22,000 - 100,000+ LBS.

The P-Series is the premiere liftruck

for all your heavy-duty lifting needs.

At competitive prices, the P-Series comes

STANDARD as a heavy-duty level liftruck

with premium components and features

such as Cummins QSB diesel engine,

Dana transmission, AxleTech drive axle,

electronic fingertip hydraulic controls and

RemoteTech vehicle management system.

Make the P-Series the workhorse of your fleet.

capacity - 60,000 lbs.

capacity - 22,000 lbs. capacity - 36,000 lbs.

capacity - 40,000 lbs. capacity - 45,000 lbs.

Not only is the P-Series extremely eye-appealing,

it has been designed and tested to meet or

exceed current, worldwide regulations for

stability, sound levels and safety.

Hoist’s design engineering staff uses

the latest CAD three-dimensional solid

modeling technology to develop the

highest quality liftruck in terms of

performance, durability, operator safety,

comfort, visibility and serviceability.

Hoist uses many of the same

North American components

throughout its product line to keep

costs low and make parts immediately

available 24-hours a day.

IINNNNOOVVAATTIIVVEE DDEESSIIGGNN

capacity - 80,000 lbs.

For maximum performance, an operator must have all the essential tools around them. The P-Series is designed with advanced ergonomics for maximum comfort and visibility.

Standard features

- Meets ANSI B56.1 FOPS operator protection

- Isolated rubber mounts between cab & chassis

- True inching control pedal

- Finger-tip hydraulic controls designed to move

within the full range of seating positions

- Key-lock doors and greaseable hinges

Exterior locks secure door in open position

- Tilt-steering column. Easy entry and exit

- Adjustable air-ride seat and retractable seat belts

- Low, 18-inch, non-skid steps

- Insulated floor, ceiling and doors

- Tinted glass that minimize glare. Front/rear wipers

- Top glass shade with steel overhead guard

- Cab heater with defroster and fan. Optional air

conditioning unit available

- Directional/gear-shift lever on steering column

- Front/rear, individually controlled window wipers.

- Gauges/auxiliary controls located on dashboard.

An MD3 display shows hour meter, engine coolant

temperature, oil and fuel levels, low battery,

engine temperature and RemoteTech functions

- Spring-applied, hydraulic-released parking brake

OOPPEERRAATTOORR CCOOMMFFOORRTT

2

3

4

5

6

1

2

5

3

4 6 1

New cab/dashboard design coming in mid-2008!

The P-Series is designed with a wide-open mast andunique low-profile counterweight to provide the operator

with unobstructed views in all directions.

The P-Series’ two-stage, wide-view mast (optional three-stage

mast available) is made with welded-nested channels with lift

cylinders secured directly behind the mast rails and the lift

chain and optional attachment hosing located inside the inner

mast rail completely out of the operator’s view.

- Standard mid-tilt cylinders provide excellent stability

and visibility. Overhead tilt cylinders optional.

- Main rollers are lubricated and sealed.

- Main/side thrust rollers reduce friction; impact-resistant.

- Mast pivots constructed with wear-resistant bronze bushings

and hardened steel pins. Mast pivots are also greaseable.

- Accumulator in lift circuit reduces shock on mast and load.

- Flow control built into the base of lift cylinders provide

controlled lowering in the event of a hose failure.

- Chrome-plated rods on cylinders for easy seal replacement.

The standard low-profile carriage includes pin-mount,

machine-contoured forks [located in low or high position]

that provide maximum strength, visibility and no load dam-

age. Slope pilers, side-shifting fork positioners and side-

shifts are optional.

SSUUPPEERRIIOORR VVIISSIIBBIILLIITTYY

Mid-tilt cylinders standard Overhead-tilt cylinders optional

- 5.7L, 6.7L, 8.3L and M11 available depending on capacity

- Electronic engine diagnostics with fault code history

- Two-stage heavy-duty air cleaner with restriction indicator

- Heavy-duty isolated anti-vibration bolt in drive line mounts

- Inboard (outboard on higher capacity) muffler with optional purifier

- Bolted open-core radiator with high-capacity cooling system

- Built-in shut down system

- 100-amp alternator with built-in regulator (amps vary w/capacity)

- Optional GM 5.7 LP gas engine available

The high-performance Cummins QSB electronic turbo-

charged engine is proven to standup to the most rugged

applications. The diesel engine meets current emission stan-

dards and is extremely quiet.

The Dana 32,000, three-speed automatic transmission has a true

inching system, giving the operator precise vehicle control. The

quality transmission reduces premature failure, as well as pre-

vents shifting until travel speed is less than 1 mph.

The load-sensing hydraulic system performs heavy-duty tasks

quietly while reducing power demands. It delivers responsive

braking and steering functions, as well as prevents the engine

from stalling when any hydraulics function deadlocks.

- Transmission cooling through a built-in heat exchanger

in lower tank of radiator.

- Transmission oil is filtered through a conveniently

remote-mounted filter.

- 12-plate modulation for smooth forward/reverse shifting

and added durability.

- Remote-mounted filter purifies oil efficiently and safely.

- O-ring face seal fittings on entire system to prevent oil leaks.

- Tilt-lock valve with counterbalance to prevent mast twist.

- Large hydraulic tank with suction strainers and high-capacity

return line filters for maximum efficiency. Filters are easily

accessible for quick replacement.

- Large clean-out covers on the top of tank for easy access.

- Sump tank provides cooling, integral to chassis-easy maintenance.

- Multi-gauge provides quick and easy pressure readings with a twist

of the dial. Eliminates need to tap into hydraulic lines.

PPOOWWEERR &&RREELLIIAABBIILLIITTYYThe P-Series carries the Hoist reputation of reliable and durable

liftrucks. While some high-quality components are optional onother liftrucks, Hoist makes them standard for a true heavy-duty

forklift and to exceed customer expectations.

- Standard 12-volt electrical system throughout forklift

- All electrical wires are color-coded and enclosed with a split-tubing wire-loom wrap using sealed weather pack

connectors to protect against abrasion and located inside a sealed enclosure inside the cab for maximum protection

- Two 12-volt, industrial batteries mounted in the lower flip-open step compartment for easy accessibility

- Manual reset circuit breakers and anti-restart ignition switch

- Electrical system controls the LED headlights, tail lights, turn signals, backup lights, market lights, brake lights and LED

amber strobe light. All lights are completed sealed and last 10,000 hours

RREEMMOOTTEETTEECCHHUtilizing CANbus technology, RemoteTech is a vehicle management system incorporated into the P-Series that provides

superior serviceability, preventative maintenance, vehicle monitoring, automated customer support and the ability to cus-

tomize vehicle functionality. When an issue is detected, RemoteTech will automatically record the issue and notify the oper-

ator via MD3 display inside the cab, as well as via email sent to authorized personnel list detailing vital information of the

issue. Service technicians can also quickly identify issues through electronic diagnostics and view fault code history. Many

vehicle functions can be adjusted remotely, via modem, to an operator and/or company’s preference in minutes.

Issue(s) detected by RemoteTech Operator notified

Issue(s) addressed by service tech Authorized personnel notified

- Unlike similar systems that rely on third-party

companies to program and operate the system,

RemoteTech is programmed and operated by Hoist .

Customization and adjustments are made quickly

to customer’s preference.

- Decrease downtime and repair costs by indentifying

and resolving issues early.

- Parameters such as vehicle/lifting speeds and electronic

fingertip control functions can be adjusted remotely.

- Detect issues such as clogged/failing filters,

overheated engine, and vehicle overload and impact.

- Great for fleet management. Record and monitor engine

hours, service intervals and operator usage. Limit

access to specific operators with key code capabilities.

- 100% welded steel chassis with heavy steel cross supports provides

strength and durability for heavy loads and rough environments

- Low chassis side plate allows easy access to the drive train

- Welded and cast counterweight designs are low-profile for superior

visibility and increased maneuverability

- Fuel and hydraulic tanks integral into chassis providing maximum

protection, simplified hosing, convenient fill points and excellent

heat dissipation

- Integrated lifting points for maximum safety and durability

- Two-part rust-inhibiting polyurethane base coat and two-part

polyurethane top coat for corrosion protection

Hoist’s quality line of liftrucks starts with a strong foundation. The P-Series chassis provides strength and durability while distributing weight evenly throughout the liftruck. The low-profile counterweight is available as a cast or welded counterweight.

The advanced design allows the P-Series to be compact and maneuverable, yet strong enough to lift heavy loads.

UUNNPPAARRAALLLLEELLEEDDSSTTRREENNGGTTHH

Welded counterweight

Cast counterweight

Heavy-duty, industrial steer axle- Thick top plate on steer axle provides added strength and durability

- Highly maneuverable, especially in tight areas

- Dual-action bolt on cylinder is protected by heavy steel support

beams and provides effortless power steering

- Lower maintenance costs due to minimal amount of moving parts

- Easy access to lubrication points

- Sealed tapered roller bearings

- High-impact greaseable composite trunnions

AxleTech planetary drive axle- Specifically designed and rated for durability

in high-capacity applications

- Unit is bolted and dowel-pined in the chassis

- Force-cooled outboard wet disc actuated

brakes, with separately filtered oil. Reduces

premature wear, extending life on brakes

- Brakes can be serviced without removing

entire drive axle

Full capacity ratingsDid you know that you could lose as much as 2,500 lbs. on the rated capacity

if you add a feature such as a side-shifting fork positioner? Not on a Hoist fork-

lift. When you order a Hoist forklift, you receive the FULL capacity even if you

add a feature such as side-shifting fork positioner. So when you order a 36,000

@ 48, you WILL receive a true 36,000 @ 48 forklift.

Hoist manufactures ONLY rugged, heavy-duty forklifts with premium compo-

nents and features, while maintaining competitive prices. We don’t offer various

levels of forklifts, such as light-duty or base-level models. With Hoist, you know

what to expect from our machines — a solid, heavy-duty workhorse.

capacity - 80,000 lbs.

capacity - 22,000 lbs.

Daily checks and routine maintenance are

simple with the easy-lift hood, which is sup-

ported by a gas cylinder. Once open, fluid,

filter and other service points are immediate-

ly within reach.

Hydraulic pressure can be

easily read by lifting up a

flip-open step and twisting

the gauge. This eliminates

downtime due to hydraulic

system issues.

Hoist values its customers and understands the importance of maintaining the quality of the liftruck, as well as providing quick and satisfying service and parts support. The P-Series is designed to allow easy access to all its

integral components for maintenance and repair. Every component on a Hoist liftruck is sourced from the United States,with more than 75% of the components manufactured by Hoist. With more than $5 million in parts inventory in stock,

Hoist is able to have the quickest lead times in the industry and provide excellent 24/7 parts/service support.

SSUUPPEERRIIOORR SSEERRVVIICCEE

Located on both side of the

forklift, flip-open steps allow

quick and easy access to the

complete drive line, batteries

and hydraulic multi-gauge.

Hydraulic oil level-temperature gaugeis located on theside of the liftruckfor easy viewing.

Every Hoist liftruck is backed by a company dedicated to complete customer sat-

isfaction. From the initial contact, through the sale and for as long as you own a

Hoist liftruck, the experienced staff works for you.

Hoist also has a worldwide dealer network that keeps a majority of its replace-

ment parts in stock for immediate pick up or delivery, as well as technicians to

assist with preventative maintenance and repairs. Visit www.hoistlift.com to

locate your nearest Hoist dealer.

- 12-month/2,000-hour warranty [parts and labor]. Optional extended warranties

up to 12,000 hours

- Operator, parts and service manuals included

- 24-hour parts and service support

Hoist’s CNC department,

which consists of more than

10 CNC machines, operates

24 hours a day machining

various parts for components

such as cylinders, steer

axles and wheels. These

CNC machines ensure fast

and accurate machining,

which also assists in superior

lead times and parts support.

The combination of in-house manufacturing and reputable,

domestic vendors, allows Hoist to have the fastest lead times in

the industry -- *8 to 10 weeks! Hoist’s standardization of com-

ponents not only helps with the fast lead times, but more impor-

tantly provides customers with excellent service and parts sup-

port. By providing a single, premium brand such as Cummins

diesel engines and AxleTech drive axles, Hoist is able to provide

maximum support for each component. While other manufactur-

ers may provide a wide range of options, sufficient support for

each of those options may not be consistent.*capacities up to 52,000 lbs.