.9JX2-9/16 5/8 x 5/16 5/8 X 5/8 23.5JX2-5/8 5/8 x 5/16 5/8 X 5/8 23.4JX2-11/16 5/8 x 5/16 5/8 X 5/8 23.0JX2-3/4 5/8 x 5/16 5/8 X 5/8 22.7JX2-13/16 3/4 x 3/8 3/4 x 3/4 22.2JX2-7/8 3/4 x 3/8 3/4 x 3/4 21.9JX2-15/16 3/4 x 3/8 3/4 x 3/4 21.7JX3 3/4 x 3/8 3/4 x 3/4 21.3JX3-1/16 3/4 x 3/8 3/4 x 3/4 20.9JX3-1/8 3/4 x 3/8 3/4 x 3/4 20.6JX3-3/16 3/4 x 3/8 3/4 x 3/4 20.3JX3-1/4 3/4 x 3/8 3/4 x 3/4 19.8JX3-5/16 7/8 x 7/16 7/8 X 7/8 19.5JX3-3/8 7/8 x 7/16 7/8 X 7/8 19.0JX3-7/16 7/8 x 7/16 7/8 X 7/8 18.6JX3-1/2 7/8 x 7/16 7/8 X 7/8 18.3


J

JX3-9/16 7/8 x 7/16 7/8 X 7/8 16.8JX3-5/8 7/8 x 7/16 7/8 X 7/8 17.4JX3-11/16 7/8 x 7/16 7/8 X 7/8 17.1JX3-3/4 7/8 x 7/16 7/8 X 7/8 16.6JX3-13/16 1 x 1/2 1 X 1 17.1JX3-7/8 1 x 3/8** 1 X 7/8 16.6JX3-15/16 1 x 3/8** 1 X 7/8 16.1JX4 1 x 1/8** 1 X 5/8 15.6JX4-1/16 1 x 1/8** 1 X 5/8 15.2JX4-1/8 1 x 1/8** 1 X 5/8 14.7JX4-3/16 1 x 1/8** 1 X 5/8 14.3JX4-1/4 1 x 1/8** 1 X 5/8 13.8JX4-5/16 1 x 1/8** 1 X 5/8 13.3JX4-3/8 1 x 1/8** 1 X 5/8 12.9JX4-7/16 1 x 1/8** 1 X 5/8 11.5JX4-1/2 1 x 1/8** 1 X 5/8 11.8

M

MX2 1/2 x 1/4 1/2 X 1/2 59.2MX2-1/8 1/2 x 1/4 1/2 X 1/2 58.5MX2-3/16 1/2 x 1/4 1/2 X 1/2 58.1MX2-1/4 1/2 x 1/4 1/2 X 1/2 57.7MX2-3/8 5/8 x 5/16 5/8 X 5/8 56.9MX2-7/16 5/8 x 5/16 5/8 X 5/8 56.5MX2-1/2 5/8 x 5/16 5/8 X 5/8 56.1MX2-9/16 5/8 x 5/16 5/8 X 5/8 55.7MX2-5/8 5/8 x 5/16 5/8 X 5/8 55.2MX2-11/16 5/8 x 5/16 5/8 X 5/8 54.7MX2-3/4 5/8 x 5/16 5/8 X 5/8 54.3MX2-13/16 3/4 x 3/8 3/4 x 3/4 53.8MX2-7/8 3/4 x 3/8 3/4 x 3/4 53.3MX2-15/16 3/4 x 3/8 3/4 x 3/4 52.8MX3 3/4 x 3/8 3/4 x 3/4 52.3MX3-1/8 3/4 x 3/8 3/4 x 3/4 51.2MX3-3/16 3/4 x 3/8 3/4 x 3/4 50.7MX3-1/4 3/4 x 3/8 3/4 x 3/4 50.1MX3-5/16 7/8 x 7/16 7/8 X 7/8 49.6MX3-3/8 7/8 x 7/16 7/8 X 7/8 49.0MX3-7/16 7/8 x 7/16 7/8 X 7/8 48.4MX3-1/2 7/8 x 7/16 7/8 X 7/8 47.8MX3-5/8 7/8 x 7/16 7/8 X 7/8 49.2MX3-11/16 7/8 x 7/16 7/8 X 7/8 48.5MX3-3/4 7/8 x 7/16 7/8 X 7/8 48.3MX3-13/16 1 x 1/2 1 X 1 47.2MX3-7/8 1 x 1/2 1 X 1 46.4MX3-15/16 1 x 1/2 1 X 1 45.9MX4 1 x 1/2 1 X 1 45.4MX4-1/8 1 x 1/2 1 X 1 43.9MX4-3/16 1 x 1/2 1 X 1 43.1MX4-1/4 1 x 1/2 1 X 1 42.2MX4-5/16 1 x 1/2 1 X 1 42.1MX4-3/8 1 x 1/2 1 X 1 40.9MX4-7/16 1 x 1/2 1 X 1 39.9MX4-1/2 1 x 1/2 1 X 1 39.5MX4-9/16 1-1/4 x 5/8 1-1/4 X 1-1/4 38.2MX4-5/8 1-1/4 x 5/8 1-1/4 X 1-1/4 37.7MX4-11/16 1-1/4 x 5/8 1-1/4 X 1-1/4 37.3MX4-3/4 1-1/4 x 5/8 1-1/4 X 1-1/4 35.0MX4-13/16 1-1/4 x 5/8 1-1/4 X 1-1/4 34.0MX4-7/8 1-1/4 x 1/4** 1-1/4 X 7/8 34.1MX4-15/16 1-1/4 x 1/4** 1-1/4 X 7/8 42.3MX5 1-1/4 x 1/4** 1-1/4 X 7/8 32.6MX5-1/8 1-1/4 x 1/4** 1-1/4 X 7/8 30.9MX5-3/16 1-1/4 x 1/4** 1-1/4 X 7/8 30.1MX5-1/4 1-1/4 x 1/4** 1-1/4 X 7/8 29.1MX5-5/16 1-1/4 x 1/4** 1-1/4 X 7/8 29.0MX5-3/8 1-1/4 x 1/4** 1-1/4 X 7/8 27.3

* Bushings with 1/2" wide keyway will be shipped unless the 5/8" wide keyway is specified when ordering. ** Shallow keyseat Baldor supplies the key All 1/2" bore sizes are stocked without a keyseat. A standard keyseat 1/8" X 1/16" is available upon request. Keys not supplied for standard keyseat dimension.

BU

SH

ING

S &

HU

BS

14

QD BUSHINGS

QD BUSHINGS STANDARD STOCK BORES (INCHES)

* Bushings with 1/2" wide keyway will be shipped unless the 5/8" wide keyway is specified when ordering. ** Shallow keyseat Baldor supplies the key All 1/2" bore sizes are stocked without a keyseat. A standard keyseat 1/8" X 1/16" is available upon request. Keys not supplied for standard keyseat dimension. Others sizes manufactured in ductile iron.

Bushing # Keyseat Key WtM

MX5-7/16 1-1/4 x 1/4** 1-1/4 X 7/8 26.5MX5-1/2 1-1/4 x 1/4** 1-1/4 X 7/8 25.9

N

NX2-15/16 3/4 x 3/8 3/4 x 3/4 77.2NX3 3/4 x 3/8 3/4 x 3/4 76.6NX3-1/4 3/4 x 3/8 3/4 x 3/4 74.0NX3-5/16 7/8 x 7/16 7/8 X 7/8 73.3NX3-3/8 7/8 x 7/16 7/8 X 7/8 72.6NX3-7/16 7/8 x 7/16 7/8 X 7/8 71.9NX3-1/2 7/8 x 7/16 7/8 X 7/8 71.2NX3-5/8 7/8 x 7/16 7/8 X 7/8 74.6NX3-11/16 7/8 x 7/16 7/8 X 7/8 69.0NX3-3/4 7/8 x 7/16 7/8 X 7/8 68.2NX3-7/8 1 x 1/2 1 X 1 66.6NX3-15/16 1 x 1/2 1 X 1 65.8NX4 1 x 1/2 1 X 1 65.0NX4-3/16 1 x 1/2 1 X 1 62.4NX4-1/8 1 x 1/2 1 X 1 63.3NX4-1/4 1 x 1/2 1 X 1 61.6NX4-5/16 1 x 1/2 1 X 1 66.5NX4-3/8 1 x 1/2 1 X 1 59.8NX4-7/16 1 x 1/2 1 X 1 58.9NX4-1/2 1 x 1/2 1 X 1 57.9NX4-9/16 1-1/4 x 5/8 1-1/4 X 1-1/4 62.5NX4-5/8 1-1/4 x 5/9 1-1/4 X 1-1/4 56.0NX4-11/16 1-1/4 x 5/10 1-1/4 X 1-1/4 55.1NX4-3/4 1-1/4 x 5/11 1-1/4 X 1-1/4 54.1NX4-7/8 1-1/4 x 5/12 1-1/4 X 1-1/4 52.1NX4-15/16 1-1/4 x 5/13 1-1/4 X 1-1/4 51.1NX5 1-1/4 x 5/14 1-1/4 X 1-1/4 50.1NX5-1/8 1-1/4 x 1/4** 1-1/4 X 7/8 48.0NX5-3/16 1-1/4 x 1/4** 1-1/4 X 7/8 46.9NX5-1/4 1-1/4 x 1/4** 1-1/4 X 7/8 49.9NX5-5/16 1-1/4 x 1/4** 1-1/4 X 7/8 48.8NX5-3/8 1-1/4 x 1/4** 1-1/4 X 7/8 47.8NX5-7/16 1-1/4 x 1/4** 1-1/4 X 7/8 46.8NX5-1/2 1-1/4 x 1/4** 1-1/4 X 7/8 45.4NX5-11/16 1-1/2 x 1/4** 1-1/2 X 1 48.0NX5-3/4 1-1/2 x 1/4** 1-1/2 X 1 43.6NX5-7/8 1-1/2 x 1/4** 1-1/2 X 1 38.5NX5-15/16 1-1/2 x 1/8** 1-1/2 X 7/8 39.3NX6 1-1/2 x 1/8** 1-1/2 X 7/8 39.0

P

PX2-15/16 3/4 x 3/8 3/4 x 3/4 130.3PX3-3/16 3/4 x 3/8 3/4 x3/4 127.4PX3-1/4 3/4 x 3/8 3/4 x3/4 129.9PX3-3/8 7/8 x 7/16 7/8 X 7/8 125.1PX3-7/16 7/8 x 7/16 7/8 X 7/8 124.2PX3-1/2 7/8 x 7/16 7/8 X 7/8 123.4PX3-5/8 7/8 x 7/16 7/8 X 7/8 121.7PX3-3/4 7/8 x 7/16 7/8 X 7/8 119.9PX3-7/8 1 x 1/2 1 X 1 118.1PX3-15/16 1 x 1/2 1 X 1 117.2PX4 1 x 1/2 1 X 1 116.2PX4-3/16 1 x 1/2 1 X 1 113.5PX4-1/4 1 x 1/2 1 X 1 112.3PX4-3/8 1 x 1/2 1 X 1 110.2PX4-7/16 1 x 1/2 1 X 1 109.2PX4-1/2 1 x 1/2 1 X 1 108.1PX4-5/8 1-1/4 x 5/8 1-1/4 X 1-1/4 105.9PX4-11/16 1-1/4 x 5/8 1-1/4 X 1-1/4 104.8PX4-3/4 1-1/4 x 5/8 1-1/4 X 1-1/4 103.7PX4-7/8 1-1/4 x 5/8 1-1/4 X 1-1/4 101.4PX4-15/16 1-1/4 x 5/8 1-1/4 X 1-1/4 110.0


P

PX5 1-1/4 x 5/8 1-1/4 X 1-1/4 106.5PX5-1/8 1-1/4 x 5/8 1-1/4 X 1-1/4 96.6PX5-1/4 1-1/4 x 5/8 1-1/4 X 1-1/4 94.1PX5-5/16 1-1/4 x 5/8 1-1/4 X 1-1/4 97.5PX5-3/8 1-1/4 x 5/8 1-1/4 X 1-1/4 91.6PX5-7/16 1-1/4 x 5/8 1-1/4 X 1-1/4 90.3PX5-1/2 1-1/4 x 5/8 1-1/4 X 1-1/4 88.9PX5-3/4 1-1/2 x 1/4** 1-1/2 X 1 95.0PX5-7/8 1-1/2 x 1/4** 1-1/2 X 1 80.8PX5-15/16 1-1/2 x 1/4** 1-1/2 X 1 91.0PX6 1-1/2 x 1/4** 1-1/2 X 1 77.9PX6-1/16 1-1/2 x 1/4** 1-1/2 X 1 76.5PX6-1/4 1-1/2 x 1/4** 1-1/2 X 1 72.1PX6-7/16 1-1/2 x 1/4** 1-1/2 X 1 79.0PX6-1/2 1-1/2 x 1/4** 1-1/2 X 1 66.0PX6-3/4 1-3/4 x 1/8** 1-3/4 X 1 73.0PX6-7/8 1-3/4 x 1/8** 1-3/4 X 1 58.0PX6-15/16 1-3/4 x 1/8** 1-3/4 X 1 54.7PX7 1-3/4 x 1/8** 1-3/4 X 1 53.1

W

WX4-7/16 1 x 1/2 1 x 1 239.8WX4-1/4 1 X 1/2 1 x 1 248.3WX4-11/16 1-1/4 x 5/8 1-1/4 X 1-1/4 239.3WX4-5/8 1-1/4 x 5/8 1-1/4 X 1-1/4 275.0WX4-3/4 1-1/4 x 5/8 1-1/4 X 1-1/4 233.2WX4-15/16 1-1/4 x 5/8 1-1/4 X 1-1/4 275.0WX5 1-1/4 x 5/8 1-1/4 X 1-1/4 265.0WX5-1/4 1-1/4 x 5/8 1-1/4 X 1-1/4 244.0WX5-7/16 1-1/4 x 5/8 1-1/4 X 1-1/4 255.0WX5-1/2 1-1/4 x 5/8 1-1/4 X 1-1/4 223.0WX5-11/16 1-1/4 x 5/8 1-1/4 X 1-1/4 255.0WX5-3/4 1-1/2 x 3/4 1-1/2 X 1-1/2 230.0WX7-7/8 1-1/2 x 3/4 2 X 1 200.0WX5-15/16 1-1/2 x 3/4 1-1/2 X 1-1/2 203.7WX6 1-1/2 x 3/4 1-1/2 X 1-1/2 237.0WX6-1/4 1-1/2 x 3/4 1-1/2 X 1-1/2 194.9WX6-7/16 1-1/2 x 3/4 1-1/2 X 1-1/2 189.3WX6-1/2 1-1/2 x 3/4 1-1/2 X 1-1/2 187.4WX6-3/4 1-3/4 x 3/4 1-3/4 X 1-1/2 179.8WX6-7/8 1-3/4 x 3/4 1-3/4 X 1-1/2 198.0WX6-15/16 1-3/4 x 3/4 1-3/4 X 1-1/2 185.0WX7 1-3/4 x 3/4 1-3/4 X 1-1/2 171.8WX7-1/8 1-3/4 x 3/4 1-3/4 X 1-1/2 170.0WX7-1/4 1-3/4 x 3/4 1-3/4 X 1-1/2 175.0WX7-3/8 1-3/4 x 3/4 1-3/4 X 1-1/2 161.7WX7-7/16 1-3/4 x 3/4 1-3/4 X 1-1/2 160.0WX7-1/2 1-3/4 x 3/4 1-3/4 X 1-1/2 154.9WX7-3/4 2 x 1/4** 2 X 1 163.0WX8 2 x 1/4** 2 X 1 172.0WX8-1/4 2 x 1/4** 2 X 1 153.0WX8-1/2 2 x 1/4** 2 X 1 133.0WX8-1/2KW2X3/8 2 x 3/8** 2 X 1-1/8 133.0


S

SX5-1/2 1-1/4 x 5/8 1-1/4 X 1-1/4 485.0SX5-3/4 1-1/2 x 3/4 1-1/2 X 1-1/2 476.6SX5-7/8 1-1/2 x 3/4 1-1/2 X 1-1/2 472.1SX5-15/16 1-1/2 x 3/4 1-1/2 X 1-1/2 470.2SX6 1-1/2 x 3/4 1-1/2 X 1-1/2 447.0SX6-1/4 1-1/2 x 3/4 1-1/2 X 1-1/2 458.6SX6-7/16 1-1/2 x 3/4 1-1/2 X 1-1/2 451.6SX6-1/2 1-1/2 x 3/4 1-1/2 X 1-1/2 449.3SX6-3/4 1-3/4 x 3/4 1-3/4 X 1-1/2 440.6SX6-15/16 1-3/4 x 3/4 1-3/4 X 1-1/2 430.8SX7 1-3/4 x 3/4 1-3/4 X 1-1/2 425.5SX7-1/4 1-3/4 x 3/4 1-3/4 X 1-1/2 394.0SX7-1/2 1-3/4 x 3/4 1-3/4 X 1-1/2 404.8SX7-3/4 2 x 3/4 2 X 1-1/2 392.1SX7-7/8 2 x 3/4 2 X 1-1/2 386.6SX8 2 x 3/4 2 X 1-1/2 378.5SX8-1/4 2 x 3/4 2 X 1-1/2 367.3SX8-1/2 2 x 3/4 2 X 1-1/2 353.8SX8-1/2KW2X1 2 x 1 2 X 1-3/4 346.0SX8-1/2KW2X3/4 2 x 3/4 2 X 1-1/2 346.0SX8-3/4 2 x 3/4 2 X 1-1/2 340.1SX8-7/8 2 x 3/4 2 X 1-1/2 333.4SX9 2 x 3/4 2 X 1-1/2 326.1SX9-1/4 2-1/2 x 1/2** 2-1/2 X 1-3/8 288.0SX9-3/8 2-1/2 x 1/2** 2-1/2 X 1-3/8 303.3SX9-1/2 2-1/2 x 1/2** 2-1/2 X 1-3/8 296.4SX9-3/4 2-1/2 x 3/8** 2-1/2 X 1-1/4 281.1SX9-3/4KW2X1/4 2 x 1/4 --- 256 .0SX9-7/8 2-1/2 x 3/8** 2-1/2 X 1-1/8 271.4SX10 2-1/2 x 1/4** 2-1/2 X 1-1/8 241.0

BU

SH

ING

S &

HU

BS

15

QD BUSHINGS

QD BUSHINGS STANDARD STOCK BORES (MILLIMETERS)Note:Inmetricbores,akeyisnotsuppliedforshallowkeyway.ThemetricsystemdoesnotrefertokeyseatorkeywaydimensionsasdoestheEnglishsystem;instead,dimensionsaregivenforthekeyitself.Fornominaldiameterupto22mm,thekeyissquareinshape.Fornominaldiameterover22mm,thekeyisrectangularinshape.ThismeetsISOstandards.

Bushing # Keyseat Key Weight

L

LX14MM 5 x 2.3 5 x 5 0.9LX15MM 5 x 2.3 5 x 5 0.9LX16MM 5 x 2.3 5 x 5 0.9LX18MM 6 x 2.8 6 x 6 0.9LX19MM 6 x 2.8 6 x 6 0.9LX20MM 6 x 2.8 6 x 6 0.9LX22MM 6 x 2.8 6 x 6 0.8LX24MM 8 x 3.3 8 x 7 0.8LX25MM 8 x 3.3 8 x 7 0.8LX28MM 8 x 3.3 8 x 7 0.7LX30MM 8 x 3.3 8 x 7 0.6LX32MM 10 x 3.3 10 x 8 0.6LX35MM 10 x 1.3** 10 X 6** 0.5LX38MM 10 x 1.3** 10 X 6** 0.3

JA

JAX15MM 5 x 2.3 5 x 5 0.5JAX16MM 6 x 2.8 6 x 6 0.5JAX18MM 6 x 2.8 6 x 6 0.5JAX19MM 6 x 2.8 6 x 6 0.4JAX20MM 6 x 2.8 6 x 6 0.4JAX22MM 6 x 2.8 6 x 6 0.4JAX24MM 8 x 2.3** 8 x 6** 0.4JAX25MM 8 x 2.3** 8 x 6** 0.4JAX28MM 8 x 1.3** 8 x 5** 0.4

SH

SHX14MM 5 x 2.3 5 x 5 1.2SHX15MM 5 x 2.3 5 x 5 1.1SHX16MM 5 x 2.3 5 x 5 1.1SHX18MM 6 x 2.8 6 x 6 1.1SHX19MM 6 x 2.8 6 x 6 1.1SHX20MM 6 x 2.8 6 x 6 1.1SHX22MM 6 x 2.8 6 x 6 1.0SHX24MM 8 x 3.3 8 x 7 1.0SHX25MM 8 x 3.3 8 x 7 1.0SHX28MM 8 x 3.3 8 x 7 0.9SHX30MM 8 x 3.3 8 x 7 0.9SHX32MM 10 x 3.3 10 x 8 0.8SHX35MM 10 x 3.3 10 x 8 0.7SHX38MM 10 x 2.3** 10 x 7** 0.7SHX40MM No. k.s. No K.S. 0.6

SD

S

SDSX14MM 5 x 2.3 5 x 5 1.7SDSX15MM 5 x 2.3 5 x 5 1.7SDSX16MM 5 x 2.3 5 x 5 1.7SDSX18MM 6 x 2.8 6 x 6 1.7SDSX19MM 6 x 2.8 6 x 6 1.7SDSX20MM 6 x 2.8 6 x 6 1.7SDSX22MM 6 x 2.8 6 x 6 1.6SDSX24MM 8 x 3.3 8 x 7 1.5SDSX25MM 8 x 3.3 8 x 7 1.5SDSX28MM 8 x 3.3 8 x 7 1.5SDSX30MM 8 x 3.3 8 x 7 1.4SDSX32MM 10 x 3.3 10 x 8 1.4SDSX35MM 10 x 3.3 10 x 8 1.3SDSX38MM 10 x 3.3 10 x 8 1.2SDSX40MM 12 x 3.3 12 x 8 1.1SDSX42MM 12 x 3.3 12 x 8 1.1

SD

SDX14MM 5 x 2.3 5 x 5 2.2SDX15MM 5 x 2.3 5 x 5 2.1SDX16MM 5 x 2.3 5 x 5 2.1SDX18MM 6 x 2.8 6 x 6 2.0SDX19MM 6 x 2.8 6 x 6 2.1SDX20MM 6 x 2.8 6 x 6 2.1


SD

SDX22MM 6 x 2.8 6 x 6 2.0SDX24MM 8 x 3.3 8 x 7 1.9SDX25MM 8 x 3.3 8 x 7 1.9SDX28MM 8 x 3.3 8 x 7 1.8SDX30MM 8 x 3.3 8 x 7 1.8SDX32MM 10 x 3.3 11 x 3.3 1.7SDX35MM 10 x 3.3 11 x 3.3 1.6SDX38MM 10 x 3.3 11 x 3.3 1.5SDX40MM 12 x 3.3 12 x 8 1.4SDX42MM 12 x 3.3 12 x 8 1.3SDX48MM 14 X 3.8 14 X 9 1.2

SK

SKX14MM 5 x 2.3 5 x 5 3.6SKX15MM 5 x 2.3 5 x 5 3.7SKX16MM 5 x 2.3 5 x 5 3.6SKX18MM 6 x 2.8 6 x 6 3.6SKX19MM 6 x 2.8 6 x 6 3.5SKX20MM 6 x 2.8 6 x 6 3.5SKX22MM 6 x 2.8 6 x 6 3.4SKX24MM 8 x 3.3 8 x 7 3.4SKX25MM 8 x 3.3 8 x 7 3.4SKX28MM 8 x 3.3 8 x 7 3.3SKX30MM 8 x 3.3 8 x 7 3.2SKX32MM 10 x 3.3 10 x 8 3.1SKX35MM 10 x 3.3 10 x 8 3.0SKX38MM 10 x 3.3 10 x 8 2.9SKX40MM 12 x 3.3 12 x 8 2.8SKX42MM 12 x 3.3 12 x 8 2.7SKX45MM 14 x 3.8 14 x 9 2.6SKX48MM 14 x 3.8 14 x 9 2.4SKX50MM 14 x 3.8 14 x 9 2.3SKX55MM 16 x 4.3 16 x 10 2.0SKX60MM 18 x 3.4** 18 x 10** 1.6

SF

SFX20MM 6 X 2.8 6 X 6 4.6SFX24MM 8 X 3.3 8 X 7 4.8SFX25MM 8 x 3.3 8 x 7 4.8SFX28MM 8 x 3.3 8 x 7 4.7SFX30MM 8 x 3.3 8 x 7 4.6SFX32MM 10 x 3.3 10 x 8 4.5SFX35MM 10 x 3.3 10 x 8 4.4SFX38MM 10 x 3.3 10 x 8 4.3SFX40MM 12 x 3.3 12 x 8 4.2SFX42MM 12 x 3.3 12 x 8 4.1SFX45MM 14 x 3.8 14 x 9 3.9SFX48MM 14 x 3.8 14 x 9 3.7SFX50MM 14 x 3.8 14 x 9 3.6SFX55MM 16 x 4.3 16 x 10 3.3SFX60MM 18 x 4.4 18 x 11 2.9SFX65MM 18 x 4.4 18 x 11 2.5

E

EX35MM 10 x 3.3 10 x 8 10.0EX38MM 10 x 3.3 10 x 8 9.9EX40MM 12 x 3.3 12 x 8 9.9EX42MM 12 x 3.3 12 x 8 9.7EX45MM 14 x 3.8 14 x 9 9.4EX48MM 14 x 3.8 14 x 9 9.2EX50MM 14 x 3.8 14 x 9 9.0EX55MM 16 x 4.3 16 x 10 8.6EX60MM 18 x 4.4 18 x 11 8.1EX65MM 19 x 4.4 19 x 11 7.6EX70MM 20 x 4.9 20 x 12 7.1EX75MM 20 x 4.9 20 x 12 6.5


EX80MM 22 x 5.4 22 x 14 5.8EX85MM 22 X 5.4 22 X 14 5.6

F

FX45MM 14 x 3.8 14 x 9 16.4FX48MM 14 x 3.8 14 x 9 16.1FX50MM 14 x 3.8 14 x 9 15.8FX55MM 16 x 4.3 16 x 10 15.2FX60MM 18 x 4.4 18 x 11 14.5FX65MM 18 x 4.4 18 x 11 13.8FX70MM 20 x 4.9 20 x 12 13.1FX75MM 20 x 4.9 20 x 12 12.2FX80MM 22 x 5.4 22 x 14 11.3FX85MM 22 x 5.4 22 x 14 10.2FX90MM 25 x 5.4 25 x 14 9.2FX95MM 25 x 5.4 25 x 14 8.2FX100MM No. k.s. No K.S. 7.3

J

JX50MM 14 x 3.8 14 x 9 26.1JX55MM 16 x 4.3 16 x 10 25.3JX60MM 18 x 4.4 18 x 11 24.5JX65MM 18 x 4.4 18 x 11 23.7JX70MM 20 x 4.9 20 x 12 22.5JX75MM 20 x 4.9 20 x 12 21.7JX80MM 22 x 5.4 22 x 14 20.4JX85MM 22 x 5.4 22 x 14 19.4JX90MM 25 x 5.4 25 x 14 18.2JX95MM 25 x 5.4 25 x 14 16.8JX100MM 28 x 6.4 28 x 16 15.0JX110MM 28 x 5.4** 28 x 15** 12.2JX115MM 32 x 1.2** 32 x 11.8 ** 10.8

MMX70MM 20 X 4.9 20 X 12 54.0MX75MM 20 X 4.9 20 X 12 52.3MX80MM 22 X 5.4 22 X 5.4 55.0MX85MM 22 X 5.4 22 X 5.4 55.0MX90MM 25 x 5.4 25 x 14 51.4MX95MM 25 X 5.4 25 X 14 50.0MX100MM 28 x 6.4 28 x 16 46.8MX110MM 28 X 6.4 28 X 16 47.0MX115MM 32 x 7.4 32 x 18 39.9MX120MM 32 x 7.4 32 x 18 36.7MX125MM 32 X 7.4 32 X 18 33.5MX130MM 32 X 7.4 32 X 18 30.9

N

NX80MM 22 X 5.4 22 X 5.4 82.0NX90MM 25 x 5.4 25 x 14 75.0NX95MM 25 X 5.4 25 X 14 75.0NX100MM 28 x 6.4 28 x 16 72.0NX110MM 28 x 6.4 28 x 16 66.5NX120MM 32 x 7.4 32 x 18 60.8NX125MM 32 X 7.4 32 X 18 57.5NX130MM 32 X 7.4 32 X 18 57.5NX150MM 36 X 2.4** 36 X 14** 35.0

P

PX100MM 28 X 6.4 28 X 16 120.0PX110MM 28 X 6.4 28 X 16 119.0PX120MM 32 X 7.4 32 X 18 120.0PX130MM 32 x 7.4 32 x 18 107.0PX140MM 36 X 8.4 36 X 20 101.3PX145MM 36 X 8.4 36 X 20 95.7PX150MM 36 x 8.4 36 x 20 90.0PX160MM 40 X 9.4 40 X 22 90.0PX170MM 40 X 4.4** 40 X 17** 75.0

** Shallow keyseat Note: All Bushings up to sizes M are manufactured in ductile iron. For all bore sizes key not supplied.

BU

SH

ING

S &

HU

BS

16

BK2 BUSHINGS

BK2 BUSHING

Keyedonshaftandhubtoreduceshockonthecapscrews.

Mostlyusedforapplicationswithfrequentstopandstartorreverse needs.

ThetaperonallBK2Bushingsis3/4perfootondiameter.Type1manufacturedincastorductileiron,type2

manufactured in ductile iron only.100%interchangeablewithlicensedmanufacturers

products.BK2Bushingisthemostpreferredstyleforfanblades

assembly.HelpsduringblindInstallation.


EXAMPLE:P1X1-7/16

P1 X1-7/16

P1: BUSHINGSIZE

X1-1/16: BORESIZE(1-1/16") Inch bore sizes are designated with the

whole inch followed by the fraction. For example, a 1.5" diameter bore would be 1-1/2.

HOW TO ORDER

Type 1 Type 2

Part #

List Price

Mult. Sym.

Dimensions Bore range Cap Screws

Av. Wt. Lbs.

Wrench torque In-Lbs.L A E

BD M W G Type 1 Type 2 No. SizeLarg

EndSmall End

G 10.30 STB29 1 1/4 3/4 1.172 1.133 2 1 9/16 - 3/16 3/8 - 15/16 1 2 1/4-20 UNC X 5/8 .5 95

P1 17.90 STB29 1 15/16 13/32 1 17/32 1.9375 1.8555 3 2 7/16 3/8 7/32 1/2 - 1 7/16 1 1/2 - 1 3/4 3 5/16-18 UNC X 1 1.3 192

P2 19.60 STB29 2 15/16 13/32 2 17/32 1.9375 1.7930 3 2 7/16 3/8 7/32 3/4 - 1 7/16 1 1/2 - 1 3/4 3 5/16-18 UNC X 1 1.5 192

B 17.90 STB29 1 15/16 1/2 1 7/16 2.625 2.5567 3 11/16 3 1/8 1/2 7/32 1/2 - 1 15/16 2 - 2 7/16 3 5/16-18 UNC X 1 1/4 1.8 192

Q1 35.20 STB29 2 1/2 17/32 1 31/32 2.875 2.7657 4 1/8 3 3/8 1/2 7/32 3/4 - 2 1/16 2 1/8 - 2 11/16 3 3/8-16 UNC X 1 1/4 3.5 348

Q2 38.50 STB29 3 1/2 17/32 2 31/32 2.875 2.7032 4 1/8 3 3/8 1/2 7/32 1 - 2 1/16 2 1/8 - 2 5/8 3 3/8-16 UNC X 1 1/4 4.5 348

R1 87.00 STB29 2 7/8 5/8 2 1/4 4.000 3.8750 5 3/8 4 5/8 3/4 1/4 1 1/8 - 2 13/16 2 7/8 - 3 3/4 3 3/8-16 UNC X 1 3/4 7.5 348

R2 98.00 STB29 4 7/8 5/8 4 1/4 4.000 3.7500 5 3/8 4 5/8 3/4 1/4 1 3/8 - 2 13/16 2 7/8 - 3 5/8 3 3/8-16 UNC X 1 3/4 11 348

S1 173.00 STB29 4 3/8 3/4 3 5/8 4.625 4.4180 6 3/8 5 3/8 3/4 5/16 1 11/16 - 3 3/16 3 1/4 - 4 1/4 3 1/2-13 UNC X 2 1/4 13.5 840

S2 217.00 STB29 6 3/4 3/4 6 4.625 4.2696 6 3/8 5 3/8 3/4 5/16 1 7/8 - 3 3/16 3 1/4 - 4 3/16 3 1/2-13 UNC X 2 1/4 19 840

U0* 379.00 STB29 5 1/4 1 1/16 4 3/16 6.000 5.7656 8 3/8 7 1 1/4 7/16 2 3/8 - 3 1/16 - 3 5/8-11 UNC X 2 3/4 30 1680

U0* 379.00 STB29 4 15/16 3/4 4 3/16 6.000 5.7656 8 3/8 7 1 1/4 7/16 3 1/4 - 4 1/4 4 3/8 - 5 1/2 3 5/8-11 UNC X 2 3/4 27 1680

U1* 650.00 STB29 7 1/8 1 1/16 6 1/16 6.000 5.6485 8 3/8 7 1 1/4 7/16 2 3/8 - 4 1/4 4 3/8 - 5 1/2 3 5/8-11 UNC X 2 3/4 40 1680

W1* 1518.00 STB29 8 1/4 1 7/16 6 13/16 8.500 8.1016 12 1/2 10 1 1/4 7/16 3 3/8 - 6 3/16 6 1/4 - 7 7/16 4 3/4-10 UNC X 3 104 3000

NEW

BU

SH

ING

S &

HU

BS

17

BK2 BUSHINGSBushing Standard Bores Keyseat

G3/8 - 7/16 none1/2 - 9/16 1/8 X 7/165/8 - 11/16 -3/4 -13/16 - 7/8 3/16 X 3/3215/16 - 1 1/4 X 1/8

P1

1/2 - 9/16 1/8 X 1/165/8 - 21/32 - 11/16 - 3/4 - 25/32 - 13/16 - 7/8 - 3/16 X 3/3215/16 - 31/32 - 1 - 1 1/16 - 1 1/8 - 1 3/16 - 1 1/4 1/4 X 1/81 5/16 - 1 3/8 5/16 X 5/321 3/8 - 1 7/16 - 1 1/2 - 1 9/16 - 1 5/8 - 1 11/16 - 1 3/4 3/8 X 3/16

P23/4 - 13/16 - 7/8 3/16 X 3/3215/16 - 1 - 1 1/16 - 1 1/8 - 1 3/16 - 1 1/4 1/4 X 1/81 5/16 - 1 3/8 5/16 X 5/321 3/8 - 1 7/16 - 1 1/2 - 1 9/16 - 1 5/8 - 1 11/16 1 3/4 3/8 X 3/16

B

1/2 - 9/16 1/8 X 7/165/8 - 11/16 -3/4 -13/16 - 7/8 3/16 X 3/3215/16 - 1 - 1 1/16 - 1 1/8 - 1 3/16 - 1 1/4 1/4 X 1/81 5/16 - 1 3/8 5/16 X 5/321 3/8 - 1 7/16 - 1 1/2 - 1 9/16 - 1 5/8 - 1 11/16 1 3/4 3/8 X 3/161 13/16 - 1 7/8 - 1 15/16 - 2 - 2 1/16 - 2 1/8 - 2 3/16 - 2 1/4 1/2 X 1/42 5/16 - 2 3/8 - 2 7/16 5/8 X 5/16

Q1

3/4 - 13/16 - 7/8 3/16 X 3/3215/16 - 1 - 1 1/16 - 1 1/8 - 1 3/16 - 1 1/4 1/4 X 1/81 5/16 - 1 3/8 5/16 X 5/321 3/8 - 1 7/16 - 1 1/2 - 1 9/16 - 1 5/8 - 1 11/16 1 3/4 3/8 X 3/161 13/16 - 1 7/8 - 1 15/16 - 2 - 2 1/16 - 2 1/8 - 2 3/16 - 2 1/4 1/2 X 1/42 5/16 - 2 3/8 - 2 7/16 - 2 1/2 - 2 9/16 - 2 5/8 - 2 11/16 5/8 X 5/16

Q2

1 - 1 1/16 - 1 1/8 - 1 3/16 - 1 1/4 1/4 X 1/81 5/16 - 1 3/8 5/16 X 5/321 3/8 - 1 7/16 - 1 1/2 - 1 9/16 - 1 5/8 - 1 11/16 1 3/4 3/8 X 3/161 13/16 - 1 7/8 - 1 15/16 - 2 - 2 1/16 - 2 1/8 - 2 3/16 - 2 1/4 1/2 X 1/42 5/16 - 2 3/8 - 2 7/16 - 2 1/2 - 2 9/16 - 2 5/8 5/8 X 5/16

R1

1 1/8 - 1 3/16 - 1 1/4 1/4 X 1/81 5/16 - 1 3/8 5/16 X 5/321 3/8 - 1 7/16 - 1 1/2 - 1 9/16 - 1 5/8 - 1 11/16 -1 3/4 3/8 X 3/161 13/16 - 1 7/8 - 1 15/16 - 2 - 2 1/16 - 2 1/8 - 2 3/16 - 2 1/4 1/2 X 1/42 5/16 - 2 3/8 - 2 7/16 - 2 1/2 - 2 9/16 - 2 5/8 - 2 11/16 - 2 3/4 5/8 X 5/162 13/16 - 2 7/8 - 2 15/16 - 3 - 3 1/8 - 3 3/16 - 3 1/4 3/4 X 3/83 3/8 - 3 7/16 - 3 1/2 - 3 5/8 - 3 11/16 - 3 3/4 7/8 X 7/16

R2

1 3/8 5/16 X 5/321 3/8 - 1 7/16 - 1 1/2 - 1 9/16 - 1 5/8 - 1 11/16 - 1 3/4 3/8 X 3/161 13/16 - 1 7/8 - 1 15/16 - 2 - 2 1/16 - 2 1/8 - 2 3/16 - 2 1/4 1/2 X 1/42 5/16 - 2 3/8 - 2 7/16 - 2 1/2 - 2 9/16 - 2 5/8 - 2 11/16 - 2 3/4 5/8 X 5/162 13/16 - 2 7/8 - 2 15/16 - 3 - 3 1/8 - 3 3/16 - 3 1/4 3/4 X 3/83 3/8 - 3 7/16 - 3 1/2 - 3 5/8 7/8 X 7/16

S1

1 11/16 - 1 3/4 3/8 X 3/161 7/8 - 1 15/16 - 2 - 2 1/8 - 2 3/16 - 2 1/4 1/2 X 1/42 5/16 - 2 3/8 - 2 7/16 - 2 1/2 - 2 9/16 - 2 5/8 - 2 11/16 - 2 3/4 5/8 X 5/162 7/8 - 2 15/16 - 3 - 3 1/8 - 3 3/16 - 3 1/4 3/4 X 3/83 3/8 - 3 7/16 - 3 1/2 - 3 5/8 - 3 11/16 - 3 3/4 7/8 X 7/163 7/8 - 3 15/16 - 4 - 4 1/8 - 4 3/16 - 4 1/4 1 X 1/2

S2

1 7/8 - 1 15/16 - 2 - 2 1/8 - 2 3/16 - 2 1/4 1/2 X 1/42 5/16 - 2 3/8 - 2 7/16 - 2 1/2 - 2 9/16 - 2 5/8 - 2 11/16 - 2 3/4 5/8 X 5/162 7/8 - 2 15/16 - 3 - 3 1/8 - 3 3/16 - 3 1/4 3/4 X 3/83 3/8 - 3 7/16 - 3 1/2 - 3 5/8 - 3 11/16 - 3 3/4 7/8 X 7/163 7/8 - 3 15/16 - 4 - 4 1/8 - 4 3/16 1 X 1/2

U0*

2 3/8 - 2 7/16 - 2 1/2 - 2 9/16 - 2 5/8 - 2 11/16 - 2 3/4 5/8 X 5/162 7/8 - 2 15/16 - 3 - 3 1/8 - 3 3/16 - 3 1/4 3/4 X 3/83 3/8 - 3 7/16 - 3 1/2 - 3 5/8 - 3 11/16 - 3 3/4 7/8 X 7/163 7/8 - 3 15/16 - 4 - 4 1/8 - 4 3/16 - 4 1/4 - 4 3/8 - 4 7/16 - 4 1/2 1 X 1/24 5/8 - 4 11/16 - 4 3/4 - 4 7/8 - 4 15/16 - 5 - 5 1/8 - 6 3/16 - 5 1/4 - 5 3/8 - 5 7/16 - 5 1/2 1 1/4 X 5/8

U1*

2 3/8 -2 7/16 - 2 1/2 - 2 9/16 - 2 5/8 - 2 11/16 - 2 3/4 5/8 X 5/162 7/8 - 2 15/16 - 3 - 3 1/8 - 3 3/16 - 3 1/4 3/4 X 3/83 3/8 - 3 7/16 - 3 1/2 - 3 5/8 - 3 11/16 - 3 3/4 7/8 X 7/163 7/8 - 3 15/16 - 4 - 4 1/8 - 4 3/16 - 4 1/4 - 4 3/8 - 4 7/16 - 4 1/2 1 X 1/2

4 5/8 - 4 11/16 - 4 3/4 - 4 7/8 - 4 15/16 - 5 - 5 1/8 - 5 3/16 - 5 1/4 - 5 3/8 - 5 7/16 - 5 1/2 1 1/4 X 5/8

W1*

3 3/8 - 3 7/16 - 3 1/2 - 3 5/8 - 3 11/16 - 3 3/4 7/8 X 7/163 7/8 - 3 15/16 - 4 - 4 1/8 - 4 3/16 - 4 1/4 - 4 3/8 - 4 7/16 - 4 1/2 1 X 1/24 5/8 - 4 3/4 - 4 7/8 - 4 15/16 - 5 - 5 1/8 - 6 3/16 - 5 1/4 - 5 3/8 - 5 7/16 - 5 1/2 1 1/4 X 5/85 5/8 - 5 3/4 - 5 7/8 - 5 15/16 - 6 - 6 1/8 - 6 3/16 - 6 1/4 - 6 3/8 - 6 7/16 - 6 1/2 1 1/2 x 3/46 5/8 - 6 3/4 - 6 7/8 - 6 15/16 - 7 - 7 1/8 - 7 3/16 - 7 1/4 - 7 3/8 - 7 7/16 1 3/4 X 3/4

*PleasecontactBaldor-Maskaforleadtimeandavailability

BU

SH

ING

S &

HU

BS

18

TAPER-LOCK BUSHINGS

TAPER-LOCK BUSHINGS

To Install:

1. Clean all parts of the bushing and bore ofhubthusremovinganyoil,lacquerordirt. Install bushing in hub and match halfholestomakecompleteholes(eachcomplete hole will be threaded on one side only).

2. Oil thread and either the end of set screws or under the head of the cap screws. Install screws loosely in holes that are threaded on the hub side.

3. Makesurethatthebushingisfreeinthehub. Slip assembly onto shaft and align in the desired position.

4. Tighten screws evenly and alternately until the part has tightened. (See table belowforwrenchtorque)

5. Hammer with a block or sleeve thelarge end of the bushing. Re-tighten screws using the correct torque.Repeat this procedure until the screws no longer turn. Fill remaining holes with grease to prevent dirt buildup. To Remove:

1. Remove all screws. Oil thread and either the end of set screws or under the head of cap screws.

2. Insert screws in hole(s) that are threaded on the bushing side (see diagram on fol-lowing page). Note that there will be one extra screw left over.

3. Tighten screws alternately until the bush-ing is loose in the hub. It may be nec-essary to tap on the hub to loosen the bushing.

Bushing No. SCREWSWrench torque

(Pounds-Inches)Wrench torque (Pounds-Feet)

1008, 1108 1/4" Set Screws 55 4.5

1210, 1215, 1310 3/8" Set Screws 175 14.5

1610, 1615 3/8" Set Screws 175 14.5

2012 7/16" Set Screws 280 23.0

2517, 2525 1/2" Set Screws 430 36.0

3020, 3030 5/8" Set Screws 800 67.0

3535 1/2" Cap Screws 1,000 83.0

4040 5/8" Cap Screws 1,700 142.0

4545 3/4" Cap Screws 2,450 204.0

5050 7/8" Cap Screws 3,100 258.0

PROPER WRENCH TORQUE TO TIGHTEN SCREWS

EXAMPLE:2012X1-3/8

2012 X1-3/8

2012: BUSHINGSIZE

The Taper-Lock bushing size isdefined by 4 digits representing two numbers. The first two digits represent the maximum bore size and the second two digits represent the bushing length. For example, product number 1008 has a max. bore of 1.0" and a total length of 0.8"

X1-3/8: BORESIZE(1-3/8")

Bore s ize : Inch bore s izes are designated with the whole inch fol-lowed by the fraction. For example, a 1.5" diameter bore would be 1-1/2. Metric boresizes are designated with MM after themetricdimension(X25MM).

HOW TO ORDER

Availableininches&millimetersFlushmountingSizes10085050


BU

SH

ING

S &

HU

BS

19

TAPER-LOCK BUSHINGS

DIMENSIONS FOR 1008 THRU 5050

Bushing Size

Rating Torque

Capacity (lb - in.)

Hub Diam. Ref. Installation Screw +

G

L * M *Approx.

Wt. (lbs)A B C D Qty Size

Std Hex Key

Short Key

Std Hex Key

Short Key

1008 1,200 1 3/8 7/8 2 3/16 1 21/64 2 1/4 x1/2 1 1/8 5/8 1 1/4 3/4 0.2

1108 1,300 1 1/2 7/8 2 5/16 1 29/64 2 1/4 x1/2 1 1/8 5/8 1 1/4 3/4 0.2

1210 3,600 1 7/8 1 3 1/4 1 3/4 2 3/8 x 5/8 1 3/8 13/16 1 5/8 1 1/16 0.5

1215 3,550 1 7/8 1 1/2 2 7/8 1 3/4 2 3/8 x 5/8 1 3/8 13/16 1 5/8 1 1/16 0.3

1310 3,850 2 1 3 3/8 1 7/8 2 3/8 x 5/8 1 3/8 13/16 1 5/8 1 1/16 0.6

1610 4,300 2 1/4 1 3 5/8 2 1/8 2 3/8 x 5/8 1 3/8 13/16 1 5/8 1 1/16 0.7

1615 4,300 2 1/4 1 1/2 3 1/4 2 1/8 2 3/8 x 5/8 1 3/8 1 3/16 1 5/8 1 11/16 1.0

2012 7,150 2 3/4 1 1/4 4 3/8 2 5/8 2 7/16 x 7/8 1 9/16 15/16 2 1 3/8 1.4

2517 11,600 3 3/8 1 3/4 4 7/8 3 1/4 2 1/2 x 1 1 5/8 1 2 1/4 1 5/8 3.1

2525 11,300 3 3/8 2 1/2 4 1/2 3 1/4 2 1/2 x 1 1 5/8 1 2 1/4 1 5/8 3.5

3020 24,000 4 1/4 2 6 1/4 4 2 5/8 x 1 1/4 1 13/16 1 3/16 2 11/16 2 1/16 5.0

3030 24,000 4 1/4 3 5 3/4 4 2 5/8 x 1 1/4 1 13/16 1 3/16 2 11/16 2 1/16 7.4

3535 44,800 5 3 1/2 7 4 27/32 3 1/2 x 1 1/2 39 2 1 5/16 3 3/8 2 11/16 9.8

4040 77,300 5 3/4 4 8 1/2 5 35/64 3 5/8 x 1 3/4 40 2 3/8 1 5/8 4 1/8 3 3/8 15.4

4545 110,000 6 3/8 4 1/2 9 1/2 6 1/8 3 3/4 x 2 40 2 5/8 1 15/16 4 3/4 4 1/16 21.0

5050 126,000 7 5 10 1/2 6 23/32 3 7/8 x 2 1/4 37 2 13/16 2 5/16 5 1/4 4 13/16 29.0

+ Use in position shown in drawing above for tightening bushing on shaft. When loosening bushing, remove screws and use all except one in the other holes.* Space required to remove bushing using jackscrews - no puller required. Standard hex key cut to minimum useable length. Peaktorqueloadsmustnotexceedtorquecapacityratingshown.Capacityvaluesshownareforlightstartingandsteadyrunning

conditions. For more severe duty, divide torque capacity by service factor suggested in table below.Note: Approx. weight in lbs. for an average size bore.

Gray Iron

Service Factor Type of Loading1.0 Light starting & steady running1.5 Light starting & uneven running2.0 Fairly heavy starting & steady or uneven running2.5 Light or heavy starting & moderate shock running3.0 Light or heavy starting & severe shock running, or reversing loads

SERVICE FACTOR

BU

SH

ING

S &

HU

BS

20

BushingList

Price $

Stock Bore Keyseat

1008 11.60

1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1

1/8 x 1/16 3/16 x 3/32 3/16 x 3/32 1/4 x 1/16*

1108 12.00

1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 1 1/16 1 1/8

1/8 x 1/16 3/16 x 3/32 3/16 x 3/32 1/4 x 1/8 1/4 x 1/16*

1210 12.80

1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 1 1/16 1 1/8 1 3/16 1 1/4

1/8 x 1/16 3/16 - 3/32 3/16 - 3/32 1/4 x 1/8 1/4 x 1/8

1215 14.00

1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 1 1/16 1 1/8 1 3/16 1 1/4

1/8 x 1/16 3/16 x 3/32 3/16 x 3/32 1/4 x 1/8 1/4 x 1/8

1310 14.40

1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 1 1/16 1 1/8 1 3/16 1 1/4 1 5/16 1 3/8 1 7/16

1/8 x 1/16 3/16 x 3/32 3/16 x 3/32 1/4 x 1/8 1/4 x 1/8 5/16 x 5/32 3/8 x 1/8

1610 14.80

1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 1 1/16 1 1/8 1 3/16 1 1/4 1 5/16 1 3/8 1 7/16 1 1/2 1 9/16 1 5/8 1 11/16

1/8 x 1/16 3/16 x 3/32 3/16 x 3/32 1/4 x 1/8 1/4 x 1/8 5/16 x 5/32 3/8 x 3/16 3/8 x 1/8*

1615 15.40

1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 1 1/16 1 1/8 1 3/16 1 1/4 1 5/16 1 3/8 1 7/16 x 1 1/2 1 9/16 1 5/8 1 11/16

1/8 x 1/16 3/16 x 3/32 3/16 x 3/32 1/4 x 1/8 1/4 x 1/8 5/16 x 5/32 3/8 x 3/16 3/8 x 1/8*

2012 20.00

1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 1 1/16 1 1/8 1 3/16 1 1/4 1 5/16 1 3/8 1 7/16 1 1/2 1 9/16 1 5/8 1 11/16 1 3/4 1 13/16 1 7/8 1 15/16 2 2 1/8

1/8 x 1/16 3/16 x 3/32 3/16 x 3/32 1/4 x 1/8 1/4 x 1/8 5/16 x 5/32 3/8 x 3/16 3/8 x 3/16 1/2 x 1/4 1/2 x 3/16* 1/2 x 1/8*

STANDARD STOCK BORES (INCHES)

BushingList

Price $

Stock Bore Keyseat

2517 24.60

1/2 5/8 11/16 3/4 13/16 7/8 15/16 1 1 1/16 1 1/8 1 3/16 1 1/4 1 5/16 1 3/8 1 7/16 1 1/2 1 9/16 1 5/8 1 11/16 1 3/4 1 13/16 1 7/8 1 15/16 2 2 1/16 2 1/8 2 3/16 2 1/4 2 5/16 2 3/8 2 7/16 2 1/2 2 5/8 2 11/16

1/8 x 1/16 3/16 - 3/32 3/16 - 3/32 1/4 x 1/8 1/4 x 1/8 5/16 x 5/32 3/8 x 3/16 3/8 x 3/16 1/2 x 1/4 1/2 x 1/4 1/2 x 1/4 5/8 x 3/16* 5/8 x 3/16*

2525 36.40

3/4 7/8 1 1 1/8 1 3/16 1 1/4 1 3/8 1 7/16 1 1/2 1 5/8 1 11/16 1 3/4 1 13/16 1 7/8 1 15/16 2 2 1/8 2 3/16 2 1/4 2 5/16 2 3/8 2 7/16 2 1/2

3/16 x 3/32 1/4 x 1/8 1/4 x 1/8 5/16 x 5/32 3/8 x 3/16 3/8 x 3/16 1/2 x 1/4 1/2 x 1/4 1/2 x 1/4 5/8 x 3/16* 5/8 x 3/16*

3020 37.00

7/8 15/16 1 1 1/8 1 3/16 1 1/4 1 5/16 1 3/8 1 7/16 1 1/2 1 9/16 1 5/8 1 11/16 1 3/4 1 13/16 1 7/8 1 15/16 2 2 1/16 2 1/8 2 3/16 2 1/4 2 5/16 2 3/8 2 7/16 2 1/2 2 5/8 2 11/16 2 3/4 2 13/16 2 7/8 2 15/16 3 3 1/8 3 3/16 3 1/4

3/16 x 3/32 1/4 x 1/8 1/4 x 1/8 5/16 x 5/32 3/8 x 3/16 3/8 x 3/16 1/2 x 1/4 1/2 x 1/4 1/2 x 1/4 5/8 x 5/16 5/8 x 5/16 5/8 x 5/16 3/4 x 1/4* 3/4 x 1/4*

3030 54.00

15/16 1 1 1/8 1 3/16 1 1/4 1 5/16 1 3/8 1 7/16 1 1/2 1 9/16 1 5/8 1 11/16 1 3/4 1 13/16 1 7/8 1 15/16 2 2 1/16 2 1/8 2 3/16 2 1/4 2 5/16 2 3/8 2 7/16 2 1/2 2 5/8 2 11/16 2 3/4 2 7/8 2 15/16 3 3 1/8 3 3/16 3 1/4

1/4 x 1/8 1/4 x 1/8 5/16 x 3/32 3/8 x 3/16 3/8 x 3/16 1/2 x 1/4 1/2 x 1/4 1/2 x 1/4 5/8 x 5/16 5/8 x 5/16 5/8 x 5/16 3/4 x 1/4* 3/4 x 1/4*

* Shallow keyseat For all bore sizes key not supplied

TAPER-LOCK BUSHINGS

BU

SH

ING

S &

HU

BS

21

TAPER-LOCK BUSHINGS

BushingList

Price $

Stock Bore Keyseat

3535 76.00

1 3/16 1 1/4 1 3/8 1 7/16 1 1/2 1 5/8 1 11/16 1 3/4 1 7/8 1 15/16 2 2 1/8 2 3/16 2 1/4 2 3/8 2 7/16 2 1/2 2 5/8 2 11/16 2 3/4 2 7/8 2 15/16 3 3 1/8 3 3/16 3 1/4 3 5/16 3 3/8 3 7/16 3 1/2 3 5/8 3 11/16 3 3/4 3 7/8 3 15/16

1/4 x 1/8 5/16 x 5/32 3/8 x 3/16 3/8 x 3/16 1/2 x 1/4 1/2 x 1/4 5/8 x 5/16 5/8 x 5/16 3/4 x 3/8 3/4 x 3/8 7/8 x 1/4* 7/8 x 1/4* 7/8 x 1/4* 1 x 1/4*

4040 122.00

1 7/16 1 1/2 1 5/8 1 11/16 1 3/4 1 7/8 1 15/16 2 2 1/8 2 3/16 2 1/4 2 3/8 2 7/16 2 1/2 2 5/8 2 11/16 2 3/4 2 7/8 2 15/16 3 3 1/8 3 3/16 3 1/4 3 3/8 3 7/16 3 1/2 3 5/8 3 11/16 3 3/4 3 7/8 3 15/16 4 4 1/8 4 3/16 4 1/4 4 3/8 4 7/16

3/8 x 3/16 3/8 x 3/16 1/2 x 1/4 1/2 x 1/4 5/8 x 5/16 5/8 x 5/16 3/4 x 3/8 3/4 x 3/8 7/8 x 7/16 7/8 x 7/16 7/8 x 1/4* 1 x 1/4* 1 x 1/4* 1 x 1/4*

4545 152.00

1 15/16 2 2 3/16 2 3/8 2 7/16 2 5/8 2 3/4 2 7/8 2 15/16 3 3 1/8 3 3/16 3 1/4 3 3/8 3 7/16 3 1/2 3 5/8 3 3/4 3 7/8 3 15/16 4 4 1/8 4 3/16 4 1/4 4 3/8 4 7/16 4 1/2 4 3/4 4 7/8 4 15/16

1/2 x 1/4 5/8 x 5/16 5/8 x 5/16 3/4 x 3/8 3/4 x 3/8 7/8 x 7/16 7/8 x 7/16 1 x 1/2 1 x 1/2 1 x 1/4* 1 1/4 x 1/4*

5050 246.00

2 7/16 2 11/16 2 15/16 3 3/8 3 7/16 3 5/8 3 7/8 3 15/16 4 4 1/4 4 3/8 4 7/16 4 1/2 4 7/8 4 15/16 5

5/8 x 5/16 3/4 x 3/8 7/8 x 7/16 1 x 1/2 1 x 1/2 1 x 1/2 1 1/4 x 7/16*

STANDARD STOCK BORES (INCHES)

* Shallow keyseat For all bore sizes key not supplied

BU

SH

ING

S &

HU

BS

22

TAPER-LOCK BUSHINGS

BushingList

Price $Stock Bore Key

1008 11.6014 16 18 19 20 22 (24)

5 x 5 6 x 6 8 x 7

1108 12.00

(12) 14 (15) 16 18 19 20 22 24 25

4 x 4 5 x 5 6 x 6 8 x 7

1210 12.80

14 (15) 16 18 19 20 22 24 25 28 30 (32)

5 x 5 6 x 6 8 x 7

10 x 8

1215 14.00

16 19 20 24 25 28 30 32

5 x 5 6 x 6 8 x 7

10 x 8

1310 14.40

14 16 18 19 20 22 24 25 28 30 32 35

5 x 5 6 x 6 8 x 7

10 x 8

1610 14.80

14 16 18 19 20 22 24 25 28 30 32 35 38 40

5 x 5 6 x 6 8 x 7

10 x 8 12 x 8

1615 15.40

12 14 15 16 18 19 20 22 24 25 28 30 32 35 36 38 39 40 42

4 x 4 5 x 5 6 x 6 8 x 7

10 x 8 12 x 8

12 x 7*

2012 20.00

14 16 18 19 20 22 24 25 28 30 32 35 38 40 42 45 48

5 x 5 6 x 6 8 x 7

10 x 8 12 x 8 14 x 9

2517 24.60

14 16 18 19 20 22 24 25 28 30 32 35 38 40 42 45 48 50 55 60 65

5 x 5 6 x 6 8 x 7

10 x 8 12 x 8 14 x 9

16 x 10 18 x 11

STANDARD STOCK BORES (MILLIMETERS)Bushing

List Price $

Stock Bore Key

2525 36.40

19 20 22 24 25 28 30 32 35 36 38 39 40 42 45 48 50 55 60

6 x 6 8 x 7

10 x 8 12 x 8 14 x 9

16 x 10 18 x 11

3020 37.00

24 25 28 30 32 35 38 40 42 45 48 50 55 60 65 70 75

8 x 7 10 x 8 12 x 8 14 x 9

16 x 10 18 x 11 20 x 12

3030 54.00

22 24 25 28 30 32 35 36 38 39 40 42 45 48 50 55 60 65 70 75

6 x 6 8 x 7

10 x 8 12 x 8 14 x 9

16 x 10 18 x 11 20 x 12

3535 76.00

35 38 40 42 45 48 50 55 60 65 70 75 80 85 90

10 x 8 12 x 8 14 x 9

16 x 10 18 x 11 20 x 12 22 x 14 25 x 14

(4040) 122.00

48 55 60 65 70 75 80 85 90 95 100 110

14 x 9 16 x 10 18 x 11 20 x 12 22 x 14 25 x 14 28 x 16

(4545) 152.00

55 60 65 70 75 80 85 90 95 100 105 110 115 120

16 x 10 18 x 11 20 x 12 22 x 14 25 x 14 28 x 16 32 x 18

(5050) 246.00

55 60 65 70 75 80 85 90 95 100 110 115 120 125

16 x 10 18 x 11 20 x 12 22 x 14 25 x 14 28 x 16 32 x 18

( ) = Contact Baldor for availability* Shallow keyseatFor all bore sizes key not supplied

BU

SH

ING

S &

HU

BS

23

SHORT QD BUSHINGS

SHORT QD BUSHINGSUsage:Forapplicationswhenthefullborelengthisnotneeded,suchasinconveyorapplicationsorwitharollerchainsprocket.

Bushing Stock Bore KeyseatApprox.

Weight (lbs.)

JS

2 7/162 15/163 7/163 15/164 7/16

5/8 x 5/163/4 x 3/87/8 x 7/161 x 3/8**1 x 1/8**

20.018.115.914.311.5

MS3 7/163 15/16 4 7/164 15/16 5 7/16

7/8 x 7/161 x 1/21 1/4 x 1/4**

41.235.328.4

NS

3 15/16 4 7/164 15/165 7/165 15/16 6

1 x 1/21 1/4 x 5/81 1/4 x 1/4**1 1/2 x 1/8**

59.446.543.938.9

STANDARD STOCK BORES

* Stocked in rough bore only. Can be rebored from 4-15/16" to 10" max. ** Shallow keyseat. Key provided with these sizes only.

All sizes with a shallow keyseat are in DUCTILE iron for greater strength

Same features as the standard QD bushing with the exception that the total length is reduced to adapt to a QD weld-on hub

Full, not partial split

Sizes J, M, N, P, W (S is available in rough bore only)


DIMENSIONSBushing

SizeList Price

$Dimensions - Inches Bore range Installation Screw

A B D E L M Min. Max. Qty SizeJS 144.00 1 5 5/32 7 1/4 2 3/8 3 3/8 6 1/4 2 7/16 4 7/16 3 5/8-11NC X 2-1/2MS 288.00 1 3/16 6 1/2 9 1/8 3 5/8 4 13/16 7 7/8 3 7/16 5 7/16 4 3/4-10NC X 3NS 504.00 1 1/2 7 10 4 1/2 6 8 1/2 3 15/16 6 4 7/8-9NC X 3-1/2PS 756.00 1 1/2 8 1/4 11 3/4 5 6 1/2 10 4 15/16 7 4 1-8NC X 4WS 1332.00 1 3/4 10 7/16 15 5 1/2 7 1/4 12 3/4 5 7/16 8 1/2 4 1 1/8-7NC X 5SS * 2 12 1/8 17 3/4 6 3/4 8 3/4 15 4 15/16* 10* 5 1/1/4-7NC X 5

* Stocked in rough bore only. Can be rebored from 4-15/16" to 10" max. Contact Baldor for price and delivery

EXAMPLE:MSX4-7/16MS X4-7/16

MS: BUSHINGSIZEX4-7/16: BORESIZE(4-7/16") Inch bore sizes are designated with the whole inch folowed by

the fraction. For example, a 1.5" diameter bore would be 1-1/2.

HOW TO ORDER

Note: Refer to QD Bushing Mounting page for installation instructions. (pg. 9)

Bushing Stock Bore KeyseatApprox.

Weight (lbs.)

PS

4 15/16 5 7/165 15/16 66 7/16 6 1/26 15/16 7

1 1/4 x 5/81 1/2 x 3/41 1/2 x 1/4**1 3/4 x 1/8**

84.877.969.560.9

WS

5 7/165 15/16 6 7/16 6 1/26 15/16 7 7 1/27 15/16 8 8 7/16 8 1/2

1 1/4 x 5/81 1/2 x 3/41 3/4 x 3/42 x 1/4**

172.3156.4138.6116.5

SS 4 15/16RB* None 280.0

Taper 3/4" per FT on Diameter -B-

Bushing JS

Bushing MS to WS Inclusive

Bushing SS

BU

SH

ING

S &

HU

BS

24

QD WELD-ON HUBS

QD WELD-ON HUBSUsage:Formanyapplications,suchasconveyordrumpulleys,rotors,platesprockets,impellers,etc.

BaldorMaska QD weld-on hubs are made of low carbon steel for its excellent welding properties, and are compatible with all standard QD bushings, with the exception of SD.


EXAMPLE:H-M

H M

H: QDWELD-ONHUB

M: HUBSIZE(RELATEDTOQDBUSHING)

HOW TO ORDER

BU

SH

ING

S &

HU

BS

25

QD WELD-ON HUBS

DIMENSIONSPart No.

List Price $

Fits Bushing

TypeDimensions - Inches Bore

RangeApprox. WeightD* L P L1 BC

H-L 9.00 L 1 2.375 0.88 2.50 0.17 2 3/8 to 1 1/2" 0.6H-CL 9.00 L 1 2.375 0.88 2.50 0.63 2 3/8 to 1 1/2" 0.6H-JA 9.00 JA 2 2.250 0.56 ... ... 1 21/32 1/2 to 1 1/4" 0.4H-SH 15.00 SH 2 3.000 0.81 ... ... 2 1/4 1/2 to 1 11/16" 1

H-SDS 14.00 SDS 2 3.500 0.75 ... ... 2 11/16 1/2 to 2" 1.2H-SK 27.00 SK 2 4.375 1.25 ... ... 3 5/16 1/2 to 2 5/8" 3H-SF 35.00 SF 2 5.000 1.25 ... ... 3 7/8 1/2 to 2 15/16" 4H-E 72.00 E 2 6.250 1.63 ... ... 5 7/8 to 3 1/2" 8.3H-F 120.00 F 2 7.000 2.50 ... ... 5 5/8 1 to 4" 15.5H-J 175.00 J 2 7.750 3.19 ... ... 6 1/4 1 7/16 to 4 1/2" 22.7H-M 310.00 M 3 9.250 5.19 9.50 3.56 7 7/8 2 to 5 1/2" 50H-N 460.00 N 3 10.250 6.25 10.50 4.50 8 1/2 2 3/4 to 6" 77H-P 1460.00 P 2 13.000 7.25 ... ... 10 2 15/16 to 7" 155H-W 2300.00 W 2 15.500 9.00 ... ... 12 3/4 4 1/4 to 8 1/2" 260

Part No.List Price

$Fits

Bushing

Dimensions - InchesBore

RangeApprox. WeightD* L P L1 BC

HD-SH 17.00 SH 2.8125 0.750 3.063 0.375 2-1/4 1/2" TO 1-11/16" 0.87

HD-SDS 16.00 SDS 3.375 0.750 3.625 0.375 2-11/16 1/2" TO 2" 1.27

HD-SK 35.00 SK 4.375 1.125 4.750 0.500 3-5/16 1/2" TO 2-5/8" 3.34

HD-SF 46.00 SF 5.000 1.250 5.250 0.625 3-7/8 1/2" TO 2-15/16" 4.67

HD-E 88.00 E 6.250 1.500 6.500 0.875 5 7/8" to 3-1/2" 8.72

HD-F 140.00 F 6.625 1.750 6.938 1.063 5-5/8 1" to 4" 10.3

Mounting: Type 1: Reverse mount only Type 2 & 3: Standard and Reverse mount : Standard mount only *Tolerance: H-L & H-CL = (+0.001"/-0.005") H-JA thru H-J = (+0.000"/-0.002") H-M thru H-W = (+0.000"/-0.003")

*Tolerance: = +0.000" / -0.002"

Type 3Type 2Type 1

45o

45o45o

30o

90o

75o

HD-SHtoHD-F

P

L

L1

DBC

BU

SH

ING

S &

HU

BS

26

XT BUSHINGS

XT BUSHINGS

2"/ft. taper for easy on, easy off In steel, Ductile iron & gray cast iron


For the first month of operation, inspect bushings and capscrews for proper seat-ing at least once a week and thereafter during periodic shut down.

IMPORTANT REMINDER

XTB15 TO XTB80 INCLUSIVE

XTB100 XTB120 SECTION A-A Taper 2" per ft. on diameter -B-

Usage: This product is specially designed for conveyor pulley applications.

EXAMPLE:XTB20X2

XTB 20

XTB: XTBUSHING

20: BUSHINGSIZE Means that the maximum bore for this

bushing is 2.0"

X2: BORESIZE(2") Inch bore sizes are designated with the whole

inch following by fraction. For example, a 1.5" diameter bore would be 1-1/2.

HOW TO ORDER

X2

A

A

BC

A

A

BC

A

A

BC

LA

DB

BU

SH

ING

S &

HU

BS

27

XT BUSHINGS

DIMENSIONS

Bushing Size

List Price $

Dimensions - Inches Bolts Recommended Wrench

Torque (ft-lbs)

Approx. WeightA B D L BC QTY Size

XTB15 16.00 3/8 2.000 2 7/8 1 1/8 2 7/16 4 1/4-20NC x 1" 7.9 0.7

XTB20 33.00 15/32 2.688 3 3/4 1 13/32 3 3/16 4 5/16-18NC x 1-1/4" 16.7 1.5

XTB25 58.00 5/8 3.188 4 7/16 1 7/8 3 3/4 4 3/8-16NC x 1 3/4" 29.2 2.6

XTB30 87.00 11/16 3.875 5 5/16 2 1/16 4 9/16 4 7/16-14NC x 1 1/2" 45.8 4.2

XTB35 139.00 25/32 4.688 6 5/16 2 15/32 5 7/16 4 1/2-13NC x 1 3/4" 70 7.4

XTB40 190.00 7/8 5.313 7 1/8 2 13/16 6 1/8 4 9/16-12NC x 2" 100 10.5

XTB45 271.00 15/16 5.938 8 3 5/16 6 7/8 4 5/8-11NC x 2-1/4" 140 14.8

XTB50 490.00 1 7.250 10 1/8 3 3/4 8 5/16 4 3/4-10NC x 2 1/2" 250 27.8

XTB60 673.00 1 1/8 8.625 11 15/16 4 1/8 9 7/8 4 7/8-9NC x 2-1/2" 400 42.8

XTB70 887.00 1 5/16 10.000 13 15/16 4 11/16 11 9/16 4 1-8NC x 3" 600 66.3

XTB80 1719.00 1 3/8 11.125 15 5/8 5 1/8 12 7/8 4 1 1/8-7NC x 3 1/2" 750 85.7

XTB100 2243.00 1 9/16 13.688 17 15/16 6 3/16 15 9/16 6 1 1/8-7NC x 3 1/2" 750 146

XTB120 3194.00 1 3/4 16.188 20 5/8 7 1/16 18 3/16 8 1 1/8-7NC x 3 1/2" 750 216

STANDARD STOCK BORES

* These bushings are ductile iron; all others are cast iron.** Key provided with these sizes only.

Bushing Stock Bore Keyseat

XTB15

5/8* 3/4* 7/8*1* 1 1/8* 1 3/16* 1 1/4*1 7/16* 1 1/2*

3/16 x 3/321/4 x 1/8 1/4 x 1/83/8 x 1/8**

XTB20

3/41 1 3/16 1 1/41 7/16 1 1/2 1 11/161 15/16* 2*

3/16 x 3/321/4 x 1/83/8 x 3/16 3/8 x 3/161/2 x 3/16**

XTB25

1 1 3/16 1 1/41 7/16 1 1/2 1 11/161 15/16 2 2 3/16*2 7/16*

1/4 x 1/83/8 x 3/161/2 x 1/45/8 x 1/8**

XTB30

1 7/16 1 1/21 15/16 2 3/162 7/16 2 11/16*2 15/16*

3/8 x 3/161/2 x 1/45/8 x 5/163/4 x 3/16**

XTB35

1 15/16 2 3/162 7/16* 2 11/16*2 15/16*3 7/16*

1/2 x 1/45/8 x 5/163/4 x 3/87/8 x 5/16**

Bushing Stock Bore Keyseat

XTB40

2 7/162 15/163 7/16*3 15/16*

5/8 x 5/163/4 x 3/87/8 x 7/161 x 3/8**

XTB453 7/163 15/16*4 7/16*

7/8 x 7/161 x 1/21 x 3/8**

XTB503 15/16 4 7/164 15/16

1 x 1/21 1/4 x 5/8

XTB605 7/16 5 1/25 15/16 6

1 1/4 x 5/81 1/2 x 3/4

XTB706 7/16 6 1/26 15/16 7

1 1/2 x 3/41 3/4 x 3/4

XTB807 1/2 7 15/16 8

1 3/4 x 3/42 x 3/4

XTB1008 1/2 99 7/16 9 1/2 10

2 x 3/42 1/2 x 7/8

XTB12010 1/2 1111 1/2 12

2 1/2 x 7/83 x 1

BU

SH

ING

S &

HU

BS

28

XT HUBS

XT HUBS

DIMENSIONS

Hub No. List Price $Fits

Bushing

Dimensions - Inches Tapped Holes Approx. WeightD* L B P L BC No. Size

XTH15 8.00 XTB15 2.875 5/8 2.000 3.190 7/16 2 7/16 4 1/4-20NC 0.7XTH20 15.00 XTB20 3.813 13/16 2.688 4.065 9/16 3 3/16 4 5/16-18NC 1.5XTH25 25.00 XTB25 4.375 1 1/8 3.188 4.690 13/16 3 3/4 4 3/8-16NC 2.6XTH30 43.00 XTB30 5.750 1 1/4 3.875 5.940 7/8 4 9/16 4 7/16-14NC 4.1XTH35 55.00 XTB35 6.345 1 1/2 4.688 6.565 1 1/16 5 7/16 4 1/2-13NC 6.6XTH40 85.00 XTB40 7.250 1 3/4 5.313 7.563 1 1/4 6 1/8 4 9/16-12NC 10.7XTH45 109.00 XTB45 8.000 2 1/8 5.938 8.315 1 1/2 6 7/8 4 5/8-11NC 15.4XTH50 173.00 XTB50 9.563 2 1/2 7.250 9.940 1 3/4 8 5/16 4 3/4-10NC 24.9XTH60 267.00 XTB60 11.250 2 3/4 8.625 11.690 1 15/16 9 7/8 4 7/8-9NC 36.4XTH70 334.00 XTB70 13.188 3 1/8 10.000 13.628 2 3/16 11 9/16 4 1-8NC 57.7XTH80 425.00 XTB80 14.625 3 7/16 11.125 14.940 2 7/16 12 7/8 4 1 1/8-7NC 75.6XTH100 699.00 XTB100 17.500 4 1/8 13.688 17.940 3 15 9/16 6 1 1/8-7NC 122XTH120 1059.00 XTB120 20.500 4 13/16 16.188 20.940 3 1/2 18 3/16 8 1 1/8-7NC 189

* Tolerance: (+0.000"/-0.005")

XTH120 Section A-A Taper 2" per ft. on Diameter -B-

XTH15 to XTH80 Inclusive

XTH100

Conveyor Drum

Application

Usage:XThubsareforusewiththeXTBushing.

2"/ft. taper for easy on, easy off Made of low carbon steel for its excellent welding

properties


EXAMPLE:XTH20

XTH

HOW TO ORDER

20

XTH: XTHUB

20: HUBSIZE Related to the XT bushing

A

A

BC

A

A

BC

A

A

BC

LL1

DB

P

29

SH

EA

VE

SGENERAL SHEAVES INFORMATION

LightDutyAdjustablePitchClassicalV-beltNarrowV-belt

Elasticity of belts helps shock load dampening Good mechanical efficiency Long-life expectancy when well designed Quiet, smooth operation; no lubrification required Easy and economical installation Clean and low maintenance


GENERAL INFORMATION

V-BELT DRIVE SHEAVES

DO NOT use these gray cast iron sheaves with rim speeds in excess

of 6500 feet per minute. Note that the maximum RPM indicated on the

sheave is based on the 6500 ft/min. limit and doesnt take into consider-

ation the need for dynamic balancing (two planes). Please refer to the chart on

page 30 to verify the validity of dynamic balancing in your application.

All operational PT products when used in a drive are potentially danger-

ous and must be guarded by the user as required by applicable laws,

regulations, standards and good safety practice. (Refer to ANSI Standard B15.1)

IMPORTANT REMINDER

DYNAMIC BALANCINGWhen ordering a sheave to be dynamically balanced, you must specify the sheave operational speed. Baldor recommends ordering the matching bushing with the sheave to ensure a balancing grade of G6.3. If the bushing is not ordered at thesame time, a disclaimer will be sent to the customer discharging Baldor from possible vibration problems related to the drive.

30

SH

EA

VE

S

GENERAL SHEAVES INFORMATION

BALANCING STANDARDSNOMOGRAPH

This nomograph shows the maximum speed limit (in RPM) for a gray cast iron standard statically balanced pulley of a given diameter and face width. To exceed this speed limit, the pulley should also be dynamically balanced.

Example: If you have a 6-8V14.0 pulley (see 8V section) with a diameter of 14" and a face width of71/8",anditmustturnat1,800RPM,whattypeofbalancingisrequired?

Answer:Asshown,thelimitforthispulleywouldbe1,500RPM,thereforeitmustbedynamicallybalanced.

2

2

2

2

21 3 4 5 6 7 8 9 10 15 20 25 30

5 10 15 20

2015105

5 10 15 20

5 10 15 20D

C

B

A

BELT SECT.

4

5

6

7

8

9

10

15

20

25

30

40

50

60

3V

5V

8V

2

2

2

5

5

5

10

10

10

15

15

15

19

19

19

400

500

600

700

800

900

100011001200130014001500

1750

200022002400260028003000

3500

4000

45005000

6000

7000

8000

RPM

(REV

OLUT

IONS P

ER M

INUTE

)

NORMAL FACE WIDTH IN INCHES

DIAM

ETER

S IN

INCH

ES

NARROW V-BELT SHEAVES, # OF GROOVES

CONVENTIONAL BELT SHEAVES, # OF GROOVES

31

SH

Documents

28 CA6000 Effective Date: January 2012 PRODUCT CATALOG · residencial pinares de suiza pol. 15 #44, nva. san salvador, el salvador phone: +503 2288-1519 fax: +503 2288-1518. chile